Error in Acctg Interface in Invoice

hi all,
   I cannot create an accounting doc for an invoice which has a posting status: "  Error in Accounting Interface".
I read all the threads in the forums.  I did not have issue with Acct Determination for Revenue.  I do not use acct assignment group. The Account Anlysis in VF02 is fine.
Do we assign anything from an invoice to a cost center ??
When i try to release accounting doc, i got error msg:
   Cost Center Control-Area/ 3150 does not exist on 7/7/2010
Issue is  there is no cost center 3150 at all.  Why is it saying cost center ? Any suggestions are welcome.
thanks
Joyce

Cost center is not available in the specific Controlling area. Reason could be any of the below :
- not available on particular date, that means the validity is not in the period in which you are posting.
- cost center itself is not available.
-wrongly selected cost center / wrongly entered cost center
Please check the valid from date and valid to date of the cost center in the cost center master data in KS02 and you can extend the valid to date if necessary.
OR
Is it a GUI transaction that you are trying to pass or some batch input/BAPI?
If the last is correct, put leading zeros in the cost centre field. If it's a normal transaction, check that the cost centre is assigned to the right company code (KS03).
Thanks & Regards
JP

Similar Messages

  • Accounting Document not posted for Cancelled Invoice -error in FI interface

    Hi,
    When I create a billing document then an accounting document gets created automatically in the background and then when I cancel the billing document no accounting document gets generated and the field Posting Status in header Detail of Billing document updated as "Errors in Financials Interface.
    I tried to release it for Posting via VFX3 but failed due to below error message in Log:
    "Incorrect doc.no.: 4900000005. Select document number between 3000000000 and 3099999999"
    I have checked the Number range assignments to the Invoice type and Accounting type.
    The number range is same for both Invoice type (Y0F2) and Cancelled Invoice type (Y0S1).
    The Accounting document type (RV) is also same for both the cases. But it is working fine for Y0F2 (Acounting document generated and cleared automatically). But not working fine for Cancelled Invoice (Y0S1).
    Can anybody please help me find out a solution to the issue.
    Thanks, Ram.

    Hi,
    The error message F5151 refers to the number range of the FI document.
    Please have a look at the note 1259505: FAQ: New cancellation procedure in SD, which covers this issue in detail.
    Question 5:
    Q5. What is the FI document type, generated by the cancellation ?
    In the old cancellation procedure, the FI document type is always
    determined in SD, and passed to FI (the same when a normal invoice  -
    not a cancellation -  is transferred to accounting).
    In transaction VOFA there is the field 'Document type' (TVFK-BLART).
    If this field is filled, then the FI document will have the document
    type maintained here.
    If TVFK-BLART is empty, then the FI document will get the default
    document type 'RV'.
    If the new cancellation procedure is performed, the FI document type is
    always determined in FI, based on the document type of the FI document
    to be reversed.
    In transaction OBA7 the FI document type has assigned the field 'Reverse
    document type' (T003-STBLA).
    If it is filled, then the FI cancellation document will get the document
    type maintained here.
    If T003-STBLA is empty, then the FI document cancellation will get the
    same document type as the cancelled FI document.
    Notice that an unexpected FI document type can cause the error message
    F5 151.
    Example:
    F2 invoice 90000001 was released, creating an accounting document with
    document type 'RV'.
    This F2 invoice is reversed by the S1 billing document 70000001.
    In customizing of SD there is:
    Billing Type    Document Type
    F2              RV
    S1
    In customizing of FI there is:
    Document Type    Number range   Reverse Document Type
    RV               00             AB
    AB               01             AB
    The FI number ranges (object RF_BELEG) are:
    No  From number    To number   Ext
    00  0090000000     0099999999  X
    01  0100000000     0199999999
    Different situations can occur, due to these customizing settings of the
    FI document type, caused by the type of cancellation.
    If the new cancellation is used:
    The FI document type 'RV' has 'Reverse Document Type' = 'AB'.
    Document type 'AB' has number range '01' set as internal.
    So the FI document will have its own number included in
    100000000-199999999.
    There is no issue.
    If the old cancellation is used:
    The cancellation billing type S1 has no 'Document type' maintained, so
    the FI document will get document type 'RV'. It has number range '00',
    set as external number range.
    So the FI document should get the same number of S1 billing document.
    But the S1 billing document has number 70000001, not included in the
    interval of number range '01'.
    This will cause error F5 151.
    I hope this information helps you.

  • Error in Interfacing Project Invoices to AR - No Active Project Manager

    I am getting an error while transferring a projects invoice to AR.
    I am running concurrent program 'PRC: Interface Invoices to Receivables' program from a responsibility that was created as per the client project security requirements.
    The output  gives an error message - 'No Active Project Manager Found'.
    Note:
    - The project manager is active on the project.
    - The person record of the project manager is active with an active HR assignment.
    - The project manager role is not end dated.
    When I run this same program from the standard Project Implementation Super User responsibility for the same project, the invoice gets interfaced to Receivables without any error.
    Why does this happen ?
    Is this concurrent program dependent on any menu / function / profile option ? If so, which one ?
    Regards,
    Prakash

    Hi Prakesh,
    Were you able to generate Invoice and AR Invoice Number in PJB?
    Try run Oracle Projects Invoice Data Collection Test n Oracle Projects (PA): Security Health Check
    check.
    Regards
    Raghavender K

  • Error in accounting interface at the time of Invoice posting

    Hi..
      Im getting this error at the time of Invoice Posting .
    "Error in accounting interface "
    Plz guide me
    regards
    Deepa

    Deepa,
    Go to VF02, enter your invoice, click on the green flag (release to accounting), now the system will show the exact error.
    Prase

  • *Error in Accounting Interface*

    Dear All,
    when creating billing document for cash sales Accounting Document is NOT Creating and in the cash invoice header in the field of posting status Error in Accounting Interface
    as for the cash sales invoice all the G/L accounts are maintained (VKOA,OV77) and their is no posting block in the billing type.
    Please give the soluation of this problem, its very urgent.
    Thanks in advance.
    Best Regards
    salm

    Check with FI Consultant if Profit Centre is required to be maintained in Customer Master Data.
    The current solution will be to cancell Billing Document --> Cancel PGI --> Cancel Delivery --> foreclose Sales Order
    Maintain Profit Centre in Customer Master Data
    Recreate Sales Order --> Delivery --> PGI --> Billing Document
    Alternatively,
    With the help of Abaper force Profit Centre in Billing Document in Debug Mode. (Not recommended practise)
    Regards,
    Rajesh Banka

  • Error in Financial Interface

    Hi Friends,
    In invoice posting we are getting posting status as " Error in Financial Interface" What is to be checked?
    The background program runs once a day and sometimes we get this error for the document,  But if the same Debit / Credit memo is released through VF02 then we have no error.
    Any help in this issue would be great.
    Venkat.

    Hi JC,
    Following reasons for error `Error in Accounting interface` when releasing SD Billing document to Accounting
    1. Output tax code is not defined / assigned to the GL Account
    2. Product Cost estimate calculated with wrong consting variant
    3. Assignment of Costing element to value field T code KE4R
    4. SD condition is not assigned to COPA
    Please check and let us know the outcome.
    Regards,
    Santosh

  • Error while posting depot excise invoice

    Dear SAP Experts,
    We are continually facing the following error while posting "Depot
    Excise Invoice" on Production sever
    "Error in allocating Depot Invoice number interval not found Number
    object J_1IDEPINV"
    Message no is 8I336
    We have already maintained the number interval for the above object i.e
    J_1IDEPINV with respective series group 62.
    Here is the business process:
    1. First, we make transfer posting thr’ MB1B. We get material doc no
    2. Second, we make selection for RG23D for this material doc thr’ J1IJ.
    RG 23D register gets updated
    3. Third, we make ‘verify/post’ thr’ J1IJ itself. Here we are getting the
    error when we post it.
    Please do needful.
    Its an urgent isue
    Regards
    Tushar

    hello,
    In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
    Regards
    Kedar Kulkarni

  • Error while saving the excise invoice

    Hi All,
    I am getting the following error while saving the excise invoice.
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
    I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
    Kind Regards
    Atul Keshav

    Dear All,
    The issue stands resolved please find below the required settings which need to be done.
    You need to maintain the following entries in  J_1ITRNACC table
    100 DLFC 01 CR PLAAED
    100 DLFC 01 CR PLABED
    100 DLFC 01 CR PLACESS
    100 DLFC 01 CR PLASED
    100 DLFC 01 CR PLAAT1
    100 DLFC 01 CR RG23AAt1
    100 DLFC 01 CR RG23AED
    100 DLFC 01 CR RG23BED
    100 DLFC 01 CR RG23SED
    100 DLFC 01 DR MSUSP
    Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
    TR6C with subtransaction type 01.
    We need to maintain GL Accounts accordingly in the table  J_1IEXCACC.
    If still the error persists then you need to apply the following notes.
    1018071
    978186
    1032813
    The SAP note 1032813 contains the correction for the program MJ1IINF01
    you will have to apply this manually.
    Kind Regards
    Atul Keshav

  • Error in adding A/R Invoice - 'No Matching Records Found'

    Hi Folks,
    This one is related to 'thunderclap8's post last month (June 01, 2011)
    As we create an A/R Invoice, we have encountered an error that says:
    [A/R Invoice  Rows  Warehouse Code] [line: 0] , 'No matching records found  'Inventory Log Message' (OILM) (ODBC -2028)'  [Message 131-183]
    As with the process, the supposed A/R Invoice we're making came from a Delivery/Release that came also to a Sales Order.
    But when we make the same transaction for other Customers, it ends successfully. I'm not trying to point out that it's because of the Customer since the error shows inventory-related concern.
    Any theory on how did it come to this? and any remedy?
    Thanks!
    Fringe

    Hi Raja!
    First and foremost, I would like to thank you for your answer.
    I have checked it and there are no restrictions involved with the item nor with the BP.
    I can't exactly determine the cause of this error.
    I believe you do have other suggestions, don't hesitate to post it here.
    Thanks!
    Fringe

  • Error while creating inter-company invoice  for stock transport

    Hi ,
    I am facing following errors while creating inter-company invoice for STO order.
    We have scenario where standard PO is created in  company code A  & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
    In replenishment delivery we have 10 line items. But  when we try to do inter company invoice through VF01/VF04 we get following log
    XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
    XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
    XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
    With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
    I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
    If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
    Thanks & kind regards,
    Ganesh Palatshaha

    Hello
    Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
    If that is note the case the refer following link:
    - Error VF 047 & 048 while creating Inter company billing
    Regards
    JP

  • Network budget exceeded error while creating Goods receipt/Invoice

    Hi,
    I created project , wbs element, and network and released the project...i created a Po using this network...after that i went to CJ30 and allocated budget for WBS element..I activated availablity control check and define the tolerance limits for all transaction groups (++) with usage as 3(Error message) but i am not getting any error message while creating GRN/Invoice...what setting i have to made to check the budget availablity at the time of goods receipt creation and invoice creation....
    Thanks
    regards
    Dinesh.a

    Hi Dinesh,
    First of all you check whether you have assigned the budget profile in Network Profile or not. 
    Question for you: I want to hide out Account Assignment Element for first 2 levels of WBS Element and i want to consider from 3rd level onwards for specific project profile.  Any Idea.
    regards.

  • In MIRO i am getting error message " vendor is not invoicing party in STO

    Dear All,
    i create one STO MM. This is plant to plant transfer STO. i entered few conditions. for this conditions i mentioned Vendor in condition detail.
    at the time of MIRO i am getting error message vendor is not invoicing party in PO ( STO).
    i checked the vendo master. all partner function are maintained.
    so please guide me
    Thanks
    h shah

    HI,
    Check u had done the below steps,
    Create STO and  input the freight/delivery costs in PO and assign the Transporter or Freight Vendor to the conditions by clicking on "Details" button in Conditions Tab
    For that you have to do following settings;
    Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here select "UB" and copy to a new PO Doc type.
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (New One) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08
    After STO, do Outbound delivery in VL10D, then GR in MIGO and then go for LIV w.r.t. STO in MIRO
    Here select "Planned Delivery Cost" and do necessary procedure.
    Regards
    KK

  • Invoice Reduction-Vendor error: only a higher amount invoiced is allowed

    Hi,
    I am trying to replicate the "Invoice Reduction" Scenario (for both Price and Quantity Variance scenario).
    1) Created a PO for 25 PCE and made GR for 10 PCE (10 USD/PCE).
    2) Entering Invoice for 25 PCE and Amount 2500 USD and I have selected correction ID as Vendor Error: Reduce Invoice. So when the document is posted system should generates the Invoice document and Credit memo.
    But I am getting the error as mentioned in subject.
    Please find below the Error description:
    Vendor error: only a higher amount invoiced is allowed
    Message no. M8582
    Diagnosis
    The item amount in the invoice of          100.00 is smaller than the item amount of        2,500.00 suggested by the system.
    System response
    You currently cannot enter an amount that is smaller than that expected by the system. This would lead to a credit memo for the vendor.
    Procedure
    You can change the default values to correspond to the invoice and then post the invoice.
    Regards,
    Hari.

    Hi,
    Please check if the PO is GR based invoice verification is checked.
    since the GR is only done for the partial qty while you enter the invoice and reducing it system is giving the error.
    If vendor sends a higher amount /qty when compared to PO you can try for a reduction.
    for more information on when and how an invoice reduction need to be done,please check the below link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/b99284452b11d189430000e829fbbd/frameset.htm
    and http://help.sap.com/erp2005_ehp_04/helpdata/EN/d6/36451bca1a4a81b974bb9114e41458/frameset.htm
    and
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/b9975e452b11d189430000e829fbbd/frameset.htm
    Regards,

  • Error FI/CO interface: Balance in transaction currency from BAPI BAPI_ACC_DOCUMENT_POST

    Hi All,
    We are facing error FI/CO interface: Balance in transaction currency from BAPI BAPI_ACC_DOCUMENT_POST.
    This error we are getting only in case of passing tax data.
    Can anyone help me on this.
    Below is the code :
       *fill header
    gd_documentheader-username   =  sy-uname.
    gd_documentheader-header_txt = 'Test'.
    gd_documentheader-comp_code  = p_ccode.   "SQ
    gd_documentheader-doc_date   =  sy-datum.
    gd_documentheader-pstng_date =  sy-datum.
    gd_documentheader-doc_type   = 'KR'.
    gd_documentheader-ref_doc_no = p_xblnr. "SQ
    *gd_documentheader-bus_act = 'RMWE'.
    city = p_city.
    state = p_state.
    zipcode = p_zip.
    *get tax juridisction code
    IF NOT ( city     IS INITIAL ) AND
       NOT ( state    IS INITIAL ) AND
       NOT ( zipcode IS INITIAL ).
      SELECT SINGLE rfcdest INTO ttxd-rfcdest FROM ttxd
       WHERE kalsm = 'TAXUSX'.
      CLEAR x_com_jur.
      REFRESH t_com_jur.
      x_com_jur-city     =  city.
      x_com_jur-state    =  state.
      IF zipcode+5(4) EQ space.
        zipcode+5(4) = '0000'.
      ENDIF.
      CONCATENATE zipcode+0(5) '-' zipcode+5(4)
             INTO x_com_jur-zipcode.
      x_com_jur-country  = 'US'.
      CALL FUNCTION 'RFC_DETERMINE_JURISDICTION'
        DESTINATION ttxd-rfcdest
        EXPORTING
          location_data    = x_com_jur
        IMPORTING
          location_err     = x_com_err
        TABLES
          location_results = t_com_jur.
      IF sy-subrc = 0.
        READ TABLE t_com_jur INTO x_com_jur INDEX 1.
        it_accountgl-taxjurcode =  x_com_jur-txjcd.
      ENDIF.
    ENDIF.
    *fill AP (line 1) - vendor related data
    SELECT SINGLE zterm FROM lfb1 INTO p_zterm WHERE lifnr = p_lifnr.
    it_accountpayable-itemno_acc = 1.
    it_accountpayable-tax_code = p_txcd.
    it_accountpayable-pmnttrms   = p_zterm. "SQ
    it_accountpayable-vendor_no  = p_lifnr. "SQ
    *it_accountpayable-item_text = 'S2P Testing in UDR1'. - SQ
    it_accountpayable-pymt_meth = p_pmet. "- SQ
    APPEND it_accountpayable.
    *fill GL (line 2)
    it_accountgl-itemno_acc      =  2.
    *item_text - sq
    IF p_asset IS NOT INITIAL.
      TABLES : anlz,
               anla.
      SELECT SINGLE * FROM anlz  WHERE anln1 = p_asset.
      SELECT SINGLE * FROM anla WHERE anln1 = p_asset.
    *concatenate '00' anla-KTOGR into it_accountgl-gl_account .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input  = anla-ktogr
        IMPORTING
          output = it_accountgl-gl_account.
      it_accountgl-asset_no = p_asset.
      it_accountgl-sub_number = '0000'.
      it_accountgl-cs_trans_t = '105'.
      it_accountgl-acct_type = 'A'.
    ELSE.
      it_accountgl-gl_account      = p_gl.
      it_accountgl-costcenter      = p_cc.
      it_accountgl-wbs_element     = p_posid.
    ENDIF.
    it_accountgl-comp_code       = p_ccode.
    it_accountgl-tax_code = p_txcd.  "SQ
    it_accountgl-pstng_date      =  sy-datum.
    it_accountgl-fisc_year       =  sy-datum(4).
    APPEND it_accountgl.
    CLEAR it_currencyamount.
    *fill currency ammounts for lines 1 & 2
    it_currencyamount-currency    = p_waers.  "SQ
    it_currencyamount-itemno_acc  = 1.
    *it_currencyamount-amt_base =  -1.
    it_currencyamount-amt_doccur  = - 116. "p_totamt.
    it_currencyamount-CURRENCY_ISO = 'USD'.
    it_currencyamount-tax_amt  = - 16.
    APPEND it_currencyamount.
    CLEAR it_currencyamount.
    it_currencyamount-itemno_acc  = 2.
    it_currencyamount-currency    = p_waers.  "SQ
    it_currencyamount-amt_doccur  = 100.
    it_currencyamount-CURRENCY_ISO = 'USD'.
    *it_currencyamount-amt_base =  100.
    *it_currencyamount-TAX_AMT =  -10.
    APPEND it_currencyamount.
    *tax data
    it_accounttax-itemno_acc = 3.
    it_accounttax-tax_code = p_txcd.
    it_accounttax-gl_account = '0023110000'.
    *it_accounttax-gl_account = p_gl.
    it_accounttax-TAXJURCODE = x_com_jur-txjcd.
    it_accounttax-acct_key = 'NVV'.
    it_accounttax-cond_key = 'XP2I'.
    **it_accounttax-direct_tax = 'X'.
    APPEND it_accounttax.
    CLEAR it_currencyamount.
    it_currencyamount-itemno_acc  = 3.
    it_currencyamount-currency    = p_waers.  "SQ
    it_currencyamount-amt_doccur  = 16.
    it_currencyamount-CURRENCY_ISO = 'USD'.
    it_currencyamount-amt_base =  100.
    it_currencyamount-TAX_AMT =  - 16  .
    APPEND it_currencyamount.
       CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader          = gd_documentheader
    IMPORTING
       obj_key                 = wa_obj_key
      TABLES
       accountgl               = it_accountgl
    *   ACCOUNTRECEIVABLE       =
       accountpayable          = it_accountpayable
       accounttax              = it_accounttax
        currencyamount          = it_currencyamount
    *   CRITERIA                =
    *   VALUEFIELD              =
    *   EXTENSION1              =
        return                  =  it_return
    COMMIT WORK.
    Regards,
    Priyaranjan

    Hi,
    Reason 1:
    An revenue-recognition-relevant item has several active conditions whose values cancel themselves so that a net item value of 0 results. The conditions have both the same revenue account (SAKN1) and the same clearing account (SAKN2).
    For these conditions, the system writes a line with value 0 into the temporary FI/CO interface (internal tables: CACCIT, CACCCR). If table VBREVK does not contain control lines for this line, no further processing occurs and the line remains in the temporary FI/CO interface. Then the system reads this line for the creation of the next billing item which conatins a net value and generates a posting line with value 0. As a result, there is a balance in the FI/CO interface, and the billing document cannot be transferred.
    Reason 2:
    The billing document contains at least one item with an item category for which there is a setting stipulating that the values of this item should not be transferred to the header total of the document.
    That is, in the maintenance of the item categories, this item category has the characteristic 'X' or 'Y' in 'Statistical value' field.
    Reason 3:
    Case: Billing document contains items without pricing conditions.
    Then, on release to accounting, error RW022 occurs.
    regards,
    Saju.S

  • Error in accounting interface -no accounting document generated

    Hi All,
    For a billing document the accounting document is not generated.
    The posting status is hsown as "error in accounting interface".
    Also the billing date(23rd May) is less than the created on date(2nd June).
    I know when we go to the change mode of the billing doc and give the billing date as current date it will realease to accouting.
    What I wnat to know is what could be the possible reasons for the billing date being less than created on date and the posting status being "error in accounting interface".
    Please help.

    hello, friend.
    is your billing referenced to the sales order or delivery?  in standard, if you do not specify the billing date on creation, the system will take the goods issue date for delivery-related billing.
    for order-related billing, it will reference the service rendered date.  if there is no entry, then it will try to reference the billing date in the sales order.
    as to errors in the interface, there are at least a few i can think of:
    1.  the profit center per line item in the sales order was not entered/proposed, or that the entry itself was in error
    2.  the revenue posting based on the original billing date is for a period already closed (however, this opinion is mine and needs to be confirmed by FICO)
    3.  errors in account determination is also a possible reason, although you have to look at the error message if this is pointed out
    hope this helped you.
    regards.

Maybe you are looking for