Error getting while importing support package in R/3

Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error.
Thx & Regds,
SGK

Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK

Similar Messages

  • While Import support package getting error in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error. How do I delete the open data extraction process specified here.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Errors while importing support

    hello all,
    I am getting following errors while importing support
    packages Queue SPAMu2026
    - Error in phase: CHECK_REQUIREMENTS
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0232
    - Error message: connect failed
    I have checked the TPPRAM file, RFC connection and
    it's normalu2026
    I even changed the directory to /usr/sap/trans/bin and
    executed command "tp connect <SID>" and same erroru2026
    Return code: 0232
    Also I tested the connectivity from STMS
    RFC Link tp was started successfully
    tp Version 340.15.02
    DB Connect Link to database failed
    Offline Call connect failed
    any ideas? any suggestions? I really need help.
    Jack Lee

    Dear All:
    the error still the same~
    I excuted the R3trans -d and came out like below:
    C:\Documents and Settings\dbsadm>R3trans -d
    This is R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERV
    ER = 'PRDTEST' DBNAME = 'DBS'"
    R3trans finished (0012).
    and here is the trans.log:
    4 ETW000 R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.07.2005 - 15:36:52
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sat Jul 02 15:36:55 2005                            6991  0.006991
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    65  0.007056
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            183  0.007239
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                51  0.007290
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0          1550  0.008840
    4 ETW000  [dev trc     ,00000]      using "C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll"
    4 ETW000                                                                              14  0.008854
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                         7  0.008861
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              11  0.008872
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "640.00", patchlevel (0.266)
    4 ETW000                                                                             492  0.009364
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll
    4 ETW000                                                                               9  0.009373
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll
    4 ETW000                                                                              19  0.009392
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              75  0.009467
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              40  0.009507
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         36  0.009543
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              10  0.009553
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              14  0.009567
    4 ETW000  [dev trc     ,00000]  Thread ID:2320                                      3431  0.012998
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface             51  0.013049
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll'
    4 ETW000                                                                              37  0.013086
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                             117  0.013203
    4 ETW000  [dev trc     ,00000]    patchlevel   0                                     112  0.013315
    4 ETW000  [dev trc     ,00000]    patchno      266                                     8  0.013323
    4 ETW000  [dev trc     ,00000]    patchcomment Batch jobs stay in Ready status (1291921)
    4 ETW000                                                                              10  0.013333
    4 ETW000  [dev trc     ,00000]  np:(local) connection used on PRDTEST                 84  0.013417
    4 ETW000  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'dbo'                   9  0.013426
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                             12800  0.026226
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             570  0.026796
    4 ETW000  [dev trc     ,00000]  Provider Release:9.00.4035.00                      54486  0.081282
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              3456  0.084738
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             311  0.085049
    4 ETW000  [dev trc     ,00000]  i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
    4 ETW000                                                                            8298  0.093347
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PRDTEST' DBNAME = 'DBS'"
    Regards
    Jack Lee

  • DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

    Hi Gurus,
    I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
    I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
    Can you please help to reset the queue and implementing this support package.
    Thank you,
    Regards,
    Ganesh

    Paste the SPAM log here.
    Regards,
    Nick Loy

  • Error while applying support packages

    Hi,
    I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW,  the support package level was 02, I have downloaded 03,04,05,06 for all the above four components.  While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
    1.     
    Category: Abap programming error
      Runtime error:  call_function_parm_unknown
    CX_SY_DYN_CALL_PARAM_NOT_FOUND
    abap program: RSSPAM07
    Function parameter "IV_IMP_SCENARIO" in unknown
    this first error displayed after applying SPAM/SAINT update.
    2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
    The following details help you to analyse the problem:
    Error in phase : IMPROT_PROPER
    Reason for error:
    Return code:
    Error Message:
    Please provide any solution as soon as possible....

    The details of SLOG
    START CMDIMPORT            NG1 L      20120227162812              SHABZ        BasisTrn3 20120227162811973  
    STOP  CMDIMPORT            NG1 L      20120227162813              SHABZ        BasisTrn3 20120227162811973  
    START imp all              NG1        20120227162821              SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_START triggered successfully
    START DD IMPORT            NG1 H      20120227162822              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD IMPORT            NG1 H      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START DD ACTIVATION        NG1 A      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 J      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 J      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD ACTIVATION        NG1 A      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START DISTRIBUTION OF DD-O NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    INFO  TBATG CONVERSION OF  NG1 N      not needed                  SHABZ        BasisTrn3 20120227162821661  
    START MOVE NAMETABS        NG1 6      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 P      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 P      20120227162935              SHABZ        BasisTrn3 20120227162821661  
    STOP  MOVE NAMETABS        NG1 6      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    START MAIN IMPORT          NG1 I      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    STOP  MAIN IMPORT          NG1 I      20120227163023              SHABZ        BasisTrn3 20120227162821661  
    START TBATG CREATION OF EN NG1 n      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 Y      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 Y      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    STOP  TBATG CREATION OF EN NG1 n      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    START EXECUTION OF REPORTS NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    STOP  EXECUTION OF REPORTS NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0004 20120227163203              SHABZ        BasisTrn3 20120227162821661  
    START CMDIMPORT            NG1 L      20120227164418              SHABZ        BasisTrn3 20120227164416991  
    STOP  CMDIMPORT            NG1 L      20120227164454              SHABZ        BasisTrn3 20120227164416991  
    START DD IMPORT            NG1 H      20120227165608              SHABZ        BasisTrn3 20120227165607479  
    STOP  DD IMPORT            NG1 H      20120227170309              SHABZ        BasisTrn3 20120227165607479  
    START DD ACTIVATION        NG1 A      20120227170313              SHABZ        BasisTrn3                    
    START tp_getprots          NG1 J      20120227170313              SHABZ        BasisTrn3                    
    STOP  tp_getprots          NG1 J      20120227171206              SHABZ        BasisTrn3                    
    STOP  DD ACTIVATION        NG1 A      20120227171206              SHABZ        BasisTrn3                    
    START imp all              NG1        20120227171208              SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_START triggered successfully
    START DISTRIBUTION OF DD-O NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 S      20120227171303              SHABZ        BasisTrn3 20120227171207614  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CONVERSION OF  NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CONVERSION OF  NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START MOVE NAMETABS        NG1 6      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 P      20120227171308              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 P      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    STOP  MOVE NAMETABS        NG1 6      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    START MAIN IMPORT          NG1 I      20120227171756              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  MAIN IMPORT          NG1 I      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CREATION OF EN NG1 n      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    START tp_getprots          NG1 Y      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  tp_getprots          NG1 Y      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CREATION OF EN NG1 n      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0903 20120227195522              SHABZ        BasisTrn3 20120227171207614

  • RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load

    Hi;
    I imported Support Package SAPKW70022 but after import data load from  MSSQL gives error RSM2052.
    How can I solve my problem.
    Best Regards.

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Error in xpras when importing support packages in solution manager

    Hello,
    We are importing support packages in our solution manager and we begun
    the process more than two weeks ago and the process is still running.
    I have stopped the system and restarted the import again, but it seems
    to be the same. The SP queue is:
    SAPK-1507EINSTPL
    SAPK-1507FINSTPL
    SAPK-1507GINSTPL
    SAPK-1507HINSTPL
    SAPK-1507IINSTPL
    SAPK-1507JINSTPL
    SAPKB70015
    SAPKA70015
    SAPKITL426
    SAPKIPYJ7F
    SAPKW70017
    SAPKU50012
    SAPKB70016
    SAPKA70016
    SAPKITL427
    SAPKIBIIP9
    SAPK-40012INCPRXRPM
    SAPK-40013INCPRXRPM
    SAPK-40014INCPRXRPM
    SAPKNA7012
    SAPKNA7013
    and there is an error (rc=12) at the method execution step in package SAPKU50012 or in SAPKB70016.
    Now, there is an rc 12, but the queue is running, the import queue hasn't cancelled, but it seems to do nothing. The RDDEXECL job log is:
    Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server crosol203 were synchronized
    Error Building the ENH TreeObject Type:XHObject Name:EH_FJ_FUBA_PARA_VERS
    the job was running for 149.332 seconds and at that moment I stopped the sap system. After restating the system I imported the queue again and now, the process has been running for more than 13500 seconds.
    We have checked note number 1142410 and all the modifications were already implemented in the system.
    Thanks and best regards,
    Ana.

    Hello Sunny,
    The problem is still happening. I have read and apply all the threads you suggested, nut they didn't resolve the problem:
    I have updated the kernel
    I have checked table DRSEG and it has no problems.
    I don't have any syntax errors so I haven't run the SGEN as I think it doesn't apply.
    After changing the kernel I have started the sap system and the job rddexecl has started itself before running again the SPAM and reimporting the queue.
    I already have 6 support packages without running the method execution step and I don't know how much time it will consume.
    Regards,
    Ana

  • HT4858 why am I getting an error message while importing from iPhone photo stream to iMac ?

    I have not shared any photo for a few months.  I tried to import photos into my iMac from iPhone photostream and I get a message saying "an error occurred while importing photo, please try again later".  What am I doing wrong ?

    There's no need to import photos from your iPhone to your iMac. Photostream is synced automatically via iCloud on Wi-Fi.
    On your iPhone, tap Settings > iCloud
    Make sure Photo Stream is switched ON.
    On your iMac, open System Preferences > iCloud
    Make sure Photo Stream is selected.

  • Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER

    Dear Expert,
    I have some problem when import support package SAPKB70015 at PI System.
    IT had shown as below.
    Main import
    Transport request : SAPKB70015
    System : CXI
    tp path : tp
    Version and release: 372.04.08 700
    sap_dext called with msgnr 4:
    db call info
    function: db_report_interface
    fcode: UPDATE_REPORT
    tabname: TEXT
    len (char): 40
    key: /OSP/CL_CJS_CONTEXT===========CP
    retcode: 4
    Main import
    End date and time : 20081120021353
    Ended with return code: ===> 12 <===
    And I checked the transport log,It shown as below.
    4 ETW690 COMMIT "360444" "53156878"
    3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
    4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
    4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
    4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
    4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
    4 ETW000 85 39.924883
    4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
    e=REPOTEXT
    4 ETW000 66 39.924949
    4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
    4 ETW000 53 39.925002
    4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
    0a4220,vda_p=0x111e21a60
    4 ETW000 58 39.925060
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
    4 ETW000 48 39.925108
    4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
    11e222c0
    4 ETW000 55 39.925163
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
    4 ETW000 47 39.925210
    4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
    4 ETW000 51 39.925261
    4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
    4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
    4 ETW000 75 39.925365
    2EETW000 sap_dext called with msgnr "4":
    2EETW000 -
    db call info -
    2EETW000 function: db_report_interface
    2EETW000 fcode: UPDATE_REPORT
    2EETW000 tabname: TEXT
    2EETW000 len (char): 40
    2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
    2EETW000 retcode: 4
    1 ETP154 MAIN IMPORT
    1 ETP110 end date and time : "20081120021353"
    1 ETP111 exit code : "12"
    1 ETP199 ######################################
    System information
    SAP = NW2004s SR3
    Database = Oracle 10.2.0.2
    OS versions = AIX 5.3
    Tp version = 700 Unicode 179
    R3trans version = 700 Unicode 183
    PS.I checked tp connect return code 0 and R3trans u2013s return code 0
    Could you please suggest how to fix this problem?
    Thank you very much
    Jaturong

    Iu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
    Are you still getting the same error after you retry the statistics update?

  • Sapinst import support package 19

    Hi,
    While I am doing import support package 19 though sapinst below error is occuring:
    ERROR 2007-06-15 03:34:44
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-15 03:34:44
    MUT-02041  SDM call of deploySdaList ends with returncode 4. See output of logfile
    /tmp/sapinst_instdir/PATCH/ORA/callSdmViaSapinst.log.
    Lofile error:
    Error: Exception occured during extractSingleFile: /usr
    /sap/GXI/DVEBMGS00/SDM/root/origin/sap.com/tc/eCATTPing/SAP AG/1/6.4019.00.0000.
    20041104140331.0000/eCATTPing.sda (Permission denied)
    Can some one help me in this regard
    Best Regards

    Hello,
    There are a coupel of things I would suggest checking here. From the logs I assuem that you are installing on a Unix system, what user are you calling sapisnt with? Is it the root user? Please also ensure that 777 permissions exist on the directories in question, and that the file itself is not corrumpted.
    Regards,
    David

  • How to deal with delta queue when importing Support Package/Kernel Patch

    Hi,
    From my experience, when importing a Support Package for an installation, the system will issue an error message and get stuck if this Support Package is about to alter the structures used in delta loads.
    But I would like to double with you if there is possible that the support packet which is going to alter structure, but no error message. If so, the delta data will be lost.
    Do we need to clear down the delta queue every time we import support package?
    Anyway, is there anyone have any suggestions or steps regarding this question?
    Many Thanks
    Jonathan

    Hi,
    Delta queues during support package upgrade
    Its always better to drain the delta queues before an upgrade.
    As a standard practice we drain the delta queues by running the IP/ chain multiple times.
    As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
    The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
    V3 collector jobs should be suspended for the duration of the upgrade.
    They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
    See SAP Notes 506694 and 658992 for more details.
    Page 17
    Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
    The SAP BW Service SAPI, which is used for internal and ‘BW to BW’ data mart extraction, is
    upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
    upgrade to avoid any possibility of data loss.
    upgrade preparation and postupgrade checklist
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    /message/3221895#3221895
    OSS notes 328181 and 762951 as a prerequisites.
    Failure to follow the instructions in those notes may probably result in data loss.
    https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
    /thread/804820
    Effect on BW of R/3 Upgrade   
    How To Tackle Upgrades to SAP ERP 6.0
    /people/community.user/blog/2008/03/20/how-to-tackle-upgrades-to-sap-erp-60
    Start with the Why — Not the How — When You Upgrade to SAP ERP 6.0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008dddd1-8775-2a10-ce97-f90b2ded0280
    Rapid SAP NetWeaver 7.0 BI Technical Upgrade
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
     https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2b3a272-0b01-0010-b484-8fc7c068975e
    Hope this helps.
    Thanks,
    JituK

  • Error in Applying Java support packages through JSPM

    Hi All,
    While Applying support packages, Package CAF 7.00 SP 13 is through an error
    help required.
                       For detailed information see the log file of the Deploy Service.
    07/12/05 21:55:26 -  ***********************************************************
    Dec 5, 2007 9:55:26 PM   Info: End of log messages of the target system.
    Dec 5, 2007 9:55:26 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Dec 5, 2007 9:55:26 PM   Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
    Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
         com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Dec 5, 2007 9:55:26 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:28 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:28 PM   Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
    Dec 5, 2007 9:55:28 PM   Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Failed deployment of SDAs:
    development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
    Please, look at error logs above for more information!
    Dec 5, 2007 9:55:28 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:30 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:30 PM   Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
    Dec 5, 2007 9:55:30 PM   Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
    No further description found.
    Dec 5, 2007 9:55:30 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:32 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:32 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    Dec 5, 2007 9:55:32 PM   Error: -
    At least one of the Deployments failed -
    Regards,
    Prashant.

    Hello Prashant.
    Check this supporting SAP note 1010640. It will solve your problem.
    This is typical problem when you upgrade from < SP8 to higher version.
    You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
    It should go with out errors.
    Let us know if this worked.
    *Reward points for helpful answer.
    Regards,
    Prashant P.

  • Import support package SAPKB70015. Is stuck in IMPORT_PROPER phase

    Dear Expert,
    I have some problem when import support package SAPKB70015 at PI System.
    IT had shown as below.
    Main import
    Transport request   : SAPKB70015
    System              : CXI
    tp path             : tp
    Version and release: 372.04.08 700
    sap_dext called with msgnr 4:
          db call info
    function:   db_report_interface
    fcode:      UPDATE_REPORT
    tabname:    TEXT
    len (char): 40
    key:        /OSP/CL_CJS_CONTEXT===========CP
    retcode:    4
    Main import
    End date and time : 20081120021353
    Ended with return code:  ===> 12 <===
    And I checked the transport log,It shown as below.
    4 ETW690 COMMIT "360444" "53156878"
    3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
    4 ETW000   1 entry for TADIR updated  (R3TRCLAS/OSP/CL_CJS_CONTEXT                     ).
    4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP         A replaced.
    4 ETW000  [dev trc     ,00000]  Thu Nov 20 02:13:53 2008                         39924798  39.924798
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => Cannot update a LOB column for more than one row piecewise
    4 ETW000                                                                              85  39.924883
    4 ETW000  [dev trc     ,00000]  sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
    e=REPOTEXT
    4 ETW000                                                                              66  39.924949
    4 ETW000  [dev trc     ,00000]  prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
    4 ETW000                                                                              53  39.925002
    4 ETW000  [dev trc     ,00000]  IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
    0a4220,vda_p=0x111e21a60
    4 ETW000                                                                              58  39.925060
    4 ETW000  [dev trc     ,00000]       lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
    4 ETW000                                                                              48  39.925108
    4 ETW000  [dev trc     ,00000]  OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
    11e222c0
    4 ETW000                                                                              55  39.925163
    4 ETW000  [dev trc     ,00000]       lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
    4 ETW000                                                                              47  39.925210
    4 ETW000  [dev trc     ,00000]  UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
    4 ETW000                                                                              51  39.925261
    4 ETW000  [dev trc     ,00000]  RETURNING "DATA" INTO :A4;                            29  39.925290
    4 ETW000  [dbrepolo    ,00735]  ***LOG BZY=>unexpected return code 2          calling            [dbrepolo#? @ 735]
    4 ETW000                                                                              75  39.925365
    2EETW000 sap_dext called with msgnr "4":
    2EETW000 -
    db call info -
    2EETW000 function:   db_report_interface
    2EETW000 fcode:      UPDATE_REPORT
    2EETW000 tabname:    TEXT
    2EETW000 len (char): 40
    2EETW000 key:        /OSP/CL_CJS_CONTEXT===========CP
    2EETW000 retcode:    4
    1 ETP154 MAIN IMPORT
    1 ETP110 end date and time   : "20081120021353"
    1 ETP111 exit code           : "12"
    1 ETP199 ######################################
    System information
    SAP = NW2004s SR3
    Database          = Oracle 10.2.0.2
    OS versions      = AIX 5.3
    Tp version = 700 Unicode 179
    R3trans version = 700 Unicode 183
    PS.I checked tp connect return code 0 and R3trans u2013s return code 0
    Could you please suggest how to fix this problem?
    Thank you very much
    Jaturong

    Hello Karthik
    I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
    Regards
    RB

  • How to import Support Package 13(SAPKW70013) for SAP NetWeaver 2004s BI

    Hi,
    How to import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013)
    Note no for that is : 1019055.
    Thanks in Adavance,
    Dushyant.

    Hi,
    RTC for BI 7.0 SAP_BW SP 13 is scheduled in CW 21, that is coming week, after that you should be able to download it from service market place.
    @others: Dont get confused about SPS release with SP release. BI has intermediate release which is SP release, SPS is SP-Stack release (which is NetWeaver release).
    SP 12 correspond to SPS 12 which is sceduled CW 21.
    Hope this helps.
    Best Regards,
    Rajani

  • Error occured while importing .der file in R/3 System

    Hi Friends..
    I tried to connect R/3 system with portal through SSO concept.
    for that I have downloaded (.der) file from portal.
    After that I tried to import that file through STRUSTSSO2 transaction in R/3 system, at that time I got
    error message like " Error occured while importing"
    so I can't able to import that (.der) file into R/3 System.
    Please guide me with exact steps.
    What should I do?
    Thanks
    Gowrishankar

    Hi Micheal and raghav thanks for your reply.
    Yes Micheal already we have installed .der file to other client in the same R/3 System
    may be that's why it shows an error?
    so what is the solution for this kind of scenarious?
    Thanks
    Gowrishankar

Maybe you are looking for