Error during install lync server

hi
i got below problem please help me
i put link please check it
http://upload7.ir/imgs/2014-09/32694048088522073471.png

Click View Log to check the exact error.
You can refer to the following links about the same error:
http://terenceluk.blogspot.com/2013/01/lync-server-2013-prepare-forest-fails.html
http://communicationsknowledge.blogspot.com/2014/02/serverschemapreoparetask-execution.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

Similar Messages

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error while installing vCenter Server 6.0

Hello!
Got error while installing vCenter Server 6.0 on a Windows 2012 R2. During install pop-up said "An error occured while starting service 'invsvc'". What is the matter? Should I simply repeat the setup process? Few log files from big zip-file are attached. Please say what else files from the log pack you need. Thanks.

Please refer following KB and see if you have any of those conditions matching in your win 2012 R2 machine. Correct them before you begin with reinstallation.
https://support.microsoft.com/en-us/kb/834484

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

Integrity constraint error during install

We have installed htmldb on zlinux from the companion CD.
Because we had an error during install of the flows schema we repeat it (have removed the Flows-User and Flow-Files before) using ins.sql! The apache was still running.
Most of the new installation was fine but near the end we got:
error creating "Procedure arguments" id=122 Ora-01400, cannot insert NULL into ("FLOWS_010500,"WWv_Flows_STEPS","SECURITY_GROUP_ID")
declare
Error at line1
Ora-02291- integrity constraint(FLOWS_0150000.WWV_FLOW_PLUG_ZO_PAGE_FK) violated
parent key not found
ORA-06512 at "FLOWS_01500.WWV_FLOW_API line 4695
...

OK, it's solved:
I finally managed to install Apex 3.0 correctly once I figured out my error.
I was logging in remotely to the server the dadbase was on, then trying to connect to sqlplus using 'sys/password@instance as sysdba' to run the script.
Turns out that the problem had something to do with sys not being allowed to be sysdba when I log in remotely, or that having the username/password and instance info in there made the program think I was logging in remotely and therefore not giving me sysdba privileges.
The root of the problem was running the install .sql without the correct privileges.
Since I found out the database server I was trying to install on uses OS authentication, I remote-connected to the database server as the oracle user, tried to run the install .sql again after connecting to sqlplus: 'conn / as sysdba'
and everything worked like a charm!
~PF :)

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine

Hi Team,
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
Feature enabled and with Latest version.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
Regards,
Muthukumar.S.P.

Hi,
Can you follow workaround mentioned in below msdn blog
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
As per the blog you have to open the msi log files which must be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error While Installing SQL SERVER 2012 on Windows Serrver 2012 R2

I encounter the following errors while installing SQL SERVER on Windows SERVER 2012 R2, can anybody help me out?
dotdazzle

If you are using any system account then password is not needed. From the screenshot I see NT Authority\.... so you don't need password.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Error while installing IDES server.

Dear all,
Error while installing IDES server.
ERROR 2003-05-16 21:31:54
MOS-01011 'E:/usr/sap/IDS/SCS01/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2003-05-16 21:31:54
FCO-00011 The step createService with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0|createService was executed with status ERROR .
Regards,
Madhu s
Edited by: madhus.frnds on Sep 27, 2009 11:24 AM

Hi,
Please post the sapint.log file.
Thanks,
Shambo

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

FCP error during install.

I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?

This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan

WRT160N error during install

I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
Don

As you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Error during install lync server

Similar Messages

Maybe you are looking for