Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:     
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
  </System>
  <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
  </UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:     
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
  </System>
  <ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
  </ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • The hyper-v virtual machine management service encountered an unexpected error logon failure 0x80070569

    I dont understand why Microsoft people can't make things simpler
    They are LITERALLY MOTHER F%^%RS
    Bill Gate and his team need to learn hot to F^&&IN make things.

    I agree, the use of profanity is completely unnecessary, we've all been in the stressful situation before, it still doesn't call for it.
    The network you're receiving an APIPA IP on, is it the virtual switch you setup when adding the Hyper-V role?  If so you can get the warnings to go away and subsequently hide the adapter by unchecking the 'Allow host to manage this adapter' setting
    in the virtual network manager of Hyper-V manager on each node.
    Tim is also right, while disk resources are only owned by one node, you'll see the mount points for CSVs located under C:\ClusterStorage.
    More importantly, you're logon issue sounds directly related to group policy.  I had the same problem moving to Server 2012.  Yes, it's an annoying process but in the end you will have a working cluster.  I did the following steps:
    1. Install 'Group Policy Manager' on one of the nodes in your Hyper-V cluster
    2. Log on to the node you installed it on with a Domain Admin or appropriately endowed account that can edit the GPO relating to 'Logon as a service right'
    3. Edit the GPO where you specify who can logon as a server, OR if you don't have one, make a new one and link it to the OU with the Hyper-V nodes
    4. Add permission to that right for 'NT Virtual Machine\Virtual Machine Group', save and exit
    5. As an optional step I would reboot the nodes so you make sure they get it
    The problem here is that security group ONLY exists on servers that have Hyper-V installed on them.  If you add the group on a machine that has it to the GPO, the SID for the group is saved and each Hyper-V host will know what group that is.  The
    problem you're having right now is most likely related to a GPO changing 'Logon as a service right' to your needs and setup in Group Policy.  When a Hyper-V node starts up, it automatically adds the right for that group to the local security policy, however,
    group policy's auto refresh will remove it after a certain amount of time.

  • Cant create replica and Hyper V virtual machine management service slow shutting down

    Hi,
    I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
    The management console is also slow or wont load virtual machines - stuck on loading virtual machines
    The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
    Any ideas ?

    Hi Sir,
    I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
    Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
    Have you created VMs on the HOST ?
    I would suggest  you to create vhd or someother operation on hyper-v host directly  to check the result .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.
    So when you tried starting SQL server service it gave the error right  ?  or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear.  As far as I read your question it has something
    to do with permission. Close SSCM window and this time  right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

    I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
    "Windows8VM" failed to start.
    Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    "Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
    The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
    Nick :(

    Okay,  I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration.  Made sure that both Virtualization and VT for Direct I/0 are on.  Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
    the DVD point to Windows8 ISO file on hard drive.  When I clicked on start, it stayed in the Starting status mode for about 5 minutes.  Then of course it failed.  I looked at the Hyper-V-VMMS log and here is what it output:
    Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
    1) Error: The virtualization infrastructure driver (VID) is not running.
    2) Info:  Found a certificate for server authentication. Remote access to virtual machines is now possible.
    3) Info:  Successfully started the Virtual Machine migration connection manager.
    4) Info:  Virtual Machine Management service is started successfully.
    5) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    6) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    7) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    8) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    9) Info:  The Integration Services Setup Disk image was successfully updated.
    10) Error: The virtual machine bus is not running.
    11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    13) Error:  The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
    14) Error:  'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
    Nick

  • Windows 10 Technical Preview - There is NO "Hyper-v Virtual Machine Management" service???

    hi all,
    There's no such Windows Topic as "WTP Virtualization", so I post this thread here, a somewhat "VIRTULIZATION" related.
    I installed WTP (not server) x64 enterprise 9879, and added "Hyper-v Management" feature (management only, without Hyper-v core) in Control Panel. Then I found that there was no "Hyper-v
    Virtual Machine Management" in Services panel, and there was no such file "c:\windows\system32\vmms.exe". Therefore I cannot connect to Windows Server 2012 R2 Hyper-v through WTP Hyper-v Manager.
    I confirm the reason is what I state above. Firewall rules are properly configured on both Hyper-v server and WTP. I also used hvxxxx.wsf to configre anondcom to be "allow". When
    I connect WS 2012 R2 through WTP, Hyper-v manager on WTP says "Please confirm VMMS server is running".
    Is it a bug, or lack of implementation, or restriction of preview edition?
    Any suggestion is appreciated! Thanks!

    Okay,  I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration.  Made sure that both Virtualization and VT for Direct I/0 are on.  Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
    the DVD point to Windows8 ISO file on hard drive.  When I clicked on start, it stayed in the Starting status mode for about 5 minutes.  Then of course it failed.  I looked at the Hyper-V-VMMS log and here is what it output:
    Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
    1) Error: The virtualization infrastructure driver (VID) is not running.
    2) Info:  Found a certificate for server authentication. Remote access to virtual machines is now possible.
    3) Info:  Successfully started the Virtual Machine migration connection manager.
    4) Info:  Virtual Machine Management service is started successfully.
    5) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    6) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    7) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    8) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    9) Info:  The Integration Services Setup Disk image was successfully updated.
    10) Error: The virtual machine bus is not running.
    11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    13) Error:  The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
    14) Error:  'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
    Nick

  • Hyper-v virtual machine management in status stopping

    Hello,
    I had a problem with one vm showing status backing up.
    I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem.
    I have tried to shutdown the service but it now says status stopping...
    How long time does it take to shutdown the service? Is there anything I can do to hurry it up?
    ps. I have production vm running on the host that I can't take down...
    Regards
    Roger

    Hi Roger,
    I also tested in my lab to disable  that service forcibly ,then I found that it will leads the VMs to unexpected shutdown .
    Based on this ,it seems that restarting the host is necessary .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The Remote Procedure call failed error in Microsoft Direct Access configuration

    Hi,
    I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
    it fails with the remote procedure call failed error.
    Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
    Thanks,
    Arif

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.
    So when you tried starting SQL server service it gave the error right  ?  or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear.  As far as I read your question it has something
    to do with permission. Close SSCM window and this time  right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Hyper-V Virtual Machine manager

    When using the Hyper-V Virtual Machine Manager and Connecting or Viewing using RDP is there any way to configure the app to span multiple monitor, (3) would be great

    Hi Sir,
    I'm afraid you need to use "mstsc.exe" to RDP to that VM instead of "vmconnect" in hyper-v manager .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • The connection to Virtual Machine Manager Server [..] was lost.

    Hello, I'm asking for help.
    I got this error with these logs:
    The System Center Virtual Machine Manager service terminated unexpectedly. It has done 3 time(s). 
    Event id 7034
    Have anyone had such problems? 
    Looking forward for help. Thank you

    Please review the eventlog: Application and Services Logs > Microsoft > Virtual Machine Manager > Server
    This should give you an insight why Virtual Machine Manager is crashing.
    Alternately you can enable Debug logging for Virtual Machine Manager to get more information.
    Please see: http://support.microsoft.com/kb/2913445/  

  • Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

    I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall).  Though the initial replication seems to be
    happening it is very slow (the folder in question is less than 3GB).  I'm seeing these in the event viewer every few minutes:
    The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
    Additional Information:
    Error: 1726 (The remote procedure call failed.)
    and then....
    The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
    Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
    -Increased TCP Timeout to 24 hours 
    -Added the following values on both sending and receiving members and rebooted server
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Value =DisableTaskOffload
    Type = DWORD
    Data = 1
    Value =EnableTCPChimney
    Type = DWORD
    Data = 0
    Value =EnableTCPA
    Type = DWORD
    Data = 0
    Value =EnableRSS
    Type = DWORD
    Data = 0
    ---------------------------------more troubleshooting--------------------------
    -Disabled AntiVirus on both members
    -Made sure DFSR TCP ports 135 & 5722 are open
    -Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
    -Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
    Sending Member:
    [DFSRs.exe]
      TCP    10.x.x.x:53            0.0.0.0:0             
    LISTENING       1692
    [DFSRs.exe]
      TCP    10.x.x.x:54669        
    10.x.x.x:5722          TIME_WAIT       0
      TCP    10.x.x.x:54673        
    10.x.x.x:5722          ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64773        
    10.x.x.x:389           ESTABLISHED     1692
    [DFSRs.exe]
      TCP    10.x.x.x:64787        
    10.x.x.x:389           ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64795        
    10.x.x.x:389           ESTABLISHED     2104
    Receiving Member:
    [DFSRs.exe]
      TCP    10.x.x.x:56683        
    10.x.x.x:389           ESTABLISHED     7472
     [DFSRs.exe]
      TCP    10.x.x.x:57625        
    10.x.x.x:54886         ESTABLISHED     2808
    [DFSRs.exe]
      TCP    10.x.x.x:61759        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61760        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61763        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61764        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61770        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61771        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61774        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61775        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61776        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61777        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61778        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61779        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61784        
    10.x.x.x:52757         ESTABLISHED     7472
    [DFSRs.exe]
      TCP    10.x.x.x:63661        
    10.x.x.x:63781         ESTABLISHED     4880
    ------------------------------more troubleshooting--------------------------
    -Increased Staging to 32GB
    -Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
    a. The computer object of the DFS server
    b. The DFSR-LocalSettings object under the DFS server computer object
    -Ran
    ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
    -AD replication is successful on all partners
    -Nslookup is working so DNS is working
    -Updated NIC drivers on both servers
    - I ran the following to set the Primary Member:
    dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
    Then Dfsrdiag Pollad /Member:<member name>
    I'm seeing these errors in the dfsr logs:
    20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
    Error:
    + [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
    ---------------------------------------more troubleshooting-----------------------------
    I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried.  Does anyone have any other suggestions?  Maybe I need to look somewhere
    else on the server side or firewall side? 
    I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue. 
    Some other things I'm wondering:
    -Could it be the speed of the NICs?  Server A is a 2012 Server that has Hyper-V installed.  NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
    (Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
    -Could occasional ping timeout's cause the issue?  From time to time I get a timeout but it's not as often as the events I'm seeing.  I'm getting 53ms pings.  The folder
    is only 3 GB so it shouldn't take that long to replicate but it's been days.  The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am.  Throughout the rest of the time I have it set anywhere from
    4Mbps to 64 Kbps.  Server A is on a 5mb circuit and Server B is on a 10mb circuit. 

    I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
    185 events from 12:28:21 to 12:49:25
    Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
    Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
    Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
    Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
    Side note, 1726 is referenced here:
    https://support.microsoft.com/kb/976442?wa=wsignin1.0
    But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
    It also says...
    For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
    layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
    Command Prompt window:
    NETSTAT –ANOBP TCP
    This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
    Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
    NETSTAT -ANOBP TCP >> X:\info.txt
    Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
    =IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
    Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
    Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
    My server had 125 connections open.
    That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
    I'll see if I can find anything useful out, but a better solution would be most wonderful.

  • An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).

    Hi All,
    I have a two node 2003 cluster, When any one of the cluster node holding resources goes down, the resources are not failing over to the running node.
    In the running node I receive the pop-up error message
    ""An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).""
    After I click on ok on the pop-up error message the resources are coming online on the running node. If I dont click ok the pop-up error message. The Cluadmin screen is not responding and the resources are not coming online.
    In the cluster log i see the below messages realted to Error ID 1726
    00000874.00000b10::2014/03/17-23:38:58.276 WARN [EVT] EvtBroadcaster: EvPropEvents for node 2 failed. status 1726
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: SystemTime= 3/17/2014 23:38:58:276
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: GeneratingComponent= 2
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Status= 0xc002100b
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Detection Location= 641
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Flags= 0x0
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Number of Parameters= 2
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
    00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
    How to FIX this issue?
    Regards,
    Stunner.

    Hi,
    Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Base on my experience, it may cause by some of one resource abnormal
    failure, I suggest that please schedule a down time to run “Repair Active Directory object” in “Simulate Failue of this resource” status. And the operation “Repair Active Directory Object” will force to update the object’s attributes.
    More information:
    Understanding the Repair Active Directory Object Recovery Action
    http://blogs.msdn.com/b/clustering/archive/2013/12/13/9067582.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Exchange 2010 SP3 Failing to Install "The remote procedure call failed"

    I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
    Here is the exchange setup logs output:
    [11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
    [11/15/2014 09:10:52.0512] [2]  Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
               Error code 0X8000500D (20493): This property can't be found in the cache.
    [11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
    [11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
    [11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
    [11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
        buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
    [11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
    [11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
    [11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
    [11/15/2014 09:14:12.0977] [0] End of Setup
    [11/15/2014 09:14:12.0977] [0] **********************************************
    Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
    Exchange Management Console-Local
    2652
    45
    00:00:18.9698426
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    0
    Exchange Management Console-Local
    2652
    9
    00:00:37.7834262
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
    remote procedure call failed.'. --- End of inner exception stack trace ---
    0
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.

    Hi,
    Please try to remove the Water mark and Action keys under
    HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
    After that, reboot the server and rerun the set up.
    This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
    Best Regards.

  • COMException: 800706be: The remote procedure call failed

    Hi all,
    access microsoft com using java thread.some time time it works some time it gives error as given :
    com.develop.jawin.COMException: 800706be: The remote procedure call failed.
    at com.develop.jawin.marshal.GenericStub.dispatchInvoke0(Native
    Method)
    at com.develop.jawin.marshal.GenericStub.dispatchInvoke
    (GenericStub.java:83)
    at com.develop.jawin.DispatchPtr.invokeN(DispatchPtr.java:169)
    at com.develop.jawin.DispatchPtr.invokeN(DispatchPtr.java:153)
    at com.develop.jawin.DispatchPtr.invoke(DispatchPtr.java:135)
    ...

    For minor problems reboot
    For major problem reinstall
    Good luck

  • Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

    cannot open pictures in Window 8.1...getting message 'the remote procedure call failed".  What is the solution?
    I recently bought a new HP computuer and uploaded Window 8.1.  I then transfered photo files from old computer to new computer using a portable storage drive.
    When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'.  Photos are in jpeg format.
    Please let me know what I can do to view photos?

    What program you use to view these photos? Choose another app to view these photos
     for a test.
    This issue only occurred when you view photo? What is the result if we connect the
    portable storage drive to other computer (if possible)?
    Run sfc/scannow to check and fix if there are some missing or corrupted system files.
    Check the event viewer to see the detailed information of this issue.
    Regards
    Yolanda
    TechNet Community Support

Maybe you are looking for

  • Problem with threads in my swing application

    Hi, I have some problem in running my swing app. Thre problem is related to threads. What i am developing, is a gui framework where i can add different pluggable components to the framework. The framework is working fine, but when i press the close a

  • 2nd generation Ipod not recognized by macbook

    Hello, I have a mac formated 2nd gen ipod and plugged it into my macbook but it does not recognize it. On the other hand, it still charges, I cannot see the ipod nor in the finder nor in itunes. On the other hand, when I plugged it into my windows de

  • Error 150:30 for CS4

    I bought a new Mac OS 10.9.4 and get "error 150:30" after migrating Acrobat and CS4.  I went to link suggested by others, but I do not have a FlexNet Publisher folder to delete.  Any other suggestions on how to remedy?

  • OB28 line item validations

    Hi Experts , Please help me for the following scnerio My OB28 line item validation is as follows . Prerequiste BKPF-TCODE = 'FBVB' AND ( BSEG-KOART = 'S' ) AND ( BSEG-BSCHL = '40' OR BSEG-BSCHL = '50' ) check BSEG-SAKNR = '' " message Error! SAKNR is

  • Credit block should not require for Credit card paid sales order

    Dear friends, my client want that sales oder with credit card payment should not block sales order for credit management reasons. Hoe can it be configured. Regards rdc