Error during build application

Software - Labview 7.1 PDA and Labview DSC 7.1
OS - WIndows XP.
When I try to build application in Labview 7.1 I get following error
"Error 7 occured at Build Application. vi >> Disk Cmp setting to disk hier.vi >> Dist report Read Link Error.vi."
Can anyone had idea why this error had come.
Regards
Uttam

Hi,
Try mass compiling your VI once before building the EXE
Tools»Advanced»Mass Compile
this link will explain how to mass compile.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/aa97c01071d7cf678625695100582f40?O... 
Hope this helps
Regards
Dev

Similar Messages

  • Error during building

    hello,
    i am trying to burn a dvd from idvd using professional encoding. twice at the end of burning (4 hours later) i get a message saying there has been an error during building (multiplexing?) i burned the same idvd project using high encoding and everything seemed to work ok. i want to try the pro encoding to see if there is a difference in quality.
    another question... my project is in widescreen and looks great on my computer but in my dvd player, on my tv it's a bit stretched. why would this happen and can i fix or avoid it?
    thanks for any advice
    jean

    Hi
    Multiplex error is a very complex problem due to many things (long long list following) - on common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio = .aiff (as on audio-CDs) (else converted to this .aff 48KHz)
    Chapters !
    A.    Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly eg x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    eg external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing widescreen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio eg 4x3 or 16x9
    10. No other programs/applications running during iDVD process. eg Internet, screen & energy savers
    Yours Bengt W

  • Latest nightly sdk causes Java Heap error during build

    The latest nightly sdk 4.0.0.13210 causes out of memory error in Flash Builder during a clean build.  However the prior nightly build (4.0.0.13175) works fine.  I'm using build 262635 of Flash Builder.  What changed in the latest nightly that could cause this problem. I have over 10 modules associated with this project.  Here is details of the error that Flash Builder reports:
    An internal error occured during: "Build Project"
    An internal error occurred during: "Build Project".
    Java heap space

    Here is the stack trace:
    !ENTRY org.eclipse.core.jobs 4 2 2009-12-28 13:41:13.743
    !MESSAGE An internal error occurred during: "Build Project".
    !STACK 0
    java.lang.OutOfMemoryError: Java heap space
        at flash.swf.builder.tags.DefineBitsLosslessBuilder.build(DefineBitsLosslessBuilder.java:33)
        at flex2.compiler.media.LosslessImageTranscoder.getImage(LosslessImageTranscoder.java:127)
        at flex2.compiler.media.ImageTranscoder.doTranscode(ImageTranscoder.java:67)
        at flex2.compiler.media.AbstractTranscoder.transcode(AbstractTranscoder.java:119)
        at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:221)
        at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:103)
        at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:360)
        at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:338)
        at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:98)
        at macromedia.asc.parser.ClassDefinitionNode.evaluate(ClassDefinitionNode.java:106)
        at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:349)
        at macromedia.asc.parser.StatementListNode.evaluate(StatementListNode.java:60)
        at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:934)
        at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:320)
        at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80)
        at flex2.compiler.as3.EmbedExtension.parse2(EmbedExtension.java:70)
        at flex2.compiler.as3.As3Compiler.parse2(As3Compiler.java:438)
        at flex2.compiler.mxml.ImplementationCompiler.parse2(ImplementationCompiler.java:280)
        at flex2.compiler.mxml.MxmlCompiler.parse2(MxmlCompiler.java:196)
        at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2935)
        at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2892)
        at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:460)
        at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274)
        at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496)
        at flex2.tools.oem.Application.compile(Application.java:1184)
        at flex2.tools.oem.Application.recompile(Application.java:1129)
        at flex2.tools.oem.Application.compile(Application.java:818)
        at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ModuleBuilder.build(ModuleBuilder.java:1 34)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)

  • Error 1059 building applications

    I keep getting this error after building an application (.exe).  I had set up settings for builds for my applications a few weeks go when I tested them.  Now that I've debugged them and want to build them again I am getting this error.  I have tried deleting and recreating the builds and it will let me make a new one and run it, but if I want to make changes to the build settings I get this error.  I have tried opening up a new project and moving all my VIs and files into that project... same thing.  Anyone know what my problem is?  I posted a screen shot of the dialog below.
    Thanks for the help.
    Attachments:
    error.JPG ‏29 KB

    Hi EI-MDA
    There have been other incidences in our system where rebooting the computer solved the issue (error code 1059). It could be that there were changes made to the LabVIEW settings that had not been applied until after the reboot.
    Regards,
    Siana A.
    Application Engineering
    National Instruments

  • Error when building application with Excel included

    Hi All !
    I've read several post on problems with Report Generation Toolkit when building applications that uses Excel or Word interactivity.
    I've included both _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi in my project and added them to the dynamic vis and support files.
    When building I get the error :
    The VI is broken. Open the VI in LabVIEW and fix the errors.
    C:\Programmer\National Instruments\LabVIEW 8.2\vi.lib\addons\_office\_exclsub.llb\_Excel Dynamic VIs.vi
    When opening that VI there is no broken arrow and all the vi's included in this is not broken either.
    I've tried mass compiling and so on but so far luck.
    Regards Morten Kahr
    Regards Kahr
    Certified LabVIEW Architect
    CIM A/S

    If you do a search on this forum you will find this to be a common and vexing problem. I myself had this same exact problem about a year ago, and it took me the better part of a day to track it down. As you will find by reading the various threads on this problem, there seems to be no specific cause for this, and it remains a mystery, and the solutions are no better than chanting voodoo, and probably just as effective.
    One thing you can try is to force a recompile of your VI hierarchy. Open you top-level VI. If it's set up to run when opened, stop it. Hold down the Control key and click the run button. This will force a recompile of the application. Sometimes this works, sometimes it doesn't. Like I said, voodoo.
    Another thing to look for is to check if you are using any diagram disable structures or case structures with a constant wired, as in trying to use the case structure to comment out code.
    Are you using classes and passing by reference? There was a mention of this here.

  • Error during SP application.'TP CONNECT SID ' returns ORA-03114 error.

    Hi All,
    Last week we were applying an Add-On SAPK-510AGINAIN. It was running in
    phase IMPORT_PROPER for more than 10 hours without any update in logs.
    So I went into SM50 cancelled the work processess. From then when I continue the Add-on installation, I get an error 'TP_CANNOT_CONNECT_TO_SYSTEM' and tp return code 230. When I see
    the SLOG, it says R3trans cannot create a process. When I tried
    doing 'tp connect PI7 pf=<profile name>, I get a error 'ORA-03114- NOt
    connected to ORACLE' and also some SQL Query with ddntt table and few entries.
    I also did a DBCHECK, the ABAP Dictionary is consistent with the
    Database.Also I suspect the nametab entries should have been
    inconsistent state when I killed the work process manually..
    Regards
    Thilip Kumar

    Hi Juan,
    Oracle did not go down during SP application.. R3trans -d works fine and also the Transport tool tp check also is fine.. I have even upgraded the kernel to the latest level. STMS is configured for Single system landscape and it is also very well fine..
    Please see the output of 'tp connect PIX pf="<TP_PROFILE_>"
    TRACE-INFO: 337:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 338:                                                                                30  0.356722
    TRACE-INFO: 339:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 340:                                                                                27  0.356749
    TRACE-INFO: 341:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.356769
    TRACE-INFO: 342:  [dbntab      ,01003]  ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
    TRACE-INFO: 343:                                                                                38  0.356807
    TRACE-INFO: 344:  [dbntab      ,01003]  ***LOG BY0=>ORA-03114: not connected to ORACLE [dbntab#6 @ 10038]
    TRACE-INFO: 345:                                                                                31  0.356838
    TRACE-INFO: 346:  [dev trc     ,00000]  OCI-call failed with -1=OCI_ERROR                             299  0.357137
    TRACE-INFO: 347:  [dev trc     ,00000]     SQL error 3114: 'ORA-03114: not connected to ORACLE'        24  0.357161
    TRACE-INFO: 348:  [dbsloci.    ,00000]  *** ERROR => Error 3114 in stmt_fetch() from oci_execute_stmt(), orpc=1
    TRACE-INFO: 349:                                                                                35  0.357196
    TRACE-INFO: 350:  [dbsloci.    ,00000]  *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=0)
    TRACE-INFO: 351:                                                                                33  0.357229
    TRACE-INFO: 352:  [dev trc     ,00000]  sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT                        
    TRACE-INFO: 353:                                                                                34  0.357263
    TRACE-INFO: 354:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 355:                                                                                31  0.357294
    TRACE-INFO: 356:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 357:                                                                                30  0.357324
    TRACE-INFO: 358:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.357344
    TRACE-INFO: 359:  [dev trc     ,00000]  sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT                        
    TRACE-INFO: 360:                                                                                98  0.357442
    TRACE-INFO: 361:  [dev trc     ,00000]  prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=(nil),ocistmth_p=0x110fe9ec0
    TRACE-INFO: 362:                                                                                33  0.357475
    TRACE-INFO: 363:  [dev trc     ,00000]  IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=60,vmax=32,bound=1,iobuf_p=0x110fb1468,vda_p=0x110feb8c8
    TRACE-INFO: 364:                                                                                34  0.357509
    TRACE-INFO: 365:  [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
    TRACE-INFO: 366:                                                                                31  0.357540
    TRACE-INFO: 367:  [dev trc     ,00000]  OUT: cols=21,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=4294967295,rsize=218,vmax=32,bound=1,iobuf_p=0x110e0d4e8,vda_p=0x110fec028
    TRACE-INFO: 368:                                                                                34  0.357574
    TRACE-INFO: 369:  [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
    TRACE-INFO: 370:                                                                                31  0.357605
    TRACE-INFO: 371:  [dev trc     ,00000]  SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
    TRACE-INFO: 372:                                                                                30  0.357635
    TRACE-INFO: 373:  [dev trc     ,00000]  NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
    TRACE-INFO: 374:                                                                                31  0.357666
    TRACE-INFO: 375:  [dev trc     ,00000]  AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20  0.357686
    TRACE-INFO: 376:  [dbntab      ,01003]  ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
    TRACE-INFO: 377:                                                                                38  0.357724
    Also the are no dumps as well as system logs for the issue..
    Regards
    Thilip Kumar
    Edited by: Thilip Kumar on Dec 23, 2008 3:44 PM
    Edited by: Thilip Kumar on Dec 23, 2008 3:45 PM
    Edited by: Thilip Kumar on Dec 23, 2008 3:46 PM

  • Error during build

    Hello
    I am new in premier pro cs4 sdk. I give the following error when build the  SDK_Custom_Importpipl &  SDK_Custom_Import.cpp
    Error    3    error LNK1104: cannot open file 'C:\Program Files\Adobe\Adobe Premiere Pro CS4\Plug-ins\Common\\CustomImporterSDK.prm'    E:\snehal\Premiere Pro CS4 r1 SDK Win\Projects\SDK_Custom_Import\LINK    SDK_Custom_Import
    what is right solution for the above problem
    please help me!!!!!!

    You have to set an Environment variable called PREMSDKBUILDPATH:
    On Windows, to specify where you want the built plug-ins to go, set a user environment variable (right-click My Computer > Properties > Advanced > Environment Variables > User variables) called PREMSDKBUILDPATH to the desired path (e.g. "C:\Program Files\Adobe\Common\Plug-ins\CSXX\MediaCore"), and re-log in so that the variable will be set. In the Visual Studio Property Pages for each SDK project, this path is the base path for the Output Directory.
    Cheers,
    Jaap

  • How do I resolve Error 1017 that I'm getting during build application?

    When I'm building my application for labview RT to put on my PXI controller I get Error 1017.  How do I resolve this error?

    Hi zorro,
    We may need more information to troubleshoot this problem, as error 1017 is not a common error nor is there much documentation on it. Could you include a screenshot of the error?
    LabVIEW's error indicator explains this error as "VI has been modified on disk since it was last loaded or saved." Have you saved the entire project before building?
    Michael K.
    | Michael K | Project Manager | LabVIEW R&D | National Instruments |

  • Error 1 During Build Application

    After making a minor modification to a program LabVIEW gives me an Error
    1 when I try to build the application. The error message is "Error 1
    occurred at flatten.lsb - Librarian Path Location vi. Possible
    reasons: LabVIEW - An input parameter is invalid. or NI-488: Command
    requires GPIB Controller to be Controller in charge."
    I am using a DAQ NI-4351 and have had no problem building previous
    versions of this program. In interpretive mode, the program runs fine.
    Any ideas?

    > After making a minor modification to a program LabVIEW gives me an Error
    > 1 when I try to build the application. The error message is "Error 1
    > occurred at flatten.lsb - Librarian Path Location vi. Possible
    > reasons: LabVIEW - An input parameter is invalid. or NI-488: Command
    > requires GPIB Controller to be Controller in charge."
    >
    > I am using a DAQ NI-4351 and have had no problem building previous
    > versions of this program. In interpretive mode, the program runs fine.
    >
    This problem is described on the Knowledgebase. I suspect that you recently
    upgraded to LV5.1 and the new application builder. You no longer need to
    have copies of analysis or other vi.lib files in your LLB, and in fact,
    due to a bug in the application builder VIs, it returns an erro
    r when you
    include certain ones that contain a CIN that uses an LSB. Anyway, the
    knowledgebase has a tool that will delete the unnecessary vi.lib files,
    or you can open the application in the editor and Save with Options,
    excluding vi.lib files and then build the application from the new LLB.
    By the way, there isn't an interpretive mode in LV. VIs are always compiled.
    The compiled code just run in the editing environment instead of being made
    into an executable.
    Greg McKaskle

  • Error during running application

    Hi Folks,
    I have developed CustomerProject having a servlet looking up CustomerSession bean calling CustomerEntitybean.
    For developing this I used Netbean5.0 and SunoneApplicationserver8.2.After building this when I run the application for first time.It worked well.When I added some more business methods in the bean and started running its giving the following error.Please help me what might be the problem.How to solve it
    [b][#|2006-05-23T13:09:03.613-0500|WARNING|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5021: Application NOT loaded: [order]|#]
    [#|2006-05-23T13:09:03.803-0500|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: CustomerFacadeBean; containerId: 75261912075403265|#]
    [#|2006-05-23T13:09:03.823-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5090: Exception in creating EJB container [javax.naming.NameAlreadyBoundException [Root exception is org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0]]|#]
    [#|2006-05-23T13:09:03.823-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|appId=customerbook moduleName=CustomerBook-EJBModule_jar ejbName=CustomerFacadeBean|#]
    [#|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5012: Jndi name conflict found in [customerbook]. Jndi name [ejb/CustomerFacadeBean] for bean [CustomerFacadeBean] is already in use.|#]
    [#|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5013: Naming exception while creating EJB container:
    javax.naming.NameAlreadyBoundException [Root exception is org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0 ]
    at com.sun.jndi.cosnaming.ExceptionMapper.mapException(ExceptionMapper.java:74)
    at com.sun.jndi.cosnaming.CNCtx.callBindOrRebind(CNCtx.java:563)
    at com.sun.jndi.cosnaming.CNCtx.bind(CNCtx.java:588)
    at javax.naming.InitialContext.bind(InitialContext.java:359)
    at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManagerImpl.java:176)
    at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManagerImpl.java:146)
    at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:622)
    at com.sun.ejb.containers.StatelessSessionContainer.initializeHome(StatelessSessionContainer.java:187)
    at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:287)
    at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:481)
    at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
    at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
    at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:185)
    at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:200)
    at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
    at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
    at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
    Caused by: org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0
    at org.omg.CosNaming.NamingContextPackage.AlreadyBoundHelper.read(AlreadyBoundHelper.java:60)
    at org.omg.CosNaming._NamingContextStub.bind(_NamingContextStub.java:67)
    at com.sun.jndi.cosnaming.CNCtx.callBindOrRebind(CNCtx.java:552) ... 15 more
    |#]------------------------------------------------------------------------
    Dont know where to bind or rebind if there is any naming exception.I just created service locator..but i dont know where to rebind it
    Please help regarding this.Appreciate your time
    Thanks,
    Siris

    The global JNDI name assigned to each Remote EJB in sun-ejb-jar.xml must be unique across all the applications deployed to the application server. This message shows that more than Remote ejb uses the global JNDI name "ejb/CustomerFacadeBean" :
    #|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.sys tem.core.classloading|_ThreadID=10;|LDR5012: Jndi name conflict found in [customerbook]. Jndi name [ejb/CustomerFacadeBean] for bean [CustomerFacadeBean] is already in use.|#]
    Double-check all your sun-ejb-jar.xmls to remove the conflict , then undeploy all your apps and deploy again.
    --ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Error while building application installer and exe

    i had tried to build an installer and exe for my appication which application and exe building is successfull. but when we install it over the system it does not read  analog input and digital inputs and showing NaN in the indicator,I have treid many a ways and this works after disabling the counter reading section which is used to read the pulses from the quadrature encoder. when i again include that particular section it shows the same error. also this entire code works beautifully without any error from our source code, what might be the possible cause , please help me, 

    Hi Kodee,
    1)     Are using error handling in your code?  Are you getting any errors?
    2)     What version of LabVIEW are you using?  If you are using 8.0 or newer, then you can build a debuggable executable:
    Debugging Applications and Shared Libraries
    http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
    Regards,
    Elizabeth S.
    Applications Engineer
    National Instruments

  • Error while building application

    Hi all,
    I'm getting the following errors when I'm trying to build my application. Interestingly, it builds now and then but the application doesn't run.
    Any suggestions.
    Thanks in advance.
    Attachments:
    Build error.png ‏517 KB
    Blue arrow.png ‏135 KB

    Hi Ramrammy,
     we have a good KB for that which might fix your problem. Please have a look.
    http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
    Best regards
    Anoj Mubarak
    National Instruments

  • Getting compile time errors during gwt application compilation

    Hi,
    I am getting below compile errors while running ant script for my GWT application.
    javac:
    [javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes
    [javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\client\model\QuestionBean.java:38: type parameters of <X>X cannot be determined; no unique maximal instance exists for type variable X with upper bounds int,java.lang.Object
    [javac]           return get("questionId");
    [javac] ^
    I am using JDK 1.6 and ANT 1.7 s/w.
    below is the target which is used in the build file:
    <javac srcdir="src" includes="**" encoding="utf-8"
    destdir="war/WEB-INF/classes"
    nowarn="true"
    debug="true" debuglevel="lines,vars,source"
         includeDestClasses="false"
         source="1.5" target="1.5"      
              >
    <classpath refid="project.class.path"/>
    <compilerarg value="-Xlint:-unchecked"/>
    </javac>
    Please suggest me accordingly to overcome this generics compile time errors.
    Regards,
    Sunder.

    dannyyates wrote:
    There are/have been numerous examples of differences in spec interpretation between Eclipse (ecj) and the Sun compiler. I generally find that Eclipse is more accurate in it's interpretation than Sun! :-)
    I would suggest raising this on an appropriate Eclipse forum. The guys there are normally very good at digging into the issue and explaining why they think they are right or else admitting that they've got it wrong.I totally agree on both accounts. I myself have seen at least two compiler bugs and asked both the Sun guys and the Eclipse guys (through their respective bug tracking systems) and both have been resolved (in both cases ecj was actually right, but I wouldn't dare drawing any conclusions from that ;-)).

  • Migration issue--Error while building application in Weblogic Server10.3

    We are doing migration in from Weblogic 8.1 SP6 to Weblogic 10.3.
    When we are trying to build the applicaiton in Weblogic 10.3 environment it is giving following error.
    [java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
    [java] at
    weblogic.application.compiler.Appc.prepare(Appc.java:54)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:192)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Caused by: java.lang.ClassNotFoundException:
    weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
    [java] at java.net.URLClassLoader$1.run(Unknown Source)
    [java] at java.security.AccessController.doPrivileged(Native
    Method)
    [java] at java.net.URLClassLoader.findClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
    Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    [java] ... 5 more
    [java] Java Result: 1[java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
    [java] at
    weblogic.application.compiler.Appc.prepare(Appc.java:54)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:192)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Caused by: java.lang.ClassNotFoundException:
    weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
    [java] at java.net.URLClassLoader$1.run(Unknown Source)
    [java] at java.security.AccessController.doPrivileged(Native
    Method)
    [java] at java.net.URLClassLoader.findClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
    Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    [java] ... 5 more
    [java] Java Result: 1
    [java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
    [java] at
    weblogic.application.compiler.Appc.prepare(Appc.java:54)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:192)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Caused by: java.lang.ClassNotFoundException:
    weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
    [java] at java.net.URLClassLoader$1.run(Unknown Source)
    [java] at java.security.AccessController.doPrivileged(Native
    Method)
    [java] at java.net.URLClassLoader.findClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
    Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    [java] ... 5 more
    [java] Java Result: 1
    [java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
    [java] at
    weblogic.application.compiler.Appc.prepare(Appc.java:54)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:192)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Caused by: java.lang.ClassNotFoundException:
    weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
    [java] at java.net.URLClassLoader$1.run(Unknown Source)
    [java] at java.security.AccessController.doPrivileged(Native
    Method)
    [java] at java.net.URLClassLoader.findClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
    Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    [java] ... 5 more
    [java] Java Result: 1
    [java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBean[java] at
    weblogic.application.compiler.Appc.prepare(Appc.java:54)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:192)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Caused by: java.lang.ClassNotFoundException:
    weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
    [java] at java.net.URLClassLoader$1.run(Unknown Source)
    [java] at java.security.AccessController.doPrivileged(Native
    Method)
    [java] at java.net.URLClassLoader.findClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
    Source)
    [java] at java.lang.ClassLoader.loadClass(Unknown Source)
    [java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    [java] ... 5 more
    [java] Java Result: 1
    [java] Exception in thread "main" java.lang.NoClassDefFoundError:
    weblogic/j2ee/descriptor/wl/WeblogicApplicationBeanWe have all the required jar's in classpath.
    it would be very helpful if anyone gives any suggestion...
    Thanks in advance
    Edited by: user2928342 on Nov 23, 2009 10:02 PM

    Hi Pratik,
    Would suggest you to create a "*wlfullclient.jar*" by going through the below link and add it in your weblogic workshop and then try to deploy your application. Also it is always recommended that you should compile the old application again with the new JDK version your new weblogic sever is using.
    Tpoic:*Creating a wlfullclient.jar for JDK 1.6 client applications*
    http://download.oracle.com/docs/cd/E15051_01/wls/docs103/client/jarbuilder.html#wp1078098
    Hope this would help you.
    Regards,
    Ravish Mody

  • Encore Transcodes MPEG-2 Audio & Bitrate Error During Build

    Encore transcodes the audio but the audio is already MPEG-2. The video and audio assets have following properties:
    .mpv = 8.0 Mbit/s maximum (VBR 6-8 MB)
    .mpa = 0.2 Mbit/s fixed
    And during transcoding the error "Bitrate to High" stops the build process. Is there somewhere a limiter in action, or what is it?

    Sir Wilkes...
    Okay, I set the Bitrate to 9.4 Mbit/s, let's see if it works thru...
    mpa:
    The audio should be "MainConcept MPEG-Audio MPEG-1 Layer II-Audio" in stereo, however I have no program affirm that. The import works, I was just surprised that the audio gets transcoded, possibly to Dolby Digital. This company always delivers mpa's since they work with Avid. I have the video transcoded right there since the Avid 1x1 uncompressed quicktime codec does not work with any Adobe products, well, normally we do the Avid stuff on Mac but my boys are filming in London and Greenland so le chef has to do this one by himself.
    This DVD is PAL.

Maybe you are looking for