Error:  could not purchase...  there is not enough memory available

Why do I keep getting the error:  "Could not purchase...  There is not enough memory available?"  When I attempt to update any apps I get this error.  I have uninstalled and reinstalled iTunes and just checked to see which version I have and it is 11.2.3.  Thank you for any assistance you can give me to resolve this issue.

Why can no one help me has no one had this happen to them? Please help

Similar Messages

  • Error msg - not enough memory available for this task - chm file

    Hi All
    I am using RoboHelp for HTML 8.0 and creating chm file.  I am using context sensitive help and the F1 key functionality.  I have in the past created some map ID's with F1 and they have worked properly with our company software application.  Now, I have a different database with our company and a larger help file and it is not working.  I am told that the database should work.  I also have lots of memory.  I am working off of my hard drive which is where the .exe is for the company application and my chm file.  I can open my .chm file.  When I go into the application and press F1 where I created the map ID;s I get the message, not enough memory available for this task and also topic not available. Quit one or more programs to increase memory.
    I have lots of memory and my file is only 598kb.  I also only have RoboHelp and the application running.  When I did a search, I found an article for a fix from 2004 from Adobe - Rb_46124 - not sure if this is the fix but the steps dont match since it is old.
    Please help me.
    Thanks
    Caryn

    Hi there
    Actually, if you were to use FlashHelp output, you might find that the problems are compounded, as now you have the Flash Player and all its idiosyncrasies in the mix.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Could not Purchase (desired tune). There is not enough memory available.

    There's nothing wrong with the 1 gig of memory in my G4 Powerbook, and I've made no system changes in the last 6 months, but today when I tried to purchase a tune from the iTunes Store, instead of working normally like it has always worked in the past, iTunes 7.6.1 gave this cryptic error message:
    "Could not purchase (the tune I selected). There is not enough memory available. There was an error in the iTunes Store. Please try again later."
    What gives? This is truly bizarre; no other apps running; fresh reboot; has the iTunes online store's server at Cupertino lost its memory? Bizarre

    Thanks Mike; I'm not interested in upgrading beyond 10.3.9, either. I'll wait and see if they fix it. It would seem logical that they would not want that defect to cause lost sales worldwide.
    If they don't fix it, I'll just stop buying music online. If a system upgrade is necessary to use the new itunes in order to buy music, the system upgrade ought to be free.

  • The app could not be added to your itunes library because an error occurred. There is not enough memory available.

    Hi guys,
    When i drag and drop an application(development app built) to my iTunes> Library > App. Then i got a error "The app 'XYZ' could not be added to your itunes library because an error occurred. There is not enough memory available." Please see my image below:
    I seached any solutions to fixing for those problems. But i did not still to  fix them.
    Apple Support Team please help me for this problem! Or anyone? Can you help me for fix this problems?
    Thanks guys so much!

    Thanks for your feedbacks "diesel vdub".
    "Is there sufficient free space on the computer?"--> My space on computer hardisk either ipad free more.
    "Has iTunes been closed and relaunched?"--> I launch this app any more time, and it still an error.
    "Has the computer been rebooted?"--> I try reboot my computer and --> open itune--> drag may app to itune--> Still occurr this message.
    Have you other way for fix this propblem?
    I running:
    My computer: Window 7 Ultimate
    My ipad: iPad 2, iOS 7.01.
    iTunes Application on Window version: 11.2.2.3
    Anyone, please help me!
    Thanks all.

  • The iPhone could not be restored. There is not enough memory available.

    Hi guys,
    you all seem the be fairly acquainted with all possible iPhone problems. I was searching this forum for an answer to my problem. iTunes won't restore my iPhone because of an error mentioned in the title of this topic - The iPhone could not be restored. There is not enough memory available. I haven't found anything on the net that I haven't tried yet.
    Am using Windows XP, iTunes 7.4.3 and the iPhone used to be on the firmware 1.0.2. I was trying to do the restore but it gave me that error message. I tryed uninstalling everything with WinASO registry cleaner, iTunes, apple device thing(or whatever), installed it 3 times, tried to force the previous firmware with Shift+restore, but nothing. I also tried to switch USB ports. I followed the instruction on how to remove iTunes exactly like it was described in another thread - no success.
    Is there any help you can maybe provide, but don't tell me to go/send it to an Apple Store, since I live in Europe, where there is no official iPhone yet.
    PLease help

    iohen wrote:
    Hi,
    is there a newer version of iTunes than 7.4.3, which I am already using ?
    I don't think so.
    And no, the iPhone has not been hacked before, I was using it like iPod, internet browser and stuff. But no calls.
    My version of iTunes say 7.4.3.1.
    I assume that by saying that your iPhone has not been hacked before means "it has never been hacked."
    Are you paying AT&T for monthly service?
    I would still try to download a fresh copy of iTunes if possible.
    If it does not work, I think that you need to take the iPhone back to the Apple Store or call AppleCare for assistance. The store, and AppleCare, has a number of software tools to potentially diagnose the problems you are encountering.

  • Itunes error message "file name here cannot be copied because an error occured. There is not enough memory available."

    Hello,
    I have an iPad 64gb. Been trying to load files on it with plenty of memory to spare. generally though i cant load more than about 35mb at a time before the message "file name here cannot be copied because an error occured. There is not enough memory available." pops up. I keep needing to close itunes, unplug my ipad, and restart it again. but the issue remeains the same.
    when i open up task manager i notice that memory usage by itunes goes from 95,000K to 1,750,000K in under 30sec which is when i get the error message. any solutions? currently running itunes on Vista.
    Thanks in advance.

    trash stuff form your computers hard drive to free up space.

  • "...There is not enough memory available."

    I'm running the most recent version of iTunes. I've got quite a bit of purchased music.
    So, I'm coming home from college. Just before I leave, I download and install the newest update. I come home, fire up iTunes, and I am told I need to authorize.
    I enter my password in. It works! (I had to deauth all comps first, but the point is I could log in)
    Having logged in, I get a new error message:
    "We could not complete your Music Store request. There is not enough memory available. There was an error in the Music Store. Please try again later."
    I've emailed the iTunes support people and they were basically useless, telling me to make sure I was updated and that I had free authorization slots.
    The problem seems similar to this old thread - http://discussions.apple.com/message.jspa?messageID=785786 - but it is locked. And the person didn't mention which cache files he deleted.
    Could anyone offer any advice?
    Thanks.

    Please help...I have the exact same problem...iTunes support is totally useless as well as applecare, they just keep resetting my password. Every time I try to authorize I add another computer to the maximum of five and then I get the too many computers authorized message. Before I reach that point I get the not enough memory message. I am desperate.

  • Can't authorize music "There is not enough memory available"

    For some reason, my computer got deauthorized last week. When I try to reauthorize the computer, iTunes claims to successfully authorize the computer (it even increments the number of authorized computers). However, it then says:
    "We could not complete your iTunes Store request. There is not enough memory available.
    There was an error in the iTunes Store. Please try again later."
    It's been doing this for about a week now. I try to reauthorize once or twice a day, and it just doesn't work. Any ideas?

    This is most likely due to a problem with your Ethernet port, which is where authorization for the iTunes Store is based for Macs. To test this, do the following:
    1) Go to the Apple Menu and select "About this Mac". On the screen that opens click the "More Info" button.
    2) The System Profiler will open. On the left column under "Contents" click on "Network".
    3) To the right, under "Active Services" click "Built-in Ethernet".
    4) In the area below, scroll all the way to the bottom, looking below all the "Proxies".
    5) If a section called "Ethernet" does not appear below "Proxies" or there is nothing underneath "Ethernet" or there is nothing next to where it says "MAC Address:" this means the Ethernet port is not functioning. It will need to be repaired, requiring a logic board replacement. Contact Apple.
    Note that this issue may be intermittent. If so, the Ethernet problem will likely only show up when you are having a problem with inability to play purchased music.

  • "Not enough memory available" error message when accessing Shopping Cart

    Can someone please help, as iTunes and Apple support can offer none at all. When I try to purchase songs or albums, or subscribe to podcasts, I get an error message that reads: "We could not complete your iTunes store request. There is not enough memory available. There was an error in the iTunes store. Please try again later."
    This has been going on for days. I've switched to 1-click shopping, uninstalled and reinstalled iTunes, turned the machine on and off, and still get nothing. There is plenty of hard drive space, and have tons of free RAM.
    Any ideas?
    Thanks!

    I just noticed all three of us have a Dell computer....did either of you recently update your BIOS? I did and just after is when I noticed the problem with iTunes that we're all having. I realize it could be just coincidence, but I can't think of anything else that changed that may have caused this problem. I was considering reverting to the old BIOS, but have done some research (mainly on forums) and don't see any mention elsewhere of this, although alot of people mentioned going back to the old BIOS for other reasons. If I can't find anything else in a day or two, I'm going to uninstall and re-install itunes. I'll report back if this helps or does nothing.
    thanks,

  • Not Enough Memory Available ERROR.

    Just upgraded itunes to the latest (10.1, I think) and now I get this error message when I try to rent or download a movie:
    "We Could Not Complete Your itunes Store Request. There is not enough memory available.
    There was an error in the itunes store. Please try again later."
    The only thing I've tried to do is rent and buy videos (to view on my new iPad!) so I don't know if this happens with music too.
    Am using Windows 7 pc, latest iTunes (updated today).
    Have tried it with the iPad connected and without it connected. Same problem.  (FWIW, it's an iPad 2 and I downloaded the software update today so it's definitely up to date. Many gigabytes free so memory can't be a problem).

    I've been having the same problem the last couple of days.  :-(
    Serves me right for waiting until a few days before a vacation to download some new music...I'd get it through Amazon but my gift cards are for iTunes. Grrrrr!!!!

  • There is not enough memory available on the Essbase Administration Server to open this outline

    When I am trying to open outline it is showing the below error-
    "There is not enough memory available on the Essbase Administration Server to open this outline"
    Please advise what can be the reason and how can we solve them?
    I checked the earlier post https://forums.oracle.com/message/4434719 and JVMOption is set with the current maximum size of the JVM e.g. -Xmx512m. Still we are receiving the error. Could you please help?

    Thanks John for the reply.
    Couple of things
    1) We use Block Storage Outline. Does it matter while compacting the outline using ESSCMDQ?
    2)  At the moment the JVM is set to -Xmx512m. Should we increase from 512 to 1024 or what is recommended.
    We are doing ESSBASE 7.1.3  to 11.x (11.1.2.2) migration (AS IT IS migration) and we are facing this problem. Quite strange that we didn't get any memory error version 7.x whereas we are getting error in 11.x  My understanding is that the current ESSBASE server has 6 GB RAM and in all ways it has higher capacity than server 7.x. But not sure why we are getting this strange error.
    Is it possible to check the JVM size in ESSBASE 7.1.3 (or where we need to check the memory size).
    Thanks in advance.
    Satheesh.

  • AEGP Plugin MediaIO Plugin:MediaIO2 error:0x4 not enough memory to complete this encoding (5027::12)

    I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
    system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.   
    Computer's Processor: Intel(R) Core(TM)2 CPU  T5500 @ 1.66GHz
    Computer's RAM: 2.00

    First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
    Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
    Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
    Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size.

  • Flash CS3 says"Error creating Flash movie...not enough memory available."have 100GB of virtual mem

    With large .fla files I often can't get Flash to output .swf files.  Usually I get the message "Error creating Flash movie.  There was not enough memory available."  Sometimes though Flash looks as if it has finished publishing (although slightly too quickly to have really done it), and then there has not been a .swf file created.
                Sometimes it's simply a matter of restarting Flash and trying again a few times until Flash decides to cooperate.  But now I have a file that just seems like it will never output.   My computer has 3 GB of RAM and 100 GB of virtual memory.  The .fla file is 152 MG and the .swf would probably be about 20-25 MB.
    If there is a workaround in CS3, that would be great.  If not, I would upgrade to CS5, if I knew that it would not have the same problem.
    I was told by at least two people at Adobe support that the problem has gone away with CS5, but I downloaded the CS5 trial version, and it will not output a .swf of my project.  In this case it doesn't give the error message, but just fails silently.

    Has this memory limitation been fixed in CS4 or CS5?  I have to say, I'm geting really fed up with having to
    spend hours coaxing Flash to output .swfs.  Is there a reason that it can't use the
    3MB of Ram available to it?

  • IPod cannot be synced. Ther is not enough memory available

    When I try to sync my ipod i get an error that says "iPod cannot be synced. There is not enough memory available." I checked and I have more than half of my iPod's memory free. What can I do to fix this? I have glanced at a few somewhat related issues and they keep mentionin the iTunes upgrade. Is this true? If so, are they going to put out another upgrade??

    I've tried all these. I was hoping for some guidance..not some form you answer every question with. I already know how to trouble shoot. I don't think it's my ipod. I think it's my itunes..

  • Why do i get the popup: The iTunes file cannot be saved. There is not enough memory available.

    Why do i get this popup on my Windows 8 PC: The iTunes file cannot be saved. There is not enough memory available. My iPhone will not play in my car since I got this popup.

    Can you play music on your phone, while not connected to anything?
    - If yes, check with support for your car. Maybe the radio cannot rexognize the iPhone anymore.
    - If no, check your pc for free space.
    I don't work with W8, maybe it denies iTunes the ability to write files.
    Think there has to be made some libary file for the files that are on your phone.
    Maybe you are able to download some files you bought in the store to your phone directly. Could try again in your car then.
    If you never bought a file, there is a free weekly song every week.
    Only have to fill out you membership details.

Maybe you are looking for