Error in BDOC
Dear Sir,
I run t-code : smw01 and found the error " Mapping Error"
How to correct it? Please kindly advise . I don' t know how to investigate the problem
Thank you and best regards,
Vimol
Do you still have thiss issue ?
Similar Messages
-
Error CHARVAL_MSG Bdocs
I am having some errors in smw01 on CHARVAL_MSG Bdocs ,
the error states :
SMW3 Technical error occured: Service , BDoc type OBJCHARACTERIS, Message Object already subscribed. Bulk
SMO8 Service that caused the error: CRM_CHARVAL_MSG_MSA
Error overview :
BDoc State E01
BDoc State Description Technical error (incomplete)
BDoc Type (Generation Name) CHARVAL_MSG
Flow Context MO1
Flow Context Description mBDoc Notification
Send date 05.04.2007
Queue name CSACHARVAL457EE6B4DE
DDIC type of classic part of BDoc /1CRMG0/CHARVAL_MSG
DDIC type of extension part of BDoc CRMT_MKTPROF_MBDOC_CHARVAL_TAB
BDoc Message Identifier 4614FE01FA40202C00000000A7690A0E
Root ID 457EE6B4DE8E006800000000A7690B0B
Can anybody help me on how to resolve this issue or can anybody explain where I should start in order to verify what caused the error ?Hi Wim,
Currently I am facing the same issue, could you please let me know how you resolve the issue.
Regards,
Harish. -
Inbound qRFC Error/unwanted BDoc's on SolMan
Hello,
I experience the problem described in Note 1960627 - Inbound qRFC Error/unwanted BDoc's on Solution Manager System.
I would like to deactivate the creation of the BDoc's in SMW3_00 but am at a loss here: How do I actually do it?
Best Regards and thanks for your help in this !
ThorstenPlease check dumps in ST22 and for the mentioned job in SM37 (RDDEXECL).
Markus -
Hi Experts
Daily we have BDOCS with Bdoc state description "Mapping error" and following errormessage "Processing of document with Guid DEE4C70ABC20D1F18A4900101825B820 is canceled" and " Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
When we reproces the Bdoc it works and the error dissapears.
The errormessage is not very informative so we don't know what the original error is and we would like to avoid the reprocessing of the BDOCS.
Do you know the rootcause and how to avoid these errors?
best regards
Jørgen JensenPlease check the following OSS note and implement the corrections that are suggested.
SAP Note 629016 - Automatic restart of BUS_TRANS_MSG -
Specify card type error in Bdocs
Hi,
We need to download customers from ECC to CRM , when executed , there is no error captured in SMQ2.
But the BDocs are generated in SMW01 and found R1561 error with error u2018Specify a card typeu2019.
Can anyone suggest what needs to be done to fix this problem?
Thanks & Regards,
Shwetha.Hello Swetha,
Can you pls share what exactly you have done to resolve the issue?
Thanks & Regards
Sreedhar -
Error- Update Bdoc status failed- R3AD_Accounting
Hi ,
We are trying to replicate service order from CRM to r/3, after saving a service order in SMW01 it shows error "No r/3 upload"
In SMQ2 there is a queue R3AD_Accounting with status SYSFAIL stuck with the error message "Update BDoc status failed - BDoc not found"
In R3AC1 the object Accounting does not have any entries for tables or initial flow context.
Please let me know where we can maintain the entries for this Adapter object-Accounting.
Regards
PrathibaTry releasing the queue, might be a temporary problem.
If not, check out the lockings in transactions sm13 (or sm12: I'm not sure).
Michael. -
Error in BDOC while uploading the pricing condition record to ECC from CRM
Hi all,
I have created a condition record for ECC pricing condition type (I have maintained all settings required for maintaining ECC condition type in CRM 7.0) in CRM 7.0. But theis condition record is not uploaded to ECC. I have checked BDOC, it is showing with error status for BDOC type "CND_M_SUP". The errors are as below.
1. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
2. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
3. Service that caused the error: CND_MAST_INT_DEEP_MB_TO_SBDOC
Message no. SMO8047Diagnosis
A service caused/ reported an error.
Can some one help me in fixing this issue please.
Thanks in advance,
JM
Edited by: JM on Sep 7, 2010 4:46 PMHi,
sBDOCs are not used in ECC to CRM or CRM to ECC data replication scenario. You can either ignore the error or disable mobile bridge.
Regards
Prasenjit -
Error in Bdoc '....Editing was terminated'
Hi All,
I am replicating the BP from CRM to ECC using BDoc type 'Bupa_main' when the BP
is saved under some role.
When I save the BP , the Bdoc shows in error 'Partially send, receivers have errors'.
After reprocessing the Bdoc in transaction SMW01, 1 entry is created in KNA1 and CRMKUNNR,
but no BP is created. The error list in transaction SMW01 is shown as
Messages for business partner 0100000252: XR 100
....Editing was terminated FB 13
I checked in ST22, there are no runtime errors.
I tried CRMM_BUPA_MAP, there I get the message as
'005 4AF79F489B97018: Object is in status Running'
And there are no queues in SMQ1 or SMQ2.
Any idea why it is happening or how to solve it?Hi Aditya,
The problem is mainly because of some user exits in your system.
So, if its possible, deactivate all the user exists from table : TBE24 and TPS34 in your system and try again.
And also check in the ECC system - CRMRFCPAR table field SEND_XML is set to "X". If both CRM and ECC are unicode system, then the SEND_XML field in the CRMRFCPAR table in the R/3 system should be set to "X"..
Also refer the following notes :
928974
788871
621470
1049761
Hope the above information would help you to solve the issue.
Best Regards,
Vignesh Ravikumar -
Hi All - I am upgrading from CRM2007 to 7.0 and I am facing a issue in XPRA_UPG phase where there are unprocessed BDocs. I used transaction smw03 to display them, but I am not sure how to process them or delete them.
A2PE/SAPCND/CUSTOMIZING 212 Generation for application "CRM", Usage "BO" and table "SAP12132" failed
A2PECND_MAST 299 Generation interrupted; process mBDocs first (see description)"CND_M_SUP"
A2PE/SAPCND/GENERATOR 215 Generation was prevented by an object.
A2PE/SAPCND/CUSTOMIZING 212 Generation for application "CRM", Usage "PR" and table "SAP12132" failed
A2PECND_MAST 299 Generation interrupted; process mBDocs first (see description)"CND_M_SUP"
A2PE/SAPCND/GENERATOR 215 Generation was prevented by an object.
Any input will be appriciated.
Regards,
KHi,
Have you got the answer to this question? I am also getting this error while upgrading CRM2007 to CRM7.0 in XPRAS_UPG phase.
CURRENTPHASE XPRAS_UPG
1PEPU203X> Messages extracted from log file "SAPR701WD1.CMS" <
Long text:
Cause
During the upgrade, a message relevant for postprocessing was written
to a log file. This message is not dealt with until the end of the
entire upgrade. The upgrade continues.
System Response
The upgrade stops in phase CHK_POSTUP. To create the reference to the
original log file, this message is generated by R3up.
What to do
Note the messages following this message and proceed according to the
instructions.
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12130": Incompatible change (Description)
Long text:
Cause
You have tried to generate a CDB table. By doing so, the already
existing table has been changed in such a way that the corresponding
synchronization BDoc has been made incompatible. The incompatible
change could lead to data loss, and is therefore only possible with the
help of the CND_MAST_GEN_TRANSFER_OBJECTS report. This report should be
executed online.
System Response
Generation of the CDB table is terminated.
What to do
Inform your system administrator.
Tasks for system administration
Check whether the table, and therefore, also the BDoc may be made
incompatible. If this is the case, execute this with the
CND_MAST_GEN_TRANSFER_OBJECTS report.
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12131": Incompatible change (Description)
Long text: see above
A2PECND_MAST 271 Error when generating table "CMBCCPSAP12132": Incompatible change (Description)
Long text: see above -
Hi,
We are trying to maintain relationships for a BP through adapter object "BUPA_REL".
When executed , there is error in SMQ2 with Error in Mapping (Details: transaction SMW01).
Have checked in SMW01 and found E08 errors with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019.
Can anyone suggest what needs to be done to fix this problem?
Thanks & Regards,
Shwetha.Hi,
We are trying to maintain relationships for a BP through adapter object "CUSTOMER_REL".
When executed , there is error in SMQ2 with Error in Mapping (Details: transaction SMW01).
Have checked in SMW01 and found E08 errors with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019.
Can anyone suggest what needs to be done to fix this problem?
Thanks & Regards,
Shwetha. -
Credit card error in bdoc for ecc to crm
I am getting an error R11 144, No credit card details found, when an ECC customer master record has a credit card on it and it is flowing to CRM 7. If you have encountered this error, how did you fix it? I have searched with no success.
I believe I may be getting the R11 144 error after I get a R1 561 because the card doesn't load into crm, so when doing a delete or change to the customer in ECC, the system looks for a card in CRM to delete and there isn't one. So how to get rid of the R1 561 error then? It is not an auth object issue as I have seen in some responses. The card number and card type are not getting loaded into the bdco, but the expiration date is. I have logged a ticket with SAP but just keep going back and forth with them. Hoping someone has been through this before. Thanks.
-
Error in BDocs:SMOH_REPLICATION_WRAPPER_MSG
Hi
When I am downloading customer data to CRM, following errors are being displayed.
although customer is replicated completely, but following error message is displayed in smw01
1) Service that caused the error: SMOH_REPLICATION_WRAPPER_MSG
2) Could not determine module name: BUPA_MAIN GENKEY: REP_GET_RECIPIENT
Please help me in solving this, I am a bit stuck.
Thanx in advance.
Cheers
HitsmHi Hitesh,
Execute Transaction: GENSTATUS
From the left panel double click on the record with red traffic light and then select all the records selected in right panel, click on Generate/Check.
Once this is successfully done.
Try to download the object.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
hi experts,
In transaction smw01 we are getting error message,while processing any account.
But we haven't set any such message,can you leet us know,where could be the origination of such messages?
Also we have checked in se91,but havent set any such messagehi,
thanks for the reponse.
the message number is ZZ 27 description "Customer Code cannot contain blanks in the beginning",which suggest it is a custom message,but we havent set any such custom message in our system.
Any idea from where we can trace this?
Edited by: Anu_87 on Oct 1, 2010 3:13 PM -
When ever there is an error in BDocs its going to everyones inbox. Is there a way to send this message to just to one person?If So how?
Transaction smw00.
Michael. -
Bupa_rel : Bdoc type error
Hi Gurus,
we are getting the below error in Bdoc type BUPA_REL. in production , it shows Red symbol in smw01
Service that caused the error: BP_REL_CRM_TO_CDB
How to solve this errors?? what does it mean? Are we missing anything???
Thanks ,
shokiDear Garhard,
Thanks i got the answer why iam getting this error. but,
I have checked the TX: SMW3FDCUST check box is activated for function name BP_REL_CRM_TO_CDB and BP_MAIN_CRM_TO_CDB.
Now the question is should i deactivate both the Functions ,because i am getting the error in only BP_REL_CRM_TO_CDB ???
one more thing does it impact any where if i deactivate the check box for BP_REL_CRM_TO_CDB??? because due to this error we didnt struck in process we are manually deleting this.
pls suggest as i am new to middleware.
Regards,
shoki
Maybe you are looking for
-
Problem while configuring email system in service desk message
Hi all, I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that
-
I have upwards of 40,000+ images in my referenced Aperture library. I create a folder for each year and a project for each shoot. I'm fairly diligent about adding keywords and keeping my files clean but as the cameras keep getting better the megapi
-
How to use Oracle BIP Webservices using JAX-WS
Hi everyone, Has anyone trieed invoking BI publisher web services using JAX-WS. I tried with Apache Axis technology as per the documentation [http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/bip_webservice_101331.htm] and it worked fin
-
Re : Roles of Functional Consultant in upgradation from 4.6b to ECC 6.0
Hi I need the Roles of Functional Consultant and Technical Consultant in upgradation from 4.6b to ECC 6.0. Thanks Anto
-
Hi All, I am learning J2EE technology. Please suggest me any book which gives complete procedures like packaging an application in war, ear format, deploying applications, web applications directory structure and other details on various application