Error Field selection in material master for Tax

While creating material master MM01 in Sales orgn tab when I am trying to save HST tax for Canada, it is disappearing. Although I have classified customer tax & material tax in IMG-Sales & distribution as 1 & 0 both.
In MM I can see HST either 0 or 1 when pressing F4
I tried Log General/Material Master/Field Selection/Maintain Filed selection for data screen
I tried 0001 group but when opened it gives various numbers for optional/required/supressed/display entry
Which number is used for TAX? I could not identified.
Can any one tell me what is transaction code for field selection group for material master for making Tax Required Field?
Thanks for help.

Hello,
Tax problem is resolved by me only.
In Tax classification IMG/Sales & Dist/Taxes/Define Tax determination Rule
HST number was 4 I made as number 1 followed by CTX1 as 2 CTX2 as 3.....so on
So it picked up HST now as this was number one. Now in MM Tax is mandatory as I put 1 & in pricing it picked up.

Similar Messages

  • Plant specific fields in the material master for product move

    Hi, SAP gurus,
    My scenario is we are moving a existing product in US plant to Brazil plant. What are the fields in the material master that are specific to a plant that will change. For ex MRP controller will change from plant to plant. Like that can anybody please provide me a list of fields that i need to be looking at?
    Thank you
    Anusha

    Hi Anusha,
    First of all, list down all your materials those you want to extend to new plant.
    a) Secondly, pay attention to those fields you will find "filled" in those materials at plant level.
    b) MARC comes handy for you to analyse which fields are at plant level.
    Intersection of fields with values between a and b are the ones you need to work out.
    Good luck,
    Regards

  • Field selection on material master by plant

    Dear friends ,
    Does anyone knows if I can configure material master field selection by PLANT ? which steps should we perform ?
    best regards,
    Ale

    Hi,
    Proceed as below;
    1. OMS9 - Here copy a new Field Reference key (Give Code of your Plant) from "0001" and do field selection as per your requirement.
    2. Then go to OMSA, here maintain Plant with Maintenance Status "KDEVALBPQSZXCFG" and assign the Field Reference key created in Step 1.
    Now for this plant, field selection will work as per the above field selection method.

  • Tax classification field of the material master - Mandatory

    At the "Sales: sales org. 1" view of the material, there exist the tax classification field of the material master. How can I make this field mandatory?

    Hi
    Go to T-code OMSR
    Select Field name MARA - TAKLV and click on the arroow sysmbol on the right against that line.
    For Field Ref MM01 - select the radio button "Reqrd Entry".
    Hope this answers your question
    Regards
    Madhu

  • Extending material master for different sales org/plant combination

    hi ,
    1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel--
    plant ". (let's say sales org A and B  selling from plant 1 and also sales org A selling from plant 2)
    when we have defined the above config step, then why we need to have material master extended for different combination of sales org and plant as in stpe 1 ?. we can just create one material master with one plant and sales org combination and based on config as in step one, we can sell material from any sales org from a plant  ?
    2) we can extend  material master for any combination of sales org/plant .....is it also possible to extend material master to different storage locations !
    regds
    pamela
    Edited by: Pamela79 on Feb 15, 2011 11:02 AM

    There are several reasons why you should extend the materails to different sales organizations and plants.
    a. The materials are normally valuated at the plant level. So, you can have different valuations at different plants.
    b. You can have different quantity stored in different plants. How do you know which plant has what quantity.
    c. You can have materail not to be sold from one plant, but you can have the same materail sold from the other, how do you block it? at the plant and materail combination, you can do it.
    d. For different sales organizations, you may want the cost and the price to be posted to different GL accounts. You can control it at sales org level of the materail.
    e. You may just want the material to be purchased but not sold, then you may not even create a sales org view for the material. But say, in future you will like to only purchase a materail from a plant and consume it for some other purpose but not sales (which u did previously), then you can block it at sales org and dbr level.
    So, these are a few reasons. But there could be many. You can have a look at the fields in the material master at sales org level and plant level and you can find it for yourself howmany parameters are there to control...
    Hope this helps...
    Regards,
    Mukund S

  • Material Master for Maintenance material

    In regards to a Material Master for a Maintenance storeroom Material, On the MRP 2 tab there is a field called Safety time/act.cov.
    What is the difference between that and the planned delivery time of a material. I have tested both and they appear to do the same thing in materials planning. Can you tell me the differences between these 2 fields
    Thanks

    HI Yocoma,
    The first difference I can site is that is in Workdays whereas Planned Delivery time is in Calender Days and is based on past experience
    For further details please go through these links
    http://help.sap.com/saphelp_45b/helpdata/en/f3/dbbb16b36111d1a6770000e83235d4/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/f3/41b53c4d36265ce10000000a114084/content.htm
    Hope this helps!
    Thanks,
    Ravi

  • Material Master For Project

    Dear All,
    How we configure material master for Project stock
    Pl Help Step By Step
    or any document
    Regards
    Ranu

    Hi,
    While creating material master for project, you can select views as per relevance. While creating PO you should be clear whether you want to inventroze the stock or not. You can use account assignment as Q for matrial with Inventory.
    regards,
    Vinay

  • Material group in material master for different plants

    Warm greetings Masters of Material Management
    We have one material master for three different plants example  1000, 2000 &3000 with same material group  with different valuation class
    If we change material group in plant 2000 it is reflected in 1000 & in 3000
    My question is  this the standard practice that material group changed in one plant will be reflected in other plants
    Regards
    shamul heq

    Thank u Amola  
    The current situation, if user change  material group for plant 2000, it is effected in plant 1000 & in 3000
    the impact of this is in purchase requisition
    As the release statergy  is triggered from material group    to different department
    How can we solve this issue
    regards
    shamul heq

  • Adding a Z field in the material master at the plant level

    Hi,
    I want to add a new text field in the material master.
    The data maintained inthis field should be easliy retrievable using  some STD SAP Report or using Abap query ( SQ01/SQ02)
    Please advise how do i do it.
    Regards,

    Hi,
    I want to add a new text field in the material master.
    The data maintained inthis field should be easliy retrievable using  some STD SAP Report or using Abap query ( SQ01/SQ02)
    Please advise how do i do it.
    Regards,

  • Material master for job work material

    Hi all!
      We are doing only job work for our customers and the products are not regular one . Its a one time job work.. i.e each time different material will come.. So each time i cant create a material master since the frequency is high That is we receive 100 different materials per week and do job work on that and send.. Same material will not repeat again..So how can we substitute of creating material master each time.. What is the solution for this?
    Thanks in advance,
    Raj.

    Hi vivek!
       Thanks for your reply..
    But what is the need of creating PO's.. I am simply receiving the material(non-valuated) form the customer and do some service in it and send it back to him.. I will process this via sales.. But my question is whether should i create a material master for each time i receive a new material since its one time job and weekly we r receiving around 100 new materials.
    Thanks,
    Raj.

  • Material master for Rods and Plates.

    Hi all!
       I need to know the answer for two critical questions in SAP-MM. I have asked this question some time before but have'nt got any replies. Here again i throw the same.
    1. How to maintain material master for Rods of various diameter and length. One thing is sure that ordering unit is 'Kgs' and Basic unit of measure is 'mm'. I have a typical example for this. Say 1kgs=30mm. I am purchasing 1000 kgs (i.e.30000mm). In GRN i can receive the material as a whole stock say 30000mm.
           But eventhough the total length of the stock is 30000mm where can i maintain the breakage.i.e. for example say,
       1000mm - 10 Nos. 2000mm - 5 Nos. 2500mm - 4 Nos.
    some of our friends are saying that we can map this via batch. But even batch is not possible. There is a reason. Say if length is the batch number and basic unit of measure is Nos, then how can you give the conversion between Nos & Kgs in additional data. For example how can i say 1000 kgs = 1 nos or 2 nos. This will be ridiculous then. I can give every dia available into different material codes. Thats not a problem. But how to receive rods in different length. I need the length & numbers combination. Also while issuing the materal after cutting numbers should reduce accordingly.
    2. How to maintain the material master for Plates of various thickness. I think we can use Kgs as ordering unit and Sq.mm as basic unit of measure. How can we map the material issues to production for these kind of materials. We are issuing the material after cutting in 2-D only of various sizes in same material. No 3 domentional cutting is done. I need  the lenght & width to be changed accordingly after issuing. 
    Thanks in advance,
    Regards,
    Raj.

    Hi all!
    I need to know the answer for two critical questions in SAP-MM. I have asked this question some time before but havenu2019t got any replies. Here again I throw the same.
    1. How to maintain material master for Rods of various diameter and length. One thing is sure that ordering unit is 'Kgs' and Basic unit of measure is 'mm'. I have a typical example for this. Say 1kgs=30mm. I am purchasing 1000 kgs (i.e.30000mm). In GRN i can receive the material as a whole stock say 30000mm.
    But even though the total length of the stock is 30000mm where can i maintain the breakage.i.e. for example say,
    1000mm - 10 Nos. 2000mm - 5 Nos. 2500mm - 4 Nos.
    Dear
    ANS:
    First create different material code specific to length so identity of material at store will be their.(with specification at purchasing text tab)
    Now as ur sure with ordering unit keep as kg. (this is at info record level)
    Base UOM will be as MM (material master)
    So now about issue part keep conversion factor as u require and make some standard according ur client .
    some of our friends are saying that we can map this via batch. But even batch is not possible. There is a reason. Say if length is the batch number and basic unit of measure is Nos, then how can you give the conversion between Nos & Kgs in additional data. For example how can i say 1000 kgs = 1 nos or 2 nos. This will be ridiculous then. I can give every dia available into different material codes. Thats not a problem. But how to receive rods in different length. I need the length & numbers combination. Also while issuing the materal after cutting numbers should reduce accordingly.
    2. How to maintain the material master for Plates of various thickness. I think we can use Kgs as ordering unit and Sq.mm as basic unit of measure. How can we map the material issues to production for these kind of materials. We are issuing the material after cutting in 2-D only of various sizes in same material. No 3 domentional cutting is done. I need the lenght & width to be changed accordingly after issuing.
    ANS:
    Dear for this make material master as name with ur spacification and UOM as kg after cutting or processing according to Wight  u can make issue note in the system.
    Name as plate x*y sqr mm
    So ordering as kg
    Issue as kg

  • Material Master for IS Media

    Hello All,
    I am working on SAP IS Media Project for a publication company.
    I have created the material master for the Books as per the heirarchy means Prodyct Family, Product group and Issue. with all ISBN
    now these issues of books may belong to a series. my question is how to create a series in SAP and how do i assign the books belonging to these series. in SAP we have standard material type MSUB for series product creation.
    but how I can assign the various isues to this searies
    Regards

    I solved this problem by myself. FYI while loading Product hirarchy data there is a filed called ISMHIERARCHLEVL which we need to assign the category, '1' for family, '2' for product and '3' for issue.
    Thanks,
    Raj

  • Material master for packing materials for based on customers

    Dear all,
           can any one tell me how to maintain material master for packing materials based on customers to whom finished goods r supplied.
    Regrds
    harish

    Hi Harish,
    Option : 1
    Create your packing (VERP) material as per the Customer.
    E.g.
    Packing material   Product   Customer
    200000000            ABC         XYZ
    200000001            ABC         YZX
    200000002            ABC         XZY
    200000003            BCD         XYZ
    200000004            BCD         YZX
    200000005            BCD         XZY
    Option : 2
    If you are batch managed then and then only this option will work.
    Create Characteristic "Customer"
    - Assign it a Batch Class (023)
    - Assign this batch class to the material
    - Now as and when any transaction will be done on this material, you can apply the relevant customer to the batch and separate that particular by customer.
    Regards,
    Shyamal

  • Mass maintainenance of material master for the field MARC-NCOST,SOBSK

    Hi
    While maintaining two fields NCOST and SOBSK for hude materials using MM17 transaction, the transaction executed properly while saving the transaction. There is no warning and error messages for all materials. But it was not updated in material master or in tables. for other field relavent to MRP updated correctly.
    when I am maintaining manually for each material it is taking the value update the same.
    Please explain the problem why it was not updating and let me know the solution.
    Regards
    Kishore

    Hi,
    Thanks for ur response.
    I am getting green light. Please note the application message given below.
    "The material cannot be maintained since no maintainable data transferred
    Message no. MG160
    Diagnosis
    You wanted to maintain an existing material master record as follows:
    By changing it
    However, you have not yet maintained the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Create mode.
    By extending it
    However, you have already fully created the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Change mode.
    In both cases, this message can appear if there is no maintainable user department left. This occurs if you have not set the Check required fields indicator when transferring data (program RMDATIND). Although the absence of an entry in required fields does not then necessarily result in an error, the number of maintainable user departments is reduced accordingly.
    Procedure
    Depending on the cause, maintain the material master record in Create or Change mode, or also transfer the missing required fields."
    where can I find IDoc list for this transaction.
    Regards
    Kishore

  • How to include field Internal order in the material master for SD orders

    Hello,
    I would like to know how I can bring the field "Internal Order" to the material master, so I can create materials with assignments to internal orders.
    We want to create Sales Orders where when we enter on order item with a material, the internal order is derived automatically from the material master.
    Thank you in advance!
    Jose Eximeno

    Hello,
    I am not familiar with the field "product attributes" in relation with entering the field "internal order"...
    Could you be a little more specific on how product attributes can be used to enter the internal order number in the material master?
    Best regards,
    Jose

Maybe you are looking for

  • My adobe Flash player  does not connect on my Laptop HP Windows 7.

    My  Adobe Flash 11 Player on my laptop HP Windows 7 does not connect.  (or cannot be found even though it is downloaded in the programs

  • Lookup value mapping table through message mapping.

    Hello All, I am working on a graphical mapping (message mapping). When trying to map the source message to the target message, I need to find out it a particular <b>key</b> exists in the <b>value mapping table</b>. Depending on the result, I need to

  • Error in selecting Date

    Hi, I am not able to select any date except of this month.If I try to select it will give NAN in the date navigator field. Where ever i use Date Navigator in any project I am having the same issue. I am not able to select the date except present mont

  • Frustrated with Shuffle

    My son got an iPod Shuffle today for his birthday and a iTunes gift card. The Shuffle worked great at first. He immediately downloaded about 11 songs and everything was working fine. Then he decided to look for a few more songs and now we can't seem

  • Can you set pager attribute using jstl c:out tag?

    I am trying to use the pager tag library from jsptags.com. The pager tag has a maxPageItems attribute. I want maxPageItems to be variable. I also want to use the jstl instead of scriptlets and expressions. Instead of writing <pg:pager     maxPageItem