Error Handling for JSF!

Hi, i have a third party jar file, and in some code of it, methods are not declared to throw any exception, but actually, in the method, there is a try-catch block, and in the catch block, it does some logging work, and then just throw the exception directly.
then comes the problem, when i am using that code, sometimes exceptions are thrown,but in my code i can not catch that exception directly, as the methods in the classes in the jar file are not declared to throw the exception. So an error page full of stack trace messages is displayed, but i don't want this, for it is rather ugly and useless for client.
So is there some way that i could do some config work or some otherways to direct the page to another page writen by me when errors occur? and maybe i can judge what kind of error happened, and display the proper message for client?
Best Regards:)
Robin

Hello
You are using JSF but then also you are free to use JSP code in your page. You can define the <@ page errorPage="someFile.htm"> as an error page, so it will redirect every time to this page.
I hope this will work for you.
Best of luck!
-Dhanya

Similar Messages

  • Error handling for work item

    Dear All,
         When I trigger my workflow from SWUE,the workflow containers must be populated with agent name.But it is populated only with 'US'.Please suggest.
         On the other hand, when I trigger my workflow from ME21N,the workflow goes into error.The error statement is "Exception occurred - Error handling for work item 000000954797".What is the problem?
        Please suggest the solution for which I will be grateful.
    Thanks and regards,
    S.Suresh

    Dear ,
    I use bus2012 as BOR and event as created.
    When I create purchase order from ME21N,bus2012 is not triggering.Instead FREBUS2012 gets triggered which is a subtype of bus2012.
    At SWETYPV,event linkage is activated only for BUS2012 and there is no entry at SWETYPV for FREBUS2012.
    Though I configured the workflow with start events:BUS2012->created,why FREBUS2012 should trigger my workflow which is not seen in SWETYPV?How to override it?Please suggest.
    There is no start conditions for my workflow.Whenever purchase order is created,this workflow should trigger.
    So,the parameters passed between even to workflow are 
    &_EVT_OBJECT&    ->        &BUS2012&
    &_EVT_CREATOR&   ->     & WFINITIATOR&
    Thanks and regards,
    S.Suresh

  • Error handling for a save button

    hi. how do i get error handling say in a button, and then to give an error to the user, without crashing the whole application. can any one point me to any articles, tried searching , and not finding wxactly what i am looking for. thanks.
    http://startrekcafe.stevesdomain.net http://groups.yahoo.com/groups/JawsOz

    hi. maybe i did not make my self clear. okay, here's how this button works, you have a open dialog button, and a open dialog box, you click the file, and it loads in the data grid. now you click on the save button, and a message says file was saved, need
    try / catch code, to catch this, if the file was not saved, or other errors, then a error friendly message, any code for this. read the article, but need a specific error handler for the save button, like i had for the open dialog file dialog box. any suggestions,
    or links, to look at sample code. thanks.
    http://startrekcafe.stevesdomain.net http://groups.yahoo.com/groups/JawsOz

  • Error handling for RGB values

    Hi
    I am having problems doing error handling for RGB values. I have a Java applet with 3 JTextFields whose values are parsed as int variables and stored as ints. If a value is entered that is not a value between 0 and 255 is entered, the appropriate field/s should be set to an empty string.
    The problem I am having is that I am using try/catch block to try to parse as an int but then it breaks out of execution completely.
    I hope this makes sense and that someone can help.
    Thanks!

    this is because your code is probably inside one giant try catch block, what you need to do is have small ones in places where you do the parsing.
    post code and i can show you how to modify it

  • Option for error handling for DTP, ' no updata, no reporting" and "deactiva

    Hello Gurus,
         option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
    Many Thanks,

    On the Update tab page, specify how you want the system to respond to data records with errors:
                                a.      No update, no reporting (default)
    If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                                b.      Update valid records, no reporting (request red)
    This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                                c.      Update valid records, reporting possible
    Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
    http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
    Hope it helps.
    rgds, Ghuru

  • Error Handling for Outbound IDOC - COSMAS (Cost Center Master)

    Hi,
    I need to trigger a mail to SAP inbox whenever a outbound idoc fails for any reason.
    I know how to do it for inbound or outbound transaction data, but not sure how to do error handling for outbound master data.
    Could one of you help me understand the same.
    Thanks in Advance,
    Vinoth

    Hey Vinoth,
    Do you want decide the recipient of the mail dynamically? am asking because if you give the USER NAME in the partner profile and when ever a IDOC fails a mail will automatically reach the user inbox automatically
    let me know if i answered ur question.
    Thanks,
    Santhosh

  • Latest Error Handling for Dynamic Actions

    Is there any documentation on the Latest Error Handling for Dynamic Actions?

    BillC,
    Interesting that I was looking around for the same thing after seeing a Foreign Key violation in my application.
    I found this article by Patrick Wolf:
    APEX 4.1 – Error Handling Improvements – Part 1
    http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
    I believe you need to be on 4.1 or later though.
    Thanks,
    Joe

  • 3.2 to 4.1 Upgrade - Error Handling for Unavailable Database Links

    Hi,
    I'm having a 3.2 -> 4.1 upgrade issue related to error handling for failed database links.
    I have a conditional Exists button on a page that has a SQL query to linked tables. However, for the 10 minutes every day where the target of the database link is getting a cold backup, the query fails. In the old 3.2 apex I simply got an error inside the region where the button is located but otherwise the page was still visible:
    "Invalid exists/not exists condition: ORA-02068: following severe error from MYDBLINK ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist"
    However, in apex 4.1.0.00.32 I get the following unhandled error, and clicking "OK" takes me to the edit page when logged in as developer.
    i.e., the page can't be run at all while the database links are failing in this one region.
    Error Error processing condition.
    ORA-12518: TNS:listener could not hand off client connection
    Technical Info (only visible for developers):
    is_internal_error: true
    apex_error_code: APEX.CONDITION.UNHANDLED_ERROR
    ora_sqlcode: -12518
    ora_sqlerrm: ORA-12518: TNS:listener could not hand off client connection
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 4
    component.name: Current Alerts
    error_backtrace:
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1041
    ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 687
    ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 272
    General users see this:
    Error Error processing condition.
    ORA-01034: ORACLE not available ORA-02063: preceding line from MYDBLINK
    clicking "OK" takes user to another page, not sure how apex decides which, but not a concern at the moment.
    I've done a search and read the page http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ but the new apex error handling isn't clear to me, and I don't know if the apex_error_handling_example provided on that page would be applicable to this situation.

    Thanks Patrick.
    The PL/SQL Function Body returning boolean condition with:
    begin
        for l_check in (
          SELECT 1
           FROM myview@MYDBLINK
          WHERE ... ) loop
            return true;
        end loop;
        return false;
    exception when others then
        sys.htp.p('Invalid exists/not exists condition: ' || sys.htf.escape_sc(sqlerrm));
        return false;
    end; Resulted in a similar issue:
    Error Error processing condition.
    ORA-04052: error occurred when looking up remote object MYLINKUSER.myview@MYDBLINK
    ORA-00604: error occurred at recursive SQL level 3
    ORA-01033: ORACLE initialization or shutdown in progress
    ORA-02063: preceding line from MYDBLINK
      Technical Info (only visible for developers)
    is_internal_error: true
    apex_error_code: APEX.CONDITION.UNHANDLED_ERROR
    ora_sqlcode: -4052
    ora_sqlerrm: ORA-04052: error occurred when looking up remote object MYLINKUSER.myview@MYDBLINK
    ORA-00604: error occurred at recursive SQL level 3
    ORA-01033: ORACLE initialization or shutdown in progress
    ORA-02063: preceding line from MYDBLINK
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 4
    component.name: Current Alerts
    error_backtrace:
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 904
    ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 588
    ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 148However, I created a view with the same query:
    CREATE OR REPLACE VIEW v_localview (ALERT_1)
    AS
    SELECT 1
      FROM myview@MYDBLINK ...then change the condition to look at the local view:
    begin
        for l_check in (
          select alert_1 from v_localview ) loop
            return true;
        end loop;
        return false;
    exception when others then
        sys.htp.p('Invalid exists/not exists condition: ' || sys.htf.escape_sc(sqlerrm));
        return false;
    end;As a view is simply a query I'm surprised this should make any difference but it now looks similar to the 3.2 error, inside the region, when the linked database gets its morning cold backup, and this is fine:
    Invalid exists/not exists condition: ORA-12518: TNS:listener could not hand off client connection

  • Error handling for importing a file

    Hi, I have only been doing java for 1 semester, and have got terribly stuck on my final assg. I have to import a txt file, and catch any exceptions. I know I am not using the correct method to read the file, but am not sure what the alternatives are. I am getting a compile time..illegal character msg for my Mydata.txt file. Here is my code.
    PS I do have a CatalogueItem class and a bit more to the main class, I have not attached it as I do not want this to be too long.
    /The program reads 10 sets of catalogue data from the Mydata.txt file
    //it prompts the user to use one of the 5 menu options displayed on the screen
    //depending on which option is selected the program displays the data
    //back on the screen.
    import java.awt.*;
    import java.lang.*;
    import java .io.*;
    import java.util.StringTokenizer;
    import java.text.NumberFormat;
    import java.util.Locale;
    //set up a class to call on the constructors from the catalogueitem class
    public class Myassg5
         private static final int MAX = 10; //sets the length to 10(for most exp products)
         private static CatalogueItem[] prodlist; //sets array for product list
         NumberFormat cash = NumberFormat.getCurrencyInstance(new Locale("en","AU"));
         public static void main(String[] args) throws IOException
         CatalogueItem prodlist = new CatalogueItem[10];//sets the length to 10
         {//create Buffered FileStream and initialise to zero
         //use bufferedReader to read in data my Mydata.txt file.
         BufferedReader inFile = null;
         BufferedReader inFile = new BufferedReader(new FileReader(C:\Mydata.txt);
         //print a msg stating the file is loading
         System.out.println("Loading file data from Mydata.txt...10 item(s) OK");
         //initialise the array elments to zero
         for( int a = 0; a < prodlist.length; a++)
         prodlist[a] = 0;
         //if incorrect command lines were passed in display
         //usage msg and quit program
         if(prodlist.length != 1)
              System.out.println("Usage: java assg <Mydata.txt>");
              System.exit(0);
         try
              inFile = new BufferedReader(new FileReader(args[0]));
         //display the error and quit if the file is not found
         catch(FileNotFoundException e)
              System.err.println("File not found--program will terminate");
              System.exit(1);
         //display error msg and quit if there is a problem
         //when opening the file
         catch(IOException e)
              System.err.println("Error opening file--program will terminate")
              System.exit(1);
         //repeat this error handling process as often as neccessary
         boolean go = true;
         while (go)
         //get a line of data from the file
         boolean valid = false;
         CatalogueItem prodlist =-1;
         while(!valid)
         //read the line of text from the file
         String temp = null;
         try
              temp = inFile.readLine();
         //display error msg and quit if there is a problem
         //reading from the file
         catch (IOException e)
              System.err.println("error reading from the file--program will terminate");
         System.exit(1);
         //if the string is null the EOF has been reached
         if(temp ==null)
              valid = true;
              go = false;
         //close the file stream
         try
              inFile.close();
         //display error if there was a problem closing the file
         catch (IOException e)
              System.err.println("error closing data file")
         

    I think the problem is the "\M" in "C:\Mydata.txt". It is trying to make that into an escape character. Use "C:\\Mydata.txt" or "C:/Mydata.txt" instead.
    The logic here is odd. You open a BufferedReader for Mydata.txt, then you trash it without closing it and create another BufferedReader for whatever command line argument the user passes in. Which reader do you want to keep?

  • Error handling for distributed cache synchronization

    Hello,
    Can somebody explain to me how the error handling works for the distributed cache synchronization ?
    Say I have four nodes of a weblogic cluster and 4 different sessions on each one of those nodes.
    On Node A an update happens on object B. This update is going to be propogated to all the other nodes B, C, D. But for some reason the connection between node A and node B is lost.
    In the following xml
    <cache-synchronization-manager>
    <clustering-service>...</clustering-service>
    <should-remove-connection-on-error>true</should-remove-connection-on-error>
    If I set this to true does this mean that the Toplink will stop sending updates from node A to node B ? I presume all of this is transparent. In order to handle any errors I do not have to write any code to capture this kind of error .
    Is that correct ?
    Aswin.

    This "should-remove-connection-on-error" option mainly applies to RMI or RMI_IIOP cache synchronization. If you use JMS for cache synchronization, then connectivity and error handling is provided by the JMS service.
    For RMI, when this is set to true (which is the default) if a communication exception occurs in sending the cache synchronization to a server, that server will be removed and no longer synchronized with. The assumption is that the server has gone down, and when it comes back up it will rejoin the cluster and reconnect to this server and resume synchronization. Since it will have an empty cache when it starts back up, it will not have missed anything.
    You do not have to perform any error handling, however if you wish to handle cache synchronization errors you can use a TopLink Session ExceptionHandler. Any cache synchronization errors will be sent to the session's exception handler and allow it to handle the error or be notified of the error. Any errors will also be logged to the TopLink session's log.

  • Error handling for master data with direct update

    Hi guys,
    For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
    But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
    Many thanks,
    / Christian

    Hi Christian -
    Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
    second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
    hope it helps
    regards
    Vikash

  • Error Handling for BAPI MB_COUNT_POST_WITHOUT_INV_DOC for MI10 Transaction

    Hi,
    Can any one suggest me, how to handle the errors for the BAPI MB_COUNT_POST_WITHOUT_INV_DOC, because this bapi does not have any return table for errors handling? And also suggest any other BAPI which fits for MI10 transaction.
    <removed by moderator>
    Thanks&Regards,
    Damuan.
    Edited by: Thomas Zloch on Feb 2, 2012

    Hi Dear,
    Your answer is very helpful, thanks..!!
    But when  i am testing with the EIKPF structure, neither error is populating in EIKPF  nor the records are  posting in MI10. Could you please guess what would be the problem?
    Below are the fields that i am passing through this BAPI
    1)Document date 2)count date 3)plant 4)storage location 5)item number 6)material code 7) entry quantity
    Thanks&Regards,
    Damuan.

  • Error Handling for Dynamic Actions (4.1.1)

    Hello
    I'm trying to create a function to handle all possible errors but the errors generated by DA are not being caught.
    Is it possible to caught them? How?
    My function is based in:
    http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_error.htm#autoId4
    and I'm making my tests in apex.oracle.com
    Thanks

    Hi,
    there is no APEX JS function which you could use to intercept the error display. But you might be able to overwrite the "window.alert" JS function which is used to show the error with your own implementation. This function could check the text for some patterns and then decide what to show to the user. I haven't tried this but
    var originalAlert = window.alert;
    window.alert = function( pMessage ) {
      if ( pMessage ... some check comes here ... ) {
        originalAlert( "My new message" );
      } else {
        originalAlert( pMessage );
    };might work.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Error Handling for Background/Update Tasks (Transfer Order creation) - How?

    Hi,
    I have a standard process for creating a Transfer Order and 2 user-exits that I have implemented.
    The user exits are used to transfer information during Transfer Order creation.
    However, the user-exits also check data in table TVARV and other. As such, error handling needs to be implemented, since the T.O. might or might not go through, depending on data validation and related.
    However, the user-exits are implemented during creation, which is an update task that runs in the background. This makes it impossible to output any information or error messages.
    What else can be done in regards to outputting a message, since the user will need to see some sort of message that the process failed, that the T.O. didnu2019t confirm?  Can an SAP inbox message be created and how?
    Please help.
    Thank You,
    John

    Hi,
         Please check the following link for all the function modules and user exits on TOs.
    http://help.sap.com/saphelp_erp2005/helpdata/EN/c6/f83a294afa11d182b90000e829fbfe/content.htm
    Reward points if it was helpful.
    Regards
    Abhishek
    Edited by: Abhishek Raj on May 29, 2008 10:20 AM

  • Error handler for event based messaging framework

    I've been very interested in using the event based messaging framework (described here http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/td-p...) for my next large application.
    My main concern is the fact that it seems like typos would be very difficult to debug since you need to ignore unknown commands to make this system work.
    To solve this problem I've been considering the idea of having a single message error handler VI which will store all valid commands and check all sent commands to see if they are valid.  Each VI would send out a register message on startup with their name and all messages they can send and receive.  The message error handler would store these and then check all future messages to be sure it is a valid message, throwing an error if it is not.
    My basic problem is this: for this to work the message error handler VI would have to be started before any messages are sent so that it can capture all the register events.  If this is a VI that will be continuously running the entire application how can I ensure it starts first since I cannot wait for it to complete? (I.e. the usual method of running an error out wire or using a sequence structure will not work since everything will then wait for it to complete which will not happen until the program is ready to shut down)
    I'm assuming the answer might be to use an asynchronous call but I'm not very familiar with this method.  
    Any help is appreciated.  Thanks. 

    Could you just use the error handler as a subVI inside a case structure that is only called when you have new message to be checked? I'm not sure I understood the exact functionality you are looking for, so sorry if this does not apply.
    Zach P.
    Product Support Engineer | LabVIEW R&D | National Instruments

Maybe you are looking for

  • Cant get 2.1 to work on Audigy 2

    I could only get 2 speaker to work but not 2., and in the speaker setting it only show 2, 4, 5., 6., 7. speaker there is no 2. and if i try to select any of them it just pop back to 2 speaker. Im using Digital Optical out. Can some help me out. Thank

  • Not finding an entry in SCOT or SOST

    Hello friends, I am working with Reporting Agent to send mails if an exception is triggered in a query. I scheduled my scheduling package as Immediate and check job overview  SM37 => it finishes successfully. However the mail is not sent to any of th

  • Can not download crystal report 2008 Service Pack 1 Version 12.1.0.892

    I can't download crystal 2008 sp1 from https://smpdl.sap-ag.de/~sapidp/012002523100006555792009E/cr2008win_sp1.exe and I got follow message Error Message - ObjectID not existant What happened? ObjectID not found in R/3 What can you do? Check your Obj

  • GRC 10 - HR Triggers

    Dear Experts, We have configured SAP HR Triggers to terminate the user and the termination date is taken as BEGDA ( Start Date of termination) from PA0000 table. So whenever user is terminated, the validity of user account is set to (BEGDA date - 1).

  • Error in  PO release strategy

    Hi everyone,    I am facing an error in PO release strategy ie;  '  purchasing document (pdocno)  not subject to release strategey'. pls help me in solving this. Thanks, Archana.