Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Similar Messages

IR: ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier

Hi everyone,
has anyone else had this error which has been driving me round the bend during the last three days?
I have an interactive report which used to work fine.
Now it happens (when the page loads/a filter is en- or disabled) that - from time to time, but unpredictable - I receive
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
The report is based on a table function.
I will try to set up a testcase and post the link here, but so far I haven't managed to force the error to occur.
But maybe someone else has already bumped into this kind of error? I would be grateful for any hints!
Best regards,
Sabine
Application Express 4.1.0.00.32
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

Hi Jari,
I changed the type definition (the return type of the table function) and extended the select list in the source of the IR.
I do not use 'select *' but reference every column explicitly. So APEX easked me whether to add the new column.
I also tried deleting in recreating the region, but no luck.
Any more ideas?
Best regards,
Sabine

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

Solved: ORA-20001: get_dbms_sql_cursor error ORA-01445: cannot select ROWID

I got an error, googled it and couldn't find a good answer. Joe Fuda helped me to fix the problem. Here is the answer for future google results.
Error:
ORA-20001: get_dbms_sql_cursor error ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table
Query that triggered the error:
SELECT
p.rowid
, p.product_id
, p.product_type
, p.product_name
, p.product_description
FROM
product p
, link_release_product rp
WHERE
rp.release_id = 1
AND
p.product_id = rp.product_id
This is casued by the keyword "rowid".
The same error occurs if 'p.rowid' is replaced with 'p."ROWID"'.
You can replicate this error in SQL Command by adding wrapping the query with 'select * from ( [the query] )'
Fix:
Add an alias to 'p.rowid' so the query is now like:
SELECT
p.rowid product_rowid
, p.product_id
, p.product_type
Reason:
Unclear, it might have something to do with how APEX does pagination.

ok, found the answer... it has to do with the single row view issue addressed in this thread... ORA-01446 on Interactive query
(sorry if there's a better way to link to other threads in this forum).

ERROR ORA-00942: table or view does not exist

Hi:
I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
declare
gr sdo_georaster;
begin
select image into gr from gis.RasterImages where geoid=1 for update;
sdo_geor.generatePyramid(gr,'resampling=NN');
update gis.RasterImages set image=gr where geoid=1;
commit;
end;
I trying to create a pyramid,but the error appeared:
ERROR at line 1:
ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
ORA-06512: 在 line 5
I don't know why?
Anyone can help me?
Thanks.

Hi,
I think you are executing the select statement for schema X and the table is in the schema srnr.
And schema X is not having select privilege on the table 'students' present in schema srnr.
Goto schema srnr.
Execute the following statement:
grant select on students to X;
This will give schema X the privilege to query the table students present in srnr.
Regards,
Anupama

Scheduling error causing - ORA-00942: table or view does not exist

Hello
I have the following problem, I created an scenario that its supposed to run every 1 hour, it has an interface that moves an amount of records from one table to another (the amount of records is not fixed it changes). The problem arises when the amount of data to move is so big that the hour between executions is not enough and the scenario is still running when a second execution of the same scenario starts to run (as scheduled), so in the interface when the second process is trying to run the loading step it fails and I got the error ODI-1228 Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exists. So the scenario fails and it logs this error. I think the error is due to the table in stage being locked by the first execution of the scenario.
I don't want to change the amount of time between executions because it is usually enough, I just want to avoid the execution of a scenario when there is another execution of the same scenario still running, is there any way to do this?.
Thanks
LJ

Hello
Thanks for your answer, I already have the "Interval between repetitions" property set to 1 hour, but when one execution takes more than one hour the scheduler starts another and I have 2 processes accessing the same table and it is when I have a concurrence error on the staging table.
How can I ensure that I wont have two or more executions of the same scenario running at the same time?.
Thanks,
LJ

SQL Error: ORA-00942: table or view does not exist + CX_RS_SQL_ERROR

HI ,
we are facing below issue while activating info object xxxxxxxx
" SQL Error: ORA-00942: table or view does not exist " and " CX_RS_SQL_ERROR "
can any one help us out to resolve this issue.
Thanks,
EDK......

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Error(20,22): PL/SQL: ORA-00942: table or view does not exist

I am getting currently getting an error when I try and insert into a table from a different schema from my Stored Procedure:
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am explicitly calling the table with the schema name infront i.e.
INSERT INTO SAPSR3.ZTREC_NAME_TYPE
MASTER_ID,
NAME_TYPE,
FAMILY_NAME,
FIRST_NAME,
MIDDLE_NAME,
TITLE
VALUES
In_MasterID,
In_NameType,
In_FamilyName,
In_FirstName,
In_MiddleName,
In_Title
I only get this error when I try and compile my stored procedure. If I try this insert not within a stored procedure (i.e. a blank script) it works perfectly.
Can anyone tell me what Im doing wrong?
Thanks.

Hi,
It sounds like you (the procedure owner) have privileges on that table only through a role.
Roles don't count in stored procedures created with AUTHID OWNER (which is the default).
Either
(1) Have user SAPSR3 grant the necessary privileges directly to you (or to PUBLIC), or
(2) change the procedure so that it runs with the caller's privileges, by adding AUTHID CURRENT_USER after the argument list but before the keyword IS (os AS) like this:
CREATE OR REPLACE PROCEDURE foo
( x IN NUMBER
AUTHID CURRENT_USER
IS ...

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

Error while deploying map: ORA-00942 Table or view does not exist

Hi OWB experts,
I'm having yet another problem with OWB, this time when I try to deploy a mapping I get this error:
ORA-06550: line 59, column 3:
PL/SQL: ORA-00942: table or view does not exist
DIM_01_ESTCON_MAP
ORA-06550: line 93, column 3:
PL/SQL: SQL Statement ignored
If I open the package that OWB created I see the errors:
CURSOR "DEDUP_SRC_0_IN2_c" IS
SELECT
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_ID" "ESTADOCONEXION_ID",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_COD_ESTCON" "ESTADOCONEXION_COD_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_DESC_ESTCON" "ESTADOCONEXION_DESC_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."STANDARD_TOTAL_COD_TTL" "STANDARD_TOTAL_COD_TTL"
FROM
(SELECT
DISTINCT
"DIM_01_ESTCON_MAP"."GET_CONST_CA_0_ESTADOCO" "ESTADOCONEXION_ID",
"ESTADOS"."ESTADO" "ESTADOCONEXION_COD_ESTCON",
"ESTADOS"."DESC_EST" "ESTADOCONEXION_DESC_ESTCON",
"DIM_01_ESTCON_MAP"."GET_TOTAL_C_0_TTLID" "STANDARD_TOTAL_COD_TTL"
FROM
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
WHERE
( estado LIKE 'EC%' )) "DEDUP_INPUT_SUBQUERY2$1";
Where AYADEV_LOCATION points to the module/schema/location where my source data is.
Now, I have defined three modules:
SOURCE, where I defined the tables and other objects from the original database (source data)
STAGE, where I am performing all the transformations; here I defined all the maps
TARGET, this holds the dimensions and fact tables.
Now all three modules point to different databases. The dblink for AYADEV_LOCATION has been created and shouldn't present any problems. The username that I'm using to log on to the source database is current and I can connect to it through SQL+ or any other program (TOAD, SQLDeveloper).
What could be happening here? I'm using OWB 10g R2, with Oracle DB 10g R2.
I'd really appreciate any help you could provide.
Best Regards,
--Osvaldo
[osantos]

Hi,
I'm still having problems but I found out why these tables are returning errors. The username I've been given by the DBA to connect to the database is CONSULTA, but this user is only for querying purposes, the actual objects reside on a differente schema, of course, which is PROD. So the line:
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
raises an exception because the table ESTADOS is not located on that schema, but on PROD. If I query the table from SQL Plus with:
SELECT *
FROM [email protected]@AYADEV_LOCATION
then there's no problem at all.
Why is this? How do I instruct OWB to point to the correct schema or to avoind fully qualifying the table name?
Please help me, I'm kind of confused here.
Best Regards,
--oswaldo.
[osantos]

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

Process chain failure SQL ERROR 942 ORA-00942:table or view does not exist

HI all,
We have a proces chain with 'ceate index' process type and got failed with an error as follows......
SQL ERROR 942 ORA-00942:table or view does not exist
Plz can anyone give solution for this error.
SATISH.

Hey Satish,
Please refer to this thread:
BRCONNECT fails with SQL error -942 at location ora_vers_get-1
I am sure the solution there should solve your problem. There are various other discussions about this error in the forum, I suggest you look through them for better understanding and additional material.
Cheers!!!
Manu.

Backup report function returns: ORA-00942: table or view does not exist

Hello All,
I recently switched over from control file RMAN to recovery catalog. I logged into the 11g database control, executed a full backup and all went well. However, I just noticed that after I click on 'Backup Report' in database control (enterprise manager) I get the following error message: " java.sql.SQLException: ORA-00942: table or view does not exist"
I was able to view backup reports prior to switching over to recover catalog. What am I missing or what is missing, sort to speak?
Thanks all !
-Ron

Thanks for the reply Werner. I did try it as 'SYS' but no luck. Strange...This was a new enterprise manager - DB control and the backup reprt function was working prior to using the recover catalog. Anthing in the recovery catalog database that may be missing?
Rob..

How to handle ORA-00942: table or view does not exist

Hii All,
I'm trying to drop a table dynamically irrespective of its existence in a procedure. Its working fine when table exists but when table doesn't exist I'm facing following error
ORA-00942: table or view does not existI made use of pragma exception_init and modified my code as below
Create or replace Procedure sp_FSASA_FEEDUPLOAD_process
           p_test_dir               in     varchar2,
           p_feed_file_name     in     varchar2
is
          l_exttable_str varchar2(32000) ;
          l_log_file constant varchar2(200) := 'logfile_rgh.log';
          l_table_doesnt_exist Exception;
          pragma exception_init(l_table_doesnt_exist,-00492);
Begin
          Begin
               execute immediate 'drop table FSASA_FEEDUPLOAD_EXT purge' ;
          Exception
                    when l_table_doesnt_exist then
                         null;
          End;
          l_exttable_str := 'Create table FSASA_FEEDUPLOAD_EXT ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' Category_No                    varchar2(1), ';
          l_exttable_str := l_exttable_str||' Financial_Category          varchar2(300), ';
          l_exttable_str := l_exttable_str||' GFCID                         number, ';
          l_exttable_str := l_exttable_str||' Balance                         number(34,14), ';
          l_exttable_str := l_exttable_str||' Refernce_no                    varchar2(20), ';
          l_exttable_str := l_exttable_str||' Account_no                    varchar2(20), ';
          l_exttable_str := l_exttable_str||' ce_trans_id                    varchar2(20) ';
          l_exttable_str := l_exttable_str||' ) ';
          l_exttable_str := l_exttable_str||' Organization external ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' type                    oracle_loader ';
          l_exttable_str := l_exttable_str||' default directory      '||p_test_dir;
          l_exttable_str := l_exttable_str||' Access parameters ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' records delimited by newline ';
          l_exttable_str := l_exttable_str||'BADFILE '||q'[']'||p_test_dir||q'[']'||':'||q'[']'||'feed.bad '||q'[']' ;
          l_exttable_str := l_exttable_str||'LOGFILE '||q'[']'||p_test_dir||q'[']'||':'||q'[']'||':feed.log '||q'[']' ;
          l_exttable_str := l_exttable_str||q'[FIELDS TERMINATED BY X'09']';
          l_exttable_str := l_exttable_str||' missing field values are null ';
          l_exttable_str := l_exttable_str||')location('||q'[']'||p_feed_file_name||q'[']';
          l_exttable_str := l_exttable_str||')' ;
          l_exttable_str := l_exttable_str||' )Reject limit unlimited ';
          dbg_print(l_log_file,'l_exttable_str : '||l_exttable_str);
          execute immediate l_exttable_str;
End;But still I'm unable to get rid of it. Pls help me.
1)I need to drop it as I need to immediately create table with different file name and from different path.
2)The last thing I don't like to do is to check the table name in USER_OBJECTS and then drop.
3)Also suggest me whether creating an external table dynamically is correct approach or not.
4)Till now we were using utl_file for reading feed file but I'm much interested in using EXTERNAL TABLE concept.
5)As the filename and path gets changed I need to create my external table at runtime.
please suggest me whether I can alter my filename and path at runtime

You will need to use WHEN OTHERS EXCEPTION handler which is not a good idea to do so if you dont handle the same approprialtly then the exception would go un-noticed:
SQL> ed
Wrote file afiedt.buf
1 begin
2 execute immediate 'drop table my_Test';
3 exception
4 when others then
5 dbms_output.put_line(SQLCODE||SQLERRM);
6* end;
SQL> /
-942ORA-00942: table or view does not exist
PL/SQL procedure successfully completed.
SQL>

PL/SQL: ORA-00942: table or view does not exist

Hi
i have logged into my schema and trying to access the database "DAD" which has the table name "SCHOOL"
i wrote a function which should give me new_sno when i give it the old_sno
and i have this errors , pls help
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
NEW_SNO Number:=0;
BEGIN
SELECT new_sno AS NEW_SNO
FROM DAD.SCHOOL
WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN NEW_SNO;
END ORIG_SN;
Warning: Function created with compilation errors.
Errors for FUNCTION ORIG_SN:
LINE/COL ERROR
5/1 PL/SQL: SQL Statement ignored
6/15 PL/SQL: ORA-00942: table or view does not exist
Thanks in advance ..

Try this,
CREATE VIEW SCHOOL_VIEW AS SELECT * FROM DAD.SCHOOL;and then change your function like
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
my_new_sno Number:=0;
BEGIN
SELECT new_sno INTO my_new_sno FROM SCHOOL_VIEW WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN my_new_sno;
END ORIG_SN;and see if it is getting created without any errors.
-Arun
Edited by: Arunkumar Ramamoorthy on Aug 15, 2009 1:56 AM

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Similar Messages

Maybe you are looking for