Error in allocating Excise inv no Interval not found No object J_1IEXCLOC

Hi, When I try to execute J1IV, I am getting the below error:
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
Regards
Suresh

Hi,
Please check in SNRO as you allocated no range for J_1IEXCLOC  object for your series group & check for J_1IARE3 object also for same series group.
regards

Similar Messages

  • "Error in allocating Excise invoice number Interval not found Number object

    Hi friends,
    I am getting above error while creating the Excise Invoice. I have checked all the settings like No range in SNUM for object J_1IEXCLOC and all other settings. I have posted the thread earlier related to same problem and issue was resolved.Now I am facing the same problem and I have checked all the settings.
    Looking forward for u r valuable inputs.
    Regards
    Jaiprakash

    Try these customizings regarding your process.
    Go to IMG Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.
    There select your excise group and untick the box against the tab "Create EI". Now rerun the process and post the feedback.
    SAP Customizing Implementation Guide>>>>>>Logistics - General>>>>>Tax on Goods Movements>>>>>
    India>>>>>Business Transactions>>>.>>Outgoing Excise Invoices>>>>>Maintain Default Excise Groups and Series Groups
    Above setting is only made for differentiate of Export sale transactions .............
    Go to J_1iintpr2 and check the interval for current year.
    Best regards,
    Ankur
    Edited by: Ankur Agrawal on Jun 22, 2009 6:13 PM

  • Error in allocating Despatch serial number Interval not found Number object

    Hi All,
    While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
    "Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
    Message no. 8I336"
    The Excise Group(say 99) was created.
    But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object  J_1IINTPR2.
    Do the needful to resolve this issue.
    Needless to say helpful answers will be rewarded.
    Regards,
    Raj Kumar Reddy.

    Dear Raj,
    Go to Excise group details here you check these settings
    IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
    Have you check all these check boxes
    1.Excise Inv during billing
    2.Create and Post Invsingle step                    
    3,Depot Excise invoice
    4.EI capture
    5.Diuty Different at GR
    6.EI create/RG23D selection
    7.Update RG1 at MIGO
    I hope this will help you,
    Regards,
    Murali.

  • Error in allocating RG23D document number Interval not found Number object

    Dear
    Expert
    Error in allocating RG23D document number Interval not found Number object J_1IRG23D
    I tried the solution given in the forum but its not working,
    Pls help me out.
    Thanks and Regards
    Deepankar

    Hi,
    As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
    hope now its clear.
    Thanks and regards
    Deepankar

  • Interval not found number object J_1IINTNUM.

    <b>Dear friends,
    During creation of excise invoice(t code J1IIN) i found
    Error in allocating int. doc number
    Interval not found number object J_1IINTNUM.
    PLEASE HELP
    Ranjan</b>

    Dear Ranjan,
    Go to transaction SNRO enter J_1IINTNUM -> click on Number ranges pushbutton option in the applicaiton toolbar -> Click on Change Interval pushbutton -> Maintain Number Range Interval and save.
    Regards,
    Naveen.

  • Despatch serial number Interval not found Number object J_1IINTPR2

    Hi all,
    I am facing one error when creating excise invoice.
    system shows the following error.
    Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
    For this, i tried to maintain number range in j1i9 object J_1IINTPR2.
    Here system is not showing excise group number.
    But for one company code it shows and another company code excise group code is not displayed.
    Can anyone tell me what will be the problem?
    Thanks in advance,
    Babs

    Thanks for your reply..........
    excise group 10 belongs to first plant
    excise group 20 belongs to second plant.
    settings are maintained same for the two excise group.
    excise group 10 is displayed in  J1I9 (Number object J_1IINTPR2).
    But excise group 20 is not displayed over there. I want to maintain number range for excise group 20.
    Thanks in advance
    Babs

  • Error in allocating Despatch number Interval not found Number object J_1IIN

    Dear All,
    I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
    Can somebody help me with a solution ?
    Rgds,
    Indrajit Dey

    Dear Indrajit
    Go to SNUM, input object J_1IINTPR2 and click on Number Ranges.  Enter [Excise Group]  and click on Intervals (with pencil icon).  Maintain the number range and save.  Now try the process once again.
    thanks
    G. Lakshmipathi

  • Number range interval not found for object ISH_NLEI in executing NP38

    Dear ALL,
    In executing Transaction NP38 when we save the surgical procedure codes the system
    generates an error message "number range interval not found " . The object referred here
    ISH_NLEI number range has already been defined in spro Define technical number range.
    Please assist what should be done here to resolve the problem.
    Regards
    Ramit

    Hi, check if it maintained in tcode snro for this object

  • Excise inv num interval

    I am tryin to create an excise invoice and I am gettin the following error pls assist in resolution of the same
    "Error in allocating excise invoice num interval
    not found number object J_1Iexcloc"
    Regards
    MAddy

    Hi
    Please check in Customizing, whether you have properly maintained the IMG activity Excise Group - Series Group Determination.
    Further,
    Check your Number Ranges for both
    Billing type F2 as well as for Excise Invoice Number range for all relevan objects.
    May be there is overlapping of Number Ranges Somewhere.
    Pls Check these settings.
    Refer below url for further details
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/create-excise-invoice-for-factory-sale-840193#

  • Getting error : " not found Number object J_1IDEPINV "

    Hi SAP Expert,
    When I am posting Excise Invoice at Depot using J1iJ, i am getting the error : " Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV " when trying to Save.
    Already checked that I have maintained the number range for object J_1IDEPINV in J1i9 for my series group. But I am still getting the same error. Any clue ?

    You would have maintained the number range for the required series group but ensure that it is maintained for the current year.
    thanks
    G. Lakshmipathi

  • Error occuring during excise inv creation.

    Dear sd gurus
    Plz find the error as under.
    "Error in allocating Excise invoice numb
    not found Number object J_1IEXCLOC"
    I have maintined no range in J1I9.
    Also I want to know the a/c effects while creation of excise inv. while utilization. while doing payment to excise authorities.
    Regards
    nitin

    Dear Vijay
    Please let me know for which type of sales, you are trying to create excise invoice whether for domestic or for local.
    For information, to maintain number ranges for excise invioces, you have to go to SNUM or SPRO and select any of the below objects required by you
    -  J_1IEXCEXP   if it is for Exports
    -  J_1IEXCLOC   if it is for Domestic
    and select NUMBER RANGE on top. It will ask for "Series Group". Give the respective plant's series group and click "Change intervals".
    Now give some value in the field "No" followed by year and number range and save.
    thanks
    G. Lakshmipathi

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • Error in allocating excise invoice

    When i do the billing using vf01, the billing document is displayed. On saving the billing document, i get the message " Print excise invoice in series group S2 using j1-ip for billing document" and a message at the bottom of the screen comes "excise document created for billing document". However when i try to post it to accounting, I get a message "express document" update was terminated"". On clicking the error, it shows " error in allocating excise invoice" and the attribute defined for it is "Express copy printing not allowed . Forwarding not allowed". How to resolve this problem? Please help
    Rohit Uniyal

    Hi Garima/Rohit,
    Please check in  Customizing, whether you have properly maintained the IMG activity Excise Group - Series Group Determination.
    Further,
    Check your Number Ranges for both
    Billing type F2 as well as for Excise Invoice Number range for all relevan objects.
    May be there is overlapping of Number Ranges Somewhere.
    Plz Check these settings.
    Reward if found useful.
    Regards,
    Gaurav Raghav.

  • Number range object HRTR_PDOC : Interval not found

    Hi,
    I am doing Travel Mgt testing i got two problems
    1. Travel Policy is not taking when entering the expences
    2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
    Pls suggest
    thanks in advance
    chandu

    Hi,
    Check table NRIV
    Regards,
    Manoj.

  • Error in starting the service Oracle CSService not found

    Hi all,
    i am trying to install Oracle Enterprise manager grid control,
    i am getting the following error message
    "error in starting the service Oracle CSService not found"
    when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
    then i checked in the service properties, and the path is pointing to a different directory,
    now i want to change this path to the correct oracle bin directory.
    any views how to cnage/update this path in the services.msc, for "Oracle CSService"
    Thanks alot.

    Hi
    i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
    and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
    Thanks to all the viewers.

Maybe you are looking for