Error in assigning the tax group during j1iex

hi
can any one help me....
while posting J1IEX
i am getting this error mesage
"error in assigning the tax group"  message ff 716
regard
ashwani

hi ravi
thanks for reply. it was very helpfull, i have awarded u with points.
my problem got solved.
thanks
ashwani

Similar Messages

  • Error in assigning the tax group (FB50)

    Hi ,
    I was trying to post a FB50 document and got the following error:
    Error in assigning the tax group
    Message no. FF716
    Diagnosis
    To guarantee a connection between the automatically created tax items, the initiating line items, and the tax information used for reporting, a unique code is assigned to the line items belonging together. An error occurred during this assignment.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Create an OSS message.
    Please let me know if anyone has encountered this error and what is the resolution for this
    Best Regards,
    V

    Hello,
    Refer SAP Note 207235 - FF716 and FF747 for postings with tax jurisdiction code
    Regards,
    Ravi

  • Error in assigning the tax group

    Dear all,
    i am facing problem KO88 FOR AUC SELTMENT error is "Error in assigning the tax group"
    Error in assigning the tax group
    Message no. FF716
    Diagnosis
    To guarantee a connection between the automatically created tax items, the initiating line items, and the tax information used for reporting, a unique code is assigned to the line items belonging together. An error occurred during this assignment.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Create an OSS message
    Please guide me how to sole the problem
    regards
    Raj

    Dear:
                    Please apply OSS note  1292730 . In some instances it happens so that a tax procedure is assigned to company (Check in OY01) that does not use jurisdiction code but you have maintained settings in OBCL you have maintained settings for tax jurisdiction code for the co code. This mismatch may result in this error. Please check and revert back.
    Regards

  • Error in assigning the tax group in SRM-IMS

    Hi All,
    I am getting an error "Error in assigning the tax group" and when checking thru BBP_PD, message number BBP_PD, 047.
    When posting a non PO based invoices from IMS this error is appearing however when I am creating same invoice from XML and posting it in IMS, I am not getting any error and able to post it successfully.
    When posting the invoince thru FB60 with same set of data like company code, tax code etc, no errors!!!
    Please let me know if anyone has faced similar issue?
    Regards,
    Gopesh

    Dear:
                    Please apply OSS note  1292730 . In some instances it happens so that a tax procedure is assigned to company (Check in OY01) that does not use jurisdiction code but you have maintained settings in OBCL you have maintained settings for tax jurisdiction code for the co code. This mismatch may result in this error. Please check and revert back.
    Regards

  • Error in Assiging the Tax Group - FF716

    I have created a new tax code for GL assignments for GST purposes on our ledger but when I try and post a GL Ledger entry using the tax code I receive the following error message "Error Assigning the tax group", Msg # FF716. 
    This tax code is for sales entries at zero percent for GL accounts where an output tax code is required.  I have not been able to find an appropriate SAP note on the SAP Support Portal for this error number or a clue as to the linkages between the tax code and the assigned tax group.
    This is the first tax code I have configured and have copied the config from existing tax codes that are currently functioning correctly.
    Can anyone please help.

    Hi,
    Please apply the correction of note 1292730 and test the outcome.
    I believe that the error FF716 is called due to a missing customizing or a customizing that is not correctly in place. Please can you check your tax customizing for your company code very carefully and take the LONG TEXT of the ERROR message into account going forward in resolving this issue.
    For example a tax procedure is assigned to a country which does not use Jurisdiction codes, but in TCode OBCL a jurisdiction
    is entered for the company code. Bottom line is, if no jurisdiction codes are used in the procedure then no assignment should be shown in OBCL.
    I hope this helps.
    Regards
    Ravinagh Boni

  • A fatal error occured in the PD Layer during create Supplier RFx response

    Dear SRM 7 Experts,
    I am implementing SRM 7.  I can successfully create a Supplier RFx Response on behalf of a supplier using the Surrogate Bid functionality.  However, if I log on as a supplier contact person and try to create a Supplier RFx Response, I get error u201D A fatal error occured in the PD Layer. The transaction needs to be terminatedu201D. 
    Number ranges for Supplier RFx response (BUS2202) are maintained and assigned to the transaction type correctly.
    What could be the problem? 
    Kind regards
    Pedzi

    Hi
    Here is the thread which solved the same problem:
    Re: A fatal error occured in the PD Layer during RFx response
    with regards
    Manjunath

  • Error while creating the product group by MC84

    Hello Friends,
    I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
    Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
       Please guide.

    Dear,
    This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
    Try to create the product group as material of material type"PROD"
    Then you go on adding the memebers in SOP Transaction.
    In some of the versions of SAP it is the problem.
    I have also faced this problem in some versions.
    Regards,
    R.Brahmankar

  • Assigning the Authorization group to particular transaction code

    Hi,
      How do we Assign the Aughorization group to particular Transaction code with authorization object. Is there any transaction code ?
    if anyone know, please let me know.
    With Regards,
    Prasad.

    The Tcode is tied to a Program & you can assign the Program to an Authorization Group via its attributes. I don't think there is an option to directly attach a Tcode to an Authn Group.
    ~Suresh

  • "Can not get a key" error when assigning the OAuthTokenIssuer certificate

    I am migrating from Lync Server 2010 to 2013. When deploying the 2013 server, it fails when assigning the OAuthTokenIssuer certificate. With the KeyException error below.
    I've tried "re-keying" the cert and confirmed that the key is exportable. Does anyone have any insight on how to resolve this? 
    =============
    <?xml version="1.0" encoding="UTF-8"?>
    -<CsMgmtLog Name="Set-CSCertificate">
    <Info Time="2014-04-21 19:00:53Z" Title="Connection">Data Source=servername.domain.com;Initial Catalog=xds;Integrated Security=True</Info>
    -<Action Name="Set Certificate" Time="2014-04-21 19:00:53Z">
    -<Exception Time="2014-04-21 19:00:54Z" Message="Can not get a key." Type="KeyException">
    <StackTrace Time="2014-04-21 19:00:54Z"> at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy) at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext) at Microsoft.Rtc.Management.Internal.KeyManagement.GroupKeyWrapper.Encode(Byte[]
    inBytes) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor scope, X509Certificate2 foundCert, X509Certificate2Collection certs, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor
    scope, String thumbprint, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Tasks.SetCertificateTask.Action() at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)</StackTrace>
    </Exception>
    <Complete Time="2014-04-21 19:00:54Z"/>
    </Action>
    <Error Time="2014-04-21 19:00:54Z" Title="Error">An error occurred: "Microsoft.Incubation.Crypto.GroupKeys.KeyException" "Can not get a key."</Error>
    </CsMgmtLog>
    =============
    Regards,
    Yai

    Please try to assign the certificate with Lync Server Management Shell.
    Run the following command:
    Set-CSCertificate -Identity Global -Type OAuthTokenIssuer –Thumbprint <string>.
    Check if you can assign default certificate to Lync Front End Server.
    Check the Root Certificate Authority certificate is not expired.
    Lisa Zheng
    TechNet Community Support

  • Error while assigning the persons to the Project activities

    Dear Experts,
    In Workforce planning, I am facing the below error
    No requirements were found for the selection criteria
    Message no. C#043
    I have created a project and assigned the work center to the activities, the work center is having the persons assigned. I have maintained other formula as SAP007 in the work center capacities tab.
    In the network activity when I choose the option to calculate work, the work is calculated correctly, and in the network header Capacity requirements tick is enabled. But still I am not able to assign the persons in Trnx CMP2.
    Can you please advise on the above to resolve the issue.
    Note: The project status is CRTD.
    Thanks and Regards,
    Praveen

    Hi,
    This problem mainly arises when scheduling is not done. Schedule the WBS under which these activities fall. The WBS should not have the status as NTUP. Note that these comments are in addition to what Ahmed has mentioned in his post.
    Also check you workforce planning profile if need be. Try this and revert.
    Regards,
    Gokul

  • Error while assigning the user to orgunit and position

    Hi,
    We are having the below issue :
    1.       Obtain the HR master record (P Ids) created by interface - ECC
    2.       Assign a valid user to this HR master record -ECC
    3.       Do the position/Org assignment against this P Id or personnel master record - ECC
    4.       Transfer the Org Id, then the position ID and then the personnel master ID (P Id) to SRM u2013 ECC
    5.       Check if the user is in SYNC in SRM  - Ideally he should inherit the mandatory parameters from the above Orgs in the structure without which he shall not be able to shop in SRM u2013 step executed in SRM
    Please let us know if this process is as per the expectation.
    If so, we are ending up with error in the third step where the assignment is not allowed since the personnel master record is created with prior date than the position and the Org units.
    Actually we are getting the idoc with user alone from other system, org and position ids are blank. So we are assigning the user in the system and we are getting above error.
    Is this the correct process to bring the users alone into the system and doing the position/organization assignment in ECC now?
    Or the Idoc comes with this data as well? 
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Mar 5, 2012 5:33 AM

    Thank you vikas for your reply.
    So we should bring all the data in the idoc(O,S,P). Even though O, S are present in the receiving sytem?
    Regards
    Venkatesh P

  • Error while assigning the role to the user

    Hi,
    error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
    i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
    Thanks & Regards
        kiran.B

    Duplicate Post

  • Error while assigning the fallowing role to the user

    Hi,
    ERROR 2007-01-18 14:13:25
    CJS-30196  Role SAP_BC_JSF_COMMUNICATION_RO is not assigned to user SAPJSF
    i am getting the fallowing error while trying to assigning the fallowing role to the user any body through some light in to it.
    Thanks
    kiran.B

    Hi,
    Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
    Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
    Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
    Step:2: press copy button and change the naming convention.
    Step:3: Assign to the user.
    I hope it will help you.
    kiran kumar.v

  • Error Message FF747  -The tax amount must not be greater than the tax base

    Hello,
    We are attempting to post an import vendor invoice through transaction    FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the    FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
    We tried putting a very high percentage in the tax code also but it didn't help
    We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
    Best Regards
    Amit  Kulkarni

    Hello
    This may be  a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like  this to be posted along with the expense item

  • Error with iTunes "The iPod Group Storage cannot be used with iTunes...."

    I bought a usb hub to accomodate my multiple usb devices. I plugged my iPod into this and got the following error:
    "The iPod Group Storage cannot be used with iTunes because it is not formatted properly."
    I plugged the iPod into the computer rather than the hub. Same thing
    Tried to restore, per the error message's direction. It says it has restored it to factory settings, then it brings up that message again.
    I uninstalled and re-installed iTunes. Same thing. It was playing fine but it needs re-charging now and it won't because of the error.
    Does anyone have any ideas? I don't know what to do now.
    Thanks.

    Try to reset your iPod using the recovery mode as described in this support article
    However, this will erase the iPod completely. If you have an iTunes-backup on your computer you can restore your iPod settings later from the backup.
    I have never tried this in WIndows, however. The procedure might be slightly differeent.

Maybe you are looking for

  • Finder not showing Desktop

    Running Mavericks, checked Finder Preferences and 'Desktop' IS checked to show... but it doesn't show the desktop in the left column any longer.  Finder _usually_ shows all my drives including internal, external USB, FW, and NAS.  Prior to Mavericks

  • AppleID changes not saving

    (I'm not entirely sure this is the best place for the question, but there isn't a clear section for AppleID issues). When I go into the "My Apple ID" (appleid.apple.com), I can log in just fine, but when I make changes, they aren't actually saving. 

  • Render PDF: connection refused

    Hello, I’m working through the technical note of rendering oracle HTMLDB to PDF. Last Step 7(go figure...) When I click on the link “Output to PDF Document “ I get a popup message stating, “ The connection was refused when attempting to contact xxx.x

  • Firefox closes right after startup, even when starting in safe mode

    I have tried all the steps in the "Firefox crashes" article but none of these helped.

  • My imac doesn't seem to have textedit

    why don't my imc have textedit ? i got the imac on early 2012