Error in bpm!

Folks, in this test in the Q env, the bmp errors out with the below stated error.
this is the first test on Q after a transport...any inputs?
Work item : Object FLOWITEM method EXECUTE cannot be executed

sorry about the confusion:
Here is the thing, in the PE moni......monitoring with technical details
there is a failure at the mapping(transfrmation) step. this is really weird, because it works fine on Dev.......
this is the sort of error that comes up: its cracking me out....
RESULT PROCESSING:
PROCESS_NODE: Error when processing node '0000000028' (ParForEach index 000000)
CREATE: Error when creating a component of type 'Dynamic Fork'
CONSTRUCTOR: ParForEach table element contains 2722 entries (only_____________
looks like this is a detailed error . Is there a way where i can drill down to the detailed message for the Constructor?
Do i have do change some settings on my BPE on Q, looks to me like the table element entries need to be increased?
Please correct me if i make no sense.
Thanks a lot,,
Hank
Edited by: hankovak jovani on Apr 8, 2009 2:00 AM

Similar Messages

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Sync/Async brdige error in BPM

Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.

hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu.

Mapping Errors in BPM

Hi All,
How can the mapping errors in BPM be handeld implicitly (without the use of Exception Handling Branch)
Regards,
Anurag

Hi Anurag.
Handling the mapping exceptions in BPM could be possible using the Alerts.
Go through this blog for Alert Configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
And also go through this thread:
alert in BPM
Hope this helps you.
Regards,
Hari.

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

Block1 (No agent) Error in BPM ?

Hi friends ,
 I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver ?
 I am Clear in this please give some suggestions
Best Regards.,
V.Rangarajan
Best Regards.,
V.Rangarajan

Hi,
 Thanks for your reply.
 once the files are connected in the transformation step you will use a N:1 mappping.
 Yes , i have done as same . I have set deadline as 15 minutes .
My doubt is
 if N:1 
First File
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
SecondFile
ID as A100
OverAllNumber as 130
 Then what will be the output ?
 will it be like this
 ID as A100
 OverAllNumber as 130
 I am not clear in this Please tell me !
 If possible please give some suggestion to clear this Block1 (No agent) Error in BPM ?
Regards.,
V.Rangarajan

Error in BPM: FIle to RFC

Hi friends,
   I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message   = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.

I am getting error in Integration Engine.....
Attribute     Value
Engine     Integration Engine
Status     System Error
Repeatable     No
Cancelable     No
Start     20.06.2007 06:25:22
End     20.06.2007 06:25:22
Sender Party
Sender Service     BPM_FILE_RFC_SAGAR
Sender Interface     http://File2RFC_Syn
FileRequest_AI
Receiver Party
Receiver Service     ECCIDOC800
Receiver Interface     urn:sap-com:document:sap:rfc:functions
BAPI_SALESORDER_GETLIST
Quality of Service     Best Effort
Error Category
Error Code
Message     9BA7365DDBC0FE49B9F512F7308DDA53
Reference

Error in BPM with multimapping.

Hi,
I've got next error in a transfromation step of bpm with multimapping :
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Version 931D4B005DF711DFC0CACC330A640786</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type JAVA , Program com/sap/xi/tf/_MM_I3934_REPLICA_BBY_</Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload</Trace>
<Trace level="3" type="T">Mapping has exactly one source message</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Executing multi-mapping</Trace>
<Trace level="1" type="T">while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' Thrown: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' at com.sap.guid.GUID.parseHexGUID(GUID.java:1046) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:127) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:140) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.GeneratedMethodAccessor804.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1098.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)</Trace>
</MappingTrace>
However i've tested with same input message in Operation Mapping ESR, without any error.
What could be the cause?
Thanks, in advance.
Carme.

Hi,
Are you using parameterized mapping or RFC lookup in your mapping???? If yes, please make sure that you are passing the parameter in the interface determination instead of null value.
Also verify whether your cache is updated with the latest GUID of your mapping program or not.
Regards,
Priyanka.

Error in BPM (No receiver agreement found from sender to bpm)

Hi all
In a simple bpm scenario, I am getting a error that No receiver agreement found for sender service to bpm integration process.
What might be the reason?

your configuration should like this.
say u are doing File to File using BPM
File to BPM
then BPM to File.
so u need to create RD where sender is fileservice and receiver is BPM.
second u hav to create another RD where BPM is sender and Fileserviceis receiver.
So there should be
one Sender Ag
two RD
two ID
one RA.
Thanks
Farooq.

Error in BPM in PI 7.1 : BPE_ADAPTER" UNKNOWN_MESSAGE

Hi All,
I have made some changes in Integration process in PI 7.1 and executed my interface, but now it is giving error BPE_ADAPTER">UNKNOWN_MESSAGE. Also it is showing "No object type found for the message. Check that the corresponding process is activated".
I have also checked in SXI_CACHE if the integration process is activated or not. It is showing return code 0.
I have deleted my BPM and created same with a new name and created whole ID part again with a new integration process, but the above error is still there.
The process is getting stuck at the CALL ADAPTER step.
Can anyone tell me where the problem occured exaclty?

Satish,
Thanks for replying,
Actually I have created a new integration process wih new name deleting the previous one and then created whole ID part for the new integration process importing the new IP in my ID. Also checked if that new IP is activated in the SXI_CACHE. But still that error is occuring in SXMB_MONI in CALL ADAPTER step. I have not checked the queue in SMQ2 but does it matter as I have created new integration process and ID part agian?

UNKNOWN MESSAGE error in BPM

Hi,
I have transported scenarios in production.
One of the scenario with bpm is working fine.
But in one scenario i am getting the error

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
In trace i found
could not create BPE proxy for message, no XML object definition found for message 48965DEB190A41F3355AC0B710EA2106</Trace>
</Trace>
in sxi_cache the return code is 0 , but still i activated it and still the return code was 0.
but still i get the above error.

Hi,
Where you are facing this issue? In PROD or QA?
Did you tried to remove the locks, and re-activate it? I would say go to SM12 in Abap stack and check what's the corresponding object got locked! But before doing it, please let us know that u r not doing this in PROD. Coz, I don't want to suggest you this approach in PROD.
raj.

Error in BPM: "no interface action for sender or receiver found"

hello,
i configured a interface scenario SOAP - PI - Idoc using a BPM sync/async bridge.
i followed the document
when i try to call interface with my soap client i have the follow error in SXMB_MONI:
Timeout condition of pipeline reached
if i check the detail in trace i can found the follow message:
<Trace level="1" type="T">select interface SI_MATREQ_ABS</Trace>
<Trace level="1" type="T">select interface namespace http://pmf/orders</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
in BPM monitor i cannot see any interesting logs for determine the problem.
I clear cache many time and reimported Integration Process more time.
Have u some suggestion?
thanks in advance

Hi,
Check whether this thread help you or not....
SXMB_MONI: no interface action for sender or receiver found
Regds,
Pinangshuk.

Error in BPM application in calling web service

Hello,
I have created a BPM application with 3 steps first 2 are human steps and third one is automated step which calls web service interface via WSDL (external system).
On third step my process goes to failure and has below error.
any help.
com.sap.glx.core.kernel.api.TransitionException: An exception occurred while executing the script "_Vehicle_Insurance_Proposal_Process:AUTOMATED_ACTIVITY_Enter_Contract_into_Alice(
      com.sap.glx.adapter.BPMNAdapter:Token_0_Vehicle_Insurance_Proposal_Process_fe3c0f2f9854595480f1540a14a9dff8 token,
      com.sap.glx.adapter.BPMNAdapter:Instance_0_Vehicle_Insurance_Proposal_Process_fe3c0f2f9854595480f1540a14a9dff8 parent,
      com.sap.glx.adapter.internal.ContainerAdapter:Context_0_DO_Context_fe3c0f2f9854595480f1540a14a9dff8 context_0){
exit=new com.sap.glx.adapter.BPMNAdapter:Exit();
exit:addParameter(token);
exit:addParameter(parent);
exit:addParameter(context_0);
exit:onActivation("4A953ED620341B80924811DECB86002170E8BE7E", parent, token);
delete exit;
controller=new com.sap.glx.adapter.internal.ExceptionAdapter:ExceptionController();
controller:setContext(token);
delete controller;
callscope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_0_Vehicle_Insurance_Proposal_Process_fe3c0f2f9854595480f1540a14a9dff8(parent);
call=new com.sap.glx.adapter.UnifiedConnectivityAdapter:Call_0_Enter_Contract_into_Alice_fe3c0f2f9854595480f1540a14a9dff8(callscope);
request=callscope:instantiate("urn:sap-com:document:sap:soap:functions:mc-style", "4A96538007F4ED1192ED11DECAA6002170E8BE7E");
mapper=new com.sap.glx.adapter.internal.Transformer:DataMapper();
yves_in=new com.sap.glx.adapter.internal.Transformer:Data();
yves_out=new com.sap.glx.adapter.internal.Transformer:Data();
yves_out:setData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebService", request, "834EAE2B040BBEAC78BAF131CDC66B6B");
mapper:map("4A953ED620341B83924811DE8E24002170E8BE7E_fe3c0f2f9854595480f1540a14a9dff8", yves_in, yves_out);
request=yves_out:getData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebService", "834EAE2B040BBEAC78BAF131CDC66B6B");
delete yves_in;
delete yves_out;
delete mapper;
call:setInputData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebService", request);
response=callscope:instantiate("urn:sap-com:document:sap:soap:functions:mc-style", "4A96538007FC190192ED11DE98EE002170E8BE7E");
call:setOutputData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebServiceResponse", response);
call:invoke();
response=call:getOutputData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebServiceResponse");
mapper=new com.sap.glx.adapter.internal.Transformer:DataMapper();
yves_in=new com.sap.glx.adapter.internal.Transformer:Data();
yves_out=new com.sap.glx.adapter.internal.Transformer:Data();
yves_in:setData("urn:sap-com:document:sap:soap:functions:mc-style", "$urn:sap-com:document:sap:soap:functions:mc-style:ZTstWebServiceResponse", response, "834EAE2B040BBEAC78BAF131CDC66B6B");
data=context_0:getData();
scope=new com.sap.glx.adapter.internal.TypeRegistry:GenericScope(null, "D344D8196275E4C40D7D4B131B0136BB");
copy=scope:copy(data);
delete scope;
yves_out:setData("sap.com/glx/", "$sap.com/glx/:DO_Context", copy, "D344D8196275E4C40D7D4B131B0136BB");
mapper:map("4A953ED620341B85924811DEBFFC002170E8BE7E_fe3c0f2f9854595480f1540a14a9dff8", yves_in, yves_out);
data=yves_out:getData("sap.com/glx/", "$sap.com/glx/:DO_Context", "D344D8196275E4C40D7D4B131B0136BB");
context_0:setData(data);
delete yves_in;
delete yves_out;
delete mapper;
delete call;
delete callscope;
token:state=3;
com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:69)
com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:241)
com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:118)
com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:116)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAs(Subject.java:337)
com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:114)
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
java.security.AccessController.doPrivileged(Native Method)
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169)
Regards,
Naeem

Hello,
I have found some Debug entries into my log file when this BPM process executes and go in Suspend mode. I do not understand the error. But this Begun entries have Green symbol which I understand there should not be any problem. But then why my process goes to Suspend mode??? If you like then I can also provide this Debug entry message from log file in order to get the idea about this problem.
I use Logical destination on automatic BPM step. Which has WSDL link. This wsdl link I have test into WS Navigator which works fine. But I am wondering why it is not working in my BPM process?????
does any one has idea what to do?
Regards,
Naeem

Processing Schema Validation error in BPM?

Hi all,
We have a file to IDOC scenario where if the schema validation fails on the file adapter sender agreement, we want to pull the filename and send it in an error email. So, we are talking about the adapter specific message attribute "Filename".
unfortunately, this does not seem to be available as a container element for alert catagories in ALRTCATDEF. So, we are starting to look into using BPM to send a email via the email adapter. However, since the validation happens prior to BPM being called I am at a bit of a loss. Any ideas on how to get the email with the filename out to the suport group would be appreciated.
Thanks,
Chris

package com.validate;
import com.sap.aii.mapping.api.*;
import com.sap.aii.mappingtool.tf7.rt.Container;
import java.io.*;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.*;
public class ValidateXML extends AbstractTransformation {
 public void transform(TransformationInput transformationInput, TransformationOutput transformationOutput) throws StreamTransformationException {
 OutputStream outputstream = null;
 try {
 InputStream inputstream = transformationInput.getInputPayload().getInputStream();
 outputstream = transformationOutput.getOutputPayload().getOutputStream();
 byte[] b = new byte[inputstream.available()];
 inputstream.read(b);
 String XMLinputFileContent = new String(b);
 // define the type of schema - we use W3C:
 String schemaLang = "http://www.w3.org/2001/XMLSchema";
 // get validation driver:
 SchemaFactory factory = SchemaFactory.newInstance(schemaLang);
 //Place XSD file in PI server same as http://help.sap.com/saphelp_nwpi711/helpdata/en/44/0bf1b3ec732d2fe10000000a11466f/frameset.htm
 //OR I think you can place any where on server.
 File XSDfile = new File("C:/xi/runtime_server/validation/schema/SchemaFile.xsd");
 // create schema by reading it from an XSD file:
 Schema schema = factory.newSchema(new StreamSource(XSDfile));
 Validator validator = schema.newValidator();
 // at last perform validation:
 validator.validate(new StreamSource(XMLinputFileContent));
 //If XML it not valid, exception will be thrown, if it is valid sent this PassOutputXML to output
 String PassOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>FileName.txt</Name><Validation>Pass</Validation> </ns:MT_OutputXML>";
 outputstream.write(PassOutputXML.getBytes());
 } catch (Exception exception) {
 //Get File name using http://help.sap.com/saphelp_nwpi711/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
 Container container = null;
 DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
 DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
 String inputFileName = conf.get(key);
 String FailOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>" + inputFileName + "</Name><Validation>Fail</Validation> </ns:MT_OutputXML>";
 try {
 outputstream.write(FailOutputXML.getBytes());
 } catch (IOException ex) {
 exception.printStackTrace();
 ex.printStackTrace();

HTTP time out Error in BPM.....

Hi
Error Description:
We have created a Sync-Async Bridge BPM scenario in XI.
In the BPM scenario we are calling the web service, and if the response from the web service is an error message then we have retry in a loop up to 24 times after wait for every 1 min.
We are sending the data to the web service using a proxy created in the R/3 system.
We are getting the time out error in the R/3 system.
We have changed the following parameters in XI.
In SXMB_ADM of XI we have set the value for the following parameter.
Category parameter current value
SA_COMM CHECK_FOR_ASYNC_RESPONSE_TIMEOUT 120
In SXMB_ADM of R/3 we have set the value for the following parameter.
Category parameter current value
RUNTIME HTTP_TIMEOUT 120
When we put the value as 120 for the above parameters and we try for 2 times in the BPM process, then it is sending the response back to the R/3 system after completing the whole BPM process.
But when we increase the no of retries in the BPM process then it is not sending the response back to the R/3 system in the same way, at that time we are getting the error in SXMB_MONI of R/3 system as given below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="500" p2="Timeout" p3="" p4="">HTTP.HTTP_STATUS_CODE_NEQ_OK</SAP:Code>
<SAP:Text language="EN">HTTP status code 500 : Timeout</SAP:Text>
</SAP:ErrorHeader>
Please provide the solution for the same.
Many Thanks
Rinku Gangwani

Hi Prateek,
Thanks for your replay. I am able to open the URL from XI/PI.
I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
Error is:
In MONI:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
In RWB:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
What could be the reason?
Regards,
Venu

Runtime errors in BPM

Hi all,
We have a transformation step that is generating mapping errors at runtime. We do not see alerts generated by default on the alert framework for these errors. Is this expected? Should we be implementing the alert generation specifically inside the BPM using exception block (if it alerts are not generated by default)?
Thanks

Hi,
If you are using BPM, it is prefer to throw an Alert from BPM itself. Anyway if you configure the alert for Message Mapping, if there is any Runtime Mapping Errors it should throw alerts.
Btw, you can cross check this guide to find more tips:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
So It should show alerts for Transformation Error if you configure the Alerts correctly
Hope this helps,
Rgds,
Moorthy

Error in bpm!

Similar Messages

Maybe you are looking for