Error during Maintain Source List

Hi Experts,
I am getting error while creating Source as below,
"Source list for the material  XXXXX and plant  XXXX already being processed "
Please suggest the what needs to be done.
Regards
Sham

Hi,
I did the still the same eror,
One observation is in ME03, when i execute after enetering material and plant, the line items are blank.
Will this help you in analysing further?
Regards
Sham

Similar Messages

  • Error during maintaining schedule lines in ME38

    Dear All ,
               While I am trying to add schedule lines in ME38 for a schedule agreement system is giving error message
    "Message no. 06 881.   The vendor is blocked by Quality Management for this material as from the date shown."
               Plz let me know the reasons for this .
    Regards
    Abhijit Das

    hi,
    check few things:
    1. check whether you are doing the del schedule only on the given dates in the shedule agreement...
    2. check whether the material is blocked in the source list...check the validity dates also...
    Hope it helps..
    Regards
    Priyanka.P

  • Error during trusted source reconciliation

    Hi,
    I'm facing some issue using Database Applications Table connector (DBAT_91050).
    I've correctly installed the connector and created a simple table in a database schema (first name, last name, emp_id, role (everything as varchar2)).
    Then I've created a generic connector for a trusted source and made the mapping.
    When I try to run the job to reconcile my source I receive the following error:
    Caused By: org.xml.sax.SAXParseException: cvc-minLength-valid: Value '' with length = '0' is not facet-valid with respect to minLength '1' for type 'matchingRuleType'.
    at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
    at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
    at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
    at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
    at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportError(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator.processElementContent(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
    at org.apache.xerces.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
    at org.apache.xerces.jaxp.validation.ValidatorHandlerImpl.endElement(Unknown Source)
    at com.sun.xml.bind.v2.runtime.unmarshaller.ValidatingUnmarshaller.endElement(ValidatingUnmarshaller.java:106)
    at com.sun.xml.bind.v2.runtime.unmarshaller.InterningXmlVisitor.endElement(InterningXmlVisitor.java:81)
    at com.sun.xml.bind.v2.runtime.unmarshaller.SAXConnector.endElement(SAXConnector.java:158)
    at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:255)
    at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:281)
    at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:250)
    at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:281)
    at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:250)
    at com.sun.xml.bind.unmarshaller.DOMScanner.scan(DOMScanner.java:127)
    I've already read Re: Trusted source Object Reconciliation Mapping for act_key - 11g Realease2 but I'm not able to apply the solution to my case.
    No rules and no transformations are applied during the map.
    Thank you.

    Hi,
    I did as you suggested, but I didn't get some point:
    - Then see whether User ID is marked as "Key for reconciliation"...
    Is the USERID an attribute of my table? I've mapped a field called idemp with "Employee Number" and I've set this as Key for reconciliation.
    Is this correct?
    - Open up the Recon Rule for TEST_GTC...
    In my reconciliation rules tab there are only 4 rules:
    DBUM Oracle Target recon
    MySQL Oracle Target recon
    Oracle DB Trusted
    MySQL DB Trusted
    and for each of them both checkboxes are checked.
    Do the table show more rules or the one I'm interested in is "Oracle DB Trusted"?
    I've created the reconciliation profile but I can't see any new table in my DEV_OIM schema.
    Performing "select table_name from user_tables where table_name like 'RA%HR%'" (my Resource is called HR_CONN)) only one row is returned: RA_HR_CONN_GTC
    The table is empty and appears like:
    RECON_TABLE_KEY NOT NULL NUMBER(19)
    RE_KEY NUMBER(19)
    RECON_CHGLOGATTR_IDXLST VARCHAR2(256 CHAR)
    RA_LAST_NAME VARCHAR2(150 CHAR)
    RA_ROLE VARCHAR2(255 CHAR)
    RA_NAME VARCHAR2(150 CHAR)
    RA_AGE VARCHAR2(256 CHAR)
    RA_IDEMP VARCHAR2(80 CHAR)
    RA_MIDDLE_NAME VARCHAR2(80 CHAR)
    Thank you.

  • Error during DataBase source creation in SES.

    Hi Experts,
    As part of creating DataBase source for SES...
    We created a table testing_data_for_ses(URL,CONTENT,LASTMODIFIEDDATE,KEY,LANG)
    and also the view
    create or replace view view_testing_data_for_ses AS
    SELECT 'docserver?docid=' || URL URL,
    CONTENT CONTENT,
    lastmodifieddate lastmodifieddate,
    KEY KEY,
    'en' LANG
    FROM testing_data_for_ses;
    Finally we tried to create DataBase source in SES with following parameter names and values
    Database Connection String: jdbc:oracle:thin:@<systemIP>:<port>:<SID>
    User ID : apps
    Password : apps
    View : view_testing_data_for_ses
    Document Count : -1
    Query : select content from testing_data_for_ses
    URL Prefix : http://<SES-Hostname>:<SES-Port>
    However in this process we ended up with following Error:
    09:55:53:750 INFO     main          
    09:55:53:761 INFO     main          Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
    09:55:53:761 INFO     main          Copyright © 2006, 2007, Oracle. All rights reserved.
    09:55:53:761 INFO     main          
    09:55:53:761 INFO     main          ================== Crawling settings ==================
    09:55:53:761 INFO     main          Reading configuration file from /mnt/u08/SOADEVIL/ses/seshome/search/data/config/crawler.dat
    09:55:53:762 INFO     main          Agent = Oracle Secure Enterprise Search
    09:55:53:800 INFO     main          User = EQ_TEST
    09:55:53:800 INFO     main          Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=DEVIL1.hostname)))
    09:55:53:800 INFO     main          Source type is User-defined
    09:55:53:800 INFO     main          Source is "DatabaseSource_B"
    09:55:53:800 INFO     main          Number of crawling threads = 5
    09:55:53:800 INFO     main          Queue table = I1S3
    09:55:53:801 INFO     main          URL table = EQ$URL
    09:55:53:801 INFO     main          Maximum documents to crawl = no limit
    09:55:53:801 INFO     main          Maximum depth to crawl = 2
    09:55:53:801 INFO     main          Document size limit = 10M
    09:55:53:801 INFO     main          Locale of the crawler message is "en_US"
    09:55:53:801 INFO     main          URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
    09:55:53:801 INFO     main          URL exclusion rule = \?.*(.*\+)\1{3}
    09:55:53:801 INFO     main          Document read timeout threshold = 30 second(s)
    09:55:53:801 INFO     main          Crawler default character set is "8859_1"
    09:55:53:801 INFO     main          Crawler default language is "en"
    09:55:53:802 INFO     main          Auto language detection is on
    09:55:53:802 INFO     main          Auto character set detection is off
    09:55:53:802 INFO     main          Document service pipeline is "Default pipeline"
    09:55:53:802 INFO     main          Verbose mode is on
    09:55:53:848 INFO     main          Caching on: directory = /mnt/u08/SOADEVIL/ses/sesdata/DEVIL1/cache/I1DS3/, max size = 250, action = SES_TASK
    09:55:53:848 INFO     main          Filtering on: filter path = /mnt/u08/SOADEVIL/ses/seshome/ctx/bin/ctxhx, number of filters = 2
    09:55:53:849 INFO     main          MIME inclusions = text/plain text/html application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
    09:55:53:849 INFO     main          URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
    09:55:53:849 INFO     main          SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
    09:55:53:849 INFO     main          Cookie support is enabled
    09:55:53:850 INFO     main          Maximum number of cookies = 300
    09:55:53:850 INFO     main          Maximum number of cookies per host = 20
    09:55:53:850 INFO     main          Maximum size of cookie = 4096 bytes
    09:55:53:851 INFO     main          Cache file deletion is disabled
    09:55:53:851 INFO     main          Crawler plug-in manager class is "oracle.search.plugin.db.DBCrawlerManager"
    09:55:53:851 INFO     main          SQL hook ID is "3"
    09:55:53:851 INFO     main          SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
    09:55:53:851 INFO     main          SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
    09:55:53:851 INFO     main          Crawler launched by schedule "DatabaseSource_B"
    09:55:53:851 INFO     main          
    09:55:53:851 INFO     main          =================== Crawling status ===================
    09:55:53:852 INFO     main          Crawling started at 10/3/07 9:55 AM
    09:55:55:463 INFO     main          URL manager connecting to Oracle...
    09:55:55:524 INFO     main          connected
    09:55:56:712 INFO     main          Time of last crawl is Wed Oct 03 09:44:11 EDT 2007
    09:55:56:755 INFO     main          Queue manager connecting to Oracle...
    09:55:56:853 INFO     main          connected
    09:55:58:088 INFO     main          Invoking "oracle.search.plugin.db.DBCrawlerManager"
    09:55:58:092 INFO     main          URL manager connecting to Oracle...
    09:55:58:241 INFO     main          connected
    09:55:58:243 INFO     main          Initializing crawler plug-in manager "oracle.search.plugin.db.DBCrawlerManager"
    09:55:58:245 ERROR     main     EQP-80401: Cannot specify both view and query oracle.search.sdk.crawler.PluginException     oracle.search.plugin.appsjdbc.AppsJdbcPluginMgr:init:255     oracle.search.plugin.appsjdbc.SecureAppsJdbcPluginMgr:init:50     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:48009:55:58:484 INFO     Thread-1          Remote command "reportstatistics" received, argument = "quit"
    09:55:58:484 INFO     Thread-1          Executing remote command "reportstatistics"
    09:55:58:506 INFO     Thread-1          Send back remote command execution result
    09:55:58:852 INFO     main          Shutting down all crawling threads...
    09:55:58:855 INFO     main          
    09:55:58:855 INFO     main          =================== Crawling results ===================
    09:55:58:855 INFO     main          Crawling started at 10/3/07 9:55 AM
    09:55:58:856 INFO     main          Crawling stopped at 10/3/07 9:55 AM
    09:55:58:856 INFO     main          Total crawling time = 0:0:5
    09:55:58:856 INFO     main          
    09:55:58:877 INFO     main          Total number of documents fetched = 0
    09:55:58:879 INFO     main          Document fetch failures = 0
    09:55:58:880 INFO     main          Document conversion failures = 0
    09:55:58:880 INFO     main          Total number of unique documents indexed = 0
    09:55:58:880 INFO     main          Total data collected = 0 bytes
    09:55:58:880 INFO     main          Total number of non-indexable documents = 0
    09:55:58:880 INFO     main          
    09:55:58:880 INFO     main          Number of times disk cache is full = 0
    Are we specifying any wrong parameter values.
    Thanks
    parker.

    Hi raford,
    Thanks for your reply.
    We just provided the view name....and hence the DataBase source got created successfully.
    Now we have two scenarios here
    1)
    DataBase source in SES with parameter value for URL Prefix : http://<SES-Hostname>
    Now when we searched for content... The SES gets us the results....
    However when we clicked on the searched result(which is http://<SES-HostName>:<SES-port>/search/query/redirect.jsp?qid=161&did=2001&pos=1&idx=1&fid=)...it says cannot find server...but when i click on cached link(which is http://devilrays.appsassociates.com:7782/search/query/cache.jsp?id=2001&q=row3&fid=)... i could see the whole content.
    2)
    DataBase source in SES with parameter value for URL Prefix : http://<SES-Hostname>:<SES-Port>
    Now when we searched for content... The SES gets us the results....
    However when we clicked on the searched result(which is http://<SES-Hostname>:<SES-Port>/search/query/redirect.jsp?qid=151&did=1901&pos=1&idx=1&fid=)...it says HTTP 404 not found...but when i click on cached link(which is http://devilrays.appsassociates.com:7782/search/query/cache.jsp?id=1901&q=row3&fid=)... i[b] could see the whole content.
    Are there any changes i need to do so that when i click on search result... it gets me the content.
    Thanks
    parker.

  • Error during transformation : Source parameter is not being used

    Hi,
    I am trying to map two fields from datasource into one field in DSO i.e
    Assigned Plant and storage location to Plant_storage infoObject.
    but I am unable as I am getting the error below.
    Rule (target: ZOBJ): Source parameter 0140 is not being used
    Message no. RSTRAN502
    Procedure for System Administration
    Internal rule ID 68
    I have checked online and seen related SAP notes but they are meant for BW 7.0. My system is BW 7.3
    how can I resolve this issue.
    thanks
    Bhat

    Hi Bhat,
    When you are using two source fields are you doing the result calculation through routine or formula?
    Just check if you are using any of these thing then both the source fields are getting used in the routine code.
    Regards,
    Durgesh.

  • SSTemplate.xlt Error during 'Maintain Dimension Member' in BPC Admin

    Hi,
    While trying to 'maintain dimension member' in BPC administrator (BPC 7.0 Netweaver version) for a dimension,I get error message that 'C:\...Temp\SSTemplate.xlt' file could not be found.
    Due to this I am unable to maintain members for any dimension.
    If anyone has faced this issue and resolved it,could you please me out?
    Thanks in advance,
    Rinal

    Dear Rinal Parmar,
    I think that the dimension file which you mean is lose from the directory(the directory which you installed the SAP BPC). If you've backup the Appset before, please you find the dimensian file (.xlt) which is lose in the backup directory. After that, you copy paste into the exactly directory (the directory which you installed the SAP BPC). Then, You should process dimension and process application again.
    Thanks,
    Wandi

  • Error in Source list creation

    Hi,
    When i am trying to create a Source list for the material with vendor in the given Pruchase organisation,
    i am gettign an error "Vendor does not have purchasing data" .
    Pls suggest me what i do to avoid this error and create source list
    Thanks

    HI,
    Maintain purchasing data for that vendor in MK01
    eg terms of payment,
    schema group
    check - GR based IV
    Order currency
    service based IV
    Shipping conditions
    Planned delivery time etc
    Regards,
    Uzair
    Edited by: Mohd Uzair Hussain on Jun 27, 2009 3:11 PM

  • What are the disadvantages of maintaining the source list?

    Hi,
    I understand that once source list is activated for plant in customizations, it has to be maintained for all the materials which are extended for the said plant, Is it true? Can I maintain only for selected materials?
    I also understand if it is maintained for material then, we can not create PO for other source for which it has not be maintained in source list.
    Thanks in advance,
    Satish

    hi
    There are no disadvantages if you maintain source list. Infact it helps lot of other functionalities other than purchasing. if you make source liost mandatory then it it required that for that particular material you need to have sourcelist  in Txn ME01.  You can have  list of vendors who are approved and put all of them in the source list for the material.  Yes you can always have independent sourcelist for a single material. Unless until you make it mandatory in customising there is no problem in PO creation. If you have made it mandatory  and you wish to create a PO for a new vendor who is not there in Source list then it is not possible to create a PO. However you can add the new vendor in the source list and go on creating the PO.
    Regards

  • Creation Info Record at Material group,Source List & Assign source to PR

    Hi All,
    Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
    Completed at my end:
    1. Creation of Info Record at Material Group level
    2. Maintained Source List at Material level.
    Issues/ Errors:
    1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
    2. Material differs from the Material from the Info Record.
    Help / Information required :
    1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
    2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
    Can anyone please provide the soilution to the above points?
    Thanks in advance for the solution.
    Regards,
    Pavan.

    Hi Please create Contract and refer same while source list. This will help
    Regs,
    AD

  • Source List Mandatory at RFQ level

    Dear SAP MM Gurus,
    We want to make source list mandatory at RFQ level. In standard, it's not possible.
    I have also found out one thread on SDN, but there isn't any satisfactoy answer for it.
    I have also tried to find out BADI / User exit for ME41. There are so many user exits, but none of them is workfing for my requirement.
    I have tried function module - EXIT_SAPMM06E_012, but for this when i activate user exit, system gives error for "Dynpro not found".
    Any help in this regard will be highly appreciated.
    Thanks & Regards,
    Mihir Popat

    Hi,
    Thanks for your reply.
    My requirement is like this:
    In t code ME41,when I am creating an RFQ, I will enter vendor code and then i will press "SAVE".
    I want system to check for Vendor entered at the time of "SAVE". If vendor is maintained in source list, then only system should allow creation of RFQ.
    If vendor is not maintained in source list, system should give error saying that "Please maintain source list, first" and RFQ should not be created.
    Regards,
    Mihir Popat

  • Datasource for Purchasing Source List

    Hello Guys
    i need to find datasources for "purchasing source list" that are stored in EORD table ( you can see these data with transaction ME03, ME01).
    Any one knows the datasources to keep these data in BW ?
    thanks in advance
    Boris

    Hi,
    Please find the code below .
    REPORT ZSOURCE.
    TABLES: EORD,
            EINA,
            MARC.
    Batch Input Name
    PARAMETERS P-BTCHSN(12)            DEFAULT 'ME01'.
    Vendor Code
    PARAMETERS P-LIFNR LIKE LFA1-LIFNR DEFAULT 'XXXXX'.
    Material Group
    PARAMETERS P-MATKL LIKE MARA-MATKL DEFAULT 'XXXXXXX'.
    Plants
    PARAMETERS P-WERKS LIKE EORD-WERKS DEFAULT 'XX'.
    Tick Block/Untick Unblock
    PARAMETERS P-NOTKZ LIKE EORD-NOTKZ DEFAULT 'X'.
    Auto / Manual run the Batch Input Program
    PARAMETERS P-RUN   AS CHECKBOX     DEFAULT 'X'.
    INTERNAL TABLE FOR DATA
    DATA:  BEGIN OF ULTAB OCCURS 50,
             MATNR LIKE EORD-MATNR,   "Material No.
             WERKS LIKE EORD-WERKS,   "Plants
             ZEORD LIKE EORD-ZEORD,   "NO
             LIFNR LIKE EINA-LIFNR,   "Vendor Code
           END OF ULTAB.
    INTERNAL TABLE FOR BATCH INPUT DATA
    DATA: BEGIN OF IPUTTAB OCCURS 50.
            INCLUDE STRUCTURE BDCDATA.
    DATA: END OF IPUTTAB.
    INTERNAL TABLE FOR BATCH INPUT ERROR MESSAGE.
    DATA: BEGIN OF MESSTAB OCCURS 50.
            INCLUDE STRUCTURE BDCMSGCOLL.
    DATA: END OF MESSTAB.
    DATA: C_TAXKM LIKE MG03STEUER-TAXKM VALUE '1',
          W-LINE-NO TYPE I.
    REFRESH ULTAB.
    SELECT * FROM EINA WHERE LIFNR = P-LIFNR
                         AND LOEKZ = SPACE.
      SELECT SINGLE * FROM MARC WHERE MATNR = EINA-MATNR
                                  AND WERKS = P-WERKS.
      CHECK MARC-LVORM = SPACE.
      CLEAR ULTAB.
      SELECT * FROM EORD WHERE MATNR = EINA-MATNR
                           AND WERKS = P-WERKS
                           AND LIFNR = P-LIFNR.
         ULTAB-MATNR = EORD-MATNR.
         ULTAB-WERKS = EORD-WERKS.
         ULTAB-ZEORD = EORD-ZEORD.
         ULTAB-LIFNR = EORD-LIFNR.
         APPEND ULTAB.
      ENDSELECT.
      IF SY-SUBRC = 4.
         ULTAB-MATNR = EINA-MATNR.
         ULTAB-WERKS = P-WERKS.
         ULTAB-ZEORD = ''.
         ULTAB-LIFNR = EINA-LIFNR.
         APPEND ULTAB.
      ENDIF.
    ENDSELECT.
    CHECK WHETHER TABLE IS EMPTY
    IF ULTAB[] is initial.
       WRITE: / 'TABLE EMPTY'.
    ENDIF.
    Create Batch session
      PERFORM CRE-BATCH-SESS.
    LOOP TABLE TO CREATE SCREEN INPUT
    SORT.
    LOOP AT ULTAB.
      REFRESH IPUTTAB.
      PERFORM SCREEN1.
      PERFORM SCREEN2.
      PERFORM PRN_ULTAB.
      PERFORM CLOSE-SESS.
    ENDLOOP.
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    END OF MAIN PROGRAM
    FORM SCREEN1.
    SCREEN #1: INITAL SCREEN FOR MAINTAINING SOURCE LIST
      CLEAR IPUTTAB.
      IPUTTAB-PROGRAM = 'SAPLMEOR'.
      IPUTTAB-DYNPRO  =  '200'.
      IPUTTAB-DYNBEGIN = 'X'.
      APPEND IPUTTAB.
    Source List : Material No.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-MATNR'.
      IPUTTAB-FVAL =  ULTAB-MATNR.
      APPEND IPUTTAB.
    Source List : Plants.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-WERKS'.
      IPUTTAB-FVAL =  ULTAB-WERKS.
      APPEND IPUTTAB.
    ENDFORM.
    FORM        : SCREEN1                                               *
    FORM SCREEN2.
    Modify screen for SOURCE LIST
      CLEAR IPUTTAB.
      IPUTTAB-PROGRAM = 'SAPLMEOR'.
      IPUTTAB-DYNPRO  =  '205'.
      IPUTTAB-DYNBEGIN = 'X'.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-VDATU(1)'.
      IPUTTAB-FVAL = '01.01.2001'.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-BDATU(1)'.
      IPUTTAB-FVAL = '31.12.9999'.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-LIFNR(1)'.
      IPUTTAB-FVAL = P-LIFNR.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-EKORG(1)'.
      IPUTTAB-FVAL = 'ALL'.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-NOTKZ(1)'.
      IPUTTAB-FVAL = P-NOTKZ.
      APPEND IPUTTAB.
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'EORD-AUTET(1)'.
      IPUTTAB-FVAL = '1'.
      APPEND IPUTTAB.
    Specify that we are now done with this screen (Save it with F11)
      CLEAR IPUTTAB.
      IPUTTAB-FNAM = 'BDC_OKCODE'.
      IPUTTAB-FVAL = '/11'.
      APPEND IPUTTAB.
    ENDFORM.
    FORM        : CLOSE-SESS                                            *
    DESCRIPTION : CLOSE THE SESSION                                     *
    FORM CLOSE-SESS.
    closing the session.
    IF P-RUN = 'X'.
    Auto run the Batch Input Program
    CALL TRANSACTION 'ME01'
              USING  IPUTTAB
              MODE   'E'
              UPDATE 'S'
              MESSAGES INTO MESSTAB.
    ELSE.
    Maual run the Batch Input Program
    CALL FUNCTION 'BDC_INSERT'
           EXPORTING
                TCODE     = 'ME01'
           TABLES
                DYNPROTAB = IPUTTAB.
    ENDIF.
    ENDFORM.
    FORM        : PRN-ULTAB                                             *
    DESCRIPTION : PRINT OK TABLE                                        *
    FORM PRN_ULTAB.
      WRITE: / ULTAB-MATNR, ULTAB-WERKS, ULTAB-ZEORD, ULTAB-LIFNR.
      W-LINE-NO = W-LINE-NO + 1.
    WRITE: '      RECORD# ', W-LINE-NO.
    ENDFORM.
    FORM        : CRE-BATCH-SESS                                        *
    DESCRIPTION : CREATE BATCH SESSION                    *
    FORM CRE-BATCH-SESS.
    Create BTCI session **
    CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING
              CLIENT = SY-MANDT
              GROUP  = P-BTCHSN
              USER   = SY-UNAME
              KEEP   = 'X'.
    ENDFORM.
    Regards,
    Marasa.

  • Source list requirement inspite of source list

    Hi,
    Can you please solve this error source list requirement list inspite of source list.
    I dont know why I am getting this error.
    Thanks in advance
    Sunil

    Please check two settings
    1. In material master purchasing view you might have check source list requirement.
    2. In spro you might have Materials Management-- PurchasingSource ListDefine Source List Requirement at Plant Level under this for plant you might have activated
    so the is system is expecting a source of supply ..
    Please maintain source list then then this error will be solved
    Regards
    Navin

  • Automatic creation of source lists on contract creation

    Hi,
    Is there anyway to automatically generate a source list when a contract is created for the each line in the contract?  I know that you can go to Item -> Maintain source list, but the business is reluctant to accept this solution since it is an extra step for each line item. Also we have talked about using ME05 to mass produce source lists, but they still have to maintain a database of materials that require source lists which changes often.
    We are in the process of turning on the source list indicator on the material master to ensure that we only source from EPA approved suppliers.
    Thanks in advance,
    Matt

    You can create a variant for the ME05 program RM06W003 and run it as job

  • MRP area in Source list

    Hello
    Can anyone tell me how the MRP Area field (BERID) is maintained in  source list (transaction ME01).  In my system it is greyed out?
    We are running MRP at MRP Area level and I was hoping that this field would allow me to maintain source lists at this level.
    Thanks in advance for your help.
    Kind regards
    Sue

    Hello Sue,
    The MRP area field will appear if you are planning with MRP option 2 - Record relevant to MRP. Sched. lines generated automatically.
    You can see help document below explaining this process:
    http://help.sap.com/saphelp_47x200/helpdata/en/49/d8fe86df2c11d1a6a80000e83235d4/frameset.htm
    I hope it helps.
    Kind Regards,
    Prakash

  • Source List for Material Group

    Hi All,
    How do I maintain a source list for a material group.? Since ME01 requires a material, I cannot create source list in this tranasction.
    The client want a the Source (for material Group) to be assigned automatically in PR assignment step.
    Again, within a material group there can be several infor records, For example:
    Mater Group: Office Supp.....I can have two infor rec for the same vendor....one with "Short Text" Notepad and another info rec with "Short Text": Paperclips. Or the second info record could be a different vendor also.
    How could the system know which one to assign as a source since it's the same material group (one for Notepads and the other for paperclips)??
    Thanks in advance

    Hi duke,
    In SAP we have a choice of creating source list for a "Material Group ". Following is the method.
    You may have the outline agreements related to material group rather than a single specific material - For ex. outline agreement with a item category M( Material unknown) or      W ( material group).In doing so you can decide whether to exclude or include certain materials of the relevant material group by means of the source list.
    To create the source list for a material group proceed as follows.
    1) On the outline agreement overview screen, select the items for which you wish to enter the source list record & choose Item --> Maintain source list
    2) To exclude the particular material keep the "Exclusion" indicator set against a material with a validity period.
    I hope this will be useful to you.
    Vivek

Maybe you are looking for

  • Some mp3s no longer play in itunes 6

    ok this one has me stumped. upgaded my itunes and now some of my music wont play (when it did before). first thing i noticed is that some music icons were changed to quicktime. these would not play even when changing back to itunes (by selecting "ope

  • 32 to 64 bit Oracle.

    Hello Colleagues. I'm have a problem and can't understand that's wrong ... I'm trying Homogeneous System copy win 32 to 64 , ERP SR3 Central system ABAP+JAVA with Backup/Reastore  ... The Source system are installed by Consultant team and i can't cha

  • 'Created By' creating problems.

    Dear all, I have 2 questions: 1. How can the 'Created By' property of a document can be viewed in the KM explorer? I could not find it in the 'Properties' menu. 2.I have created a CM repository in FSDB mode. Will the windows user's name who created t

  • How to use type, packages, functions, and procedures in another schema ?

    I have two target schema in one OWB project, such as A and B. In a mapping of A, I would like to use some types, packages, functions, and procedures from B. I have tried the method of synonym as suggested, but I could not find the metadata of these w

  • User Exit/Enhancement for Customized Price Determination in VF01

    Hi Experts, User would like to change the item price (VBRP-NETWR) in VF01 using its customized logic. Which Exit/Enhancement I should implement to to change the value of VBRP-NETWR before it is displayed out to the user?. What I trying to do is to ov