Error importing Word form - Designer 8.0

I am getting the following error using Live Cycle Designer Designer 8.0:
Conversion Error: 1766. Running: 'c:\Program Files\Adobe\Acrobat 8.0\Designer 8.0\convertword.exe'.
I am trying to import a Word 2003 form. The process starts and almost immediatly throws the error. I also use Windows XP. I have searched extensively on the Internet and can not find out anything about this error. Can anyone help?

I am getting a Conversion Error 1766 when I try to import a word document into Livecycle Designer 8
Can any one help?

Similar Messages

Error while Opening Forms Designer - File fmrNLw.res

Hi,
installed Oracle9i DS version 9.0.2
When opening Forms designer it gives me an error with the file C:\oracle\ora91DEV\forms90\formNLw.res
Any suggestions.
Thanks
Reto

Hi sandeep;
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.Please check below and see its helpful:
Error Dld.So: Unsatisfied Code Symbol 'Nnftboot' Signal 9 When Running Reports Concurrent Requests [ID 560287.1]
All Concurrent Requests End With Signal 9 Termination Error [ID 452714.1]
Also check Apache log files for more details
What is post installation task after installing r12?You can follow Recomended R12 patches On Metalink
Not able to execute .env file with owner and privileges, why?How you are trying to execute?
How to get r12 original media from oracle? You can log Sr for media or you can contact wiht your oracle local office
Regard
Helios

Error importing 9i forms in TranslationHub

I am using TranslationHub v 9.0.4.0 and trying to import some existing 9i forms (9.0.4.0.19). I am getting the following error:
...This filter supports 6i Forms only...
Can't TranslationHub be used for version 9i forms? Is there some way to reset the filter?
Thanks. Tracy

Tracy,
supporting Forms 6i in TH is a new feature in 9.0.4 but it wasn't supposed to block 9i files ;-)
There is a poplist called "Files of type"in the import dialog for loading the fmb files. Set its value to "Oracle Forms9i files", then proceed.
Frank

Importing Word 2010 Developer Dropdown fields

I have been trying to import a form designed in MS Word 2010 with tabled containing Word Developer dropdown fields into LiveCycle Designer ES3. My OS is Windows 7.
The process always fails.
The importing Word Document begins with Converting Tables and within a few seconds i receive the message "Adobe LiveCycle Designer Word Import Filter has stopped working. A problem caused the program to stop working correctly. Please close the program."
There are several dropdown fields in the Word document a few with 30-40 options to select from. Any assistance would be greatly appreciated as the time required to recreate the fields in LiveCycle would take at least a full day.

Hi Markus,
Could you tell me how did you go to "Layout" properties in step 6?
Max Meng
TechNet Community Support

Adobe Forms Designed

Hi All,
I need to develop Adobe forms. When I go to Layout editor using transaction SFP, it gives me an error that Adobe Forms designer needs to be installed on desktop. I have SAP GUI installed locally on my machine and probably need to install Adobe Forms designer locally on my machine. Does anyone know where I can download this software from? The one available on service.sap.com is for the server not for the desktop.
Any ideas where I can get it from?
Thank in advance.

Hi,
you need to install Adobe Lifecycle Designer and install it on your desktop. You can download it from service.sap.com Check FAQs of interactive forms
https://www.sdn.sap.com/irj/sdn/adobe?rid=/library/uuid/2a8a0a37-0301-0010-f794-aecd1bb426e0#q-4
Cheers

RH8 error: Can't import word document or PDf

I just upgraded from RH7 to RH8. I am running Win7 64bit. I also opened RH HTML, which is what I used in RH7. I have a relative small project and I am trying to import a new word document into the current project. I am now trying to upload a word document. When I first open the current project, RH8 asked me to convert to new format and I clicked yes. Here are my steps to upload a word document:
click on file
Click on Import Word Doc (I've tried Microsoft Word 2010, Microsoft Word 2007, Adobe PDF 9)
The Content Setting popup comes up; I've clicked Next.
Then clicked Finished.
Then an error comes with Word:
If I do a pdf: I get this error:
Thank you for any help you can give.

Hey,
Sorry for the delay in response. We would like you to kindly verify a few things:
Are you facing the issue consistently with any word doc you try to import?
Is this browser specific? Please try the same with any browser other than the one you have already tried with. If so kindly report the browser and its version info
Is this system specific? If yes please include the information of the OS and it's version.Have you tried the same from a different machine.
The flash player version you are currently using?
Hope these n questions don't seem overwhelming but this would be really helpful for us in isolating the issue. Thanks for the patience.
Regarding your other question: All the following documents are free form documents as of now , with no special formatting:
Logline
Character-bio
Pitch
Research
Summary
Synopsis
Other document
Do you suggest some standard formatting for these?
Your suggestions are welcome. They aid us in getting better
Thanks,
Adobe Story Team

Error: Oracle Forms Designer has stopped working

I have read a lot of different responses regarding this and related issues but none of the answers seem to be relative to my specific problem. Here is what I have done so far:
a. I just finished loading Oracle 11g 64x enterprise on my laptop running windows 7. It loaded correctly and I was able to import my 10g data dump and set up my schema.
b. I then installed the Oracle development suite: ds_windows_x86_101202_disk1 and disk2. There were some minor issues regarding compatibility but following the advise of one post, I checked the blocks in question and the software loaded fine.
c. I also attempted to install the p5969392_10123_WINNT.zip file but it gave a message indicating that no updates applied. (I am not sure if this is the correct patch or not?)
d. I also had to download and install the Sun SDK, v6.18.
e. I also updated the ORACLE paths in the default.env and registry entries and tried different urls in the runtime preference block. Nothing helped and I stayed with the default.
Oracle Forms seems to startup correctly and I am able to connect to the database with no problem. Although I did not build a new form completely, it appears that this would be no problem.
The problem:
The problem is that when I attempt to open a form that was previously developed in 10g on XP, I immediately get the "Oracle Forms Designer has stopped working" error and Forms Builder shuts down. I get the same error whether I attempt to open a library, menu, or form.
I have tried changing the compatibility mode from XP, service pack 3 (the default after install) to XP, service pack 2 but it made no difference.
If anyone has been able to work through this issue, please let me know how. Thanks

Gauthier Ooms wrote:
We've had similar problems in the past, but found a working solution (using this + other forums):
1. Install Oracle DevSuite 10.1.2.0.2
2. Install Patchset 5983622 to upgrade DevSuite to version 10.1.2.3 (this upgrade is needed in order to do step 3)
3. Install Patchset 7047034 to fix the crashing problem in the Forms Builder. (installation instructions are provided in the patchset)Issue no 3
from Patchset 7047034 readme file..
3.1 Platforms and Components for Patch 7047034 for Oracle Database Release 10.1.0.5How this patchset goes with the form Builder?
But according to THIS link.. It works ;)
Hamid

RH8 & Office 2010 import Word file error/failure

We are running RH8.02.208 on XP. We just upgraded to Office 2010. When we try to use file/import Word Document we are getting this error message
Word is installed correctly, and this kills the process.
Does anyone have an idea why we have hit this solid brick wall? And how to get around it? Thank you!!!

Hi Teri
Sorry, but Jeff is correct. Only RoboHelp 9 works with Office 2010. No patch I'm afraid.
I guess if enough folks screamed at Adobe about it one might emerge, but I'd personally not be holding my breath.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Import word files in InDesign but only Form Text or selected styles

Hi Guys,
I have this magazine I design a few times a year and the articles are sent to me as word-files with tables they have to fill in in order to know who the author is, what the title will be etc.
I would like to find a way to easily import the content of their articles etc. in Indesign and I found out that importing Word files is simple as goodbye. Me happy!
But now I constantly have to copy-paste their article text out of the table and paste it elsewhere in the InDesign file, so I thought: isn't there a possibility to, while importing the word file, select what styles should be imported (so that the instructions I put in the template for their word articles for instance won't be put into the InDesign file but only the forms they fill in) or can I setup the importing of it to only import the form field text (if the word file would be set up as a form with protected items fields they can fill in?).
Many thanks!
Bob

I am using indesign CS2 and i'm trying to import a Word document into a new chapter for a book i'm laying out. it's about 30 pages, but there are at least 80 foot notes. i'm able to get about 1/2 of the document with the footnotes to flow correctly, then EVERYTHING disappears. the only way i've been able to get the remaining text to appear is by adding characters to the text. i'll hit "vvvvvvvvvvvv" a bunch of times and "magically" a little chunk of text and it's footnotes appears. then the ole disappearing act happens. so i do it again. i'm able to get all the text to appear finally, but when i delete the "vvvvvvvvvv" from the places i inserted them, the text disappears again. i have no idea why this is happening or how to fix it. any ideas?
thanks so much,
travis

Error on Importing Word document into RH7

I am attempting to import Word docs into RoboHelp7. The first several documents are imported and saved into the project without incident. However, one file causes an error: "An error occurred while trying to save data to : <RH project name> <5>. The same error occurs each time I attempt to import this particular file; the error message will not disappear when I click on OK and whole project has to be closed. Thank you.

Colum,
Thank you for your prompt response. I tried importing sections of the word document as you suggested, but I was not able to isolate the error. I confess that after repeated errors and shutdowns, I discontinued this troubleshooting, lest it cause any damage to the original project files.
Instead, I opened a new project, and imported the Word doc into that project. Then I imported these HTML files into my main project. It was not graceful, but the end result is good, with all the links and formatting preserved.
As other Word docs have since been imported into this project without incident, perhaps it was a fluke/bug in this one document.
I appreciate your help in resolving the situation.
Thank you.
Mary Lyons
Knowledge Manager
Phone: 309.751.6179
This e-mail and any attachments may contain privileged and/or confidential information. This e-mail is intended solely for the use of the intended recipient. If you are not the intended recipient, you are hereby notified that any copying, distribution, dissemination or action taken in relation to the contents of this e-mail and any of its attachments is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original e-mail and any attachments and destroy any copies.

Import Word 2007 Form check boxes undefined

Any one have any idea on how to get the forms wizard to import the field property names for check boxes in an Adobe form?
I have a Word 2007 form which I have tried saving as a .doc, .dot, dotm, .docx and no matter what format I choose, I cannot get the check box fields to import. I used the legacy checkbox field under the developer ribbon in Word 2007 to create the check boxes. I have tried to import with protection on the word form enabled and stopped but it doesn't make a difference. The check box fields come across fine but the name and the text fields both say undefined rather then display the field name given in Word. I am using Adobe 9 pro. I have checked my Adobe preferences in Word and made sure all the boxes were checked for converting bookmarks but it still did not make a difference. The text fields are importing fine with the property field names.
Here is an example:
I have a yes check box that is labeled StorageY and a no checkbox labeled StorageN for the properties in Word. I then went to the form wizard in Adobe 9 and selected start with existing form and selected the fillable word form I created with the check boxes. I imported it and the check box properties say Undefined for both storageY and storageN. There are about 60 check boxes in the document and I don't want to retype them every time in Adobe when the word form is updated and has to be conveted again.
I sure hope there is a solution.
Thanks.

Thanks for the information but I respectfully disagree with "there is no import". If you open Adobe Acrobat
9 pro and go to Forms, Start Forms Wizard, select An Existing electronic document and click on Next. Select "import" a file from file system and browse for the word document and click on Next.
Using this method not only runs the automatic field recognition you were referring to, it also brings in all the word form field text and formats with the exception of the check boxes. My only guess is the problem has something to do specifically with the check box fields as it does bring over the radio button text. A lot less work to keep the form updated. It rocks. You should try it some time.
Word 2007 pdf writer does the same thing as the openoffice.org but neither bring across the form field info. They just create a starting point and you would have to use the method you described above to create the fillable form.

New! Import and Export Form Design Files

You can now export your form design to a Design File . You or other users can import the Design file and create a new form file from it.
Use Cases / Benefits
You can share your designs as templates for others to easily re-use
You can create corporate branded form templates that can be used by your company's employees
You can archive your form designs locally for later use
How It Works
To export a design file open a form file, go to the Design tab and select “Export Design File…” from File menu. The file extension of the exported Design File will be ".FCDT" - FormsCentral Design Template.
To import a design file go to the “My Forms” dashboard and select “Import Design File…” from File menu. Select the desired .FCDT file.
NOTE: The FCDT file contains the form Design only – it does not contain options, responses or summary reports.
This feature is availabe to free and paid users of FormsCentral.
Please send us your feedback on this feature. Enjoy!

Hi
It states that you can save your design and open it "This feature is availabe to free and paid users of FormsCentral" but it is greyed out on the free version. Will not let me import design I created. I had issues with the first design and tried to redesign and ended up with more issues that combined the first design with the second design.
Can someone assist me with this, please,
Thank you for your time and consideration,
L.McD

Error when importing Word documents

Hallo
I'm using RoboHelp 8 from the Technical Communication Suite.
When I try to import a doc/docx file for my HTML help I get the message: 'The Import Word Document Wizard cannot locate a supported version of Microsoft Word. Please install Microsoft Word 2000 or newer.'
Actually I have Microsoft Word 2010 installed in its default path.
Do I have to set some particular options? Some days ago I had my PC replaced with a new one and I had to reinstall all of my programs. I think I've missed some settings.
Thank you

Strange
I was working with Office 2010 and RH8 almost without problems with my old PC. Maybe the colleagues from our EDP department have installed a different version of MS Word (a newer service pack?).
I'll try to modify the registry as suggested in http://forums.adobe.com/message/2991411
thank you

XML Parsing error: not well-formed (invalid token) (error code 4) --- Urgent Help Needed!

Hi all, what im doing now is im trying to create a database connection my my MS SQL 2005 database. I created a data source and went to my Adobe Lifecycle Designer 7.1, i created a new data connection, selected OLEDB and created the connection string using the build function.
Ok, now the problem is, after creating the new data connection and i click on the preview tab, i will receive the error stated above.
'XML Parsing error: not well-formed (invalid token) (error code 4), line 444, column 1 of file'
Does anyone know why am i receiving this error and how do i go about solving this?
I need this database connection to pre-fill my form when the user downloads the form =(

I have a vital form that clients fill out, which is passed to many people in the company along the workflow. The form is a Planner and we have in the following PDF, Word Doc..
Well before, the Planner.pdf was originally created in Word, since most people have access to Word.. but evolved to a PDF form created from the Word Doc via Adobe LiveCycle Designer 8.0 w/ User Rights enabled so that the form could be filled out and saved using Adobe Reader.. which was a step better than Word.. being that it is free. But this needed to be easier and more to the point b/c some clients don't particularly like installing the latest version of Reader, even if you provide them the link. Nor do they like saving the form, filling the form, and attaching the form to send back.
My goal is to have the client fill an HTML version of the form, submit and be done with it, but everyone in the workflow be able to easily receive the filled Planner as a PDF form.
So some months ago I ran into this post Chris Trip, "Populate Livecycle PDF from mySQL database using PHP" #8, 22 Sep 2007 4:37 pm
which uses the command line Win32 pdftk.exe to merge an FDF file into an existing PDF on the remote server, and serve this to whoever.
My problem was with shared hosting and having the ability to use the Win32 pdftk.exe along with PHP which is predominantly used on Linux boxes. And we used a Linux box.
so i created the following unorthodox method, which a client fills the HTML version of the Planner, all field values are INSERTED into a table in MySQL DB, I and all filled planners that have been filled by clients to date can be viewed from a repository page where an XML file is served up of the corresponding client, but someone would have to have Acrobat Professional, to import the form data from the XML file into a blank form.. altoughh this is simple for me.. I have the PHP file already created so that when a Planner is filled and client submits. >> the an email is sent to me with a table row from the repository of the client name, #, email, and a link to d-load the XML file,
But I also have the PHP files created so that the Planner can be sent to by email to various people in the workflow with certain fileds ommitted they they do not need to see, but instead of the XML file beiong served up i need the filled PDF Planner to be served.
I can do this locally with ease on a testing server, but I am currently trying to use another host that uses cross-platform compatibility so i can use PHP and the pdftk.exe to achieve this, as that is why I am having to serve up an XML file b/c we use a Linux server for our website, and cant execute the exe.
Now that I am testing the other server (cross-platform host), just to use them to do the PDF handling (and it's only $5 per month) I am having problems with getting READ, WRITE, EXECUTE permissions..
Si guess a good question to ask is can PHP do the same procedure as the pdftk.exe, and i can eleminate it.
or how in the heck can i get this data from the DB into a blank PDF form, like i have described??
here are some link to reference
Populating a LiveCycle PDF with PHP and MySQL
http://www.andrewheiss.com/Tutorials?page=LiveCycle_PDFs_and_MySQL
HTML form that passed data into a PDF
http://www.mactech.com/articles/mactech/Vol.20/20.11/FillOnlinePDFFormsUsingHTML/index.htm l
and an example
http://accesspdf.com/html_pdf_form/

Error in generating form with 6i

I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanks

Here is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena

Error importing Word form - Designer 8.0

Similar Messages

Maybe you are looking for