Error in ABAP Proxy

Hi ,
I am getting an error in the proxy , it was working fine but today only it is throughing the following error :
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>CREATE_OBJECT_CLASS_NOT_FOUND</SAP:P1>
<SAP:P2>ZZCL_MIIA_UKEUROPE_TLOG</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing</SAP:Stack>
Please let me know the reason of this .
Thanks in anticipation
Anita

Hi,
I am assuming you have a server proxy (Inbound interface).
Your proxy objects have not been created properly.
To check this, send a message to XI.
Either XI itself will throw an error message, or running SXI_MONITOR in receiving SAP application will show you the error . If you do not see any entry for corresponding interface, then proxy objects have not been created properly.
Regards,
Puloma.

Similar Messages

Error in ABAP Proxy generation?

hai pals,
my intention is to push the data from XI to SAPBWSEM system throgh an ABAP PROXY.
       but , here i got an error which i already mentioned in the forum, that is " no connection to integration builder(only local data visible) ".
        i went to the integration engine configuration in "SXMB_ADM" transaction in SAPBWSEM server.
        in sxmb_adm transaction ,the system ask for the "specific configuration data-catagory" like TUNNING , MONITOR,RUNTIME,TRACELOG,DEBUG and RFCADAPTER.
         im little bit confused in choosing the "catagory of configuration data".so can u pls help me in this error.
with cheers.
rajesh

Did you create the RFC Destinations LCRSAPRFC and SAPSLDAPI to point your SLD ? If not do that.
Then create RFC Dest INTEGRATION_DIRECTORY_HMI type H. Look at your XI box and make these 3 RFC Dests.
Then use the following thread to fix your IFR_ADDRESS
Values for table SPROXSET
regards
SKM

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

Error with ABAP proxy

Hi all,
I have an ABAP proxy - XI - Webservice scenario, in the XI side we are getting error saying input data not coming in. How to check weather proxy is triggering the actual payload or data?
There has been a change in the WSDL from the Webservices side, they have changed the data type, so we too updated the mapping in XI. So do we need to change anything in the ABAP program which triggers the proxy,
how do I check weather proxy is triggering data or not?
I want to see weather its problem with the ABAP trigger program.
Thanks,
Srinivas

Hi ramakrishna,
Does R/3 side SXMB_MONI give successful chequered flag when the message is processed?
Because for correctly processed message, the data is being updated in the table, but I can't see the chequered flag on the R/3 side.
But for the wrongly processed ones its showing PL_TIMEOUT error and showing red flag on R/3 side, this is what I see on the R/3 side:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline timeout condition satisfied</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error monitoring abap proxy in WorkBench

Hi all...
I have a problem monitoring an abap proxy in RWB. I receive this message when i try to see the details of the message (Message Content and Queue Monitor options in Message Display Tool) in message monitoring in RWB: User PIRWBUSER has no RFC authorization for function group HTTPTREE ., error key: RFC_ERROR_SYSTEM_FAILURE. In the other side, i can see the header of the message in the message data of the same option.
Any idea with this problem?
Thanks...

Hi,
check your RFC destination. Here is more info about this error message.
In general we get this error while trying to access Unicode / Non Unicode system using Non Unicode / Unicode RFC connection...Your RFC destination should have same Character Format of your target system
Please checkc this property in RFC desctination under Special Option tab.
For r/3 system, Menu->Status. Check if its unicode or not and it should have the same format as that is listed in RFC.
The user should have following authorizations:
SAP_XI_APPL_SERV_USER
SAP_XI_IS_SERV_USER
Regards,
Venkat.

SAVE_STYLESHEET RC_6 error in ABAP proxy- CRM

Hi,
I developed a POC with just 2 fields in DT,for sender SOAP adapter and reciver ABAP proxy. It is running successfully.
But when i developed a actual scenarios with big structure it is giving the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">STYLESHEET_GENERATION_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Attempt to generate transformation required for rendering/parsing failed (, class , method ) STYLESHEET_GENERATION_FAILURE Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS) Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The only difference in both cases is, i developed everything in client 120 for POC. For actual scenario i created proxy class in client 110 and Technical system and everyting is pointing to client 120. Is it causing any problem?
Everyting is fine in XI but in CRM SXMB_MONI i can see the above error...
How to solve this issue.
Message was edited by:
ashok sri

i tired again.. i regenerated the proxy ... but still same problem..
i dont think internal framework problem.. because it worked for other scenario ( test scenario). I think i only messed it up some where.. but i dont know how to find out or how to debug the problem..
I have a doubt on package structure in which i am saving the proxy class.
i created a structuer package( level1) for which i assigned SAPPINT and for all other packages( level2- main package,level3-non main package, level4-non main package)i assigend SAI_SXMS, SAI_TOOLS, SAPPINT. I am saving the proxy class in level4 package. I am not able to assing SAI_SXMS,SAI_TOOLS to structure package. Is it causing any problem???????
any help please...
Message was edited by:
ashok sri

Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Idoc syntx error me21 , abap proxy call transaction

Hi Experts,
I am struck with the below problem, could you please shed some light on the issue, appreciate your help and rewarded.
scenario:
XI sends NEW PO message to abap proxy, in abap proxy we populate bdc_tab
and call ME21 as below
CALL TRANSACTION 'ME21' using bdc_tab mode 'N' update 'S' messages into messtab.
problem:
EKSEKS01 idoc is getting created with syntax error status code :26 in ECC5.0
only 5 sigments are generated in the idocs. the three segments ( E1PISHO, E1PISIO,E1PISSO not generated).
after transaction executed it returns subrc 1001, msgid--> ME, MSGNO --> 218.
Thanks In Advance.
Ranjit.

Hi Atish and Nishant,
Thanks much for the immediate response.
1.Would like to know what is the mandatory data to be passed for PO creation in BDC table.
2. Is there any user exit or where the idoc creation happens during me21 execution.
I have verified the po in we02 , as before mentioned the three sigments are not getting created and i am not sure the reason.
Note: We didnot have any output configured in ECC 5.0 for this idoc to be created.
I am really not able to locate in debug mode FOR ME21, where this ekseks01 idoc getting created and triggered.
Appreciate your help.
Thanks in Advance.
Ranjit.

Transaction Update Error using ABAP Proxy

Hi Experts,
I am facing an issue using ABAP Proxy.
File is coming from PI to SAP system and it will update the Transaction IE02 using this inbound ABAP Proxy. If records fails then a mail is going to concerned team.
Issue:
When File has been sent from PI to SAP through ABAP Prxoy, it shows that record has been updated in the Transaction IE02 but when I checked manually the record, it has not updated the same. But when I test the same record through my ABAP Prox, it updates the record and when I checked it, Reocrd hs been updated.
Can anybody help me in this case?
Regards
Sachin

Hi Anup,
Can you please explain me for the same? If I need to put External Commit then how It is working when I running it manually
Regards
Sachin

Handling appln errors in ABAP proxy

Hello All,
How is application related exceptions handled in a ABAP server proxy.
Say I update a customer record from a proxy(asynch). Now the customer data does not exist in R/3.
Regards,
Jai Shankar

Jai,
for this purpose you should define your message interface to include a fault message type using the default data types created in a namespace exchangefault data and exchange log data.
when you create the proxy object for this interface, you will get exceptions defined int he object. You can raise the exception and populate the error details into corresponding strucures for exchange fault data & exchange log data.
praveen

HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy

Dear all,
I work in a scenario in which we send data from the R/3 to XI using the ABAP proxies.
But the messages are not received in XI.
The messages are in error in SXMB_MONI of the R/3 system.
The error message we get in SXMB_MONI of the R/3 system is "HTTP_RESP_STATUS_CODE_NOT_OK"
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
Could anyone kindly suggest a solution to rectify this error?
Thanks.
Best Regards,
Thangesh

Hi,
>>401
1) Might cause due to insufficient right of the User ID
2)Try with this Login XIISUSER
3)Tcode SICF -> Default_host -> sap -> xi
( Check right password for the user id )
4) Check the RFC connection User Id..and it's settings.
This Might Help you
HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized
HTTP_RESP_STATUS_CODE_NOT_OK 404 Error
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Regards
Agasthuri Doss

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

Error while activating ABAP proxy object

Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
Sharada

Hi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

OBJECTS_OBJREF_NOT_ASSIGNED error while executing ABAP proxy

Hi ,
I am getting the following error when i try to execute an abap proxy .
Unit ID in Background RFC     001EC9D184F702ECAA8DBC7401DC13E0
Name of First Function Module     SRT_SEQ_SCD_DLV_TRM_QRFC_NEW_C
Inbound Destination Name     WS_SERVICE_02DCA4961A0B_IN
Transaction Code                     SE38
Name of qRFC Queue                     SRTQC_001EC9D184F702ECAA8DBC6FE29753DB
Created On                     28.01.2009
No. of Predecessors                   1
Created At                                    12:44:10
Executed At                     12:44:13
Created At (Time Stamp)     20.090.128.114.410,9989340
User name                                     DEVELOPER
Tcode/program                      CL_SOAP_SCHEDULER_QRFC_NEW====CP
ID of Lock in Background RFC     001EC9D184F702DCAA8DBCA25EC41F5E
Lock Reason                     System error; not executed
Background RFC Scheduler ID              1
Message number                       341
Language Key                            EN
Status Text                               Unit has execution errors
Execution State                             Access using a 'ZERO' object reference is not possible.
Number of Called Function Modules     1
Number of Locks                                    1
Commit Check Disabled               X
Message Class                                  0
Message Variable                             OBJECTS_OBJREF_NOT_ASSIGNED
Executed On                             28.01.2009
and in ST22 transaction i am getting the following dump
Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED
Exception         :CX_SY_RF_IS_INITIAL
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "WSRM_CLONE_FOR_SPECIFIC_OPS" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An attempt was made to access a component (variable: "ME->M_CTX") with a 'ZERO'
    object reference (points to 'nothing').
    An object reference must point to an object (an instance of a class)
    before it can be used to access a component.
    Either the reference has not yet been set or it was set to 'ZERO' using
    a CLEAR statement.
Please help in solving this issue.
Thanks&Regards,
Hamsa Shree

Hi
Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED
Check with the SAP Notes Note
557770 - SAP BP: Short dump OBJECTS_OBJREF_NOT_ASSIGNED
may be you get the exact help
Regards
Abhishek

Error in ABAP Proxy

Similar Messages

Maybe you are looking for