Error in activating tabels in SPDD
Hi,
We are in SPDD phase in upgrade.While i have added new Append structures in table MARC and activating it its givving error table is not activate and if i cheked syntax check it is showing no inconsitncies
Please help how to activate.
Regards,
Sunil.K
Hi,
Even if the problem continues after SE14 activation(SE14 --> Adjust and Activate Table.) , double check whether the data element is active with latest changes
Thanks,
Anitha
Similar Messages
-
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
i am trying to create a Enterprise Service.the steps that i am following are:
In se80 i am right clicking and then creating a enterprise service.
I am selecting the option as service consumer and then proceeding with the steps.
the wsdl that i am using is https://webservice.test.exacttarget.com/ETFramework-ps-test.wsdl-secure.wsdl
after the steps i am trying to activate the proxy but i am getting the following error:
object not(yet) activated
error when activation a proxy.
P.S i have been able to create a succesful connection in sm59 and i have been able to test the connection succesfullythe repsone i am getting is
Status HTTP Response 200
Status Text OK
Duration Test Call 1104 msHello, did you ever get this working. I am also looking for documentation on setting up and configuring SAP CRM 7 to connect with Exacttarget. Anything you can provide would be very helpful as I am not able to find any documentation on this. Example, exacttarget has sent us a wsdl file but we really don't know what to do with it and they have not provided the documentation related to setup and configuration within SAP.
Thanks,
Doug Thompson -
Error while activating the DTP
Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.MHi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hariHi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error While Activating ODS in BW
Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODShi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error While activating 0Material(BI7)
Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arunDear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun -
Error while activating Infocube
Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED Error/warning in dict. activator, detailed log --> Detail
GREEN Activate table /BIC/DDPCW14DFD1
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN A table called /BIC/DDPCW14DFD1 exists in the database
RED No active nametab exists for /BIC/DDPCW14DFD1
RED Termination due to inconsistencies
RED Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN Error number in DD_DECIDE (9)
YELLO Flag: 'Incorrect enhancement category' could not be updated
GREEN Table /BIC/DDPCW14DFD1 was not activated
GREEN Activate table /BIC/DDPCW14DFD2
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
MohnishCan i know in which environment are you working? BW 3.5 OR BI 7?
-
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM
Maybe you are looking for
-
How do I add a search web part to search ONLY a subsite?
I'm trying to add a search web part into a subsite that will search ONLY that specific subsite for documents. Not the entire site collection or anything else. Everything I've looked at doesn't address this specifically. I want a user to be able to
-
Copying files into two directories
I would like a solution about how can I do that whenever somebody places something in a specified directory, some daemon immediately sync it to a backup directory, keeping the original tree structure. Not scheduling, but immediately copy, as soon as
-
Unable to add Navigational attribute in Qery
Hi All, Am a beginner in Bex queries. I need to add a Navigational Attribute, in a BEx Query. I did the following: 1. Turned ON the Navigational attribute in the Infocube. 2. As my query is on Multiprovider, i had mapped the specific field as well.
-
Adding a field for a view on SM30
We would like to add a field to a standard table and use it as maintanable via SM30. This standard table gets gets is data entries usually when 4-5 views are maintained through IMG customization/SM30. We would like to add one more fields on any of t
-
Budgeting on account & cost center level
Hi ALL, My company is planning to implement SAP in the near future and I'm taking the SAP course now. According to what SAP instrcutor said, budgeting cannot be done on account & cost center level. In my company, our current practice is to record all