Error during usage decision for Test Equipment

Hi,
I have completed results recording for Test Equipment using QE51N (results closed and confirmation completed). When I tried to make usage decision (QA11) for the lot the pop-up message shows as "Not all equipment is valuated! Do you want to force inspection completion. I also noticed that in equipment tab of qa11 code valuation column shows as Not Valuated.
I request you to help me to solve this problem.
Thanks & Regards
V.Devaraj

HI,
You may try changing the valuation mode in IA06. In the inspection characteristic overivew, click on details -> operation, scroll down, you will find Quality management inspection points -> maintain automatic valuation based on inspection points.
The changes if made will be effective only for the next inspeciton lots.
Regards,
M.M

Similar Messages

Error while result recording for test equipment

Dear Gurus
My scenario is to do unplanned maintenance for test equipment and recording the result.
For that I have done the following steps
1)     Created Notification for the test equipment (customized notification type TE).
2)     For that notification I created order. (customized order type TE01).
3)     Attached General maintenance task list for that order. Task list has inspection point 300.
4)     Released the order and saved. Inspection Lot is created.
5)     In QE51N / QA32 when I tried to do results recording, it shows the following error.
"Equipment VERN01 do not exist in the object list for order 4001214"
Please help me to correct this error.
Regards
Babu R

Hi
I applied oss and today I got reply. When 1278254 notes is implemented it is solved.
I have one more question, now in QE51N, I did result recording and when saved it is asking for order confirmation, I have given all data and came back to the same screen. There is one more option for Valuate Inspection Point. In that I have selected Can be used option and saved. Now if I goto maintenance order and TECO the order, it is saying that A usage decision has stll to be made.
Whether I want to take UD once again in QA32 ?
Also is there any settings to TECO the notification automatically when the maintenance order is TECO'ed. Now the notification is not TECO'ed when order is TECO'ed.
Babu R

Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

Error during Usage decision

Hi,
System status is not updating in the transaction QA32.We find that system status is not updating from certain period earlier which is fine.
Another thing is We are not able to clear the inspection lots through UD in QA32.If we try to do the UD in QA32 we are getting the error operation QM20 not available for this lot message QV224.
If we try to view the inspection lot we are getting the error No status object is available for INL 80000000328
Message no. BS001.
At the time when system status is updating fine we are able to do these things.Is system status is the reason for this?
Please help us on the above mentioned problems.
Thanks & Regards,
Rajesh

hi,
i think none of the lot result is recorded.
QAC3 & QA02 can help you to create.
please check and confirm.
balajia

QA40 making usage decision for 03 lots with rejected MIC also

Hi Friends ,
QA40 is making Usage decision for 03 type lots having defects also and also for the lost having rejected MICs . can anybody explain why its so because SAP help has mentioned that for automatic UD there should be no rejected MIC .
Regards

What you are thinking about is QA10, not QA40.
QA40's criteria for making the UD is based upon the order status. I.e. the three radio buttons in the screen, orders completed, technically complete and confirmed.
The idea is once one of these statuses is reached, you wouldn't have any more testing. Also, it is not unusual to have out of spec results during in-process testing. In many industries that would be the norm, not the exception as often times a step in the process has a test repeatedly perform until a certain result is achieved. % water or % solids for instance.
03 lots also do not control stock. So it's not as critical that tests be in spec at this point to perform the UD.
Craig

No Automatic Transfer order creation upon usage decision for 553 mtype

Scenario: We have quality and warehouse management active. Goods receipt is done against a purchase order. Stock comes into 902 storage type under stock category u201CQu201D. From 902 storage type, Goods issue to scrapping under quality( using IM movement type 553 ) is done using QA11. Normally, once GI to scrap under quality is done at IM level, WM movement type 551 gets triggered automatically in the background which creates a transfer order to move stock from 902 to 999 storage type under u201CQu201D stock category.
Problem: System unable to find storage bin for storage type 902 Q.
In our system, automatic TO creation from TR isnu2019t happening once the usage decision for 553 movement type happens. The TO creation process couldnu2019t recognize the stock which is available as u201CQu201D. It throws an error message u201Csource storage bin could not be foundu201D at the time of TO creation from TR. Putaway strategy for the physical storage types is FIXED BIN, MIXED STOCK ALLOWED and ADDITION TO EXISTING STOCK. 902 storage type has ADDITION TO EXISITNG STOCK and MIXED STOCK as a putaway strategy.
We have already activated auto TO creation settings at WM-IM reference movement types interface configuration.
Is there any setting missing at QM-WM interface?
Can someone please tell us a methodology to activate this transfer order creation process (WM mtype 551) for 553 IM mtype ?
Thanks in advance. Please reply.
Regards
Preetinder Singh
Phone: 404-468-8422

Hello,
I do not understand your scenario , u are saying are posting inspection lot to non WM storage location and again saying system can not find bin automatically.
"A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
The system cannot find the storage bin automatically.
Thank you in advance!"
Please let me know are u using quality interim storage area. If you clear material from quality and want material to go to bin then it should be warehouse managed storage location.
Regards,
Prashant

Valuate the non-valuated QM characteristic during usage decision

Hi Guys,
I don't understand why during usage decision, system pops up the following message even though I have force the inspection completion on one particular inspection characteristic.
Valuate the non-valuated QM characteristics manually? Yes button and No button
After hits Yes button, another message appears...
Class characteristic QNNVM1 can be manually evaluated.
There are two inspection characteristics in this inspection lot, and one inspectin characteristic has been record as pass and accepted during result recording, while another inspection characteristic (which is a required characteristic on system setup) did not perform result record. Thus, during QA11, I force this required characteristic to inspection completion.
My questin is why the system gave me "Valuate the non-valuated QM characteristics manually?" message?
Thanks
YY

Plz. tell me whether sampling procedure is used for these characteristics ?
If yes then whether valuation mode is 'valuate manually ' ?

UOM Change during Usage Decision

Hi Gurus,
I am maintaining 2 UOM in the material master .
1) Kg
2 ) Tonne
I am purchasing my material in Tonnes . During Usage decision, I want to post my material in Kg.
I ] Is it possible to make the UOM change during Usage Decision.
II] Is it possible to use same inspection plan for the same UOM, In case of I am recieving the material by Kg or Tonne
Thanks in Advance.
Srinivasan

You cannot normally change the UOM in the UD. You can only use the bas UOM. SAP however does have a note on using alternate UOM in the stock posting. It is not as seamless as you would probably like, but its the best you'll do.
The note is 605861.
I posted part of it below.
Craig
With the import of the assigned Support Package or the implementation of
this note, a Business Add-In is made available with which you can program
an input help for quantities in the usage decision.
For example, this enables you to specify quantities for the stock posting
in an alternative unit of measure in the usage decision. Via a
corresponding BAdI implementation, you can call up a dialog box - in which
you can specify the respective quantity with the required unit - in the
usage decision when you use the input help (F4) for the quantity fields.
However, the quantity is always transferred in base unit of measure to the
stock posting.
The BAdI can only be used for stock-relevant inspection lots. You can only
enter the quantities in other unit of measures manually (explicit call of
the input help).
You can implement new BAdI QEVA_ALT_QTY_INPUT using Transaction SE19.
Take also the documentation on the BAdI into account.
You can transfer the BAdI definition together with the respective
documentation using the assigned Support Package.

Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

Hi,
I am facing the problem in IR .
<b>Internal error during bean lookup for bean RepObjectAccessBean</b>
is the Error window I am getting frequently, After getting this error, It is no allowing to open any of the IR Objects.
Thanks in advance,
Dhanabal T

Hi Dhanabal,
i got the same error. But it is clear.
Please chek once ur configuration part. The error is in configuration part only.
once check all the steps in ur configuration part.
REgards,
chandra.

Changing posting date at usage decision for handle units. How?

Does anybody know how to change posting date at usage decision for handle units (HU)?
If the material is not managed by HU, SAP allows this modification (there's a button with a hat on it referring the material document header).
For HU I cannot seem to change posting date!
Seba

Yes it's possible! Well,...unless for versions 4.6C, 4.7 and ECC 5.
I've found SAP Note #752131 by which SAP declares that you can create the pushbutton from the Screen Painter referring the document header.
That's all,.....so simple, and it works fine!
This note applies ONLY to version 4.6C, 4.7and ECC 5 (which is the version the customer I am with has installed).
Thanks anyway.
Sebas

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

In DP50 Error during material determination for service order

Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
Mohit

Hi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam

Error during availability check for order

Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM Consultant

Hi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Error during in-app purchase testing download

Hello,
I've done an in-app with my Viewer Builder v 1.5 and I created the Product ID and all the necessary informations at my iTunes Connect Account. However, when I test the purchase in my iPad with a test account, the box "ERROR DURING PURCHASE - Please try again later" appears.
All the other tests, like single folio and multi-folio free issues, it's ok to me.
Someone at the same point?
Regards,
Filipe Speck

Bob,
answering your questions:
- Did you use the same Product ID when creating the in-app purchase and publishing the folio?
Yes, I'm using the same Product ID. So, after publishing the folio, it appears at my in-app test.
- Are the retail folios set as public?
If I publish a free issue, I can test the download. The problem is when I set it as retail. The issue and the price appears, but when I try to make the purchase, after I confirm my purchase with an Apple test user, with the [Environment: Sandbox], it says: "ERROR DURING PURCHASE - Please try again later"
- Are your in-app purchases cleared for sale?
I think so. When I published, I've set as Public, Retail and the same Product ID I used at iTunnes Connect. So, when I'm testing at my in-app, the folio appears. Is there any other place I have to go?
Regards,
Filipe.

Error during usage decision for Test Equipment

Similar Messages

Maybe you are looking for