Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,

Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks

Similar Messages

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

Vendor number entered in customer master data-error

When entered the vendor number in the customer master data in contrao data tab in general data and save it ,system throws an error enter address number.
Double click on the error it gives below message :
Please enter an address number
Message no. AM016
Please advice.

Even if the address for both are same still it gives error,and also if the address is different the error is thrown.Both the ways it throws the error.I get this error only when i enter vendor no in customer or customer no in vendor if not it saves with out any error.
Edited by: mysap query on Dec 22, 2008 12:02 PM

How to create customer master data for walking customer in retail

hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanks

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

XD01 assertion failed error while updating customer master data

Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto

>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards,

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Error in Customer master data creation

when I am creating customer master data, error is in sales area data :partner functions
data is not complete:
I can't proceed from there. If I choose account group 001, it is working, when I am doing with my own account grp gets eorror.
I hope I did correct partner determination procedure.
how to solve this?

Hai Jobi Thottungal,
Since you can create a Customer with Account type 001, please check what is the PARTNER TYPE assigned.
Now, GO TO
IMG Sales and DistributionMaster DataBusiness PartnersCustomersCustomer Hierarchy
Set Up Partner Determination for Customer Master
Partner Determination Procedure Assignment
Assign the Partner procedure to your Account group
So at the time of creation of Customer master with your Account group, the partner function will get created automatically.
Regards,
Mani

Modifying Customer Master Data - Internal error - Message no. F2531

Hi experts,
We have updated the bank details of a specific customer master data. Now when we display it, specifically in bank details, we get the following error message:
Internal error: FI_TECH_ACCNO_READ_TRY SY-SUBRC <> 0
Message no. F2531
Does anyone know what it means? Can anyone help me?
Thanks in advance.
Best regards,
Andreia Nascimento

Hi Andrea,
This message is a SAP standard message and it is not modyfiable in OBA5. The one reason for this may be you are trying to enter bank account which programme is not able to find. If this is not in your case you can take help of abaper and debugg the program.
Regards

End User Doc. Create / Change Customer Master Data

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi Experts,
I would appreciate, if anyone of you could forward me the end user documents for creating & changing customer master data.
sonicasmailbox at rediff
Points will be assigned.
Regards
Sonica

Hi
Refer to help.sap.com for creating customer master data.
Copy this to word document and it will be become user manual.
http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c64124811d2806f0000e8a495b3/content.htm
Additionally refer to this weblink
http://web.mit.edu/cao/www/AR/ar1/ar_FD01.htm - This if for FICO only.
Changing customer master record.
Use T.Code XD02.
Enter Customer No,Company code,Sales Org, Distribution channel and division and press Enter or
Enter Customer no,company code and click on customer's sales area, you will see Sales Org, Distribution channel and division,select the Sales org,Sales Org, Distribution channel and division and press enter.
You can make necessary changes to customer master
Please let me know if you need more information.
Asssign points if useful.
Regards
Sridhar M

Auto creation of Batch master data when external batch no entered in PR

Dear All,
At persent we can auto create batches at production order creation level, Goods receipt level.
In same way how we can achive auto creation of Batch master data at Purchase Requisition level.
Regards,
Manoj

There is no auto-creation of batches that are entered in ME51N. SAP issues message ME178 telling you that the batch entered does not exist.
You have to maintain the batch in MSC1N first, then you can enter it in the PR.

Change Message Control for Customer Master data

Hi Friends,
I have to choose/populate a message when the user is about to create an already existing customer.
In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
OK...
When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
Now .....
I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
I want to have the same message with message types 'E','E', and 'I' respectively.......
How is this possible (or) what should i do to meet my requirement :-|
Expecting ur answers
Thanks in advance ........
Cheers,
R.Kripa.

Hey yes it is not possible (as of now
I ve met the requirement by just using message statement in the program itself ............
My requirement is met but still if anyone knows about this do answer / reply
Thanks
Cheers,
R.Kripa.

Steps to create customized Master data infoobjects in BI 7

Hi all,
Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
Regards,
G.Monica Roja Flora.

Some data modelling tips while creating master data infoobject and extracting data from different source systems -
If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
For example, the same customer number may describe different customers in different source systems.
You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
Hope it Helps
Chetan
@CP..

Cannot Enter more than 1000 partners in Customer master data(Partner Funct)

Dear Friends,
In Customer Master Data -> Sales Area Data -> Partner Functions-> I can able to enter 1000 partners.
Now When I am trying to enter more than 1000 partners, system is not allowing me(no lines are available to enter partner)
According to my requirement I have to enter another 500 partners(business requirement)
Please suggest me how can I able to enter more than 1000 partner in customer master.
Quick reply will be appreciated and rewarded.
Thank you

Hello,
It is very clear that, unless you change the Data element for KNVP-PARZA, the system will not allow you to maintain morethan 999 partner functions for a cusotmer master.
This is very exceptional case and I handled the situation in my project with the Duplication of customer master data for Sold to party and maintained the remaining partner functions over there.
Please check with your Business/ Architect team whether they allow this. As an alternative, they have to go with duplication of sold to party for the maintanance of additional ship to parties.
OR
Should go for char length changes for data element KNVP-PARZA (NOT RECOMENDED).
Hope it helps. Let me know if not.
Thanks,
Ram.

How to find the Acoount Group used while creating the customer master data.

Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.

Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Similar Messages

Maybe you are looking for