Error during loading of initialization data for 0ic_c03

Hi
I am setting up the inventory cube 0IC_C03 for stock reports. I am following the document How to Scenarios for inventory management.
I have made the necessary preperations in the R/3 side. The setup tables have been populated and the data is visible using rsa3.
Now in BW i have created infopackages for the 3 data sources 2LIS_03_BX / BF / UM.
For 2LIS_03_BX the update status is generate initial status
For 2LIS_03_BF the update status is initialize delta process
For 2LIS_03_UM the update status is initialize delta process
I am now trying to upload the data for stock initialization by scheduling the 2LIS_03_BX infopackage for an immediate pull. However in the manage are there are no records being transferred (0 of 0 records) and the status of the request is yellow.
Is there some interim step that i am perhaps missing?
Regards
Pranav

Hi AHP / Aby
The update was going on for an elongated period of time so I set the QM status to red and have restarted the data pull. This time the data did come to the BW system but still showed an error.
The details panel shows the following information
> Overall status : Errors occured or missing messages
> Requests everything ok (green light)
>Extraction : Errors occured (yellow light)
>>25000 records sent (yellow)
>>22115 records recieved (green)
>Transfer (Idocs and TRFC) Errors occurred
>> Data package1 :25000 records arrived in BW (green light)
>> Data package 2 : arrived in BW. Data records for package 2 in PSA-1 er (red light)
>Processing (Errors Occured) (red)
>> Data package1 (25000 records):missing messages (yellow)
>>>update PSA (25000 records posted) : no errors (green)
>>>transfer rules (25000 records >25000 records) : no errors (green)
>>>Update rules (25000 >39027 records): no errors (green)
>>> Update (0new/0 changed) Warning recieved(red)
>>>>Data records for package 2 selected in PSA 1 error
>>>>>>>> record 1965 : value of characteristic 0batch contains invalid number
>Processing End : Errors occured
>> Error 4 in the update
According to my understanding of the situation there is a data error in the record 1965 in the second package. Is it possible / advisable to go an edit this in the PSA? If not then what is the procedure to be adopted. Since this is an initiallization and not a delta update i am not sure whether i should pull this again!
Thanks in advance and for all the help so far! its really appreciated!
pranav

Similar Messages

Error during loading of transaction data: An RFC call-up triggered the ...

Dear Sirs,
during loading of master data from a 4.6C SAP system to BI 7.0 SP9 I get the following error during processing (data packet).
"An RFC call-up triggered the exception (ID: RSAR NO: 503) "
The strange thing with this error is that it emerged today, after successfully loading master data and a subset of transaction data yesterday from same source system.
Has anyone else come across this error, and can tell us where we should look for a possible solution? (or a better error explaination).
The RFC connections works fine when testing in SM59, and was functioning yesterday. No relevant dumps in either system.

Hi folks,
I am also interested in this error.
Thanks.

Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked' .
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

PO Change O/P error- Maintain outgoing EDI-connection data for partner for

Hi Experts ,
We are connecting our SAP ECC 6 ( Ehp 4) sytem to 3rd party system via SAP PI. We already done all the settings..line Output detemination procedure, Partner Profile ( WE20) , Port creation , Condition Records..etc.
We have PO Creation ( ZCRE) and PO Change ( ZPOC) Outbound messages to go from our system. Both have sepate message Types, since PO Creation IDOc should go immidiatly ( Dispatch time 4-Send immediately (when saving the application)
and PO Change IDoC should send as per wish manully in ME9F ( Dispatch time -3 Send with application own transaction).
Once PO Created , Output Message successfully triggering and IDoC is creating ( Green Color) ..so it is working fine .
Fo PO Change Message we had selcted Program -FM06AEND & FORM routine -CHANGE_FLAG.
We also set "Multiple issuing " checkbox in the Output Type and no requierment is assigned.
In WE 20, for Logical system ( LS) Partner XYZ, we set Process code ME11 and checked "Change Message"
1. But when I change PO Qty , output is not automaticaly triggering .After changing PO, if we see determination Analysis, in Procedure RMBEF1, this output ZPOC shows 2 times. First, it shows green color,...Output Found , and second times, it displays, "partner XYZ is not an EDI partner"
2. If we try to manually enter the Output ZPOC in PO Header, then system gives the Error - Maintain outgoing EDI-connection data for partner XYZ.
Can anyone pls suggest what should be the reason for above?
Thanks
NAP

Issue Resolved .
The reason for this system behaviour is in fine-tuned control: We was
using ZMIN only for new message output and ZCHG only for change messagesNevertheless, you can maintain two entries in WE20 for ORDCHG:
EF ZCHG ME11 w/o Change message flag
EF ZCHG ME11 with Change message flag
Thanks

Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60

Dear All,
I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
How to overcome this issue and if you already encounter this kind of problem please advice me.
Thanks in Advance.
Deesanth

Hi,
Below is my recording.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'INVFO-ACCNT' gwa_inv_up-lifnr.
    perform bdc_field       using 'INVFO-BLDAT' gwa_inv_up-bldat.
    perform bdc_field       using 'INVFO-XBLNR' gwa_inv_up-xblnr.
    perform bdc_field       using 'INVFO-BUDAT' gwa_inv_up-budat.
    perform bdc_field       using 'INVFO-MONAT' '9'.
    perform bdc_field       using 'INVFO-BLART' gwa_inv_up-blart.
    perform bdc_field       using 'INVFO-WRBTR' gwa_inv_up-dmbtr.
    perform bdc_field       using 'INVFO-WAERS' gwa_inv_up-waers.
    perform bdc_field       using 'INVFO-XMWST' gwa_inv_up-xmwst.
    perform bdc_field       using 'INVFO-MWSKZ' 'P0'.
    perform bdc_field       using 'INVFO-SGTXT' gwa_inv_up-sgtxt.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'BDC_OKCODE'   '=PAYM'.
    perform bdc_field       using 'INVFO-GSBER' gwa_inv_up-gsber.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'BDC_OKCODE'   '=BS'.
    perform bdc_field       using 'INVFO-ZLSCH' gwa_inv_up-zlsch.
    cnt = 1.
    cnt1 = 1.
    clear gwa_inv_line.
    loop at gt_inv_up into gwa_inv_line where indic = 'D'
                                   and count = gwa_inv_up-count.
      if cnt1 gt 1.
        concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
        perform bdc_field using fld 'X'.
        perform bdc_dynpro using 'SAPMF05A' '1100'.
        perform bdc_field using 'BDC_OKCODE' '=0005'.
      endif.
      concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-lifnr.
      concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-shkzg.
      concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-dmbtr.
      concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-mwskz.
      concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-sgtxt.
      concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-gsber.
      concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-kostl.
      concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-posid.
      concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-fistl.
      concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-fipos.
      concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-geber.
      perform bdc_field       using 'BDC_CURSOR' fld.
      cnt1 = cnt1 + 1.
    endloop.
    perform bdc_dynpro using 'SAPMF05A' '1100'.
    perform bdc_field using 'BDC_OKCODE' '=BS'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE' '=BP'.
    call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
                                    messages into gt_bdc_messages.
Thanks,
Deesanth

X201 - Error while loading driver \Driver\WUDFRd for device USB\VID_147E&PID_2016\6&32feb3ab&0&3.

Hello,
i got this message in eventviewer after boot into Windows 7 x64:
Error while loading driver \Driver\WUDFRd for device USB\VID_147E&PID_2016\6&32feb3ab&0&3.
other versions of driver are tested (direct from UPEK and from MS Update catalog) but won't work too :-(
Fingerprintsuite is now deinstalled (only latest driver from UPEK installed ) and message is still existing!!!
If driver is not installed, no error message!
Cables are checked and ok:
Has anyone got an idea?
regards
Martin

Hi
Welcome to Lenovo Community
Try uninstalling the driver and clear it from windows registry .
Then Update the Bios to latest , after that install the drivers
Bios Update
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6quj17us.exe
FingerPrint reader
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83f807ww.exe
Hope This Helps
Cheers!!!

Error while loading service SLD Data Supplier

HI All,
I am getting an error when i am trying to access the SLD Data Supplier via Visual Administrator.
Error while loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Can somebody tell me how to fix this?
Regards
Prakash

Hi Nigel,
thanks a lot - I can now access the SLD data supplier from my local visual admin- great!
unfortunately, the key storage service still throws the error:
java.lang.NoClassDefFoundError: iaik/x509/V3Extension
at com.sap.engine.services.keystore.admin.gui.KeystoreContentPanel.<init>(KeystoreContentPanel.java:34)
at com.sap.engine.services.keystore.admin.gui.SingleKeystoreViewPanel.<init>(SingleKeystoreViewPanel.java:31)....
Do you know if it's something different with the key storage?
Best regards
Cornelia

Error during gen of subscren container for screens [BP sales,shipping data]

Hi,
during the intial download from ECC to CRM ,sales,shipping data is not comming with BP.
i found one solution for this problm through BUSP transaction to genarate subscrenn container for screens.
I have genarated everything .But it throws error.
The error message is
"Client 101 appl.object BUPA screen $00001:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes."
Plz anyone help me to solve this problem.
regards
geetha.g

Hi,
Even i am facing similar problem like this..
in my case,
its working in one clinet and its not able to regenerate successfullu in another client.
its showing the same above error.
I tried removing the error by running the report BDT_VCT_CORR_001 and again generating the screens... but it was of no use..
can any one sugesst me some other points
with regards,
Sumanth

Error during loading of initialization data for 0ic_c03

Similar Messages

Maybe you are looking for