Error in alert file

Please tell me I am recieving this message in alert file Oracle DataGuard is not available in this edition of oracle
Thanks

Hi
Data Guard Is Available with ORACLE 9i onwards. Socheck with the version of ur Database with the help of following command.....
SQL> SELECT * FROM V&VERSION
Thnx & Regards
Sunil

Similar Messages

When will ora-01555 error not be recorded in alert file?

Application side repeatably gets ora-01555 error, but from alert log, there is no such error recorded. I recalled normally this error will be recorded, so under which condition we can't find this error in alert file?

You would get ORA-0155 on a LOB if
a) the LOB storage has been defined with PCTVERSION which is low (Oracle doesn't use Undo Segments but uses space in the LOB Segment itself and if this is inadequate for multiple updates, an ORA-0155 is raised, which is not really related to Undo Segments but the space in the LOB segment)
b) the LOB storage has been defined with RETENTION which is low
(Even if you increase undo_retention, you'd have to modify the LOB segment to PCTVERSION and then back to RETENTION for it to use the new undo_retention value).
See MetaLink Notes 162345.1, 66431.1 and 563470.1
Since the ORA-01555 error doesn't really relate to Undo segments, I believe that it would not be reported in the alert.log file -- but I haven't verified this.
Hemant K Chitale
http://hemantoracledba.blogspot.com

Can't open ALERT file error in 10G

We just converted to 10G 2 weeks ago. The alter file was where it was suppposed to be until a couple of days ago. Now I am getting this message and have no alert file. I have tried shutting down the db and restarting, to no avail. Archiving is working normally as is everything else that I can see. The bdump location in the pfile shows correct, bit doesn't match what the error message is saying. This error message comes from the lgwtr trace log.
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2
I am also getting these dbverify logs in 10G, during startup. Any insight would be helpful. Thanks.
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
DBVERIFY: Release 10.2.0.4.0 - Production on Fri Sep 19 00:50:02 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBVERIFY - Verification starting : FILE = /u02/oradata/PROD/indx_PROD_09.dbf
DBVERIFY - Verification complete
Total Pages Examined : 128000
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 61172
Total Pages Failing (Index): 0
Total Pages Processed (Other): 2601
Total Pages Processed (Seg) : 0
Total Pages Failing (Seg) : 0
Total Pages Empty : 64227
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
Highest block SCN : 1048904582 (0.1048904582)

user10278327 wrote:
Cannot open alert file "/u01/app/oracle/admin/PROD/bdump//home/oracle/alert_PROD.log"; errno = 2As you can see the bdump location is different in these two messages. above and below
root@hccaix3: /u01/app/oracle/admin/PROD/bdump #cat dbv_file25_062600.log
Which one is correct?
Since you are on 10g you are most likely using spfile instead of pfile, so login to database
sqlplus / as sysdba
do
show parameter spfile
show parameter background_dump_dest

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

Errors not appearing in alert file

Hi,
Just getting my first experience of Oracle on Windows. The application I am supporting is getting ORA-04030 errors, which we are now investigating, but my question is why these errors were not written to the alert file for that database?
My usual platform is unix, where although I have not seen ORA-04030 errors, I have seen ORA-4031 which I'm sure gets written to the alert file.
Thanks

Hi,
You may not get ORA-4030 in the Alert log as it for system level resource issue, so it should appear at run time for new processes trying to create new processes and are requesting memory. The existing running database processes does not get impacted when they already have memory allocated.
04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
// *Cause: Operating system process private memory has been exhausted
// *Action:
Not all ORA errors reported on alert.log file. Some of the ORA errors are reported only on client side. This error will be reported on alert.log if any of the oracle server processes is not able to allocate memory.
HTH
Edited by: skvaish1 on Jan 21, 2010 10:08 AM

RMAN success, but errors in alert.log file

My RMAN backup script runs well, but generates errors in alert.log file.
Here is the trace file contents:
/usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_3990.trc
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
System name: Linux
Node name: plockton
Release: 2.6.18-128.2.1.el5
Version: #1 SMP Wed Jul 8 11:54:54 EDT 2009
Machine: i686
Instance name: XE
Redo thread mounted by this instance: 1
Oracle process number: 26
Unix process pid: 3990, image: oracle@plockton (TNS V1-V3)
*** 2009-07-23 23:05:01.835
*** ACTION NAME:(0000025 STARTED111) 2009-07-23 23:05:01.823
*** MODULE NAME:(backup full datafile) 2009-07-23 23:05:01.823
*** SERVICE NAME:(SYS$USERS) 2009-07-23 23:05:01.823
*** SESSION ID:(33.154) 2009-07-23 23:05:01.823
*** 2009-07-23 23:05:18.689
*** ACTION NAME:(0000045 STARTED111) 2009-07-23 23:05:18.689
*** MODULE NAME:(backup archivelog) 2009-07-23 23:05:18.689
Does anyone know why? Thanks.
Richard

I'm not sure if this will answer your question or not, but I believe these messages can likely be ignored.
I'm currently running 10.2.0.1.0 Enterprise Edition in pre-production (yes, I know I should apply the latest patchset and I plan to do so as soon as I get a development box allocated to me and can test it's impact). I see the same types of messages that you've reported with each of my regularly-scheduled backups:
a) The alert_<$SID>.log reports that there are errors in trace files:
Mon Aug 10 04:33:49 2009
Starting control autobackup
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Control autobackup written to DISK device
handle '/backup/physical/BLAH/RMAN/cf_c-2740124895-20090810-00'
b) The .trc files, when you look at them contain no errors - only these "informational" messages:
*** 2009-08-10 04:33:50.781
*** ACTION NAME:(0000105 STARTED111) 2009-08-10 04:33:50.754
*** MODULE NAME:(backup archivelog) 2009-08-10 04:33:50.754
*** SERVICE NAME:(SYS$USERS) 2009-08-10 04:33:50.754
*** SESSION ID:(126.28030) 2009-08-10 04:33:50.754
c) I've verified that LOG_ARCHIVE_TRACE is set to 0:
SQL*Plus> show parameter log_archive_trace
NAME TYPE VALUE
log_archive_trace integer 0
As best I can discern from my own experience, these should just be ignored and I trust (read: "hope") they will simply go away once the latest patchset is applied. As for you running Oracle XE, a patchset is not an option, unfortunately.
V/R
-Eric

ORA- errors in alert log file

I wanted to know when the ORA- errors are reported into the alert.log file?
And which tye of errors are reported into it?
And if i wanted to log all the ORA-errors in the alert log then is there any setting for that?

You can find the type of errors reported in the link above.
Also, you maynot like to log ORA-00942: table or view does not exist, ORA-00904: : invalid identifier type of errors in alert.log - right? You may want to research at setting up events for generating trace files on specific error numbers you are looking at. That might resolve your problem - hth.

Checking block corruption, why in alert it is saying Error in trace file

Hi,
I am using Oracle 10g 10.2.0.1 with linux 32 bit
I wanted to check block corruption using RMAN by following statement
backup validate check logical database;
when i executed the statement, following was the output
Starting backup at 09-MAY-08
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=91 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u01/app/oracle/oradata/test/users01.dbf
input datafile fno=00008 name=/u01/app/oracle/oradata/test/workflowuser
input datafile fno=00001 name=/u01/app/oracle/oradata/test/system01.dbf
input datafile fno=00003 name=/u01/app/oracle/oradata/test/sysaux01.dbf
input datafile fno=00010 name=/u01/app/oracle/oradata/test/ifan
input datafile fno=00002 name=/u01/app/oracle/oradata/test/undotbs01.dbf
input datafile fno=00007 name=/u01/app/oracle/oradata/test/taker
input datafile fno=00009 name=/u01/app/oracle/oradata/test/testing1
input datafile fno=00005 name=/u01/app/oracle/oradata/test/brokerdb
input datafile fno=00006 name=/u01/app/oracle/oradata/test/moneio
input datafile fno=00011 name=/u01/app/oracle/oradata/test/web1
input datafile fno=00012 name=/u01/app/oracle/oradata/test/e1
input datafile fno=00013 name=/u01/app/oracle/oradata/test/ind1
channel ORA_DISK_1: backup set complete, elapsed time: 00:06:57
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 09-MAY-08
and when i do the following query
select * from v$database_block_corruption in sqlplus
then there was no row
so it means there is no logical corruption, but when i am looking at alert log file it is giving following lines
Fri May 9 10:14:04 2008
Errors in file /u01/app/oracle/admin/test/udump/test_ora_6606.trc:
Fri May 9 10:14:04 2008
Errors in file /u01/app/oracle/admin/test/udump/test_ora_6606.trc:
Fri May 9 10:14:04 2008
Errors in file /u01/app/oracle/admin/test/udump/test_ora_6606.trc
and in above trace file following contents
/u01/app/oracle/admin/test4/udump/test_ora_6606.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
System name: Linux
Node name: test
Release: 2.6.18-5-686
Version: #1 SMP Wed Oct 3 00:12:50 UTC 2007
Machine: i686
Instance name: test
Redo thread mounted by this instance: 1
Oracle process number: 61
Unix process pid: 6606, image: oracle@test (TNS V1-V3)
*** 2008-05-09 10:14:04.093
*** ACTION NAME:(0000040 STARTED19) 2008-05-09 10:14:04.071
*** MODULE NAME:(backup full datafile) 2008-05-09 10:14:04.071
*** SERVICE NAME:(SYS$USERS) 2008-05-09 10:14:04.071
*** SESSION ID:(91.40318) 2008-05-09 10:14:04.071
Is it normal, why the in alert file it is saying that Error in.
And it did not create any backupset in folder of flash recovery but in Enterprise manager it is showing last backup on 09-may-2008, why ?
Regards,

See logical corruption is normally termed as the internal inconsistancy within the block which is not caused by Oracle but by the user.So if you find internal inconsistancy than the best option is to look at the user and ask him to get the values sorted out.If the internal inconsistancy is some thig like index fragmentation sort of things or index entry pointing to a null rowid than they are termed as the logical corruption and they should not impact your normal as he data is already there and there is no issue in reading the block as such.
The term "corrupted blocks" I would call both in the tables and backup for those data blocks which are unreadable by Oracle which actualy is Physical corruption.
If i am doing the checking at 2:00 am, does it take more than two hours.I didnt understand this.
what can we do for Physical corruptionThis will need the block to be recovered with the Block Recover command of RMAN and a good backup.Read about it here,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta010.htm
About the Logical and Physical corruption checks , check here
http://download-west.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1012.htm
Aman....

How to check particular error in alert log file

Hi all,
How to check particular error in alert log file,for supose if i get error in batabase yesterday 4 pm & today i want to check alert log file to get basic idea..it might be a big file so how to check that particular error..
Thanks & regards,
Eswar..

What's your oracle version?
If you are in 11g you can use adrci tool
1- set homes diag/rdbms/orawiss/ORAWISS/ : the rdbms home
2- show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term : to find all the ORA-% errors in the alert file
3- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term : to find all the ORA-% errors in the alert file during the last 51 days,
4- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-1/24 " -term : to find all the ORA-% errors in the alert file during the last hour,
5- show alert -P "MESSAGE_TEXT LIKE '%ORA-12012%' and originating_timestamp > systimestamp-1/24 " -term : to find the particular ORA-12012 error in the alert file during the last hour,
Example:
[oracle@wissem wissem]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed May 4 10:24:54 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/home/oracle/app/oracle"
adrci> set homes diag/rdbms/orawiss/ORAWISS/
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2010-12-11 19:45:41.289000 +01:00
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/home/oracle/app/oracle/oradata/ORAWISS/system01.dbf'
ORA-1547 signalled during: ALTER DATABASE RECOVER database until time '2011-01-21:10:48:00' ...
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2011-03-15 10:19:45.316000 +01:00
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j006_5536.trc:
ORA-12012: error on auto execute of job 26
ORA-01435: user does not exist
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>

Configure Email through OEM when there is a error in alert log file

Hi,
I am using 10.2.0.4 on O/S RHEL5.0
I want to configure email facility through OEM so that whenever there is a error in alert log file i should receive an email.
Thanks and Regards
Amith

http://www.dba-oracle.com/oracle10g_tuning/t_oem_tuning.htm
Please read above link.
Regards
Girish Sharma

Minact-scn errors in Alert and Trace Files

we have enabled trace for one session ( where select query is running ) and we seen this error in trace file
can any one suggest me to resolve this issue.
--------------------------------------------------------------Trace File------------------------------------------------------------------
*** 2015-04-23 19:19:29.559
minact-scn master-status: grec-scn:0x0805.5b417ecb gmin-scn:0x0805.5b3d0eda gcalc-scn:0x0805.5b417ecb
minact-scn master-status: grec-scn:0x0805.5b41818c gmin-scn:0x0805.5b3d0eda gcalc-scn:0x0805.5b41818c
*** 2015-04-23 19:29:33.749
minact-scn master-status: grec-scn:0x0805.5b424c67 gmin-scn:0x0805.5b3d0eda gcalc-scn:0x0805.5b424c67
*** 2015-04-23 19:34:36.560
minact-scn master-status: grec-scn:0x0805.5b425343 gmin-scn:0x0805.5b3d0eda gcalc-scn:0x0805.5b425343
minact-scn master-status: grec-scn:0x0805.5b425749 gmin-scn:0x0805.5b3d0eda gcalc-scn:0x0805.5b425749

Hi,
Check support note if database is hitting a bug - Minact-Scn Master-Status: Grec-Scn Messages In Trace File (Doc ID 1361567.1)
HTH,
Pradeep

ORA-3136 error in alert log file(EBS R12)

I have found ora-3136 alert log error in ebs r12 instance Can any one help on this error. Alert log continuously write this error. Below is the error i found.
Fatal NI connect error 12170.
VERSION INFORMATION:
        TNS for Linux: Version 11.1.0.7.0 - Production
        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 07-NOV-2013 18:33:49
Tracing not turned on.
Tns error struct:
    ns main err code: 12535
TNS-12535: TNS:operation timed out
    ns secondary err code: 12606
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.100.108)(PORT=60495))
WARNING: inbound connection timed out (ORA-3136)

Does this affect the functionality of the application?
Do you get any errors when opening forms or self-service pages?
Please see:
ORA-01403 and FRM-40735 error occur while opening any forms (Doc ID 1358117.1)
Troubleshooting ORA-3135/ORA-3136 Connection Timeouts Errors - Database Diagnostics (Doc ID 730066.1)
ORA-3136/TNS-12535 or Hang Reported for Connections Across Firewall (Doc ID 974783.1)
Thanks,
Hussein

How to print only fatal error in log file in tomcat4.1

Hi all ,i m using tomcat4.1
1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
assume below ip address is corect:
this is exact printing in my log file
.12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
Edited by: Deepak23 on Oct 24, 2007 11:16 PM

One of my standard answers (which will explain the use of Directory Objects)...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

Error opening pdf file, but then it still opens

I am having trouble when I open a pdf.I am using the code below to open a pdf.
on mouseUp me
acro = bafindapp("pdf")
if acro = empty then
    acrofile = me.pPDF
    alert "This program was unable to find a suitable program on your system to open a PDF document. It will open www.adobe.com, where you can download a free viewer"
    goToNetPage "http://www.adobe.com"
else
    open the moviePath & "Resource\" & me.pPDF with acro
end if
end
When this is on a button, adobe reader will open, but gives an error saying "There was an error opening this document. This file cannot be found."
When I hit the ok button on the error notice, the pdf opens.
Any ideas why I am getting this message even though the pdf opens after dismissing the message would be appreciated.

The reason I assumed, or asked, whether it was Windows-only is because of your use of the backslash character as the folder delimiter. To make the script cross-platform try the following:
on mouseUp me
acro = baFindApp("pdf")
if ( acro = EMPTY ) then
    alert "This program was unable to find a suitable program on your system to open a PDF document. It will open www.adobe.com, where you can download a free viewer"
    goToNetPage "http://www.adobe.com"
else
    mPath = _movie.path
    tFile = mPath & "Resource" & mPath.char[length(mPath)] & me.pPDF
    if baFileExists(tFile) then
      OK = baOpenFile(tFile, "normal")
      if ( OK < 32 ) then
        -- see docs for numbers and their meaning
        alert "Error opening file:" && OK
      end if
    else
      alert "File not found:" &RETURN& tFile
    end if
end if
end

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

Error in alert file

Similar Messages

Maybe you are looking for