Error during VM container communication between ABAB and Java

Hi All
Once in a while we get this error while creating shopping cart.
'Error during VM container communication between ABAB and Java"
Why ?  only one user has thos problem
SAP SRM 5 .0
what could be the reason ?
It is not happening always.
any help /reason for this error is appreciated?
br
muthu

Hi,
Please check the below link :
/message/6055324#6055324 [original link is broken]
i hope this will help you..
With Regards,
  CSK

Similar Messages

  • Short dump Error during VM container communication between ABAP and JAVA.

    Hello All,
    Can anybody please help with resolving the following issue:
    Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
    When I try to insert ECC migrated material, everything works fine.
    Here is the details of dump:
    Short text
        Error during VM container communication between ABAP and JAVA
    Information on where terminated
        Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
        The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
    Thank you!

    hi Willie,
         this is the dump, and i have used the t-code sm52 . the VMC is not active.
    |Short Text                                                                                        |
    |    Error during VM Container communication between ABAP and JAVA.                                |
    |What happened?                                                                                    |
    |    The current program had to be terminated because of an                                        |
    |    error when installing the R/3 System.                                                         |
    |    Error in the RFC layer.                                                                       |
    |What can you do?                                                                                  |
    |    Note which actions and entries caused the error to occur.                                     |
    |                                                                                                  |
    |    Consult your SAP administrator.                                                               |
    |                                                                                                  |
    |    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
    |    and retain termination messages for longer periods.                                           |
    |Error analysis                                                                                    |
    |    An error has occurred in the RFC layer during communication between                           |
    |    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
    |    between the two stacks.                                                                       |
    |                                                                                                  |
    |    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
    |    Return code = -1007                                                                           |
    |    Pointer    = "000007DD348F6138"                                                               |
    |How to correct the error                                                                          |
    |    Check whether the VMC is active on your application server. To do this,                       |
    |    run transaction SM52. If the VMC is not active, contact your SAP                              |
    |    administrator.                                                                                |
    Regards
    Charles

  • Error during VM container communication between ABAP and JAVA

    Hello,
    While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
    Based on earlier responses in this forum, I checked following activity.
    1. T Code - BBP_CND_CHECK_CUST
    Result - IPC Pricing is Active and IPC is now running in VMC
    2. Run Report - RSVMCRT_HEALTH_CHECK
    Result - The Java component is deactivated
    3. As per OSS note 854170, Profile parameters were existed as below
    a) vmcj/enable - on
    b) vmcj/option/maxJavaHeap = 200M
    So, How to get Java component activated?
    Thanks,
    Rahul Mandale

    Thanks Markus,
    For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
    Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
    and dev_w0 trace ....
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Wed Aug 31 15:45:40 2011
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
    B  New connection 0 created
    M sysno      04
    M sid        CUS
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    52
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        456
    M
    M  kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c   1293]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          18304     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1452)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
    M  DpShMCreate: allocated sys_adm at 05C00040
    M  DpShMCreate: allocated wp_adm at 05C01E28
    M  DpShMCreate: allocated tm_adm_list at 05C065A8
    M  DpShMCreate: allocated tm_adm at 05C065D8
    M  DpShMCreate: allocated wp_ca_adm at 05FCBB70
    M  DpShMCreate: allocated appc_ca_adm at 05FD1930
    M  DpShMCreate: allocated comm_adm at 05FD3870
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06054730
    M  DpShMCreate: allocated gw_adm at 06054770
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 060547A0
    M  DpShMCreate: allocated wall_adm at 060547A8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Wed Aug 31 15:45:41 2011
    M  ThInit: running on host crmsys
    M 
    M Wed Aug 31 15:45:42 2011
    M  calling db_connect ...
    C  Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
    C 
    C Wed Aug 31 15:45:47 2011
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
    C  Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
    C  Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
    C 
    C Wed Aug 31 15:45:48 2011
    C  Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
    C  Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
    C  Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
    B 
    B Wed Aug 31 15:45:49 2011
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20110831 154542 CRMSYS         
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Wed Aug 31 15:46:12 2011
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0A7C0040, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
    M  SHM_PAGING_AREA          (addr: 0AC00040, size: 32768000)
    M  SHM_ROLL_ADM               (addr: 0CB50040, size: 615040)
    M  SHM_PAGING_ADM          (addr: 0CBF0040, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0CC80040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 0CD10040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 10E700C8, size: 30000000, end: 12B0C448)
    B  dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
    B  dbexpbuf: Buffer ESM   (addr: 134E00D0, size: 4194304, end: 138E00D0)
    B  dbexpbuf: Buffer CUA   (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
    B  dbexpbuf: Buffer OTR   (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S 
    S Wed Aug 31 15:46:15 2011
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 1946AA80
    S 
    S Wed Aug 31 15:46:16 2011
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 1D6D00A8
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 1D6D0430
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2132 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A Wed Aug 31 15:46:18 2011
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 73 MB, reducing # of fragments
    A  System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
    A  Attached to PXA (address 688A0040, size 150000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A 
    A Wed Aug 31 15:46:20 2011
    A  ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
    A  >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
    A  >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
    A  RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
    A 
    A Wed Aug 31 15:46:21 2011
    A  RFC Options> H=crmsys,S=04,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 13730 bytes at 0FFB0040
    N 
    N Wed Aug 31 15:46:22 2011
    N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N 
    N Wed Aug 31 15:46:23 2011
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
    B     max_blocking_factor =  15,  max_in_blocking_factor      =   5,
    B     min_blocking_factor =  10,  min_in_blocking_factor      =   5,
    B     prefer_union_all    =   0,  prefer_join                 =   0,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B     convert AVG         =   0,  alias table FUPD            =   0,
    B     escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x0f,  character encoding          = STD / <none>:-,
    B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W 
    W Wed Aug 31 15:46:24 2011
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.52.20050900]
    W    ITS Plugin: Int.version, [32]
    W    ITS Plugin: Feature set: [10]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    B 
    B Wed Aug 31 15:46:48 2011
    B  table logging switched off for all clients
    M 
    M Wed Aug 31 15:47:55 2011
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
    A 
    A Wed Aug 31 15:48:44 2011
    A  RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
    B 
    B Wed Aug 31 15:49:47 2011
    B  dbmyclu : info : my major identification is 3232288873, minor one 4.
    B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
    B  dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
    B  dbmyclu : info : current optimistic cluster level: 0
    B  dbmyclu : info : pessimistic reads set to 2.

  • COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET: US$20 AWARD FOR SOLUTION!

    COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET PROBLEM (Easy Filter Java Applet) -
    US$20 TO ANYONE WHO CAN RESOLVE THE PROBLEM
    To forum visitors:
    I am prepared to pay a standard shareware fee of US$20 to a user who can resolve this technical problem.
    If your advice resolves the problem, I'll forward the payment to your postal address (include your
    address with your reply, and also your email address)
    I am attempting to enable a HTML button (using Javascript's onClick command) to directly input a number into one of the parameter text boxes in the Easy Filter Java applet (ie, enter a new color value number in the text field of the standard Colors Multiplicator Filter interface).
    The applet is Freeware and can be downloaded at: http://www.javazoom.net/applets/easyfilter10/EasyFilter10.html
    (It is a very effective bitmap display and editing utility)
    To achieve this, I am trying to access the part of the applet that defines and sets the textbox. The text box is defined in the .class file by accessing the parameter details in the genericfilter.txt file (accompanies the .class files). I need to access 'private String appletInitialize()' and then one of the 'textFieldParameters' which sets the textbox.
    I understand the basic syntax for referencing the applet:
    document.appletname.setString("An example"). However, accessing the text fields in this applet is more complex!!
    Please can you recommend the correct Javascript syntax to achieve communication with the applet.
    Thank you for your kind assistance.
    JM Graham
    [email protected]
    The Java source code for the applet: EasyFilter.class
    # Easy Filter - E.B/JavaZOOM 1999 #
    # Contact: [email protected] #
    # http://javazoom.hypermart.net #
    /* Originally compiled from EasyFilter.java */
    import java.awt.*;
    import java.io.*;
    import java.net.*;
    import java.applet.Applet;
    import java.awt.event.KeyEvent;
    import java.awt.event.KeyListener;
    import java.awt.image.MemoryImageSource;
    import java.awt.image.PixelGrabber;
    import java.util.Vector;
    public synchronized class EasyFilter extends Applet implements KeyListener
    private String paramFileName;
    private Color bgColor;
    private Color fgColor;
    private Color parColor;
    private Color sepColor;
    private Color titleColor;
    private Color helpColor;
    private int WinWidth;
    private int WinHeight;
    private String title;
    private String logoFileName;
    private String originalImageFileName;
    private String filteredCaption;
    private String originalCaption;
    private Vector paramsName;
    private Vector paramsValue;
    private Vector paramsComment;
    private Panel panelParameters[];
    private Label labelParameters[];
    private TextField textFieldParameters[];
    private Label labelComments[];
    private int nbParameters;
    private ScrollPane scrollPaneParams;
    private Panel panelParams;
    private Image theLogo;
    private Image theOriginalImage;
    private Image theFilteredImage;
    private int theOriginalPixelArray[];
    private int logoWidth;
    private int logoHeight;
    private int imageWidth;
    private int imageHeight;
    private drawCanvas canvasTitle;
    private Panel panelTitle;
    private Label labelTitle;
    private Panel panelImages;
    private Panel panelOriginalImage;
    private drawCanvas canvasOriginalImage;
    private Label labelOriginalImage;
    private Panel panelFilteredImage;
    private drawCanvas canvasFilteredImage;
    private Label labelFilteredImage;
    private Panel panelHelp;
    private Label labelHelp;
    private int Yspc;
    private FilterImplementation theFilter;
    public void init()
    String string = null;
    string = appletInitialize();
    setBackground(bgColor);
    if (string != null)
    removeAll();
    setBackground(Color.white);
    setForeground(Color.black);
    Label label = new Label(new StringBuffer("Error: ").append(string).toString(), 1);
    Panel panel = new Panel();
    panel.add(label);
    add(panel);
    setLayout(new FlowLayout(1, 5, Yspc));
    public void keyPressed(KeyEvent keyEvent)
    panelHelp.removeAll();
    boolean flag = true;
    if (KeyEvent.getKeyText(keyEvent.getKeyCode()).equals("Enter"))
    for (int i = 0; i < nbParameters; )
    try
    paramsValue.setElementAt(new Double(textFieldParameters.getText()), i);
    i++;
    catch (NumberFormatException e)
    labelHelp.setText(labelParameters[i].getText() + ": Not a Number");
    flag = false;
    break;
    if (flag == 1)
    labelHelp.setText(" .... Running, please wait .... ");
    labelHelp.setAlignment(1);
    panelHelp.add(labelHelp);
    panelHelp.doLayout();
    theFilter.updateParameters(paramsValue);
    theFilter.computeFilter();
    theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
    canvasFilteredImage.setImage(theFilteredImage);
    canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
    canvasFilteredImage.repaint();
    panelHelp.removeAll();
    labelHelp.setText("- Done -");
    else
    labelHelp.setText("- Press Enter to run the Filter -");
    labelHelp.setAlignment(1);
    panelHelp.add(labelHelp);
    panelHelp.doLayout();
    public void keyReleased(KeyEvent keyEvent)
    public void keyTyped(KeyEvent keyEvent)
    private String appletInitialize()
    WinWidth = size().width;
    WinHeight = size().height;
    if (getParameter("bgcolor") == null)
    bgColor = new Color(0, 0, 40);
    else
    bgColor = new Color(Integer.parseInt(getParameter("bgcolor"), 16));
    if (getParameter("fgcolor") == null)
    fgColor = new Color(255, 255, 255);
    else
    fgColor = new Color(Integer.parseInt(getParameter("fgcolor"), 16));
    if (getParameter("sepcolor") == null)
    sepColor = new Color(158, 128, 128);
    else
    sepColor = new Color(Integer.parseInt(getParameter("sepcolor"), 16));
    if (getParameter("parcolor") == null)
    parColor = new Color(24, 24, 24);
    else
    parColor = new Color(Integer.parseInt(getParameter("parcolor"), 16));
    if (getParameter("titlecolor") == null)
    titleColor = new Color(255, 255, 0);
    else
    titleColor = new Color(Integer.parseInt(getParameter("titlecolor"), 16));
    if (getParameter("helpcolor") == null)
    helpColor = new Color(0, 255, 255);
    else
    helpColor = new Color(Integer.parseInt(getParameter("helpcolor"), 16));
    paramsName = new Vector();
    paramsValue = new Vector();
    paramsComment = new Vector();
    paramFileName = getParameter("paramfile");
    String string = readParams(paramFileName);
    if (string != null)
    return string;
    MediaTracker mediaTracker = new MediaTracker(this);
    theOriginalImage = getImage(getDocumentBase(), originalImageFileName);
    mediaTracker.addImage(theOriginalImage, 0);
    if (logoFileName != null)
    theLogo = getImage(getDocumentBase(), logoFileName);
    mediaTracker.addImage(theLogo, 1);
    try
    mediaTracker.waitForAll();
    catch (InterruptedException e1)
    return "Error while loading image";
    if (mediaTracker.isErrorAny())
    return "Error while loading image";
    if (logoFileName != null)
    logoWidth = theLogo.getWidth(this);
    logoHeight = theLogo.getHeight(this);
    imageWidth = theOriginalImage.getWidth(this);
    imageHeight = theOriginalImage.getHeight(this);
    theOriginalPixelArray = new int[imageWidth * imageHeight];
    PixelGrabber pixelGrabber = new PixelGrabber(theOriginalImage, 0, 0, imageWidth, imageHeight, theOriginalPixelArray, 0, imageWidth);
    try
    pixelGrabber.grabPixels();
    panelTitle = new Panel();
    canvasTitle = new drawCanvas();
    labelTitle = new Label();
    panelTitle.setLayout(new FlowLayout(1, 10, Yspc));
    add(panelTitle);
    panelTitle.setBackground(bgColor);
    panelTitle.add(canvasTitle);
    canvasTitle.setImage(theLogo);
    canvasTitle.setBounds(0, 0, logoWidth, logoHeight);
    labelTitle.setText(title);
    catch (InterruptedException e2)
    return "Internal Error, Try RELOAD !";
    if (title != null)
    panelTitle.add(labelTitle);
    labelTitle.setForeground(titleColor);
    labelTitle.setFont(new Font("Dialog", 1, 14));
    panelImages = new Panel();
    panelOriginalImage = new Panel();
    canvasOriginalImage = new drawCanvas();
    labelOriginalImage = new Label();
    panelFilteredImage = new Panel();
    canvasFilteredImage = new drawCanvas();
    labelFilteredImage = new Label();
    panelImages.setLayout(new FlowLayout(1, 10, Yspc));
    add(panelImages);
    panelImages.setBackground(bgColor);
    panelOriginalImage.setLayout(new BorderLayout(0, 2));
    panelImages.add(panelOriginalImage);
    panelOriginalImage.setBackground(Color.black);
    panelOriginalImage.add("Center", canvasOriginalImage);
    canvasOriginalImage.setImage(theOriginalImage);
    canvasOriginalImage.setBounds(0, 0, imageWidth, imageHeight);
    labelOriginalImage.setText(originalCaption);
    labelOriginalImage.setAlignment(1);
    panelOriginalImage.add("South", labelOriginalImage);
    labelOriginalImage.setBackground(Color.lightGray);
    labelOriginalImage.setForeground(Color.black);
    labelOriginalImage.setFont(new Font("SansSerif", 0, 10));
    panelFilteredImage.setLayout(new BorderLayout(0, 2));
    panelImages.add(panelFilteredImage);
    panelFilteredImage.setBackground(Color.black);
    panelFilteredImage.add("Center", canvasFilteredImage);
    theFilter = new FilterImplementation(paramsValue, theOriginalPixelArray, imageWidth, imageHeight);
    theFilter.computeFilter();
    theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
    canvasFilteredImage.setImage(theFilteredImage);
    canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
    labelFilteredImage.setText(filteredCaption);
    labelFilteredImage.setAlignment(1);
    panelFilteredImage.add("South", labelFilteredImage);
    labelFilteredImage.setBackground(Color.lightGray);
    labelFilteredImage.setFont(new Font("SansSerif", 0, 10));
    scrollPaneParams = new ScrollPane(0);
    panelParams = new Panel();
    nbParameters = paramsName.size();
    int i = WinHeight - (33 + 7 * Yspc + logoHeight + imageHeight + 23);
    if (i < Yspc + 2 + 24)
    i = Yspc + 2 + 24;
    scrollPaneParams.setBounds(0, 0, WinWidth - 10, i);
    panelParams.setLayout(new GridLayout(nbParameters, 1, 5, Yspc / 2));
    scrollPaneParams.add(panelParams);
    panelParams.setBackground(sepColor);
    panelParameters = new Panel[nbParameters];
    labelParameters = new Label[nbParameters];
    textFieldParameters = new TextField[nbParameters];
    labelComments = new Label[nbParameters];
    for (int j = 0; j < nbParameters; j++)
    panelParameters[j] = new Panel();
    panelParameters[j].setLayout(new FlowLayout(0, 5, 1));
    panelParams.add(panelParameters[j]);
    panelParameters[j].setBackground(parColor);
    labelParameters[j] = new Label();
    labelParameters[j].setText((String)paramsName.elementAt(j));
    panelParameters[j].add(labelParameters[j]);
    labelParameters[j].setForeground(fgColor);
    labelParameters[j].setFont(new Font("Dialog", 1, 12));
    textFieldParameters[j] = new TextField(8);
    textFieldParameters[j].setText(paramsValue.elementAt(j).toString());
    panelParameters[j].add(textFieldParameters[j]);
    textFieldParameters[j].setBackground(fgColor);
    textFieldParameters[j].addKeyListener(this);
    labelComments[j] = new Label();
    labelComments[j].setText((String)paramsComment.elementAt(j));
    panelParameters[j].add(labelComments[j]);
    labelComments[j].setForeground(fgColor);
    add(scrollPaneParams);
    panelHelp = new Panel();
    labelHelp = new Label();
    panelHelp.setLayout(new FlowLayout(1, 5, 0));
    add(panelHelp);
    panelHelp.setBackground(bgColor);
    labelHelp.setText(" Change colour values and press enter ");
    labelHelp.setAlignment(1);
    panelHelp.add(labelHelp);
    labelHelp.setForeground(helpColor);
    return null;
    private String readParams(String string1)
    Object object1;
    String string2;
    if (string1 == null)
    return "Filename of filter's parameters needed";
    try
    URL uRL = new URL(getDocumentBase(), string1);
    URLConnection uRLConnection = uRL.openConnection();
    uRLConnection.setDoInput(true);
    uRLConnection.setUseCaches(false);
    BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(uRLConnection.getInputStream()));
    string2 = null;
    catch ()
    return object1.getMessage();
    catch ()
    return object1.getMessage();
    catch ()
    return object1.getMessage();
    if (bufferedReader != null)
    Object object2;
    try
    for (object2 = bufferedReader.readLine(); object2 != null && string2 == null; object2 = bufferedReader.readLine())
    string2 = extractFormat(object2);
    catch ()
    string2 = object2.getMessage();
    finally
    bufferedReader.close();
    if (string2 != null)
    return string2;
    else
    return null;
    private String extractFormat(String string1)
    if (string1.length() == 0)
    return null;
    int i = 0;
    int j = string1.indexOf(" ", i);
    if (j == -1)
    return "Bad format error (space missing)";
    String string2 = string1.substring(i, j);
    if (string2.equals("TITLE"))
    i = j;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in TITLE missing)";
    i = j + 1;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in TITLE missing)";
    title = string1.substring(i, j);
    return null;
    if (string2.equals("ORIGINALCAPTION"))
    i = j;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in ORIGINALCAPTION missing)";
    i = j + 1;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in ORIGINALCAPTION missing)";
    originalCaption = string1.substring(i, j);
    return null;
    if (string2.equals("FILTEREDCAPTION"))
    i = j;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in FILTEREDCAPTION missing)";
    i = j + 1;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in FILTEREDCAPTION missing)";
    filteredCaption = string1.substring(i, j);
    return null;
    if (string2.equals("LOGO"))
    i = j + 1;
    j = string1.length();
    logoFileName = string1.substring(i, j);
    return null;
    if (string2.equals("ORIGINALIMAGE"))
    i = j + 1;
    j = string1.length();
    originalImageFileName = string1.substring(i, j);
    return null;
    if (!string2.equals("PARAM"))
    return null;
    i = j;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format in a PARAM line";
    i = j + 1;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format in a PARAM line";
    paramsName.addElement(string1.substring(i, j));
    i = j + 2;
    j = string1.indexOf(32, i);
    if (j == -1)
    return "Bad format in a PARAM line";
    try
    paramsValue.addElement(new Double(string1.substring(i, j)));
    j = string1.indexOf(34, i);
    catch (NumberFormatException e)
    return "Bad format in a PARAM line";
    if (j == -1)
    return "Bad format (Double quote in PARAM comment missing)";
    i = j + 1;
    j = string1.indexOf(34, i);
    if (j == -1)
    return "Bad format (Double quote in PARAM comment missing)";
    paramsComment.addElement(string1.substring(i, j));
    return null;
    public EasyFilter()
    logoHeight = 33;
    Yspc = 5;

    Addition to my above submission
    To clarify, I'll offer the US$20 to the FIRST person who offers me a workable solution to the problem, not to everyone!!!
    JMGRAHAM

  • Communication between Abap and Java and Java to Abap

    HI,
    I have installed BI 7.0 and the user complaints that BEx WEB Application Designer Query results are not showing up in the WEB URL Link.
    and the BI user suggests that communication between Abap to java and Java to Abap has to be done?
    How to setup ABAP to JAVA and JAVA to ABAP communication?
    Regards,
    Magham.

    Hi,
    Jco conn from ABAP to Java
    =====================
    You can use the JCO RFC Provider Service of the Web Application Server for your ABAP to Java calls.
    The steps involved in that are
    1. Configure destination in SM59 in SAP.
    2. Create RFC Destination in Visual Admin.
    3. Create a stateless session bean with JNDI name as the name of calling function module in SAP.
    4. Add a business method public void processFunction(JCO.Funtion fn) which is called by the JCO RFC Provider Service. The name should be 'processFunction'.
    5. Set library references in application-j2ee-engine.xml to type weak for the following
    a. com.sap.mw.jco.
    b. com.sap.tc.Logging (if you are using the logging api )
    Here is the sample code for the EJB biz method
    Business Method.
    public void processFunction(JCO.Function function) {
    try {
    // Get the import parameters for the function module
    JCO.ParameterList importList = function.getImportParameterList();
    logger.infoT("The value sent is" +
    (String)importList.getValue("USER_NAME"));
    // Set the export parameter value for the function module
    JCO.ParameterList export = function.getExportParameterList();
    export.setValue("From EJB", "RETURN");
    function.setExportParameterList(export);
    catch (java.lang.Exception e) {
    e.printStackTrace();
    Jco conn from Java to others(ex:ABAP)
    =====================-==========
    • Open Visual Admin(C:\usr\sap\SID\JCxx\j2ee\admin\go.bat) and connect to server
    • Go to Destinations service
    • Open HTTP Settings Tab
    • Add/Edit destination SLD_DataSupplier and type following values
    URL – http://xyz.corp:53000
    Authentication - BASIC
    User – dynproxxx
    Password - bp52st000
    • Press save and test (if you get response code 200 everything is o.k.)
    • Add/Edit other HTTP Destination named SLD_Client with the same values as SLD_DataSupplier:
    URL – http://xyz.corp:53000
    Authentication - BASIC
    User – dynproxxx
    Password - bp52st000
    • Press save and test (if you get response code 200 everything is o.k.)
    • Go to SLD Data Supplier service.
    • Press the button named: Send the Data to SLD and confirm triggering SLD Data transfer (if you receive successful message everything is o.k.).
    ===================
    following blog might helpfull
    =======================
    /people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
    for basic infor
    ==============
    http://help.sap.com/saphelp_nw04s/helpdata/en/21/84570b3ae14e77b3047c82218974b9/frameset.htm
    Award points if it helps

  • Communication between c++ and java

    Hi all,
    I am developing a client-server system using C++ and Java.
    C++ programs is used for client part while Java program (servlet) is used in server side.
    I want to ask:
    How can I make communication between them?
    Thanks

    Servlets talk with a Web server and a Web Browser. Unless the C++ app is a Java Servlets client or server then you cannot communicate directly through HTTP and JSP with the C++ app.
    Look at RMI, and CORBA. CORBA is a non-Sun made protocol and RMI is a Sun-made protocol. For best results read the information about each method - RMI and CORBA (which go hand-in-hand).

  • Communication between SOAP and java proxy does not work

    Hi Group,
    i want to proceed following scenario:
    SOAP->XI->JavaProxy
    For that i have created of the message interface of a remote function module my java proxy.
    Calling the java proxy with following scenario works successfully:
    RFC->XI->JavaProxy
    Further, i have created in the integration engine(configuration) my wsdl file. In the SAP
    Netwaever Developer Studio, i have made a standalone proxy project, that is consuming the
    web service out of the wsdl file.
    Testing the web service client with following example works fine:
    SOAP->XI->RFC
    But when i try the scenario SOAP->XI->JavaProxy, i get following rmi exception on client side:
    java.rmi.RemoteException: Service call exception; nested exception is:
    java.lang.Exception:  Element 'Z_GPS_PING.Response' not found in response message.
    at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:86)
    at com.demo.test.TT_Pinger.main(TT_Pinger.java:36)
    Caused by: java.lang.Exception:  Element 'Z_GPS_PING.Response' not found in response message.
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.getResponseDocument(MimeHttpBinding.java:942)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1231)
    at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:79)
    ... 1 more
    In the monitoring, the execution of both directions is ok. In the response message, i can see the result of the java proxy.
    Here is the result:
    <ns:Z_GPS_PING.Response xmlns:ns="urn:sap-com:document:sap:rfc:functions">
         <E_RETURNCODE>PINGOK  </E_RETURNCODE>
    </ns:Z_GPS_PING.Response>
    My first thought, was, that i have a problem with the prefix, so i have changed it via xslt transformation into "rfc",
    but it got the same error message.
    Does anyone know, which problem we have here?
    For any hint or suggestion, i would be much obliged.
    Greetings,
    Sigi
    P.S. WAS and Sap Netweave Dev Studio is on patch level 12

    Hi Group,
    the SAP has solved the Problem now.
    The coresponding OSS note is: 862926
    (release date 18.07.05)
    The reason was, that the response payload name wasn't
    "maindocument". For that, the adapter didn't found the payload and returned an emty one.
    Greetings,
    Sigi

  • Internal error in communication between configuration and sales document

    Hi,
    While i am doing VA32 i got this message  plz advise me..
    Internal error in communication between configuration and sales document
    in the form GET_CONFIG_MODE
    bit urgent  issue..
    Regards,
    San Rao.

    Hi
    Pls check the OSS note 836097, which can solve your problem.
    In my experience, I can tell you something
    When configuration is done, the configuration object is stored in VBAP-CUOBJ for the item. For this CUOBJ, you can find the configuration in the tcode CUTABLEINFO or in tables IBIB, IBIN, IBEXTINST, IBINOBS,IBINOWN,IBST,IBSTREF,IBINVALUES.
    If for the order if VBAP-CUOBJ is not available, then it will not be able to get the configuration. The error message in this case is V1 854 of message class V1.
    You can search for some other OSS notes also using this error message and the form name.
    Also refer to 173726, 174333,175372 and 173664

  • JDeveloper Error: White spaces are required between publicId and systemId.

    I'm using JDeveloper 10.1.3.1.0.
    This error is occurring in a BPEL process project.
    With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
    Error: White spaces are required between publicId and systemId.
    I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
    I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
    When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
    Can anyone help me out on this?
    This is the wsdl for the web service, wsademo.wsdl:
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="wsademo"
    targetNamespace="http://localhost:11001/wsademo.wsdl"
    xmlns:tns="http://localhost:11001/wsademo.wsdl"
    xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
    xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
    xmlns:ns="http://localhost:11001/wsademo.wsdl"
    xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
    xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
    xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
    xmlns="http://schemas.xmlsoap.org/wsdl/">
    <types>
    <schema targetNamespace="http://localhost:11001/wsademo.wsdl"
    xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
    xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
    xmlns:ns="http://localhost:11001/wsademo.wsdl"
    xmlns="http://www.w3.org/2001/XMLSchema"
    elementFormDefault="unqualified"
    attributeFormDefault="unqualified">
    <import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <import namespace="http://www.w3.org/2003/05/soap-encoding"/>
    <!-- operation request element -->
    <element name="wsademoResult">
    <complexType>
    <sequence>
    <element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <!-- operation request element -->
    <element name="wsademo">
    <complexType>
    <sequence>
    <element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <!-- operation response element -->
    <element name="wsademoResult">
    <complexType>
    <sequence>
    <element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    </schema>
    </types>
    <message name="wsademoResult">
    <part name="parameters" element="ns:wsademoResult"/>
    </message>
    <message name="wsademo">
    <part name="parameters" element="ns:wsademo"/>
    </message>
    <message name="wsademoResult">
    <part name="parameters" element="ns:wsademoResult"/>
    </message>
    <message name="wsademoHeader">
    <part name="MessageID" element="wsa:MessageID"/>
    <part name="RelatesTo" element="wsa:RelatesTo"/>
    <part name="From" element="wsa:From"/>
    <part name="ReplyTo" element="wsa:ReplyTo"/>
    <part name="FaultTo" element="wsa:FaultTo"/>
    <part name="To" element="wsa:To"/>
    <part name="Action" element="wsa:Action"/>
    </message>
    <portType name="wsademoPort">
    <operation name="wsademoResult">
    <documentation>accepts a string value from a relayed response</documentation>
    <input message="tns:wsademoResult"/>
    </operation>
    <operation name="wsademo">
    <documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
    <input message="tns:wsademo"/>
    <output message="tns:wsademoResult"/>
    </operation>
    </portType>
    <binding name="wsademo" type="tns:wsademoPort">
    <SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="wsademoResult">
    <SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
    <input>
    <SOAP:body parts="parameters" use="literal"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
    </input>
    </operation>
    <operation name="wsademo">
    <SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
    <input>
    <SOAP:body parts="parameters" use="literal"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
    </input>
    <output>
    <SOAP:body parts="parameters" use="literal"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
    <SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
    </output>
    </operation>
    </binding>
    <service name="wsademo">
    <documentation>demonstrates WS-Addressing capabilities</documentation>
    <port name="wsademo" binding="tns:wsademo">
    <SOAP:address location="http://localhost:11001"/>
    </port>
    </service>
    </definitions>
    This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
    <definitions
    name="wsademo"
    targetNamespace="http://localhost:11001/wsademo.wsdl"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://localhost:11001/wsademo.wsdl"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    >
    <import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
    <plnk:partnerLinkType name="wsademoPort_PL">
    <plnk:role name="wsademoPort_Role">
    <plnk:portType name="tns:wsademoPort"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    And finally the is the BPEL, WSAtest3.bpel:
    <?xml version="1.0" encoding="UTF-8"?>
    <!--
    Oracle JDeveloper BPEL Designer
    Created: Thu Oct 05 15:27:12 GMT-08:00 2006
    Author: wstielau
    Purpose: Synchronous BPEL Process
    -->
    <process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
    xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:ns1="http://localhost:11001/wsademo.wsdl"
    xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ns2="http://localhost:80/Service.wsdl"
    xmlns:client="http://xmlns.oracle.com/WsaTest3"
    xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
    xmlns:ora="http://schemas.oracle.com/xpath/extension"
    xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
    <!--
    PARTNERLINKS
    List of services participating in this BPEL process
    -->
    <partnerLinks>
    <!--
    The 'client' role represents the requester of this service. It is
    used for callback. The location and correlation information associated
    with the client role are automatically set using WS-Addressing.
    -->
    <partnerLink name="client" partnerLinkType="client:WsaTest3"
    myRole="WsaTest3Provider"/>
    <partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
    myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
    </partnerLinks>
    <!--
    VARIABLES
    List of messages and XML documents used within this BPEL process
    -->
    <variables>
    <!-- Reference to the message passed as input during initiation -->
    <variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>
    <!-- Reference to the message that will be returned to the requester-->
    <variable name="outputVariable"
    messageType="client:WsaTest3ResponseMessage"/>
    <variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
    <variable name="Invoke_1_wsademo_OutputVariable"
    messageType="ns1:wsademoResult"/>
    </variables>
    <!--
    ORCHESTRATION LOGIC
    Set of activities coordinating the flow of messages across the
    services integrated within this business process
    -->
    <sequence name="main">
    <!-- Receive input from requestor. (Note: This maps to operation defined in WsaTest3.wsdl) -->
    <receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
    operation="process" variable="inputVariable" createInstance="yes"/>
    <!-- Generate reply to synchronous request -->
    <assign name="Assign_1">
    <copy>
    <from variable="inputVariable" part="payload"
    query="/client:WsaTest3ProcessRequest/client:input"/>
    <to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
    </copy>
    </assign>
    <invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
    operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
    outputVariable="Invoke_1_wsademo_OutputVariable"/>
    <assign name="Assign_2">
    <copy>
    <from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
    <to variable="outputVariable" part="payload"
    query="/client:WsaTest3ProcessResponse/client:result"/>
    </copy>
    </assign>
    <reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
    operation="process" variable="outputVariable"/>
    </sequence>
    </process>
    -Wayne Stielau
    Open Text Corporation
    Irvine, CA

    I have discovered two issues.
    1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
    2. JDeveloper does not like the double definition of wsaDemoResult.
    When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
    <?xml version="1.0" encoding="UTF-8"?>
    <env:Envelope
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <env:Header>
    <MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    <FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
    </env:Header>
    <env:Body>
    <wsademo xmlns="http://localhost:11001/wsademo.wsdl">
    <in xmlns="">hello</in>
    </wsademo>
    </env:Body>
    </env:Envelope>

  • Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

    Hi,
    when method execute_asynchronous has disapeared since XI/PI 7.1, is
    there still way how to use ABAP proxy in asynchronous way?
    We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
    In PI, both interfaces are defined as asynchronous (outbound for SOAP and
    inbound for ABAP Proxy).
    Despite of this fact, when message is sent, it is processed
    synchronous way.
    I have set breakpoint in my implementation of method for ABAP Proxy
    message processing. When message is sent and breakpoint is reached,
    whole connection stays open (between SOAP and PI and between PI and
    ABAP Proxy) and waits for processing method (the breakpointed one) to
    return. Only when processing method returns, is connection finelly
    closed.
    If i understand it correctly, this is synchronous behavior. In
    asynchronous behavior, as i understand it, should be connection
    between PI and ABAP Proxy of application server closed immediately
    after message has been delivered. This mean before my processing
    method is even called.
    The same could be said about SOAP and PI communication. Connection
    should be closed immediately after PI has received message. From
    definition of asynchronous communication of PI is obvious, that PI
    should receive message correctly and close connection to sender system
    even when receiver is unreachable. It should deliver message later
    when, receiver system is back on line. So why it keeps connection to
    sender system open while it waits for receiver?
    Why is this happening, when both interfaces are defined as
    asynchronous? Could be the reason for this, if APPLICATION
    ACKNOWLEDGEMENT is set on by default? If so, how can i change it
    to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
    Or is this kind of asynchronous communication even possible since
    XI/PI 7.1 ?
    Processing of message we are sending can take some time, so we dont
    want connection pending open while waiting for finish of
    processing. Thats the reason why we have chose asynchronous model to
    use.

    Quote from How to Use the J2EE SOAP Adapter:
    "If you select Best Effort, the Web service client will receive a response
    message in the SOAP body. Otherwise, the Web service client will not receive a
    response message if no error occurs."
    "if no error occurs" - that is the problem. In either case he still
    waits if some error occure or not. I dont want it. Once PI has
    received message, I want the connection with sender to be closed. If
    there will be error in communication between PI and reciever, I want
    to see it only in PI log. That mean no notification to sender to be
    send about that error.
    Is that possible?

  • Communication between jsp and abstractportalcomponent

    Hello All
    Communication between jsp and abstractPortalComponent.
    jsp contains one input text field and one submit button.
    when the user clicks on submit button it will call the component and that input value will
    display in same jsp page.
    how this communication will happen?
    Rgrds
    Sri

    Hi Srikanth,
    In the JAVA File, 
    OnSubmit Event,
    String inputvalue ;
    InputField myInputField = (InputField) getComponentByName("Input_Field_ID");
    if (myInputField != null) {
                   inputvalue = myInputField.getValueAsDataType().toString();
    request.putValue("textvalue", inputvalue);
    request is IPORTALCOMPONENTREQUEST Object.
    In JSP File,   to retreive the value,
    <%
    String  textstring = (String) ComponentRequest.getValue("textvalue");
    %>
    In PORTALAPP.XML File,
    <component name="component name">
          <component-config>
            <property name="ClassName" value="classname"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
          </component-profile>
        </component>
    Using the code above, You can pass and read values between abstract portal component and Jsp Page.
    Instead of this, I suggest you to use JSPDYNPAGE Component for Data Exchange.
    Check the [Link|http://help.sap.com/saphelp_nw2004s/helpdata/de/ce/e0a341354ca309e10000000a155106/frameset.htm].
    Hope this helps you.
    Regards,
    Eben Joyson

  • Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

    Hi
    i am try do
    Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
    With The help of SDN Contribution
    link----
    ( have look on it)
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
    I am getting error in
    Partner system as HTTPLOG and "Execute" to check the results
    Error is --  Port could not be created
    RFC destination HTTPLOG Not specified for system HTTPLOG
    any 1 have any idea  if plzzzzzzzz...........
    Thank u
    Ram

    Hello .
      we are also in  process of implementing the same
    could you share the knowledge pl?
    1)is it a separate add on with ALE to saphr
       or using ECC ??
    2)can u share the configuration part ??
    we are trying it on webas as addon 3.0 .

  • Best communication between ECC and PI

    Hi All
    SAP is planning to adapt Enterprise Service Architecture (ESA) in the journey towards Service Oriented Architecture (SOA).
    We are working on new implementation project. We have many asynchrounous scenarios. We would like to configure acknowledgements and also like to handle errors effectively.
    Could you please suggest which communication between ECC and PI  is preferrable?
    (Webservices, IDoc, BAPI or RFC)
    Thanks
    Sai

    IDoc, BAPI , rfc - all can be used for seamless communication between ECC and PI. It is totallu dependant on the application and way information is exchanged. For master and transactional data idoc are prefered as for the acknowledgements supported by it. Not sure how effeciently we can handle system and appl ack incase of bapi/rfc. but at the same time idoc will be a drawback for sync comunication where rfc/bapi is preferd. It is SOA or ESA the concepts build in SAP are targeted to serve the enterprise needs where idoc,bapi/rfc are used for servicing the business unit objectives

  • SPP Error - No valid transportation lane between Supplier and LOC1

    Hi
    While running the EOQ and SFT planning service, we get the following error
    "No valid transportation lane between Supplier and LOC1". LOC1 is the entry location for our BOD.
    We have not created any procurement relationships as we are working on a standalone SCM trialbox.
    Appreciate any help/suggestions to resolve this issue.
    Thanks & Best Regds
    Mitesh

    Hi Mitesh,
    You need to have valid transportation lanes from the supplier. Maintain it manually. If I remember correctly it is possible to have External Procurement Relationships in APO only (type 4) and not just contracts, purchasing inforecords or scheduling agreements CIFed from ECC.
    Hope this helps.
    Thanks,
    Somnath

  • Communication between : AP and WLAN controller

    Hi,
    The communication between AP and WLAN Controller is ( Data and Control ) UDP.
    Source port 1024 and destination port 12222 and 12223. Actually which device listen to which port or both should listen as control and data can be generated from both the devices.
    How does the user ( wireless client) traffic is switched - if user traffic is a TCP traffic. It will be sent to WLANC and then WLANC forwards it to respective VLAN or default gateway ( depending upon the destination in the packet ).
    Please explain / share the experience.
    any link on cisco.com
    Thanka in advance
    Subodh

    "the LWAPP Control and Data messages are encapsulated in UDP packets that are carried over the IP network. The only requirement is established IP connectivity between the access points and the WLC. The LWAPP tunnel uses the access point's IP address and the WLC's AP Manager interface IP address as endpoints. The AP Manager interface is explained in further detail in the
    implementation section. On the access point side, both LWAPP Control and Data messages use an ephemeral port that is derived from a hash of the access point MAC address as the UDP port. On the WLC side, LWAPP Data messages always use UDP port 12222. On the WLC side, LWAPP Control messages always use UDP port 12223.
    The mechanics and sequencing of Layer 3 LWAPP are similar to Layer 2 LWAPP except that the packets are carried in UDP packets instead of being encapsulated in Ethernet frames."
    Taken from "Cisco 440X Series Wireless LAN Controllers Deployment Guide"

Maybe you are looking for

  • How do I force a file download from a folder above the root?

    I am new to ColdFusion and need some help. I set up a virtual folder on my website and then mapped in the CF9 admin panel to a "Docs" folder above my root, where I would like to store sensitive documents. CF tags are enabled. I know that my mapping i

  • Create CGRect from view's frame (iPhone OS 3.1)

    Another basic question, but how do I create a CGRect from a view's frame? I'm thinking of doing something like CGRect drawSurface = self.view.something but I'm not sure exactly what propert(ies) to invoke. Any help would be appreciated!

  • Keyframing vanes

    Any thoughts would be appreciated. I need to create an animation of a rotary pump. Inside the pump are several vanes. Think of these as narrow rectangular objects residing within a circle. The objects (vanes) extend from the center of the circle out

  • HT4009 In app purchase not showing up in game:legend of the cryptids

    I am playing 'legend of the cryptids' and purchased gems thru the game.  I have yet to receive the gems and every time I load the game it asks me for my password for itunes.  I've gotten billed twice for the gems and I have the receipts for both.  th

  • Site Advisor doesn't work w/Firefox v5. How can I revert to an earlier revision?

    Your notification said the update to FFv5 was "strongly recommended". If you'd told me siteadviser would be disabled, I'd never have updated. Site Adviser doesn't work w/Firefox V5. How can I revert to an earlier revision? Thx