Error copy PS2 Format Tree format in DMEE tree type PAYM

Hello,
I need to modify the standar format tree PS2 to Portugal, I have created a copy using the transaction DMEE.
I want to change the name of the employee with the number of the employee.
When I run the standar report to get the bank flat file using the copy format, I don't understand why the output is different if I only did a copy without modify nothing.
Output with standar PS2:
PS2108000001300000000077041111EUR20111128 0000000000000000000
PS22040000019002300200007795300000000278525PERIDO MANUEL Wage/salary 40000
PS290540000000000000000000001000000027842500000000000000000000000000000000000000
Output with copy ZPTPY_FCC_PS2
:20:0000000001
:32A:111128EUR2785,25
:53B:/001300000000077041111
:57A:00190023
:59:/001900230020000779530
:PERICO MANUEL
:70:WAGE/SALARY 40213025/201111
Anyone know if it is necessary to do something more after the copy to get the same standar output?
Thank you
Ángel

Hi
Can you compare between the old and new for the filed Carriage return?
Under File data tab in DMEE tcode
If not make them same as earlier
Reg
Vishnu

Similar Messages

WTRE DMEE Tree Format File For France (Withholding Tax for France)

Hello,
I have to implement withholding tax for France on SAP 4.6C environment
I would like to generate and to send a file to administration
I m using generic withholding tax program RFIDYYWT but in DMEE tree transaction i see only one format of file : IDWTFILE_UK_CIS36E for withholding tax
I know that theres a format of file for France : IDWTFILE_FR_DAS2
But is it possible to use it with SAP4.6c version ?
And how can I install this file format for France (steps in customizing , ossnote to apply ?????)
Thanks a lot for any answer
My

Dear Merlino,
I have some steps about withholding tax is it suitable or not find out but some scenarios is suitable kindlay check out
Hi
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate -
are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type.
When entering a line item, you can enter withholding tax data for each of these withholding tax types.
How To Configure Withholding Tax?
Steps for extended withholding tax :
1. Check withholding tax countries
2. Define Ex. Withholding tax types for invoice postings
3. Define Ex. Withholding tax codes
4. Formula for Ex. Withholding tax calculation
5. Assign Ex. Withholding tax types to Company code
6. Activate Ex. Withholding tax
8. Create a G/L a/C for Ex. Withholding tax
9. Define A/C for Ex. Withholding tax (DBWW)
10. Make changes in Vendor master (XK02)
11. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
12. Activate country version for specific fiscal year position
Path: IMG -> FA -> -> **** -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/content.htm
Hope this helps you
Prem

DMEE tree:it's possible to generate more files using one DMEE format tree?

Hello Expert,
I have a question and i need you help.
It's possible to generate two files with one DMEE format tree? If yes, how can i do it?
Thank you in advance.
Amal

In DMEE we define the structure ie the kind of feilds that needs to be populated.As far as my knowledge I think one DMEE tree can be used to create one file FORMAT
Thanks,
K.Kiran.

Unable to test DMEE tree format

Hi,
I'm almost done with my tree format in tranx DMEE to use it with the Payment Medium Workbench. I've activated my tree and it seems fine, but when I try to test iT I dont get the Data output dialog box anymore (in the begining i did). Why could this be? It should at least show the constant fields...
Thanks,
MAO

sap help sais, that delimiter information could be defined by DDIC structure... maybe anyone has an idea about such kind of DDIC structures?..
one of possible solutions:
need to write Z function module wich returs TAB as character and use it where delimiter is needed, here is source code:
c_value = cl_abap_char_utilities=>horizontal_tab.
Regards,
M.
Edited by: Mindaugas Kazlauskas on May 22, 2008 9:13 AM

DME Tree for PAYMUL format

Hi,
I am creating DME tree by modifying standard DME tree 'DK_PAYMUL_DOMESTIC' standard format is configured with One Lin, Multiple SEQs, I got a requirement of mapping DME structure with One Lin, One SEQ.
Please let me know.
Regards,
Anand

Hi,
I met the same problem with you and I have read the article above. But could you please let me know more detailed information?
I have created two examples:
First, two invoice for the same vendor but different currency. The output file can show LIN1 SEQ1....LIN2 SEQ++1 correctly.
Second, two invoice for different vendors and same currency. Only the first invoice shows in output file.
If you know what's the problem about this?
Thanks,
Lisa

DMEE tree format tab delimited - How?

All
I have to configure (trx DMEE) a 'data medium exchange' format that is going to be used for outgoing payments.
One of the requirements is that it has to be 'tab delimited'. On the tab 'Format attributes' in trx DMEE you specifiy if fields have fixed length or that fields are separated by a delimiter. Additionally you specifiy what the delimiter is ..
Does someone know how I have to specifiy that the delimiter is the 'tab'-character?
PS: sorry if it was wrong forum to post my question.
thanks ahead,
Mindaugas

sap help sais, that delimiter information could be defined by DDIC structure... maybe anyone has an idea about such kind of DDIC structures?..
one of possible solutions:
need to write Z function module wich returs TAB as character and use it where delimiter is needed, here is source code:
c_value = cl_abap_char_utilities=>horizontal_tab.
Regards,
M.
Edited by: Mindaugas Kazlauskas on May 22, 2008 9:13 AM

Error while activating DMEE tree

Hi all,
I have designed a DMEE tree; while I am trying to activate it; I am getting this message;
Message no. DMEE_ABA214
Diagnosis
When you activate a format tree, ABAP source code is generated for test purposes.
The following error occurred for ABAP keyword IF-ZOPENIN during generation for tree node OPENING_BALANCE:
The data object "IF" does not have a component cal
I opened the opening_balance node and changed its corresponding structure element to dec 13,2, while it was curr 13,2; since I was getting the same issue for other nodes. Once I changed it, the error got away for all other nodes, but still persists for the mentioned node.
Thanks,
Zahack

Hi Navin,
I have actually designed a DMEE tree for the generation of XML file;
I have made a structure Z_HEADER-OPEN_BALANCE->DEC 13,2
I have now made a node in dmee tree OPENING_BALANCE, specified length as 16; type as currency and conv func as AL.2.
Previously, I was getting for some other nodes above this node; after I changed the corresponding structure fields from CURR to DEC; the issue got resolved; so OPENING_BALANCE is one of those fields; which still shows me error.
Thanks,
Zahack

How to display a report in tree format

hai can any one send me the code to display the report in a tree format
if i take example of customer numbers as tree branches and if i click each customer number the tree should expand showing all sales orders for a customer
ragrds
afzal

use FM HR_ALV_HIERSEQ_LIST_DISPLAY
there are 2 internal table , one for header and one for detail
below is code for reference
REPORT zinsd_quot_cont.
TYPES : BEGIN OF ty_vbak,
         vbeln TYPE      vbeln_va,
         vkorg TYPE      vkorg,
         vtweg TYPE      vtweg,
         spart TYPE      spart,
         vkbur TYPE     vkbur,
         vkgrp TYPE     vkgrp,
         angdt TYPE angdt_v,
         bnddt TYPE bnddt,
         kunnr TYPE kunnr,
         kwmeng TYPE kwmeng,
         meins TYPE meins,
         kunwe TYPE kunnr,
         name1 TYPE name1_gp ,
         name2 TYPE name1_gp ,
         sel(1),
         expand(1),
         salesdocument TYPE bapivbeln-vbeln,
         message TYPE bapi_msg,
        END   OF ty_vbak.
DATA : w_vbak TYPE ty_vbak,
        t_vbak TYPE TABLE OF ty_vbak.
DATA : w_update TYPE ty_vbak,
        t_update TYPE TABLE OF ty_vbak.
TYPES : BEGIN OF ty_kna1,
         kunnr TYPE      kunnr,
         name1 TYPE name1_gp ,
        END   OF ty_kna1.
DATA : w_kna1 TYPE ty_kna1,
        t_kna1 TYPE TABLE OF ty_kna1.
TYPES : BEGIN OF ty_vbap,
        vbeln      TYPE vbeln_va,
        posnr      TYPE posnr_va,
        matnr      TYPE matnr,
        matkl      TYPE matkl,
        werks      TYPE werks_ext,
        kwmeng TYPE kwmeng,
        meins      TYPE meins,
        mvgr5 TYPE     mvgr5,
        maktx TYPE     maktx,
        END   OF ty_vbap.
DATA : w_vbap TYPE ty_vbap,
        t_vbap TYPE TABLE OF ty_vbap.
TYPES : BEGIN OF ty_makt,
         matnr TYPE     matnr,
         maktx TYPE     maktx,
        END   OF ty_makt.
DATA : w_makt TYPE ty_makt,
        t_makt TYPE TABLE OF ty_makt.
TYPES : BEGIN OF ty_sum,
        vbeln      TYPE vbeln_va,
        kwmeng TYPE kwmeng,
        END   OF ty_sum.
DATA : w_sum TYPE ty_sum,
        t_sum TYPE TABLE OF ty_sum.
TYPES : BEGIN OF ty_vbpa,
        vbeln     TYPE vbeln,
        posnr     TYPE posnr,
        parvw     TYPE parvw,
        kunnr     TYPE kunnr,
        END   OF ty_vbpa.
DATA : w_vbpa TYPE ty_vbpa,
        t_vbpa TYPE TABLE OF ty_vbpa.
TYPES : BEGIN OF ty_vbup,
        vbeln      TYPE vbeln,
        posnr TYPE posnr ,
        gbsta      TYPE gbsta ,
        END   OF ty_vbup.
DATA : w_vbup TYPE ty_vbup,
        t_vbup TYPE TABLE OF ty_vbup.
TYPE-POOLS slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
      w_fieldcatalog TYPE slis_fieldcat_alv,
      w_layout    TYPE slis_layout_alv,
      gs_keyinfo TYPE slis_keyinfo_alv.
DATA: g_tabname_header TYPE slis_tabname,
      g_tabname_item   TYPE slis_tabname.
data definition
      Batchinputdata of single transaction
DATA:   bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA : g_lines TYPE i.
*Selection Screen
TABLES : vbak,vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS s_vkorg FOR vbak-vkorg. " Sales Org
SELECT-OPTIONS s_vtweg FOR vbak-vtweg. " Dist Channel
SELECT-OPTIONS s_spart FOR vbak-spart. " Division
SELECT-OPTIONS s_vkbur FOR vbak-vkbur. " Sales Off
SELECT-OPTIONS s_vkgrp FOR vbak-vkgrp. " Sales Grp
SELECT-OPTIONS s_matkl FOR vbap-matkl. " Mat Grp
SELECT-OPTIONS s_werks FOR vbap-werks. " Plant
SELECT-OPTIONS s_period FOR vbak-angdt. " Sales Off
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM f_getdata.
PERFORM f_initdata.
END-OF-SELECTION.
PERFORM f_createalv.
PERFORM f_dispalv.
*&      Form f_getdata
      text
--> p1        text
<-- p2        text
FORM f_getdata .
*Sales Header
SELECT
    vbeln
    vkorg
    vtweg
    spart
    vkbur
    vkgrp
    angdt
    bnddt
    kunnr
INTO TABLE t_vbak
FROM vbak
WHERE
    vkorg IN s_vkorg      " Sales Org
    AND vtweg IN s_vtweg " Dist Channel
    AND spart IN s_spart " Division
    AND vkbur IN s_vkbur " Sales Off
    AND vkgrp IN s_vkgrp " Sales Grp
    AND angdt IN s_period
    AND bnddt IN s_period
    AND auart = 'ZQMO'
    AND vbtyp = 'B'.
*CUST NAME
SELECT
     kunnr
     name1
INTO TABLE t_kna1
FROM kna1
FOR ALL ENTRIES IN t_vbak
WHERE
   kunnr = t_vbak-kunnr
*Sales Item
SELECT
    vbeln
    posnr
    matnr
    matkl
    werks
    kwmeng
    meins
    mvgr5
INTO TABLE t_vbap
FROM vbap
FOR ALL ENTRIES IN t_vbak
WHERE
   vbeln = t_vbak-vbeln
   AND matkl IN s_matkl " Mat Grp
   AND werks IN s_werks " Plant
*Partners
SELECT
   vbeln
   posnr
   parvw
   kunnr
INTO TABLE t_vbpa
FROM vbpa
FOR ALL ENTRIES IN t_vbak
WHERE
    vbeln = t_vbak-vbeln.
IF t_vbpa[] IS NOT INITIAL.
    SELECT
        kunnr
        name1
     APPENDING TABLE t_kna1
     FROM kna1
     FOR ALL ENTRIES IN t_vbpa
     WHERE
      kunnr = t_vbpa-kunnr
ENDIF.
*Status - Sales Doc
SELECT
    vbeln
    posnr
    gbsta
INTO TABLE t_vbup
FROM vbup
FOR ALL ENTRIES IN t_vbap
WHERE
   vbeln = t_vbap-vbeln
   AND posnr = t_vbap-posnr
   AND gbsta NE 'C'.
SELECT
      matnr
      maktx
INTO TABLE t_makt
FROM makt
FOR ALL ENTRIES IN t_vbap
WHERE
   matnr = t_vbap-matnr
   AND spras = 'E'.
ENDFORM.                    " f_getdata
*&      Form f_initdata
      text
--> p1        text
<-- p2        text
FORM f_initdata .
SORT t_vbap BY vbeln DESCENDING.
*delete all closed stat items
LOOP AT t_vbap INTO w_vbap.
    READ TABLE t_vbup INTO w_vbup
    WITH KEY
     vbeln = w_vbap-vbeln
     posnr = w_vbap-posnr.
    IF sy-subrc <> 0.
      DELETE t_vbap.
      CONTINUE.
    ELSE.
      READ TABLE t_makt INTO w_makt
      WITH
      KEY matnr = w_vbap-matnr.
      IF sy-subrc = 0.
        w_vbap-maktx = w_makt-maktx.
        MODIFY t_vbap FROM w_vbap.
      ENDIF.
    ENDIF.
ENDLOOP.
*find the total quantity
LOOP AT t_vbap INTO w_vbap.
    w_sum-vbeln = w_vbap-vbeln.
    w_sum-kwmeng = w_vbap-kwmeng.
    COLLECT w_sum INTO t_sum.
    CLEAR w_sum.
ENDLOOP.
*populate header
LOOP AT t_vbak INTO w_vbak.
Quantity - Total
    READ TABLE t_sum INTO w_sum
    WITH KEY
     vbeln = w_vbak-vbeln.
    IF sy-subrc = 0.
      w_vbak-kwmeng = w_sum-kwmeng.
    ELSE.
      CLEAR w_vbak-kwmeng.
    ENDIF.
UoM
    READ TABLE t_vbap INTO w_vbap
    WITH KEY
     vbeln = w_vbak-vbeln.
    IF sy-subrc = 0.
      w_vbak-meins = w_vbap-meins.
    ELSE.
      CLEAR w_vbak-meins.
    ENDIF.
Partner
    READ TABLE t_vbpa INTO w_vbpa
    WITH KEY
     vbeln = w_vbak-vbeln
     parvw = 'WE'.
    IF sy-subrc = 0.
      w_vbak-kunwe = w_vbpa-kunnr.
    ELSE.
      CLEAR w_vbak-kunwe.
    ENDIF.
SHIP TO PARTY NAME
    READ TABLE t_kna1 INTO w_kna1
    WITH KEY
     kunnr = w_vbak-kunwe.
    IF sy-subrc = 0.
      w_vbak-name2 = w_kna1-name1.
    ENDIF.
CUST NAM - SOLD TO PARTY
    READ TABLE t_kna1 INTO w_kna1
    WITH KEY
     kunnr = w_vbak-kunnr.
    IF sy-subrc = 0.
      w_vbak-name1 = w_kna1-name1.
    ENDIF.
    MODIFY t_vbak FROM w_vbak.
ENDLOOP.
DELETE t_vbak WHERE kwmeng IS INITIAL.
SORT t_vbak BY vbeln DESCENDING.
SORT t_vbap BY vbeln DESCENDING posnr ASCENDING.
ENDFORM.                    " f_initdata
*&      Form f_createalv
      Create Field Cat.
--> p1        text
<-- p2        text
FORM f_createalv .
g_tabname_header = 't_vbak'.
g_tabname_item   = 't_vbap' .
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'VBELN'.
gs_keyinfo-item01   = 'VBELN'.
*VBAK
w_fieldcatalog-fieldname = 'VBELN'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKORG'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Org'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VTWEG'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Dist Channel'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SPART'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Division'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKBUR'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Office'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKGRP'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales GRP'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNNR'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sold to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME1'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-outputlen    = 35.
w_fieldcatalog-seltext_l = 'Sold to Party Code - Name'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNWE'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME2'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship Party Code - Name'.
w_fieldcatalog-outputlen    = 35.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen    = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SALESDOCUMENT'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MESSAGE'.
w_fieldcatalog-tabname   = 't_vbak'.
w_fieldcatalog-seltext_l = 'Log'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
*VBAP
w_fieldcatalog-fieldname = 'POSNR'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'POS'.
w_fieldcatalog-outputlen    = 6.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATNR'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material'.
w_fieldcatalog-outputlen    = 18.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MAKTX'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Desc'.
w_fieldcatalog-outputlen    = 40.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATKL'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Grp'.
w_fieldcatalog-outputlen    = 9.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MVGR5'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'MCNO'.
w_fieldcatalog-outputlen    = 4.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'WERKS'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'Plant'.
w_fieldcatalog-outputlen    = 91.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen    = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname   = 't_vbap'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
LAYOUT
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
w_layout-expand_fieldname = 'EXPAND'.
w_layout-box_fieldname = 'SEL'.
w_layout-box_tabname = 't_vbak'.
ENDFORM.                    " f_createalv
*&      Form f_dispalv
      Call ALV
--> p1        text
<-- p2        text
FORM f_dispalv .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
      i_callback_program             = sy-repid
      i_callback_pf_status_set       = 'SET_PF_STATUS'
      i_callback_user_command        = 'USER_COMMAND'
      is_layout                      = w_layout
      it_fieldcat                    = t_fieldcatalog
    IT_EXCLUDING                   =
    IT_SPECIAL_GROUPS              =
    IT_SORT                        =
    IT_FILTER                      =
    IS_SEL_HIDE                    =
    I_SCREEN_START_COLUMN          = 0
    I_SCREEN_START_LINE            = 0
    I_SCREEN_END_COLUMN            = 0
    I_SCREEN_END_LINE              = 0
    I_DEFAULT                      = 'X'
    I_SAVE                         = ' '
    IS_VARIANT                     =
    IT_EVENTS                      =
    IT_EVENT_EXIT                  =
       i_tabname_header               = g_tabname_header
       i_tabname_item                 = g_tabname_item
       is_keyinfo                     = gs_keyinfo
     TABLES
       t_outtab_header                = t_vbak
       t_outtab_item                  = t_vbap
    EXCEPTIONS
      program_error                  = 1
      OTHERS                         = 2
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " f_dispalv
*&      Form set_pf_status
      PF stat
     -->RT_EXTAB   text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZINSD_QUOT_CONT_ST'.
ENDFORM.                    "set_pf_status
*&      Form user_command
      Process List UCOMM
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
                           rs_selfield TYPE slis_selfield.
REFRESH t_update.
IF r_ucomm = 'EXIT'.
    LEAVE PROGRAM.
ENDIF.
IF r_ucomm = 'EXECUTE'.
    LOOP AT t_vbak INTO w_update
    WHERE
     sel = 'X'
     AND salesdocument = ' '.
      APPEND w_update TO t_update.
    ENDLOOP.
    IF t_update[] IS NOT INITIAL.
      LOOP AT t_update INTO w_update.
       PERFORM f_bapi_contract_createfromdata USING w_update.
        PERFORM f_bdc_contract_from_quotation.
        MODIFY t_update FROM w_update.
      ENDLOOP.
    ELSE.
    ENDIF.
    PERFORM f_dispalv.
ENDIF.
IF r_ucomm = '&IC1'.
    IF rs_selfield-sel_tab_field = 't_vbak-VBELN'.
      SET PARAMETER ID 'AGN' FIELD rs_selfield-value.
      CALL TRANSACTION 'VA23' AND SKIP FIRST SCREEN.
    ENDIF.
    IF rs_selfield-sel_tab_field = 't_vbak-SALESDOCUMENT' AND
       rs_selfield-value NE ' '.
      SET PARAMETER ID 'KTN' FIELD rs_selfield-value.
      CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
    ENDIF.
ENDIF.
ENDFORM.                    "user_command
*&      Form F_BAPI_CONTRACT_CREATEFROMDATA
      BAPI CALL
     -->P_W_UPDATE text
FORM f_bapi_contract_createfromdata USING p_w_update STRUCTURE w_update .
DATA : w_contract_header_in TYPE bapisdhd1 ,
         w_contract_header_inx TYPE bapisdhd1x ,
         t_contract_items_in   TYPE TABLE OF bapisditm   WITH HEADER LINE,
         t_contract_items_inx TYPE TABLE OF bapisditmx WITH HEADER LINE,
         t_contract_partners   TYPE TABLE OF bapiparnr   WITH HEADER LINE,
         t_return              TYPE TABLE OF bapiret2    WITH HEADER LINE.
CLEAR : w_contract_header_in,
          w_contract_header_inx.
REFRESH : t_contract_items_in,
            t_contract_items_inx,
            t_contract_partners,
            t_return.
w_contract_header_in-doc_type   = 'ZCNT'.
w_contract_header_in-sales_org = p_w_update-vkorg.
w_contract_header_in-distr_chan = p_w_update-vtweg.
w_contract_header_in-division   = p_w_update-spart.
w_contract_header_in-ct_valid_f = p_w_update-angdt.
w_contract_header_in-ct_valid_t = p_w_update-bnddt.
w_contract_header_inx-doc_type = 'X'.
w_contract_header_inx-sales_org = 'X'.
w_contract_header_inx-distr_chan = 'X'.
w_contract_header_inx-division = 'X'.
w_contract_header_inx-ct_valid_f = 'X'.
w_contract_header_inx-ct_valid_t = 'X'.
LOOP AT t_vbap INTO w_vbap
WHERE
    vbeln = p_w_update-vbeln.
    t_contract_items_in-material = w_vbap-matnr.
    t_contract_items_in-plant    = w_vbap-werks.
    t_contract_items_in-target_qty = w_vbap-kwmeng.
    t_contract_items_in-target_qu = w_vbap-meins.
    t_contract_items_in-ref_doc    = w_vbap-vbeln.
    t_contract_items_in-ref_doc_it = w_vbap-posnr.
    t_contract_items_in-ref_doc_ca = 'B'.
    t_contract_items_in-prc_group5 = w_vbap-mvgr5.
    t_contract_items_inx-material = 'X'.
    t_contract_items_inx-plant    = 'X'.
    t_contract_items_inx-target_qty = 'X'.
    t_contract_items_inx-target_qu = 'X'.
    t_contract_items_inx-ref_doc    = 'X'.
    t_contract_items_inx-ref_doc_it = 'X'.
    t_contract_items_inx-ref_doc_ca = 'X'.
    t_contract_items_inx-prc_group5 = 'X'.
    APPEND t_contract_items_in.
    APPEND t_contract_items_inx.
ENDLOOP.
LOOP AT t_vbpa INTO w_vbpa
   WHERE
    vbeln = p_w_update-vbeln.
     AND posnr = w_vbap-posnr.
    t_contract_partners-partn_role = w_vbpa-parvw.
    t_contract_partners-partn_numb = w_vbpa-kunnr.
    t_contract_partners-itm_number = w_vbpa-posnr.
    APPEND t_contract_partners.
ENDLOOP.
CALL FUNCTION 'BAPI_CONTRACT_CREATEFROMDATA'
    EXPORTING
SALESDOCUMENTIN               =
    contract_header_in            = w_contract_header_in
    contract_header_inx           = w_contract_header_inx
SENDER                        =
BINARY_RELATIONSHIPTYPE       = ' '
INT_NUMBER_ASSIGNMENT         = ' '
BEHAVE_WHEN_ERROR             = ' '
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
IMPORTING
    salesdocument                 = p_w_update-salesdocument
TABLES
    return                        = t_return
    contract_items_in             = t_contract_items_in
    contract_items_inx            = t_contract_items_inx
    contract_partners             = t_contract_partners
CONTRACT_CONDITIONS_IN        =
CONTRACT_CONDITIONS_INX       =
CONTRACT_CFGS_REF             =
CONTRACT_CFGS_INST            =
CONTRACT_CFGS_PART_OF         =
CONTRACT_CFGS_VALUE           =
CONTRACT_CFGS_BLOB            =
CONTRACT_CFGS_VK              =
CONTRACT_CFGS_REFINST         =
CONTRACT_DATA_IN              =
CONTRACT_DATA_INX             =
CONTRACT_TEXT                 =
CONTRACT_KEYS                 =
EXTENSIONIN                   =
PARTNERADDRESSES              =
IF p_w_update-salesdocument NE '   ' .
    p_w_update-message = 'SUCCESS'.
ELSE.
    READ TABLE t_return INDEX 1.
    p_w_update-message = t_return-message.
ENDIF.
READ TABLE t_vbak INTO w_vbak
WITH KEY
vbeln = p_w_update-vbeln.
IF sy-subrc = 0.
    MODIFY t_vbak INDEX sy-tabix FROM p_w_update .
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
ENDFORM.                    " F_BAPI_CONTRACT_CREATEFROMDATA
*&      Form f_bdc_contract_from_Quotation
      BAPI CALL
     -->P_W_UPDATE text
FORM f_bdc_contract_from_quotation.
DATA : l_date TYPE char10.
REFRESH : messtab, bdcdata.
CLEAR : messtab, bdcdata.
PERFORM bdc_dynpro      USING 'SAPMV45A' '0101'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=COPY'.
PERFORM bdc_field       USING 'VBAK-AUART'
                               'ZCNT'.
PERFORM bdc_dynpro      USING 'SAPLV45C' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=RANG'.
PERFORM bdc_dynpro      USING 'SAPLV45C' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=UEBR'.
PERFORM bdc_field       USING 'LV45C-VBELN'
                                 w_update-vbeln.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4001'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=SICH'.
IF NOT w_update-angdt IS INITIAL.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal            = w_update-angdt
      IMPORTING
        date_external            = l_date
      EXCEPTIONS
        date_internal_is_invalid = 1
        OTHERS                   = 2.
    PERFORM bdc_field       USING 'VBAK-GUEBG'
                                   l_date.
ENDIF.
IF NOT w_update-bnddt IS INITIAL.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal            = w_update-bnddt
      IMPORTING
        date_external            = l_date
      EXCEPTIONS
        date_internal_is_invalid = 1
        OTHERS                   = 2.
    PERFORM bdc_field       USING 'VBAK-GUEEN'
                                   l_date.
ENDIF.
CALL TRANSACTION 'VA41' USING bdcdata
                   MODE   'E'
                   UPDATE 'S'
                   MESSAGES INTO messtab.
break abap.
READ TABLE messtab WITH KEY msgid = 'V1'
                              msgnr = '311'.
IF sy-subrc EQ 0.
    w_update-message = 'SUCCESS'.
    w_update-salesdocument = messtab-msgv2.
ELSE.
    READ TABLE messtab WITH KEY msgtyp = 'E'.
    IF sy-subrc EQ 0.
      DATA : l_info TYPE einfo.
      CLEAR l_info.
      l_info-msgid = messtab-msgid.
      l_info-msgty = messtab-msgtyp.
      l_info-msgno = messtab-msgnr.
      l_info-msgv1 = messtab-msgv1.
      l_info-msgv2 = messtab-msgv2.
      l_info-msgv3 = messtab-msgv3.
      l_info-msgv4 = messtab-msgv4.
      CALL FUNCTION 'MESSAGE_GET_TEXT'
        EXPORTING
          ieinfo        = l_info
          ilangu        = sy-langu
        IMPORTING
          etext         = w_update-message
        EXCEPTIONS
          no_t100_found = 1
          OTHERS        = 2.
    ENDIF.
ENDIF.
READ TABLE t_vbak INTO w_vbak WITH KEY vbeln = w_update-vbeln.
IF sy-subrc = 0.
    MODIFY t_vbak INDEX sy-tabix FROM w_update transporting message
                                                             salesdocument.
ENDIF.
ENDFORM.                    " f_bdc_contract_from_Quotation
       Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "bdc_dynpro
       Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "bdc_field

Configuration setting that needs to be changed to allow flexibility copy and to paste formatted text

what is the configuration setting in Contribute that needs to be changed to allow me flexibility copy and to paste formatted text?
Example I am unable to copy and paste formatted text within contribute and the line that is represented under the heading below
Research Analysis
This is the research and analysis page. The most recent analysis for all companies listed on the

I'm not familiar with 'styled text'- which does not mean much other than it's on a very long list of things I don't know. But I do know you can cut several steps out here:
If your script works so far then you can clean it up:
tell application "FileMaker Developer"
open "MacintoshHD:Users:stuart:Desktop:Practice.fp7"
set mytext to record 2 of table 1 of database 1 as styled text
end tell
tell application "Microsoft Word"
activate
set myRange to create range active document start 0 end 0
insert text (mytext) at myRange
end tell
Also try:
set mytext to contents of record 2 of table 1 of database 1 as styled text
Reese

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

How to Formate the Font of The Tree's Parent Node ?

Hello,
Pls. , how to Formate the Font of The Tree's Parent Node ?
Other Formatting Aspects..etc.
Regards,
Abdetu..

In ur code is HTREE$ is of type varchar2 or ITEM?
Give valid parameter for item_name/item_id.
This code will be usefull to add/change the icon of the node. You can show the 16x16 image (gif, ico based on your forms_home\forms\java\oracle\forms\registry\Registry.dat file) before the tree item's node lebel.
I tried in this way to get the "Favourites" node label as *"Favourites"* (Bold).
I make *"Favourites"* as a gif icon (16 x 270) and added it as a node icon. but it shows 16 x 16 of my image.
So using this code u cannot format the font of the tree's parent node.
Balaji.

How to create Tree format in Table Rn in one Column having data?

Hi Gurus,
i got the new requirement it's very interesting pl z help me...
My Requirement is i have one Table Rn in Table Rn having 5 columns There here one column name is 'Competencies ' That Competencies column having the more rows liki
FUNC.ADMIN.Achievement Orientation
FUNC.ADMIN.Administrative Assistance and Support
FUNC.ADMIN.Administrative(ADMIN)
This is one column data my Requirement is now
FUNC
+ADMIN
+Achievement Orientation
like clients are expecting pl z tell me how to approach in this requirement and what are prerequisites are needed ...plz help me it's urgent requirement.
Regards,
Srini

Hi Gyan,
Thank's for valuable suggestions
My Requirement is This ...
"Competencies" Table Layout: (InstTableLayout)
COMPETENCIES (COLUMN NAME)
BEHV.Generic.Communication(BEHV)
BEHV.Generic.Planning, Organizing & Time Management
BEHV.Generic.Problem Solving Ability
BEHV.Generic.Productivity
BEHV.Generic.Punctuality
like number of rows are there now Tree format is row data
like each column divided each one
ex:
+ BEHV
*|*
+Generic
*|*
+Communication(BEHV)
like he expected client in tree format pl z tell me how to approach in this requirement and what are the prerequisites are required .....
Regards,
Srini
Edited by: 876628 on Dec 1, 2011 8:37 PM
Edited by: 876628 on Dec 1, 2011 8:37 PM

To create home page which consists of menu for other pages in a tree format

hi, i'm using Jdev 11g, i want to create one home page which having a tree format menu for other pages ,plz tell me

Hi,
the tree structure must be defined in a tree model that you then associate as the value to the tree component. I think the best doc to start with is from Trinidada: http://myfaces.apache.org/trinidad/devguide/tree.html
Note that ADF Faces components base on Trinidad, so the docs can be used here as well. Also, while you are on this page, have a look at the XML Menu Model, which is a nice way of creating hierarchical structures in XML so the structure is not hard coded in a Java class
Frank

What is this error java.sql.SQLException: Bad format for number ?

Dear All,
I am reading few values from database. Then I get this error "MyError:Error : java.sql.SQLException: Bad format for number 'Sarawak' in column 6. " So what is this error referring to. I have checked the database column and its value fits according the data type. Any hints please?

I have checked the database column and its value fits according the data type.Check again. Then check again. Keep checking until you find your error. You are trying to read a string containing "Sarawak" as a number. You have "getInt(6)" or other numeric type, and the 6th column in the select statement is not numeric.

Error copy PS2 Format Tree format in DMEE tree type PAYM

Similar Messages

Maybe you are looking for