Error - Delivery date not set. Notify your system administrator - TcodeKKS1
Hi,
While using Tcode - KKS1 we are getting the Error - "Delivery date not set. Notify your system administrator" for two Production orders. I have checked all the date fields in Production order. What could be the reason for this.
Timely help will be highly appreciated.
Thanks is advance
Narayanan
Hi,
check SAPNET note 83914 and related notes.
best regards, Christian
Similar Messages
-
An unexpected error has occurred. Please contact your system administrator
Hi All,
I have created one transaction in AR and i am trying to apply a credit transaction against this transaction in transaction work bench i am getting following error.
Error:
An unexpected error has occurred. Please contact your system administrator.
we are using R12.1.3 version.
Please help us.
Regards,
Raju.GHi Raju,
Please check for any errors in the DB and Application log file and post them here.
Also refer notes:
Transactions Workbench: Credit a Transactions Ends in Error: An Unexpected Error Has Occurred. Please Contact Your System Administrator (Doc ID 1552365.1)
Troubleshooting Credit Memos in the Transaction Workbench and AutoInvoice in Receivables (Doc ID 1110573.1)
Transactions Workbench Error: Listing of FRM Errors (Doc ID 1321612.1)
Thanks &
Best Regards , -
I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault. -
Hi all,
Does anyone have any idea what the following error relates to?
"Critical Error: An unhandled error has occurred. Please contact your system administrator.
Debug information:
System.IO.FileNotFoundException; Could not load file or assembly 'Microsoft.VisualStudio.QualityTools.UnitTestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified."
I'm stumped!Hi iAmCasio,
Have you made any changes before we meet this issue?
When do we receive this error message?
As my point of viewer, this issue is related to the Microsoft.VisualStudio.QualityTools.UnitTestFramework.
To receive better support about Visual Studio, we could seek help from studio forum.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
An error occurred in the persistence; contact your system administrator
HI,
when i am going to create user in user administration , it showing this error message An error occurred in the persistence; contact your system administrator. Post installtion steps i mean visual j2ee admin tool , sld i configured. every thing is fine expect this problem .
I got one answer i think we need sap jsf user. I found in the users area sap jsf user . but there is no roles assigned to sap jsf user.
How can i create role related to sap jsf user. please reply . reply will highly appreciated.Hi, how did this get resolved?
Regards,
Vishal -
Delivery Date not Set in Production Order
Hi,
I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
Thanks!Hi Team,
Looks like it is not a common problem probably you need to look out for any OSS notes.
Any you can check the Delivery date of the order by
1. In the order display mode CO03 hit the "I" - Status Information Icon which on the right side where order status is displayed. Now system should take you to the Display status screen, here place your cursor on the "Delivered" text and go to the menu bar : Extras-->Change documents-->For Status, now system will display when the DLV status was set.
Other option.
2.In the order display mode CO03 use the menu Goto--->Documented Goods Movment. Now system will display all the goods moved against this order select the last GR-101 movement and double click the line, now system should take you to the Material Document in this check the posting date... that should be the delivery date.
Regards,
Prasobh -
Delivery Date not Set for Production Orders
Hi,
I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
Thanks!Sorry, posted in the wrong forum.
-
An unrecoverable error has occurred. Please contact your system administrator.
Hi All,
I have the following error when I try to upload a picture in the conversation in the newsfeed.
I am unable to understand why this error come and how to solve this issue.
Thanks for all your suggestions and solutions in advance...
Prem Kumardid you check the ULS logs and share the more details.
What i am thinking, its more Browser related issue....i would try to close the all open sessions of browser and then try it, also try to clear the browser cache and try again.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Tables TCURM and T001W inconsistent; notify your systems administrator
Hi,
I'm getting the M3820 error while creating material master. I have assigned the plant to the valuation area but this still occurs.
Can anyone help?
Thank you!
FlorianHi Florian
You can take part of SAP Note 3128 in this regard.
Hope this can help.
Thanks ! -
I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Calculation Services 2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Web Access 6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local() --- End of inner exception stack trace --- at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings() at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList() at Microsoft.Office...
2.the event in event viewer is:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014/10/10 9:49:43
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ***.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: ***
Account Domain: ***
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port: 63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
<EventRecordID>37602685</EventRecordID>
<Correlation />
<Execution ProcessID="532" ThreadID="26096" />
<Channel>Security</Channel>
<Computer>***.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">***</Data>
<Data Name="TargetDomainName">***</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">***</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">***</Data>
<Data Name="IpPort">63664</Data>
</EventData>
</Event>Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support -
Document of this type is not supported in your system
Hi All,
Scenario : Through SBWP we are trying to send an attachment ( PDF/XLS/WORD ) in email.
Issue : When we try to attach any document/file, we get error - Document of this type is not supported by your system administration. We checked the TSOPE table and it didn't have PDF entry and XLS/Word were blocked. However our other system had same entries but we could attach documents and send email without any issues. Could anyone please shed light on it?
Thanks in Advance.Hello Rahul,
Hope you are doing well, have you checked TSOPFAV table ?
Also, check the following link, you may get some ideas
Sending Mails - Home Page - ABAP Development - SCN Wiki
Regards,
Siddhesh -
Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
MrudualaYou are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo -
Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
RaghavaHI All,
Please help on this issue.
Thanks
Raghava -
One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.
-
Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adilThis messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil
Maybe you are looking for
-
HP OfficeJet 8500 A909g Wireless
Do not buy this printer. It has wireless and Hardwire network connection problems. You have been warned. I installed the software on 5 computers. Everything worked fine for about a day. Then they all lost connections in the Device manager. I hav
-
Duplicate form fields across multi-page forms
Hello! I have some multi-page forms which include a few identically laid out pages; pages which take a long time to manually set up (nearly 100 fields per page, of varying sizes and positions)... I tried to duplicate the fields from one page to the o
-
I am creating HR report using pnp LDB selection screen, In this selection screen the selection block titled period is not working ...means i cant sort my data using periods titled selection screen of pnp LDB selection screen...what i should do for th
-
Hi ! I have a big problem. I�m running a RMI-Server for converting documents in RTF, PDF .... With my Apache/ Enhydra WebServer i�m calling a method from my RMI Server which looks like this : public String convertXMLtoPDF ( String xmlDocument ) As ev
-
Hi can anyone please send me the work flows PPTs
Hi , Can anyone pls send me the step by step Workflow PPTs or Pdfs in ABAP.. Thanks and regards.....