Error during condition record maintenance EXEM
Hello Guys,
I am trying to maintain condition records for the condition type EXEM. I am getting an error during this process.
When I get into VV11 and enter the condition type EXEM and hit enter, I get the list of key combinations. For any key combination I select and press enter, I get an error and the following log details. Please find the log details below. Any inputs to fix this error during condition maintenace would be appreciable. The config is maintained perfectly and does not indicate any error.
Thanks
Venkat
Status Note
Information 882 Coding generator started
Information 851 Report RV13B998 saved
Information 883 Text pool for report RV13B998 written in language E
Error 806 Report RV13B998 has a syntax error
Information 722 Text pool for program RV13B000 does not exist in language 0
Information 883 Text pool for report RV13B998 written in language 0
Information 883 Text pool for report RV13B998 written in language 1
Information 722 Text pool for program RV13B000 does not exist in language 2
Information 883 Text pool for report RV13B998 written in language 2
Information 883 Text pool for report RV13B998 written in language 3
Information 722 Text pool for program RV13B000 does not exist in language 4
Information 883 Text pool for report RV13B998 written in language 4
Information 722 Text pool for program RV13B000 does not exist in language 5
Information 883 Text pool for report RV13B998 written in language 5
Information 722 Text pool for program RV13B000 does not exist in language 6
Information 883 Text pool for report RV13B998 written in language 6
Information 722 Text pool for program RV13B000 does not exist in language 7
Information 883 Text pool for report RV13B998 written in language 7
Information 722 Text pool for program RV13B000 does not exist in language 8
Information 883 Text pool for report RV13B998 written in language 8
Information 722 Text pool for program RV13B000 does not exist in language 9
Information 883 Text pool for report RV13B998 written in language 9
Information 722 Text pool for program RV13B000 does not exist in language A
Information 883 Text pool for report RV13B998 written in language A
Information 722 Text pool for program RV13B000 does not exist in language B
Information 883 Text pool for report RV13B998 written in language B
Information 883 Text pool for report RV13B998 written in language C
Information 883 Text pool for report RV13B998 written in language D
Information 883 Text pool for report RV13B998 written in language E
Information 883 Text pool for report RV13B998 written in language F
Information 722 Text pool for program RV13B000 does not exist in language G
Information 883 Text pool for report RV13B998 written in language G
Information 883 Text pool for report RV13B998 written in language H
Information 722 Text pool for program RV13B000 does not exist in language I
Information 883 Text pool for report RV13B998 written in language I
Information 883 Text pool for report RV13B998 written in language J
Information 722 Text pool for program RV13B000 does not exist in language K
Information 883 Text pool for report RV13B998 written in language K
Information 883 Text pool for report RV13B998 written in language L
Information 883 Text pool for report RV13B998 written in language M
Information 883 Text pool for report RV13B998 written in language N
Information 883 Text pool for report RV13B998 written in language O
Information 883 Text pool for report RV13B998 written in language P
Information 883 Text pool for report RV13B998 written in language Q
Information 883 Text pool for report RV13B998 written in language R
Information 883 Text pool for report RV13B998 written in language S
Information 883 Text pool for report RV13B998 written in language T
Information 722 Text pool for program RV13B000 does not exist in language U
Information 883 Text pool for report RV13B998 written in language U
Information 883 Text pool for report RV13B998 written in language V
Information 722 Text pool for program RV13B000 does not exist in language W
Information 883 Text pool for report RV13B998 written in language W
Information 722 Text pool for program RV13B000 does not exist in language X
Information 883 Text pool for report RV13B998 written in language X
Information 722 Text pool for program RV13B000 does not exist in language Y
Information 883 Text pool for report RV13B998 written in language Y
Information 722 Text pool for program RV13B000 does not exist in language a
Information 883 Text pool for report RV13B998 written in language a
Information 722 Text pool for program RV13B000 does not exist in language b
Information 883 Text pool for report RV13B998 written in language b
Information 722 Text pool for program RV13B000 does not exist in language c
Information 883 Text pool for report RV13B998 written in language c
Information 722 Text pool for program RV13B000 does not exist in language d
Information 883 Text pool for report RV13B998 written in language d
Information 722 Text pool for program RV13B000 does not exist in language i
Information 883 Text pool for report RV13B998 written in language i
Status Note
Information 884 Screen generator started
Information 860 Screen SAPMV13B 1998 saved
Information 858 Screen SAPMV13B 1998 generated
Status Note
Information 890 Text field for field INSMK not found
Information 860 Screen SAPMV13B 2998 saved
Information 858 Screen SAPMV13B 2998 generated
What part of the code would you like?
It says there is an error in Report RV13B998. This is part of standard.
Thanks
Venkat.
Similar Messages
-
QM-Calibration Procedure -Error during Result Recording
Dear Sir,
During mapping of Calibration Process in SAP,I am getting error ( status check error ) for Result recording of Inspection lot (QM-Calibration).I have follow all the required steps,I am not getting reason of error,Please Advice.
ThanksDear
Maintain in sampling procedure radio button palnt maintainance. then check if ur using inspection plan with inspection point.
else make sampling management radio button on..
regards
SANIL -
Error during result recording in QE71
Hi Gurus,
I am using inspection point (copy of 150) in my inpection plan. When i am trying to save my result recording in QE71 system giving below error message.
Insp. Lot Oper Charac. no Sample Message text MsgType Message ID Msg.No.
80000000196 0010 10 2 You must enter a text for the characteristic result E QE 462 C60
Though i have maintained the resuts.
Please help to resolve this issue.
Regards
SandipYou need check the inspection characteristic's control indicator.
Transaction QP03 (display inspection plan)
If you set 'Docu. required' in control indicator of inspection characteristic, additional text must always be entered to document the inspection results during results recording for this characteristic.
Try to change the indicator to 'No documentation' then there will be no more that message in transaction QE71.
Regards
Luke -
Dates in the condition record maintenance for the condition type?
Hi,
Condition type has the following dates when maintaining the condition record,
Valid from date:
Valid on :
Please ellaborate on the above dates?
ThanksDear Rajiv
Valid from date:- The date from which the said condition type is applicable. For example, in VK11, if you changed (let us assume PR00 changed to Rs.250 from 200) a condition with a date as 01-06-08 in the above field, only from 1st of June'08, whatever sale orders you generated, revised value of Rs.250 will flow in the respective sale orders. Whatever created b4 1st June'08 will be having Rs.200.
Valid on :- As in the above case, if you input a date as 30-05-08 for the above condition type, system will populate Rs.200/- and if you input 01-06-08, it will propose Rs.250/-.
Hope this explanation is suffice for you to understand the difference between the two fields.
thanks
G. Lakshmipathi -
Condition Record maintenance Doubt
Dear SD collegures,
when i maintain a basic price condition record for example Pr00 i maintained material 'A' is costing 100. then Today i changed the value to 98 and 100 rupees validity is changed to yesterday. then i give new price 98 is valid from today. after saving when i go back and see the condition record it says no record found.
Kindly throw some light
regards,
SudhirDear Sudhir,
Try this,
You first change the validity date of 100 rupees with yesterday date
Now you go through VK11 transaction maintain new condition record for 98 rupees with validity from Taday's date.
I hope this will help you,
Regards,
Murali. -
Error Message : Condition record
Hi,
I would like to print a message ZZ00 in a PO.
The condition record is saved but can't be displayed when i create the PO.
I have to do it manually.
In output -> GOTO -> Determination analysis
The system found the condition record but it's can't be displayed. This message appear :
"The condition record for use B can not be displayed"Hi.
....in the IMG you must enter:
->Message Types
---> Define Message Types for Purchase Order
Goto:
Fine-Tuned Control: Purchase Order
Add your output-type here..... -
Frequent run-time errors during audio recording
While recording audio voice-over for a slide, I'll often do
several "takes" before finding the best one. All too frequently,
when I click OK, I encounter a run-time error that terminates the
Captivate 2 software. I've done the default installation on two
machines and encountered the same problem on both. Are other users
running into this problem as well? Any fixes / workarounds to
suggest? Is this problem fixed with Captivate 3?
Below is the message that appears.
Title Bar: Microsoft Visual C++ Runtime Library
Messaqe Text: Program: C:\Program Files\Adobe\Adobe Captivate
2\AdobeCaptivate.exe
This application has requested the Runtime to terminate it in
an unusual way. Please contact the application's support team for
more information.
Any input would be greatly appreciated. Thanks!Hi folks,
The first thing I would do is to remove the .dat file that
can be found via the following path:
C:\Document and Settings\Username\Application
Data\Adobe\Adobe Captivate\
Rename the captivate_v20.dat to something like
Old_captivate_v20.dat and then start up Adobe Captivate.
If this doesn't address the problem then report this as a bug
using the
Adobe
Captivate Feature Request/Bug Report Form
Let us know how you get on.
Best - Mark -
Frm-92101 error during next record
hi ........
when i execute query and move to second record then it gives frm-92101 error.
please give the solution ..
in log file following information
07/02/04 16:51:48 forms90web: Forms session <17> aborted: unable to communicate with runtime process.
07/02/04 16:51:48 forms90web: Forms session <17> exception stack trace:
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at java.io.DataInputStream.readLine(DataInputStream.java:562)
at oracle.forms.net.HTTPHeaderTool.parseResponseHeader(Unknown Source)
at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
plz replyTry recompiling all the PL/SQL in the form by clicking on
Program, Compile PL/SQL, All. -
ECATT RAISE EXCEPTION error during multiple record processing
I wish to load records to a table via an in-house-written ABAP program. This program consists of a main screen and multiple sub-screens. I am submitting an Excel spreadsheet as input. The eCATT configuration successfully runs the TCD script for alternate records. For every other record that is processed, a RAISE EXCEPTION error occurs. If an even number of records is submitted, the same result occurs upon multiple re-submissions. If an odd number of records is resubmitted, the RAISE EXCEPTION error occurs on opposite records from the previous submission. For example,
Submission #1: Re-submit #1:
1. success 1. success
2. RAISE EXCEPTION 2. RAISE EXCEPTION
3. success 3. success
4. RAISE EXCEPTION 4. RAISE EXCEPTION
Submission #2: Re-submit #2:
1. success 1. RAISE EXCEPTION
2. RAISE EXCEPTION 2. success
3. success 3. RAISE EXCEPTION
Any suggestions to resolve this would be much appreciated.Hi ,
i think the recording of your script is on TCD.
just double click the recording you have made and find a field name called "DATA_INCOMPLETE" parameterised that "X".Now execute and see,it should work fine..
Regards,
Venky -
Error during ECATT recording ME31L
Hi,
I encountered some problems during recording with ECATT.
I tried to record transaction ME31L with SAPGUI command. When I run transaction ME31L without recording, at the end I receive the message with generated document number:
"Direct Shipment RM created under the number 5500000186"
During recording I don't see this message, but I receive the message:
Mail request 000000000590 created
and I can't see the document number. By the way, the document is correctly created.
So I can't set the document number as the script output.
Could someone help me?
Thanks a lot.
Simone>
Simone Barbieri wrote:
> Hi,
>
> I encountered some problems during recording with ECATT.
> I tried to record transaction ME31L with SAPGUI command. When I run transaction ME31L without recording, at the end I receive the message with generated document number:
>
> "Direct Shipment RM created under the number 5500000186"
>
> During recording I don't see this message, but I receive the message:
>
> Mail request 000000000590 created
>
> and I can't see the document number. By the way, the document is correctly created.
> So I can't set the document number as the script output.
>
> Could someone help me?
>
> Thanks a lot.
> Simone
Hi Simone,
You have to add Message.....Endmessage command from the Pattern.
Also,make sure that the auto-generated commands are placed between Message...EndMessage.
Eg: Message(MSG_1).
SAPGUI automated Generated commands.
EndMessage(MSG_1).
After recording,note the Message ID,Message Number and the Message Type and mention the same in Message(MSG_1).
Also,Parameterize the output field against the correct Message Variables.
Hope this info helps.
Regards,
SSN. -
Need help with incorrect syntax error during a record update
I'm getting the error below but I cannot figure out what I'm doing wrong.
Error Executing Database Query.
[Macromedia][SQLServer JDBC Driver][SQLServer]Incorrect syntax near the keyword 'WHERE'.
The error occurred in C:\ColdFusion9\wwwroot\Intranet\DM\Admin\Maintenance-BulbBaseType.cfm: line 23
21 : UPDATE [Bulb Base Type Table]
22 : SET [BulbBaseTypeDesc] = '#TxtBulbBaseTypeDesc#',
23 : WHERE ([BulbBaseTypeID] = #TxtID#)
24 : </cfquery>
25 : <cfset TxtID = 0>
I have set my cfparam as:
<cfparam name="Submit" default="">
<cfparam name="TxtID" default=0>
<cfparam name="TxtBulbBaseTypeDesc" default="">A good rule of thumb when encountering this sort of error message is to examine the preceding line of code.
If you do that with your query, you should spot the trailing comma at the end of the line.
Also: read up on CFQUERYPARAM. Don't hard-code dynamic values in your SQL string.
Adam -
Error during matching record - Urgent
Hi All:
with below sample data
============================
GKEY EQ_NBR PERFORMED TSERV_ID
=================================================================
43593981 ECMU1715182 23-Jun-2008 2:04:56 PM EXM
43593983 ECMU1715182 23-Jun-2008 2:13:53 PM YARD SHIFT
43593984 ECMU1715182 23-Jun-2008 3:26:33 PM YARD SHIFT
43593985 FCIU8043523 23-Jun-2008 3:47:15 PM YARD SHIFT
43593987 FCIU8043523 23-Jun-2008 3:50:15 PM EXM
43593989 FCIU8043523 23-Jun-2008 3:52:26 PM YARD SHIFT
I want to display those records having YARD SHIFT after EXM
If there are more than one YARD SHIFT records THEN the very first YARD SHIFT after EXM
should be display where se.performed BETWEEN trunc(sysdate-120/1440,'mi')
AND trunc(sysdate,'mi')
I wrote following query:
select
gkey, se.eq_nbr, se.performed, se.tserv_id
from service_events se
where se.performed BETWEEN trunc(sysdate-120/1440,'mi')
AND trunc(sysdate,'mi')
and se.tserv_id in ('YARD SHIFT')
and exists (select 1 from service_events se1
where se1.tserv_id in ('EXM')
and se1.equse_gkey = se.equse_gkey
and se.performed > se1.performed
and se.eq_nbr = 'ECMU1715182'
which display following result
GKEY EQ_NBR PERFORMED TSERV_ID
=================================================================
43593983 ECMU1715182 23-Jun-2008 2:13:53 PM YARD SHIFT
43593984 ECMU1715182 23-Jun-2008 3:26:33 PM YARD SHIFT
This is wrong, I need following record to be display
43593983 ECMU1715182 23-Jun-2008 2:13:53 PM YARD SHIFTNo record should be display if performed does not exist between trunc(sysdate-120/1440,'mi')
AND trunc(sysdate,'mi')
Thanks
HassanBoneist will be well aware that you have more than 5
records. The "SELECT ... FROM DUAL UNION ...."
'section' of her example is used to create a
representative set of sample data with which she can
work (i.e. the same as the sample data that you
supplied). It is similar to creating a table
and inserting rows, but it's quicker, easier, cleaner
and cooler.Looks like I'll need to add a "-- start of test data setup" at the beginning to make it even clearer!
P.S. One little thing, PLEASE try to avoud use of the
word "urgent" in your posts, it is generally regarded
as being a bit rude :) (you may have noticed
Boneist's alteration of the title.
CheersI was going for subtly sarcastic... did it work?! *{;-) -
hi guys,
i want to delete a condition record using VK12, am selecting the row and pressing the icon 'Delete Row' but its not working out, and the row still remains the same(the condition record not getting deleted). More over, the 'Deletion ID' is selected in the condition record.
how do i delete the condition record in this case. this is very urgent. plz send the replies ASAP.
thanks in advance.
kumar.Dear Kumar,
There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an
alternative.
<b>Deletion Flag</b>
You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
<b>Physical Deletion</b>
If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
Recommendation:
SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
Physical deletion can be included using the change documents for example deletions in a specific period (Report RV16ACHD).
Reward points if this is helpful.
Regards,
Naveen. -
Delete condition record??
how to delete condition record from VK11. can i have t code plz.
Hi,
Just to add,
There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an alternative.
<b>Deletion Flag</b>
You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
<b>Physical Deletion</b>
If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
<b>Recommendation:</b>
SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
Physical deletion can be included using the change documents for example deletions in a specific period (Report RV16ACHD).
Hope this helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore -
Condition record exists, but has not been set
Hi
in the pricing analysis this is the explanation i got.
the reasons could be an Condition record overflow or the condition record wpuld have been created after the documnet is created.
But i found the record has been mainatined earlier to the creation of document.
this was for MWST condition type in IS Oil. where the tax rate manatined for this condition record is zero%
Since this is a mandatory condition, the document could not be completed.
Your help in this regard is highly appreciated.
thanks
C.SivakumarHi,
Check the pricing procedure for the condition type MWST. Whether this condition is taken from any prevoius steps
(check the from and to for the condition type MWST).
If this condition is with reference to somw other condition, then check whether that condition is maintianed or not?
Check the condition record maintenance in VK13, did you maintian the right access?
Prase
Maybe you are looking for
-
Error in FTXP -Calculation procedure not maintained correctly for level 000
Hi Guru I am creating a new tax code A7 through trx. FTXP. It is a copy of another code A1 and only percentage needs to change for eg. from 60% to 25%. After changing while saving i get error - 'Calculation procedure not maintained correctly for leve
-
FF_5 Uploading, not uploading open items
hi when uploading a bank statement for the month of April in ff_5, process all the steps and once i execute the session in SM35, the open items which is having assignment 000000 is not getting picked and all the other open items are gettin
-
Firefox cannot open administrator of websites
firefox cannot open administrator of websites ''Locking as duplicate, continue here - https://support.mozilla.org/en-US/questions/924020 - TonyE
-
(OSStatus error -50.) video files not playing please help
I own a Nikon D300s, I have been downloading video from it for quite a while without any issues, but today when I tried to open some of my video clips I received the error code below... *The movie could not be opened*. Operation could not be complete
-
if a str = "System.out.println()" how can i execute the str thanks