ERROR : Entries for application 13 still exist in the extraction queue -

Hi everybody,
While modifying extractor (LO Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
" Entries for application 13 still exist in the extraction queue -> "
and it is givig the Diagnosis as below
Diagnosis
You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
Please help me out..it is urgent...
Thanks in advance

Hi Sunita,
Do one things, to fix this problem, go to the BW for that info package, it seems
its already exists..if yes..delete the initialization request from the package
and come back to R/3 try to delete the application 13 and it will allow to make
the changes to the struc.
Hope it helps..
Need further help revert..
Assign points if useful..
Cheers,
Pattan.

Similar Messages

Urgent Entries for application 11 still exist in the extraction queue

Hi All,
In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
Following is the error iam getting.
Entries for application 11 still exist in the extraction queue ->
I have set the Update to inactive and trying to add fields to Extract strucutre .
Morover,
I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
Regards,
C.V.
Message was edited by: P.C.V.

PCV,
Here are the steps. Make sure you do them when there is no posting going on.
1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
You should be able to change the extract structure now.
Abdul

Unknown error occurred for application (application name) (id=5 [5], 5[5])

Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
Kenneth

Originally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps.

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved" ones before I write the new one. What to do to finally/definitely delete the save

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?

sorry it's ios6

Error Message: 'Distribution list still exists in the trash'

HI All
Please help us to provide the necessary solution as per the below query.
1. Which SAP transaction or program can I run to find information on when & what Distribution Lists have been deleted and by whom?
2. we are trying to recreate the same distribution list again by using transaction code S023, we are unable to create the same distribution, we are getting the below error message.
Error Message: 'Distribution list still exists in the trash'
Regards

SAp inbox

Files still exist after the copying is disrupted

I have a problem when the large file copy from the laptop to the external USB HDD or NAS (via CIFS share). When the copy is disrupted (either the network is down or the power outrage to my external HDD), the file still exist in the folder but cannot be
read or open. The corrupted file is still showing full size of the file. How can I avoid this?

Hi,
If you copy large files from the laptop to the external USB HDD or NAS, when the copy is disrupted, the files could be corrupted and we unable to read the file's contents. In general, your need to delete the file and copy the file again.
In additional, you could try to use diskpart to repair the disk to recover the files.
DiskPart Commands
http://technet.microsoft.com/en-us/library/cc770877%28v=ws.10%29.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

Running MacOS 10.9.4 16 Gb RAM Lightroom v5.2

Messages still stuck in the Inbound queue SMQ2

Hello XI Gurus,
All my messages with "READY" status are still stuck in the inbound queue (smq2) for the last 2 hours...there was no SYSFAIL error messages or scheduled background running. I have to manually go in and executed each of those messages, instead of automatically process it. Could someone please tell me how to troubleshoot this?
Thanks so much in advanced,
Dng

Implement SAP note 758677 for this. This exactly deals with your issue.
This Basically speaks about scheduling 'RSQIWKEX' for inbound and 'RSQOWKEX' for outbound queues.
Also, you need to set the parameter 'QRFC_Restart_ALLOWED' to '1' in the transaction 'SXMB_ADM' -> Integration engine. Its in the runtime dropdown menu.
Note : without this parameter being set this will not work.
Thanks,
Karthik
Edited by: Karthik Rangaraju on Oct 1, 2008 2:13 PM

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

Error: No valid application component hierarchy exists in RSA5

Hi Gurus,
We have recently installed SAP R/3 for BW. when i get in to RSA5 i am getting error message "no valid application component hierarchy exists" . Do i need to do any settings here. When click enter later on, i can see all the data sources under new_hier_root.
And under new_hier_root i have unassinged notes
New_Hier_root -> unassigned notes -> application components.
Thanks in Advance,
Jameel

Jameel,
first we need to transfer application hierarchy.
try this one SBIW>Business Content DS>Transfer Application Component Hierarchy or RSA9.
Hope this help.
Regards,
Nagesh Ganisetti.

BDCDATA error-Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000

Hi
I am trying to call transaction MIR7 from ABAP code and passing values to the same.
I am able to pass data to first tab using code (as recorded in SHDB) :
    DATA BEGIN OF BDCDATA OCCURS 1.
    INCLUDE STRUCTURE BDCDATA.
    DATA END OF BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLACHD'.
    BDCDATA-DYNPRO   = '1000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'BKPF-BUKRS'.
    BDCDATA-FVAL     = CompCode.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLMR1M'.
    BDCDATA-DYNPRO   = '6000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BLDAT'.
    BDCDATA-FVAL     = InvoiceDate.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-WRBTR'.
    BDCDATA-FVAL     = InvoiceAmount.
    APPEND BDCDATA.
    Call Transaction 'MIR7' USING BDCDATA MODE 'A'.
But when I add fields
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-ZUONR'.
    BDCDATA-FVAL     = 'HELLO !!!!!'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BKTXT'.
    BDCDATA-FVAL     = 'MY DATA .........'.
    APPEND BDCDATA.
I get an error message :
Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
But when I add
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLFDCB'.
    BDCDATA-DYNPRO   = '0150'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
before setting INVFO-ZUONR, the error disappears, still I don't get values in HeaderText and Assignment fields on GUI
Can anybody help.
Thanks a lot
Ruhi Hira

I had used the exact recording as in SHDB but no success.
Is it OK to create a parameter map this screen field to the parameter.
Where I can set the parameter outside the screen..
Ruhi Hira

Do PlayFile and AddFile still exist in the iTunes COM interface?

I'm playing around with the iTunes COM SDK on Windows. I'd like to come up with a script that causes iTunes to play a video file, and either the PlayFile (associated with the liTunes interface) or AddFile (IITUserPlaylist) methods ought to do the trick -- at least in theory.
Unfortunately, neither of them work. They're both still apparently valid method calls, since my Java -> COM bridge barfs when I feed it invalid method names. But neither of them actually does anything. By way of contrast, OpenURL and AddURL both work perfectly -- and they'd be viable workarounds, save that they both assume the input file is streaming audio and store it in the library as such.
Have these methods been deprecated? If so, what have they been replaced with? Or is it more likely that I'm running afoul of one gotcha or another?
Right now, the only workaround I can think of is to write code that edits "iTunes Music Library.xml" directly, and I'd rather avoid that for what should be bloody obvious reasons.
Thanks in advance for any insight anyone has to offer on this.

In general:
- The best way to check if files are in a library is to drag the whole media folder to the library. If something was missed it will be added. If it is in the library is won't be added a second time.
- If you have a second copy of a file and iTunes does not currently list that specific file in its database then even if it is identical to one already in the database it will add it a second time. So if you have file xyz on the internal drive and the external drive and add them to iTunes you will end up with two entries for the same thing in iTunes because you really do have to copies of the files. While this can happen with two copies on a single drive, it will almost definitely be the case when you have a copy of a file on two drives because iTunes really sees them as two different things.
-Unless you know how iTunes works, avoid moving files yourself. Let the consolidate feature do all the file moving. Manually moving files can really mess up iTunes unless you know what you are doing and have iTunes set to not try to do it itself.
- There's no clean and easy way to delete duplicates. The best thing is to change practice so you don't create them. Here are references:
How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)
http://www.hardcoded.net/dupeguru_me/

I hit the wrong entry for find my ipad, I hit the iphone, how do I get it to correct

I hit the wrong entry for "find my ipad, how do i get it to correct

You can log out of the currently logged in account by tapping on it in Settings > Store, and you should then be able to log in with the account that you want.

No entry for mailbox id ... in the cache; this should never happen

I'm seeing this in my Console Log. Multiple entries for specific ids (see below). Should I be concerned? (I am not really concerned about the "this should never happen," having been a programmer and supervised programmers.)
I've got the latest system patches. I have AttachmentsScannerPlugin.mailbundle, Imap-idle-plugin.mailbundle, MailActoOn.mailbundle, and MailFollowup.mailbundle.
Thanks!
Fred
From the log:
2006-10-03 10:20:58.308 Mail[6088] no entry for mailbox id 137 in the cache; this should never happen
2006-10-03 10:20:58.324 Mail[6088] no entry for mailbox id 153 in the cache; this should never happen
2006-10-03 10:20:58.326 Mail[6088] no entry for mailbox id 153 in the cache; this should never happen
2006-10-03 10:20:58.328 Mail[6088] no entry for mailbox id 153 in the cache; this should never happen
2006-10-03 10:20:58.329 Mail[6088] no entry for mailbox id 137 in the cache; this should never happen
2006-10-03 10:20:58.331 Mail[6088] no entry for mailbox id 137 in the cache; this should never happen
2006-10-03 10:20:58.333 Mail[6088] no entry for mailbox id 137 in the cache; this should never happen
2006-10-03 10:20:58.370 Mail[6088] no entry for mailbox id 185 in the cache; this should never happen
2006-10-03 10:20:58.373 Mail[6088] no entry for mailbox id 185 in the cache; this should never happen
2006-10-03 10:20:58.376 Mail[6088] no entry for mailbox id 185 in the cache; this should never happen
2006-10-03 10:20:58.379 Mail[6088] no entry for mailbox id 185 in the cache; this should never happen
2006-10-03 10:20:58.388 Mail[6088] no entry for mailbox id 139 in the cache; this should never happen
2006-10-03 10:20:58.391 Mail[6088] no entry for mailbox id 157 in the cache; this should never happen
2006-10-03 10:20:58.623 Mail[6088] no entry for mailbox id 175 in the cache; this should never happen
...

The following procedure would probably solve the problem if the plugins were properly uninstalled first. I don't know whether it'll work in the current situation:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Move any "IMAP-", "Mac-", or "Exchange-" account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON'T trash any "POP-" account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

For UCCE 7.0, what are the default queue limit

Hi, I am fairly new to this product, I am wondering if there is any doc indicated the default queue limit settings, I couldn't find in the script that the set value node, so I guess it must be running using the default value. please advise, thanks

It is common for those coming from a TDM PBX background (say Avaya) to ask how big the queue is. Since on those platorms one can set a limit on the number of calls one can put into the ACDQ.
Once full, other callers will get a busy signal. On extremely busy call centers, this seems like a reasonable way to block calls when under heavy load.
ICM (UCCE) doesn't have a fixed limit like this, and the Call Router can keep queuing calls. There probably is a software limit, and it may be set in the Router registry. I don't know what it is.
To try to avoid putting callers into a "queue" when the number already queued is very high, you could check this in the Script before the "Queue To Skill Group" node - if this is what you need to do.
Regards,
Geoff

ERROR : Entries for application 13 still exist in the extraction queue -

Similar Messages

Maybe you are looking for