Error during AS2 message composition

Hello all,
I want to send AS2 messages using the Seeburger adapter, but get the following error
Unable to forward message to JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate TRUSTED/AS2_MHC/MHC_AS2_DEV., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiExcep
Does anyone have an idea why the certificate cannot be retreived?
Thanks.
Marco

Hi,
did you set the view_creator role of the keystore? (check SeeMasterConfigurationGuide)
After setting the view_creator role donu2019t forget to restart the J2EE engine.
Is the certificate availabe in the keystore?
regards,
Daniel

Similar Messages

  • TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message.  I have windows XP

    The program will not start because MSVCR80.dll is missing.  I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work.  I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

    First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
    If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
    Fix problems with programs that can't be installed or uninstalled

  • Timeout Error in AS2 message

    Hi,
    One of our vendors tried to send an AS2 message to us and mentionined that they had receivied a timeout error at their side.  They mentioned, that they are not getting any response while sending the message to us.
    We have checked our side and the firewall settings are properly implemented and also there is no trace of their ip addresses in our logs.
    But when we checked their logs, it did accept our server but was timed out.
    What would be the problem?

    The Vendors were pointing at wrong IP addresses.

  • Persistent Error During Download message

    I realize this issue has been posted multiple times in the past, but we've been experiencing it consistently for the past several days. I've checked the DPS status site and also scoured the Forums to see if anyone else recently posted something.
    Using the ACV, and when trying to download updates to a folio, we continually receive the error message: Error During Download, Please resume your download later." Getting this error message on iPads running iOS 5, 6 and 7. Updating content within the folio producer works fine, as does previewing a local version.
    We've tried signing out and signing back in, deleting the ACV and reinstalling, nothing works.
    We're of course under a deadline and unable to have remote staff proof a final version of our folio.
    Any suggestions?
    Thanks.

    We recently completed an AWS migration which has resulted in a number of intermittent outages and download issues. These outages haven't affected folios published to the Folio Producer Service—just the acrobat.com folios used for testing and sharing. Please bear with us while we resolve these issues.
    As noted, the workaround for downloading content is to publish a folio as Free and Private. However, this workaround doesn't work for shared folios.
    We'll provide more details when we have them. Check the status page (http://status.adobedps.com/) for additional details and updates.

  • Error receiving AS2 message from partner: B2B-50037:  B2B inbound message processing error

    B2B/SOA 11.1.1.6.0
    We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037:  B2B inbound message processing error.
    The attachment shows the relevant lines from the soa log and diagnostic log files.  Here is the error detail that shows:
    [URI: /b2b/httpreceiver] Error -:  B2B-50037:  B2B inbound message processing error[[
    Error -:  B2B-50037:  B2B inbound message processing error
            at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
            at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
            at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
            at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
            at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
    ChannelName=TransportServlet
    Reverse-Via=LIN-ISA1
    AS2-To=accobra.....
    Date=Fri, 26 Sep 2014 05:46:17 +0000
    AS2-Version=1.2
    AS2-From=K.......
    Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
    Disposition-Notification-To=http://<ip&port>/as2in
    Message-ID=<[email protected]>
    MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
    ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
    Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
    Proxy-Client-IP=172.17.25.101
    MIME-Version=1.0
    User-Agent=e-integration AS2 Server V 6.1.8
    X-Forwarded-For=172.17.25.101
    Content-Length=3602
    Host=nalinsoa05.abd.ad.acco.com
    x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
    EDIINT-Features=multiple-attachments, CEM
    Connection=Keep-Alive
    X-WebLogic-KeepAliveSecs=30
    X-WebLogic-Request-ClusterInfo=true
    The message creates a wire message, business message, and an application message.
    What doesn't happen is no MDN gets sent back to the partner.  It should be a synchronous MDN.
    We have double checked the certificates on both ends and they are OK.
    The document and Agreement get recognized OK:
    Refer To Message
    Refer To Message
    Sender Type
    AS2 Identifier
    Sender Value
    K. . .
    Receiver Type
    AS2 Identifier
    Receiver Value
    accobr. . .
    Sender
    K. . . l
    Receiver
    ACCO . . .
    Agreement Id
    K. . .l_EDI_X12_4010_856_856Def_Inbound
    Agreement
    K. . .l_EDI_X12_4010_856_856Def_Inbound
    Document Type
    856
    Document Protocol
    EDI_X12
    Document Version
    4010
    Message Type
    REQ
    Direction
    INBOUND
    State
    MSG_ERROR
    Acknowledgement Mode
    SYNC
    Response Mode
    ASYNC
    Send Time Stamp
    09/26/2014 12:46:17 AM
    Receive Time Stamp
    09/26/2014 12:46:17 AM
    The error is vague enough to provide little or no help in locating the root cause of the issue.
    Any assistance in providing information on how to get this working would be greatly appreciated.
    We do have dozens of other AS2 partners working in this instance just foe reference.  We are just having issues with this new partner setup.
    Thank you.
    Regards,
    Ken

    Ken,
    I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
    If the usecase is not SYNC, please change as ASYNC and test. It should work.

  • Keep getting "Fatal error during installation" messages on install of 7.0 SP1

    Hi,
    I keep getting the following error on installation (dialogue box) on Win2K
    of WLS 7.0.1.0:
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    While this looks like an obvious file download error I have pulled down the
    full download 3 times and the network download once and it keeps happening.
    Note that when the installer first starts it says it's doing a checksum
    check and this passes OK. The errors only occur during individual file
    installation. What's more is that it occurs at different points in the
    install process (any time between about 20% and 60% completed).
    Weird. Note that I have previously had WLS installed on my system before.
    Any ideas much appreciated.
    regards
    --malcolm

    Hi Malcolm:
    you were getting -- "[file size error for E:\ ...]"
    the installation worked on the C: drive.
    > Yes I have a number of partitions C: thru E: with D: being System part (C:
    > is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    > used 10GB and 1.5GB free.
    Since I cannot see your system and explore the used and free space, and I am not a
    Windows 2000 file management expert, I can only speculate on the causes.
    Maybe your E: drive is very fragmented and Windows cannot find enough clusters or chunks
    to let this complete. The Win95 partition is a FAT16 format; the others are NTFS.
    Perhaps there is more free space on C:, or Windows can better get what it needs when
    allocated in smaller portions.
    Where is the "platform701_win32.exe" file when you execute it?
    I am wondering if it is stored on a FAT16 drive.
    Are you using PartitionMagic? Can you give more space to E: or change cluster sizes?
    I asked about the swapfile because I am thinking about areas that grow and shrink, and
    could cause trouble at varying points as you described. So, there are TMP and TEMP ?
    Later,
    Wayne
    Malcolm Robbins wrote:
    "Wayne W. Scott" <[email protected]> wrote in message
    news:[email protected]...
    Malcolm Robbins wrote:
    Wayne,
    are you there? Any ideas?Yes. I didn't see any follow-ups for awhile, then I was very busy at theoffice.
    Your downloaded file is probably okay, but I will compare to one of mine.
    Including yours here for my own reference.
    ====
    file = platform701_win32.exe
    checksum = 3657019252 (as reported by cygwin)
    size = 283,279 KB (win2k) or 290076933 bytes (as reported by cygwin)
    ====
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    * I'll bet you are running out of space on the E: drive!
    Is E: one of your partitions? How much free space is on it?Yes I have a number of partitions C: thru E: with D: being System part (C:
    is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    used 10GB and 1.5GB free.
    Are you telling it to use the E: drive?Yes.
    Can you use C: ?I suppose I could try, if that matters ???!!!
    --- I just tried it and it all worked!!! Why is this? I don't really want
    to keep it on C:
    Where is the Windows swapfile?It's on D:
    Please search your system -- all drives -- for 'registry.xml' and show
    what is found.
    Wayne

  • Error during deploying SOA Composite

    I have created a SOA Composite in which I am trying to access an External Web Service.
    The compilation goes fine but its failing at the time of deployment to Soa Server.
    My BPEL consists of following activities-> RecieveInput-> Assign -> Invoke -> Assign -> Callback client
    In my composite I have configured WS policies and in BPEL’s invoke activity , I have added headers and endpoint URI as an expression in properties tab.
    I am getting the following error at the time of deployment :-
    1)     Through Jdeveloper and Manually through Soa Server :-
    Caused By: ORABPEL-05250
    Error deploying BPEL suitcase.
    error while attempting to deploy the BPEL component file : the exception reported is: java.lang.Exception: BPEL 1.1 compilation failed
    This error contained an exception thrown by the underlying deployment module.
    Verify the exception trace in the log (with logging level set to debug mode).
    at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:200)
    at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:876)
    at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:122)
    at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:88)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Truncated. see log file for complete stacktrace
    2)     If I deploy manually through XML files, deployment happens successfully but while testing , I get the following error
    Caused by: java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'www.w3.org', port: '80'
    Kindly provide any suggestions to rectify the issue.
    Thanks.

    When starting SOA Suite after upgrading from 11.1.1.4 to 11.1.1.6, I experienced a similar error in the soa_server?.out logs:
    <Error> <oracle.soa.bpel.engine.deployment> <BEA-000000> <
    java.lang.Exception: BPEL 1.1 compilation failed
    Anyone have a suggestion on how to resolve this error?

  • Error in AS2 reciever Communication channel

    Hi all,
    We are working on Idoc to AS2 scenario using SAP PI 7.1. we have installed the certificates provided by the AS2 partner on the PI system and used them  in the Reciever agreement.  When trying to test this interface, we are getting the following error in AS2 communication channel:
    Message-Verarbeitung fehlgeschlagen. Grund: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found.
    Can anyone please help us in resolving this?
    Regards
    Jagruthi

    Hi Jagruti,
    I am also looking for the same scenarios with Receiver AS2 adapter on PI 7.1
    I have noticed that in my AS2 receiver adaper i am not getting AS2 server details instead the conf is different from previous AS2 adapter.
    I am getting below options
    channel attribute for RTP
    Scurity attribute for RTP etc.
    can u pls help me whether anything is missing in deployment why I am not getting other optins.
    can u also share any conf doc which u hav
    chirag

  • Error at AS2 adapter level...There is no certificate with such alias

    Hi All,
    Iam sending the 856 message through AS2 adapter to partner and i got the below error at the adapter level.
    Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no certificate with such alias, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Th
    Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no certificate with such alias, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Th
    The certificate has already been uploaded and the AS2ID is defined as one of the identifiers of the party.
    Anyone has any idea what might be wrong? Did i miss anything?
    Waiting for your answers.
    Regards
    Lex

    I am having the same issue.  
    I receive the com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException
    message plus the "unable to find alias name TRUSTED\".
    It appears that after the outbound message is transformed to XML iin XI then sent to Seeburger's BIC for EDI format translation, then sent to AS2 for encryption/transmission, the AS2 adapter cannot find the key store that holds the certificates I am using.
    Am I missing some configuration that points the to the keystore I need ?
    Thanks for any and all responses.
    Andy

  • Error during scheduling while running Run order sequencing in PPR

    Hello Experts,
    An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
    Checked the capacity of the resource but seems ok.
    The below long text is displayed next to the error message.
    Error during scheduling
    Message no. /SAPAPO/OM043
    Diagnosis
    The system could not schedule an order, operation or activity.
    This could have the following causes:
    The resource does not have any free working time or capacity.
    If you have set planning direction backwards in the strategy profile:
    There is not enough working time or capacity available for scheduling between now and the scheduling date.
    If you have set planning direction forwards in the strategy profile:
    There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
    If you plan characteristics-dependently:
    You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
    The system cannot find any suitable characteristics on the resources and so it cannot schedule.
    Procedure
    Depending on which of the above reasons is the cause, change the following settings:
    Change the working times and capacities of the resources.
    Set the planning mode "infinite planning" in the strategy profile.
    Activate the planning direction forwards or backwards and reverse in the strategy profile.
    Change the characteristics that you have assigned to the resource.
    Can anyone let me know what else need to check to avoid the error.

    Dear Maddy,
    The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
    One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
    scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
    Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
    Depending on your current release there could be also some correction notes like
    1272960
    1027194
    I hope I could help you further.
    Regards,
    Tibor

  • Error during automatic PR to PO creation

    Hi,
    We are getting the following error while automatically converting PR to PO thorugh ME59N:
    "Internal system error during blocking"
    Message Class - 06  and Message Number - 002.
    Can anyone suggest that what exactly is this error and how to rectify this.
    We have checked all the Lokced entry list in the system, but none of the tables/objects related to MM are locked.
    FYI, on the selection screen of ME59N we are just specifying the plant and vendor number, as all PR for this vendor need to be converted in PO in one-go.
    Regards,
    Ankit

    Dear,
    Kindly check if Material , vendor is locked bu any user ...You can restart the server and then try...
    Or ask basis guy to check if any Lock entries are there...
    Also if still you are facing this error then make this Error message as Warning messsage and then try...
    Regards
    Utsav

  • Error during the adobe form activation

    hi all,
    when am i activate the adobe form layout (Zlayout) , the following error message occured:
    Error during activation
    Message no. EU837
    but iam not found any syntax error in layout development.
    please help in this it very urgent....
    Thanks,
    Ramana

    Hello Sir,
    You need to apply the note 1047930, After this the problem should be resolved.
    Thanks and Regards,
    Deepak...

  • "problem with shortcut/fatal error during installation" on other user accts

    I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

    I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
    If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
    Here is how I corrected it:
    1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
    2) Open a user that has administrative access -- I used the one user that has access to itunes.
    3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
    4) Go to the Security Tab
    5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
    6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
    7) Give that user full access to the Program File by putting a check mark in the Full Access box.
    8) Repeat for the remaining users.
    9) Restart computer in normal mode.
    10) Go into a user that had problems and click the itunes icon, and it should run.
    It worked for me, I hope it works for you.

  • Detect some error during PININST_BBV

    Hi All,
    I sold my HP Envy 17" via eBay, before I shipped it I did a recovery, to give the customer that new laptop experience, it worked OK however windows wouldn't activate.  Microsoft kept saying it's locked by a 3rd party.  The customer returned the laptop, I gave a refund, and now I'm trying to sort the issue out.
    HP sent out recovery disks, now, when I'm trying to perform the recovery, towards the end of the recovery I'm getting the "Detect some error during PININST_BBV" message.
    I've tried resetting BIOS to defaults.
    I've tried turning on legacy boot in BIOS.
    I'm out of options, I don't want to call HP support because it's just too painful a process.
    Has anyone got any ideas?
    Thanks.

     When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Tried Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults
    •Boot computer – immediately click / press F10 to get into the BIOS Manager.
    •Click on F9 to set the BIOS to factory default.
    •Save and Exit
    •Redo the Recovery – remember to leave the wireless light “on” during the Recovery... Didn't work for me
    Set System Date to 8/4/2012 and Redo Factory Reset and System Recovery... Didn't work for me
    Set BIOS to factory default, System Date to 8/4/2012 and performed Minimized Recovery (based on one of these posts)... Successful Minimized Recovery... Set BIOS to factory default, System Date to 8/4/2012 and performed Factory Reset... SUCCESS
    Don't know what, how, or why it worked... but it worked.
    Please try the above suggestions and report back with your findings.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Errors during validation

    I am trying to burn using iDVD 6 but keep getting an "error during validation" message. There are no warnings in the map menu, and the dvd plays perfectly in preview. No matter what I do, I keep getting this message. Help!

    Hi anpak:
    Welcome to discussions!
    Do you know the rules of chapter markers?
    *Make sure no chapter markers are within two seconds of the end of a transition.
    *Make sure no chapter markers are within two seconds of the start or end of the timeline.
    *Make sure no chapter markers are within a transition.
    Does that apply to you?
    Sue

Maybe you are looking for