Error creating service consumer enterprise service

Hi,
I'm facing an error when creating a service consumer enterprise service using WSDL URL. I got the error message
'Exception occurred in communication framework:Error in HTTP Framework:404Not foundhttp://localhost:8000/?wsdl=wsdl0'
Does anyone have any idea of how may cause this problem ?
I've looked in existing foruns questions for a long time, and I didn't get any answer to my problem.
I'll apreciate any help.
Thanks,
Paulo Sousa

Hi,
The problem was in WSDL. It has an address 'http://localhost_8000/
They replace it by the address where the service is installed and i was able to create the service consumer.
Thanks,
Paulo Sousa

Similar Messages

  • XML Deserialization error while consuming Enterprise service in wd java..

    Hello,
    I am trying to build 2 webdynpro java webdynpro applications which consumes enterprise service for purchase order and another application for Busines partner.
    While i was able to successfully consume the PO service in webdynpro java and get the desired output for PO..i get XML Deserialization error while running appliation for Business Partner..
    These are the details/steps i followed for the Business Partner application:
    1. After creating the model using the enterprise service, i created a service controller from the model to the component controller..
    2. Out of many inputs/output attributes during mapping from model to component controller. i further mapped the context from CC to ViewC.
    3. In the wdDoInit() method, i added the follwing code:
        BPCreate model1 = new BPCreate();
        Request_BusinessPartnerERPCreateRequestConfirmation_In RequestC = new  Request_BusinessPartnerERPCreateRequestConfirmation_In(model1);
        BPERPCrteReqMsg_S CreateMessage = new BPERPCrteReqMsg_S(model1);
        BPERPCrteReq_SBP Cpartner = new BPERPCrteReq_SBP(model1);
    String Category = new String();
        String lf = new String();
        Cpartner.setInternalID(new String());
        Cpartner.setNumberRangeIntervalBusinessPartnerGroupCode(new String());
        Cpartner.setLifeCycleStatusCode(lf);
        Cpartner.setCategoryCode(Category);   
        CreateMessage.setBusinessPartner(Cpartner);
        RequestC.setBusinessPartnerERPCreateRequestMessage_Sync(CreateMessage);
        wdContext.nodeBusinessPartnerERPCreateRequestMessage_Sync().bind(CreateMessage);
    4. When i comment this code and run the application, the aplication comes up but the input fields are non-editable..
    5. If i place this code in wdDoInit() method, i get the Deserialization error..
    Any idea about why this error occurs and which areas in the application can lead to these errors?
    I checked that the service runs fine in soamanager.
    Thanks, JVR

    Hi Kishore,
    This error is majorly because while executing this Webdynpro application you are not entering all the mandatory fileds of WS.
    Please try to execute this WS from WS-Navigator, check which fileds are mandatory and then
    appropriately instantiate it in wdDoInit and pass all the fields required.
    Regards,
    Vaibhav Modi.

  • Error creating communication to SAP Service and Support.

    Hi guru,
    I hava an error while configuring in SAP solution manager 7.0 SP12  in SPRO transaction the "initial configuration part I " : the wizard configuration give me the error "Error creating communication to SAP Service and Support"
    Error creating communication to SAP Service and Support
    Message no. IMG_FASTCONF004
    Diagnosis
    Error creating communication to SAP Service and Support.
    If i create the two RFC connection manually ( SAP-OSS and SAP-OSS-LIST-O01 ) then when I returned to SPRO to make the "initial configuration part II " this tell me that there is an error in basis configuration.
    How can I solve this problem ?

    markus , this is the first step i made after the installation of Sol Manager : this step have created the RFC   SAPOSS ( and is working ).
    Ok - good.
    I am speaking about solution manager , that in basic configuration try to create the other RFC.
    yes - I´m aware of that.
    I would update to the latest service pack first (SP17 or SP18) before you start with the confiugration. The new SPs have much better wizards. SP12 is pretty old already.
    Markus

  • EP 7.0 Consuming Enterprise Services provided by PI 7.0

    Hello Community,
    A - Can we consume the Enterprise Services provided by PI 7.1 directly on EP 7.0 without using CE 7.1?
    B - Assumption - The above approach is not possible & we should use CE 7.1to create a consuming application using any UI/Composition tool eg WD, VC, Adobe etc and expose that in the Producer Portal (NWCE 7.1) which in turn would be consumed by the Consumer Portal (NW 7.0). Through federation, these composite applications are exposed to the central portal (7.0).
    Any thoughts/directions?
    Cheers - Dhanz

    Hi Siew,
    Windows Server or UNIX server ?
    If Windows Server u can give the full permissions to usr folder... User's <SID>ADM and SAPService<SID>.
    Regards,
    Suresh Kumar
    Edited by: Suresh Kalagarla on Dec 2, 2008 5:37 PM

  • Consume Enterprise Services in Java Application

    Hey guys,
    I'm very new in this field, maybe you can help me how to start....
    I want to call Enterprise Services (asynchronous, provided by SAP) from an external java application. Therefore I want to configure a integration scenario between two business systems: java application (consumer) and sap application system (service provider). Maybe you can help me to answer the following questions.
    1) What kind of adapter I have to use in communication channels?
    2) Have I to define outbound/inbound interfaces for Communication Component "sender" (business system: java application)?
    2) How does the communication between the java application and IS work? What kind of API I have to use - some kind of advanced adapter engine ... JCO, JCA ???
    Is there any demo scenario from sap? Please help me to start
    Kind regards,
    Christian

    Hello,
    problem is you are using wsimport on web-service which uses RPC/encoding. Wsimport use JAX-WS so it is not able read it.
    You should wscompile.bat instead it.
    Here is example :
    wscompile.bat -gen:client -d build/classes -s src -keep config.xml
    (-gen:client -says to generate classes for client
    -d - directory where to store classes
    -s - directory where to store sources
    -keep - to keep source file
    xml file
    Where config.xml looks like
    <?xml version="1.0" encoding="UTF-8"?>
    <configuration
    xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
    <wsdl location=
    "http://something/yourws?wsdl"
    packageName="org.your.package.client"/>
    </configuration>
    I hope it will help.
    best regards

  • Creating and consuming web service

    Hello Everyone,
    Please help me in creating a webservice which can be consumed in a button in Excel sheet i.e. I have to create a button in Excel sheet and on click of that button i have to consume a web service deployed in AS. Also I have to pass the data in Excel sheet to that web service.
    PS: This is just a business logic no other view or UI is required here.
    Thanks in advance.
    Regards
    Pranav

    Hi Pranav
    >2. I know I can download WSDL files from server using the test page. Downloaded zip file has these three wsdl files Config1_document.wsdl, Config1_TestVi_document.wsdl and main.wsdl. But which wsdl to use while consuming.
    Actually all the .wsdl files are part of single WSDL document which describes your Web service. Starting/root point here is main.wsdl which references two other .wsdl. You can access any time the root WSDL part by URL like
    "http://<host>:<port>/BcfRemoteCheck/Config1?wsdl&style=document&mode=standard".
    Hope you know where to see the WSDL URL (in Webservice Navigator or in Single Service Administration where you downloaded the ZIP).
    When you are consuming web-service you need all the parts. Usually when a Web-service is consumed the remote WSDL is used for generation of WS Client Proxy. But, the WSDL files can be also downloaded and used locally for generation of the WS Client Proxy.
    Sometimes the WSDL is not necessary at all for WS consuming on run-time. In the case it's used only on design-time just to know WS names, ports, operations, etc, for writing the code of WS Client.
    BR, Sergei

  • Unable to consume Enterprise services from Visual Composer

    Hi,
    We have implemented ECC-SE 603 add-on in our ECC 6.0 system.
    We configured to set up a connection between our J2EE engine and the ES Workplace, to consume the Enterprise services from Visual Composer.
    But, we are unable to see the Enterprise Services in the Visual Composer.
    Kindly, let us know how to resolve this issue.

    Hi,
    please refer the following link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a160392c-0e01-0010-7784-9cc564d871d2
    Regards
    Manohar

  • Unable to consume Enterprise Service from SAP Service Registry

    Hi,
    I am trying to make use of a Enterprise Service available at the SAP's Service Registry (http://sr.esworkplace.sap.com/) in a Composite Application. I am using NWDS 7.1 for this purpose.
    The steps that I follow are as follows.
    1) I try importing the Web Service by right clicking the external node under the Composite Application and give the necessary login credentials for the SAP Service Registry.
    2) I click on the "Show Advanced" link under which I make following selection:
    BrowseByApplication->ERP Foundation->Business Partner Data Management->Employee
    Now my problem is after I select the Employee node, the 'Next' button is not enabled on the Service Registry wizard.
    Can anyone give an indication of why this might be the case. You may also want to know that at this stage I have still not installed NW AS CE 7.1.
    Any help would be much appreciated.
    Thanks,
    Shailesh

    Hi David,
    Yes I was able to consume the ESOA enterprise services from SAP's ES Workplace, although I am not inside the SAP network.
    As mentioned by me in my earlier post, the problem that I was facing was faced because I used to access internet through an internal proxy server which required me to pass my NT domain credentials.
    In order to access ES workplace from NWDS would mean that NWDS will have to access the internet, but this used to fail despite my specifying the proxy server settings in the Preferences menu of NWDS.
    I was able to overcome this problem by installing an ISA Firewall client on my m/c and in the proxy settings of the NWDS specifying a direct connection to the internet. This helped me to access the SAP's ES workplace inside NWDS, once you are able to select the available ES from the SAP workplace you will be able to utilize them in your application.
    Also, once you deploy the application, the runtime, i.e. WAS will also have to be configured to access the internet, this can be done by specifying proxy settings under Global System settings options.
    Hope this helps,
    Shailesh

  • Creating MBO by Enterprise Service eats much Workspace resources.

    Hi, Experts.
    I have been developing a iPhone mobile app by SUP2.0.
    I choose SAP CRM Enterprise Service(ES) as EIS Backend and create a MBO.
    but this MBO consists of about 140 structures and ate much computer resources (no
    response) so I could not develop any more.
    ServiceConfirmationCRMByIDQueryResponse_In
    Could you give ma some advice to develop MBO by using such ES.
    Regards,

    Hi,
    This is self reply.
    I made the wrapper web service which reduce input and output parameter structures by net weaver PI and resolved the problem.
    In my opinion though SAP ES is general-purpose and complex so originally they have many parameters and structure is nested and it can not be deleted under SUP Workplace. In many case we need the wrapper web service made by Netweaver PI or Netweaver CAF or Netweaver Gateway or others.
    Thanks

  • Replace patient create bapi with enterprise service

    Hi all,
    I've compared the input data of the patient create bapi with the input message of the patient create enterprise service. There are some differences and so I don't know if it's possible to replace the bapi with the enterprise service. As example, the bapi offers input fields for contact persons (first and last name, relationship, address number) which are stored in the table NPAT.
    In contrast, the enterprise service offers the input type dependent relationship with fields DependendId and RoleCode.
    Which table does the service use to store the contact information?
    Does the create patient service fill the same tables as the bapi?
    Is it possible to replace the bapi create patient with the enterprise service?
    Best regards,
    Christian Sonek

    Hi Christian,
    Enterprise services expose more or less the business partner interface whereas BAPIs expose the patient management interfaces complying to the former data model. As my colleagued described before, next of kin is handled as a separate business partner and due to that fact, services and BAPIs behave in a different way.
    That means, in case a customer does not want to upgrade to the new patient management concept with using the central business parter he cannot create next of kin data with the PatientCreate service. In case he wants to upgrade to the new Patient concept and he agrees to store patients and next of kin as business partners, he can replace the API with the service.
    Apart from next of kin data, the service for patient create can be used to create patients even with the old patient
    Best Regards, Doris Karbach

  • How to call proxy service at enterprise service bus using flex

    Hi
    I have a proxy service located at wso2 enterprise service bus. How can i call that proxy service using flex?
    Regards
    Minal

    Hi Minal, I think you can communicate with wso2 using mx:HTTPService or mx:WebService, you just need to find out which services you'll be consuming and then create the flex app to present and interact with those services.

  • 500 Error code while consuming web service using HTTPURLConnection

    Hi,
    I am getting an HTTP response code 500 and an IOException when I run a web service client to invoke a BMC Remedy web service (document based). I am using XML over HTTP to hit the web service as follows:
    // For Remedy
    soapAddress = "http://www.test-sislhelpdesk.siemens.co.in/arsys/services/ARService?server=bomw041a&webService=WebService_Test";
    soapEnvelope = "<SOAP-ENV:Envelope xmlns:SOAP-ENV=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\"><SOAP-ENV:Header><AuthenticationInfo><userName>webservice</userName><password>*******</password></AuthenticationInfo></SOAP-ENV:Header><SOAP-ENV:Body><Q1:OpGetList xmlns:Q1=\"urn:WebService_Test\"><Q1:Qualification></Q1:Qualification></Q1:OpGetList></SOAP-ENV:Body></SOAP-ENV:Envelope>";
    soapAction = "urn:WebService_Test/OpGetList";
         URL url = new URL(soapAddress);
         HttpURLConnection connection = (HttpURLConnection) url.openConnection();
         System.out.println ("Connection got");
         connection.setDoOutput(true);
         connection.setRequestProperty("Content-Type","text/xml");
         connection.setRequestProperty ("soapAction", "\"" + soapAction + "\"");
         OutputStreamWriter outputStream = new OutputStreamWriter(connection.getOutputStream());
         System.out.println ("outputstream got");
         outputStream.write(soapEnvelope);
         outputStream.flush();
         BufferedReader reader = new BufferedReader(new InputStreamReader(connection.getInputStream()));
         String line = null;
         while ((line = reader.readLine()) != null)
              writer.write(line);
              writer.write("\n");
         System.out.println (writer);
         catch(Exception e){
              e.printStackTrace();
    I have created a .NET client proxy which seems to work well.
    I am not able to figure out as to why this code is not working. May be something wrong with the SOAP message request I am sending? But I have created this SOAP request message from the log generated for a successful hit. Any help in this regard will be highly appreciated.
    The web service is on the internet and hance is accessible to all :)
    Regards
    Vaibhav

    Tried "POST" request method, did not work.
    Actually when i hit other web services (created by me) , the code works.
    But when I hit a third party web service, it fails returning 500 error code.
    How can I extract the SOAP message returned, if any and see thinggs for myself.
    I guess there is something wrong with the request SOAP message which I am sending.

  • Get error "SoapFaultCode:1"Consume web service in ABAP proxy

    Hi All,
    I created a proxy and logical port to consume a BOBJ Data Service' webservice, when I tested the proxy I get exception:
    SoapFaultCode:1 without further more information.
    the wsdl is @ http://nspad372.dmzpal.sap.corp:8080/DataServices/servlet/webservices?ver=2.1&wsdlxml
    and the endpoint of that webservice is@ http://cnst50052835:8080/DataServices/servlet/webservices?ver=2.1
    By using SOAPUI I can successful call that webservice, but with ABAP proxy not. Can someone give me a help?
    thanks& bst regards,
    Bin

    Hi
    1.- check adding the host of the Service to your etc\hosts file unix case, or your DNS in case you have one.
    2.- Add the SOAP Action in the Logical Port Config (Obtain it from the WSDL info).
    Hope this help,
    Greetings.

  • Error While Calling DUET Enterprise Services

    Hi Folks,
    We have finished with the DUET Enterprise FP1 Configuration (Backend as BW System).
    Both SCL and Backend components reside on Same SAP System.
    We have developed 2 custom services for Testing our configurations(For Ex. Displaying a single field as output).
    We are getting following ST22 Dump(for both the services) when we try to test the services via SPROXY(Internal SAP Test) :
                                                                                    Short text                                                                               
    Type conflict with ASSIGN in program "/IWFND/CX_BASE================CP".                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "/IWFND/CX_BASE================CP" had to be                
          terminated because it has                                                           
         come across a statement that unfortunately cannot be executed.                                                                               
    Any Pointers?

    Hi,
    Please implement SAP Note: 1652706 in your Gateway system and try again.
    Regards,
    Binson

  • Exception in consuming Enterprise Service in CE 7.1 SP5

    Hi all,
    The wsdl url given below in giving exception when I am consuming this wsdl in my web dynpro application for java .
    WsDL URL :
    http://sapecc6.patni.com:8004/sap/bc/srt/wsdl/bndg_DE24D6FF00C574F1934E0015C5F884EC/wsdl11/allinone/ws_policy/document?sap-client=001
    When I consumed this wsdl  and set the destination on  CE SP5 AS, its giving following error:
    "Exception on execution of web service on destination INV_WS_METADATA_DEST for operation InventoryKPIPresentationService in interface InventoryKPIPresentationService."
    I tried executing this wsdl in   WSNavigator, both by logical destination and using URL, there its working fine, that means destination setting is correct but when itu2019s consumed in web Dynpro application its gives Exception mentioned above.
    Can you please tell me what could be the probable reason for this exception .

    I think you should follow this guide:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d70a19-45a3-2b10-bba0-807d819daf46
    or
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/301ff0bb-74ca-2910-fa99-eae392695aad
    regards
    gabriele

Maybe you are looking for

  • Did DW update 8.0.2 change the code?

    I would really appreciate a look into this problem. I I have ordered some Interakt extensions and have noticed the code changed on me (see lots below). But then I went to another machine with the 8.0.2 update with NO EXTENSIONS ENABLED or the Interak

  • Error : complete allocation structure while doing Ko88 settlement.

    Message no. KD503 Diagnosis During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in th

  • Can I use  the Lightning Digital AV Adaptor via my ipad mini to show Netflix on my TV?

    Can I use  the Lightning Digital AV Adaptor via my ipad mini to show Netflix on my TV? Thanks

  • Audio level output too low, even if set to maximum

    OS: Windows XP Professional Service Pack 3-Build Lab: 2600.xpsp_sp3_gdr.080814-1236 Audio driver:  SoundMAX Integrated Digital HD Audio - Analog Devices - Driver date: 08/02/2008, Driver version: 5.10.1.5520 The audio level output is too low, even if

  • RWB getting an errors

    Component Monitoring: RWB In XI 3.0 SP20, in Component Monitoring (RWB), All components shows blow: - IntegrationEngine                (Red) - Business process engine          (Green) - Mapping runtime               (Gray) - Adapter Engine