Error during sending IDoc from XI to R/3

Hi,
I get following error (transaction: sxmb_moni), when I try to send a IDoc from XI to R/3.
Error: Transaction IDX1: Port SAPI14_921, client , RFC destination contain errors.
When I go to transaction sm 59 and start this rfc-destination so it works fine.
Can anybody help me please?
Thanks.
Regards
Stefan

Hi,
I dont now how you pushed the IDOC form R/3 to XI..
Follow this particular way ....
Go to WE19 and execute the IDOC which you want to send and clicl the tab startoutboundprocessing....
then it hits the XI after couple of minutes and then
Go to the XI in that IDX5 where you can see the IDOC messages....
Amaresh

Similar Messages

Error during sending mail from solaris 9

Hi All,
I am trying to send mail from solaris machine.I am using sendmail 8.12.9+Sun.When I am trying to send mail a mail using
#echo "Test mail"|mailx -s "welcome to Solaris" [email protected]
#it is execuitng sucessfully but when I am seeing the /var/log/syslog file,then It showing the error--
/etc/mail/aliases.db out of date
Aug 6 15:51:33 mgsun sendmail[823]: [ID 801593 mail.notice] n76ALXfa000823: <Sang@mgsun>... User unknown
Aug 6 15:51:33 mgsun sendmail[813]: [ID 801593 mail.info] n76ALXZo000813: to=Sang, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31096, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown
00823: from=<>, size=1096, class=0, nrcpts=0, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
00813: n76ALXZp000813: return to sender: User unknown
Aug 6 15:51:33 mgsun sendmail[823]: [ID 801593 mail.info] n76ALXfc000823: from=<>, size=3566, class=0, nrcpts=1, msgid=<200908061021.n76ALXZp000813@mgsun>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
Aug 6 15:51:33 mgsun sendmail[813]: [ID 801593 mail.info] n76ALXZp000813: to=postmaster, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=32120, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (n76ALXfc000823 Message accepted for delivery)
Aug 6 15:51:33 mgsun sendmail[824]: [ID 702911 mail.info] alias database /etc/mail/aliases.db out of date
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.info] n76ALXfc000823: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=33739, dsn=5.3.0, stat=unknown mailer error 5
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.info] n76ALXfc000823: n76ALXfY000824: postmaster notify: unknown mailer error 5
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.info] n76ALXfY000824: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31024, dsn=5.3.0, stat=unknown mailer error 5
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.info] n76ALXfY000824: n76ALXfZ000824: return to sender: unknown mailer error 5
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.info] n76ALXfZ000824: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31024, dsn=5.3.0, stat=unknown mailer error 5
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.alert] n76ALXfY000824: Losing ./qfn76ALXfY000824: *savemail panic*
Aug 6 15:51:33 mgsun sendmail[824]: [ID 801593 mail.crit] n76ALXfY000824: SYSERR(root): s*avemail: cannot save rejected email anywhere*Please help me to resolve it.
Thanks in advance..

Here's some pointers on troubleshooting sendmail:
[http://docs.hp.com/en/B2355-90110/ch05s08.html]
and
qualify my own domain
[http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=149991]
newaliases error - Executable files not allowed
[http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=39966]
HP forums can be good for SUN too. :)

Error during sending sales idoc

hi all,
i m getting error during sending idoc for sales.................
Error:Check value field assignment for Condition PN10.....
How to solve this...?
Regards,
Imran

friends.......argent.......

Sending IDoc from R/3 to XI -ongoing

Hi,
With reference to my previous errors while sending IDoc to XI from R/3 system. I have resolved errors with help of Seshagiri and Kummari advise and help. But now I am getting new kind of error, while sending IDoc from R/3 its getting passed from R/3, but while checking it in XI throug SXMB_MONI I am getting below error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_POCreateIdoc_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_POCreateIdoc_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can any one advise me on this?
Thanks & Regards
Manish

Hi,
There were so many Mapping Objects under different Namespaces and under that different Message Mapping trees.
Under one tree I have tested the XML message and found the below error:
Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
Kindly check if this is the correct error I am getting related to SXMB_MONI error message.
Regards,
Manish

Sending IDOC from R/3 to MII error

Hi,
We are trying to send IDOC from R/3 4.7 to MII 12.1 (SP8 patch 9 on NW CE 7.11).
We followed the guide below:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
Connection of message listener to R/3 works fine.
RFC connection test from R/3 to message listener was successful.
But when we try to do model distribution we get this error " - Communication error occured. Server repository could not create function template for 'MODEL_VIEW_REPLICATE'.
Maybe someone encountered this error and can help to resolve it.
Thanks in advance.

Hi Michael,
What do you mean by "manually registered the ProgID"? The message listener configuration property is as below:
ProgramID: MII_IDOC_CONNECT_5
MaxReaderThreadCount: 1
SAPClient: 800
UserName: GAOMX
Password: xxxxxxxx
Language: EN
ServerName: blade01a.memc.com
PortNumber: 00
BindingKey: XMIIIDOC
And also, following is error message found from LOG VIEWER of the MII server:
here is one
Message: not supported FunctionModule MODEL_VIEW_REPLICATE for IDocActivationSpec
Date: 2011-07-21
Time: 15:30:18:060
Category: /System/Server/Connector/Rfc
Location: com.sap.mw.jco.jra
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
and another one
Message: Server repository could not create function template for 'MODEL_VIEW_REPLICATE' caused by: java.lang.RuntimeException: not supported FunctionModule MODEL_VIEW_REPLICATE used with IDocActivationSpec registered for MII_IDOC_CONNECT_5 on system blade04a_MIT_00
Date: 2011-07-21
Time: 15:30:18:061
Category: /System/Server/Connector/Rfc
Location: com.sap.conn.jco
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
Thanks,
Mike

Error sending IDOC from external Java application to Sap ERP system

Hi Experts!
When I try to send Idoc from Java application to XI an error occurs : no service for system CLNTJAVA, client in Integration Server.
My question is: What value the setSenderPort() is excepting?The Java third party business system's logical name or the ERP business system's logical name where the JCO can be found?I tried both of them, but still have the problem.
Please help. I read all threads about this error, but non of those can help me.
My relevant java sourcecode:
doc.setSenderPort("CLNTJAVA");
The XI documentation says that:In the case of non-SAP senders, the entry in the SNDPOR field is interpreted as a logical system name, and the corresponding business system is searched for in the runtime cache.
Both case(third party business sytem and erp business system) I have configured the ID i think correctly. I made a business systems,I configured the adapter specific identifies,I made the IDX1 port,I made the RFC destination,I polled the IDOC type with IDX2 transaction, I have made full cache refresh,I configured the INTEGRATION_DIRECTORY_HMI rfc destination,but I do not made any communication channels, receiver determinations, receiver agreement.
My configurations if it can help for you.
Hostname:sapsp5
System name: NE2
Clients:
000 ERP
001 Integration Server
SLD configurations:
Third Party Technical system name: Java_sytem
Business System:CLNTJAVA
Logical system name: CLNTJAVA
ID configurations:
Business System:CLNTJAVA
adapter-specific identifiers:logical system:CLNTJAVA, the rest is initial,because I cant change it.
IDX1 port name: CLNTJAVA the client is 001. the rfc destination is client_001.
I think the IDX1 port and the adapter specific identifiers are wrong. is it?
my java source if the sender is the JCO
doc.setSenderPort("INTSERV");
My configurations if the sender is the JCO.
SLD configurations:
Technical system name: NE2
Business System:INTEGRATION_SERVER_NE2
Logical system name: INTSERV
ID configurations:
Business System:INTEGRATION_SERVER_NE2
adapter-specific identifiers:logical system:INTSERV,system NE2,client 001.
IDX1 port name: INTSERV the client is 001. the rfc destination is client_001.
Could this error be an autorization error?I tired to connect to the xi from the Java, with the user PIISUSER extended with PISUPER roles.
Thank very much.

Hi!
My SNDPOR already set to my source business system's logical name if you check my configurations(JAVACLNT), so there is another problem unfortunately. I set SNDPRN to JAVA, but it still does not work.
Check this configuration please(posted here:
No service for system ... in Integration Directory)
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
I guess that your idx1 port name is the same as the SNDPOR value. I think it should be, because the XI is whatching the IDOC traffic in the idoc adapter port, so you should send the IDOC from external system to the adapter port. Is it right?
My idx1 port is the same as my SNDPOR value in Java,but still came the error.

Error when generating IDoc from MC document - workitem to all the SAP users

A workflow item with the subject of Error when generating IDoc from MC document is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
Please check this link for
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
Reward points if useful and close thread if resolved

Error While sending infopackages from OLTP to BI/urgent

Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath k

while loading data into the target we got this message and the solution is do manual update for that.

Error in Sending IDoc to XI

Hi Gurus,
We are not being able to send Idocs from one of our Back-end SAP system. The Idoc status in we05 is successful but it doesn't reach XI. So we checked in SM58 in the Back-end R/3 system and there it shows the error:
No Service For System SAP*** , Client *** in Integration Directory
We tried almost every possible setup
-The System is defined in SLD and has the logical system name.
-The Adapter Specific Identifiers are correct for the corresponding business system in ID
-The RFC destination in R/3 system is defined.
- Read through other similar threads in SDN about the similar problem.
Do anyone have a more definite solution for this particular problem? The other R/3 systems are connected to XI system and all IDocs from those systems are arriving at XI.
Waiting for your valuable advices!
Regards,
Suddha

Hi All,
We had eventually found the solution to this problem we were facing in sending IDoc, though I couldn't manage to update the thread with the solution. I think this would be a very helpful information for those who face similar problems.
Let me describe the scenario first briefly,
We are sending an IDoc (Idoc extension), from SAP system to XI and then send the XML payload as mail attachment to the receiver via receiver mail adapter. Since this is a cross company transaction, hence we have configured the scenario as a B2B in ID, which means we use Parties for both the sender and receiver.
Now in the ID we had done all necessary configurations and used parties and services under Party. For the sender SAP system we assigned a Business System to Sender Partner, configured the Party Alternative Identifiers correctly. The ports were created in IDX1.
On the other hand the SAP system was also configured successfully - including Partner Profile, Distribution List, RFC destinations and ports.
In SLD we created Business System for the SAP system and in ID the Business System under party had the correct logical system name as Adapter Specific Identifiers.
But after all these, the IDoc was not arriving at XI, though in R/3 the status of the IDoc was 03 in we02. When we checked in sm58 in R/3, it showed us the error message that "No Service For System SAP*** , Client *** in Integration Directory".
The cause to this problem was:
We created (assigned from SLD) Business System only under Party (Sender), as this was a B2B scenario, and didn't create (assign) a Business System without Party, as we didn't need one at all in the scenario configuration. And this the reason behind this error. When an Idoc arrives at XI, before the Inbound IDoc adapter converts the IDoc to IDoc XML using IDoc metadata............it checks in Configuarion to see if any Service without Party (Busniess System) is defined for the Sender SAP System and Client (The SNDPOR and MANDT field values from IDoc Control header are taken as the SAP SID and Client). If it finds one it accepts the IDoc and starts the Normalization (Sender Party, Service......in the message header) and IDoc to XML conversion. If it cannot find an Service without Party in ID for sender system, it rejects the Idoc with the error message that we saw in sm58 in backend R/3 system.
In this step the Service under Party doesn't help, because at this point the Inbound IDoc adapter can not deterimine the sender party.
Hence for sending an IDoc from an SAP system to XI, we need to have an Service Without Party in ID, whether or not we require it in our actual Scenario Configuration, which is ofcourse not a case for the Reverse Scenario, ie Sending an IDoc into SAP system from XI.
This is the similar with BC adapter as well. I was already aware about this behaviour of BC adapter from my past experience and this actually helped to troubleshoot this IDoc adapter problem.
This was ofcourse a useful and new learning for me and hope would be helpful to others as well. Let me know if anyone has any doubts on this.
Regards,
Suddha
Edited by: Suddhasatta Guha on Aug 28, 2008 1:03 PM

Issue in sending IDOC from BODS to SAP

I am getting issue while sending IDOC from BODS to SAP.
Job is getting failed with error : "No authorization to send Idoc with message type CREMAS"
I have checked last authorization in SU53 and it is Successful !!
What would be reason because of which job is getting failed with Authorization error?

Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
if you need more information refer this document:
How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

Company code does not exist error while sending idoc

Hi Expert
I am trying to send idoc from one client(800) to another client(810).I have faced error Company code does not exist, searched scn ,Got solution if company code does not exist in reciever system(810 client) ,it will show this error .Then i have tried to give specific company code which is exist in 810 client also .But same issue is coming . So what exactly the issue can any one say .
More Info:FI(Finance) header items and line items are sending .
Thanks & Regards

Hi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

Error during sending IDoc from XI to R/3

Similar Messages

Maybe you are looking for