Error in BAPI_MATERIAL_SAVEDATA -  Unit of measure ****** is not defined;

Hi,
I am using the BAPI_MATERIAL_SAVEDATA to create material in the material master, I am passing
    ls_bapi_head-basic_view    = 'X'.
    ls_bapi_head-purchase_view = 'X'.
    ls_bapi_head-mrp_view      = 'X'.
    ls_bapi_head-storage_view  = 'X'.
    ls_bapi_head-quality_view  = 'X'.
    ls_bapi_head-account_view  = 'X'.
these views, I am passing the necessary details to the BAPI . But it is giving me an error ' **Unit of measure ****** is not defined; check your entry**'. plz help me how to solv the problem.
Thanks,
shekar

Hi Vinod,
It was very usefull for me thanks,
I have another problem i have  to pass Valuation Class - bklas and in quality view nspection Type - 'art', Inspection Type - Material Combination is Active - 'aktiv'.
please let me know how to pass these values to FM
thanks,
shekar

Similar Messages

  • Error message :PurchOrder : Unit of measure PC not defined for language ES,

    Hello,
    I am facing a problem with PO replication to R/3 backend.
    POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)'  .
    When I check with 'RZ20' transaction I got this message :
    PurchOrder : Unit of measure PC not defined for language ES.
    SRM 4.0 Extended classic scenario
    Regards,
    Shaiek

    Hi
    This seems to be a configuration issue,.
    Pls maintain the unit of measure in configuration using transaction CUNI
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Unit of measure JHR not defined

    Hi Friends,
    What can cause this problem. I am getting this error message
    "Unit of measure  JHR  not defined"  after I am creating a Shopping card in EBP.
    JHR is existing on both sides Backend and EBP in the table T006.
    Regards
    Marco M.

    COM_PRODUCT_UNIT
    you need to debug this program . JHR is not SAP or international UOM . it could be customised one
    COM_PRODUCT_UNIT_READ_API
      Is a unit of the product convertable into i_unit?
        CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
          EXPORTING
            meinh                       = iv_unit
          EXCEPTIONS
            dimension_not_dimensionless = 1
            t006d_entry_missing         = 2
            t006_entry_missing          = 3
            OTHERS                      = 4.
        CASE sy-subrc.
          WHEN 0.
            MESSAGE e020(com_product_unit) "unit is dimensionless
                   WITH iv_unit
                   RAISING unit_not_allowed.
          l_lines = l_lines + 1.
            CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
              EXPORTING
                i_base_unit     = ls_base_unit-unit
                i_alt_unit      = iv_unit
                i_tabix         = l_lines
                it_pr_unit      = lt_pr_unit
              IMPORTING
                e_add_const     = l_add_const
                e_numerator     = l_numerator
                e_denominator   = l_denominator
                e_unit          = l_unit
                e_sub_num       = l_sub_num
                e_sub_denom     = l_sub_denom
              EXCEPTIONS
                not_convertable = 1
                overflow        = 2
                OTHERS          = 3.
            CASE sy-subrc.
              WHEN 1.
                MESSAGE e020(com_product_unit)
                      WITH iv_unit
                      RAISING unit_not_allowed.
       CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
              EXPORTING
                i_base_unit     = ls_base_unit-unit
                i_alt_unit      = iv_unit
                i_tabix         = l_lines
                it_pr_unit      = lt_pr_unit
              IMPORTING
                e_add_const     = l_add_const
                e_numerator     = l_numerator
                e_denominator   = l_denominator
                e_unit          = l_unit
                e_sub_num       = l_sub_num
                e_sub_denom     = l_sub_denom
              EXCEPTIONS
                not_convertable = 1
                overflow        = 2
                OTHERS          = 3.
            CASE sy-subrc.
              WHEN 1.
                MESSAGE e020(com_product_unit)
                      WITH iv_unit
                      RAISING unit_not_allowed.
              WHEN 2.
                MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                        RAISING overflow.
    E        COM_PRODUCT_UNIT       020     Unit of measure & is not defined for product
    When do you get this error ? while ordering Internal goods and services or describe procurement?
    or while procure from catalog.

  • Unit of Measure TON not defined for language PT ?

    Hi all,
    I'm new to MM and to SAP in general and I have 2 questions for now :
    1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
    I also can not convert TON into EA...any ideas why?
    2. How can I see the total value of a PO that has many lines ?
    Thank you very much
    Iuliana

    Hi
    Is this error  "" Unidade de medida *** não definida em idioma PT ""
    appearing only when you select Ton, or any other unit.
    pl. clarify.
    I have seen that you get this message when your loging Login language is Portuguese.
    Any how Configuration of units needs to be checked in
    Spro >General setting > check Units of measurements ,
    ( or pl. use Tcode --  Cuni )
    I also can not convert TON into EA...any ideas why?
    can you give me some more inputs, what erro are u getting ?
    2. you can see the total Po. values in Po header details
    under status tab view.
    if my soln is found usefull
    Pl. award me points
    Thanks
    Prasanna kumar .b.a

  • Unit of measure EA not defined for language PT

    Hello,
    Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
    "Unit of measure EA not defined for language PT"
    Table 006A contains no entry for this unit of measure.
    We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
    Checked  T006A table for "EA" found for language "EN, DE, CN etc. not for "PT"  how to maintain T006A table for Portuguase langauge.
    Regards
    Mahesh Naik

    >
    Mahesh Naik wrote:
    > Hello,
    >
    > Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
    No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

  • " Unit of measure ****** is not defined; check your entry in table T006

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in  WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.
      Hi Itzell T,
          While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
          So, functional consultant should take care of this issue just let him know the message.
       He know what problem actually is and fix the problem as Ankur had said.

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • Unit of Measure BOX not defined in language DE

    Hi Experts,
    We have a Unit of measure BOX, it is used in a Purchase Requisition.
    When converting this PR to PO the vendor entered has the language German(DE) and system throws out an error message mentioned in the subject.
    I have checked in SPRO under UOM settings and found that this has been maintained for all the languages the path I have checked is SPRO --> SAP NetWeaver  -->General Settings  -->  Check Units of Measurement -->  ISO Units --> Select the UOM (BOX) and then in Menu options (Goto --> Translation).
    Can anyone help me out what can be the other possible reasons.
    Thanks a lot in advance.
    Regards
    Lucky.

    Dear Lucky,
    Normally this issue happens because a missing entry for unit in transaction CUNI.
    To maintain this, enter the transaction: CUNI
       Click "Unit of Measurement" and maintain the following as below.
    Unit           : XX
    Commercial     : XX
    Technical      : XX
    Meas.unit text : Activ.unit
    Please review SAP Note No.[15430|https://service.sap.com/sap/support/notes/15430]
    Regards,
    ian, Wong Loke Foong

  • Unit of measure EA not defined for language RU

    Hi gurus,
    have you encountered this error while creating a PO? can't find any supporting document online.
    please help how to resolve.
    thanks,
    mm

    Hi Manohar,
    Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
    Instead, we just maintained the vendor master to be in EN language to stop the system error.
    thanks for your input anyway.
    melanie

  • Base unit of measure can not be changed since EAN is already assigned.

    Hi,
    We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
    "Base unit of measure can not be changed since EAN is already assigned."
    Could you help to resolve the same.
    Thanks,
    Amit

    Hi,
    Thats correct you must be getting Error message M3 341 ,
    EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
    EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
    The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
    manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
    If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
    for EAN or external ..etc
    Thanks
    Diwakar

  • U2018Ea unit of measure has not been created in the language ES u2018in srm

    Dear Friends,
    I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
    Also in comm_hierarchy also i  chked for product category language maintenance and found maintained in EN,ES languages.
    u2018Ea unit of measure has not been created in the language ES u2018
    I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
    Regards,
    William

    Hi Willam,
    When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
    I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
    For further details please have a look on
    http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
    where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
    Kindly confirm.
    Thanks
    Rajesh K

  • Views and Base unit of Measure is not coming in Chines Lang

    HI All
    Plz Help me.
    I log-In Chines Server, during MM01 the views are coming in English language instead of chines.
    and  during PO creation The Base unit of Measure is not Coming in Chines Language it is displaying Some number??
    I have maintained Source and taget lag in CUnI..but still Im getting this problem..
    How to solve this plz help..
    Thanks and regards
    Ramesh reddy

    Hi
    Please maintain the translation in the Following Configuration
    Logistics - General->Material Master->Configuring the Material Master->Define Structure of Data Screens for Each Screen Sequence
    Select the Specific Screen Sequence & Maintain the languages
    Similarly please maintain the Translations in the Transaction CUNI for the Base UOM in respective languages
    I hope currently in your system only Language EN is maintained
    Thanks
    Madhav

  • Unit of measure is not maintained at level2 DSO

    Hi Experts,
    Unit of Measure is not maintained in level2 DSO.
    Scenario:
    We have a Product having values for different market in DSO UOM is Millions and Aggregated Value of that product is loaded in upper level DSO Unit of Measure is not maintained it shows blank.
    Solution: We have done selective deletion and uploaded again from the DSO where UOM is maintained correctly, Issue is resolved.
    We would like to know the cause of the issue.
    Please any let me know how to isolate the issue and if you have time let me call you to investigate further.
    Regards,
    Prem

    Hi Murali,
    UOM is maintained in level1 DSO correctly and for certain aggregated values it is not maintained and this very strange if we do manual upload data UOM is correct in Level2 DSO.
    I guess issue happening in regular data load or what so ever....
    We are trying to correct the data just by deleting and uploading again as this is permanent solution.
    If routines are the issue when we upload manually it shouldnt work but still working fine... this strange behaviour....
    please suggest and advise me... if required let me call you.
    Regards,
    Prem

  • Error message TD427 (A text element is not defined for form J_1IEWT_CERT)

    Hello,
    Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
    Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
    If i try the printpreview through SE71 it shows without error.
    Thank You.

    "test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
    The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form.

Maybe you are looking for