Error in Call Adapter step

Hello,
We have RFC --> HTTPS scenario.
The RFC Destination of type G is created in XI and the connection test is working fine.
When I run this scenario, sometimes I get following error:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Error in sxmb_moni in Call Adapter Step:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However sometimes it works fine.
Please help to resolve this.
Thanks in advance,
Hetal

Hello Hetal,
Can you please elaborate more on the scenario. if it is a RFC -> PI -> SOAP scenario please check if you are using the correct target URL in your Receiver Comm. Channel. Also check if the backend service could be unstable due to network load.
Thanks.
Kiran

Similar Messages

Error in Call Adapter Step in BPM

HI,
Go to Transaction: SXI_CACHE and check the return code for your intergration process, it must be 0.
Thnx
Chirag

Hi chirag Gohil,
Thanks for your help, i checked the Return Code in SXI_Cache.
Return Code value is 99
what should be done to get the return code as 0. Please Help.
Regards,
Varun Reddy.K

Two "Call Adapter" step in SXMB_MONI

Hello Experts,
I have developed Sync interface WebService - PI - BAPI.
However when message is failing due to error in mapping at response side, there are 2 "Call Adapter" steps in sxmb_moni got that message.
First Call Adapter step is not in error status, however 2nd Call Adapter is in Error status (System Error- Restart not possible).
Could you please explain me why there are 2 "Call Adapter" steps? Actually there has to be only one step.
Best Regards,
Manisha

First Call Adapter step, there is no error
but in 2nd call adapter error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Z_BAPI_VL10_DLVY_CREATE_resp_2_~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns1:Order/OrderD</SAP:P3>
<SAP:P4>etail/ListOfItemDetail/ItemDetail. Values missing~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_Z_BAPI_VL10_DLVY_CREATE_resp_2_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:Order/OrderDetail/ListOfItemDetail/ItemDetail. Values missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
both call adapter steps are under "Central client" step. why 2 call adapter in one?

File-IDoc scnario : Error in call adapter

Hi Experts,
I have developed File to IDoc scenario. And getting the following error in "Call Adapter" pipeline step. I have mapped the control record values in IDoc like Sender Partner, no, port and same for receiver.
Have created:
In XI: RFC destination to connect to ECC (sm59)
Port for the above RFC sestination (idx1)
In ECC: New logical system for source file system (BD54)
Partner Profile for Source (we20)
Also in Receiver_IDoc_CC, checked options for 1. Apply control record values from payload 2. Take Sender and Receiver from Payload
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPEAQ_100, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please tell me if i am doing any mistake.
Br,
Nilz

Hi,
Adding to Björn
Check the Port ( Tcode - idx1 ) Port SAPEAQ_100 & Select the Business System where you declared IDOC adapter -go to - Service and check whether you have mentioned the right Logic System,System ID & Client.
Cheers
Agasthuri Doss

Error in Call Adapter

Hello,
We have RFC --> HTTPS scenario.
The RFC Destination of type G is created in XI and the connection test is working fine.
When I run this scenario, sometimes I get following error:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Error in sxmb_moni in Call Adapter Step:
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However sometimes it works fine.
Please help to resolve this.
Thanks in advance,
Beena.

Thanks Swarup.
The HTTPS connection is used from XI to third party. XI is not receiving HTTPS request.
Still do I need to enable HTTPS on web dispatcher?
The runtime workbench has following error:
Received XI System Error. ErrorCode: ATTRIBUTE_CLIENT ErrorText: ErrorStack: HTTP client code 110 reason
Transmitting the message using connection http://<dispatcher host>:<http port>/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapter:ATTRIBUTE_CLIENT:.
Thanks,
Beena.

Error in call adapter: Sequence already terminated

Hi sdn experts
We get the com.sap.engine.interfaces.messaging.api.exception.MessagingException: Sequence already terminated error when sending data from PI to the JMS adapter. The error occurs in the step u201Ccall adapteru201D on the abap-stack.
We have been through logs and found no more info than the ones above.
The scenario is backend (proxy) -> PI -> JMS adapter.
We use EOIO in the proxy call by lo_prxy_async_messaging->set_serialization_context. If we change this to another value by debugging the message goes through.
I have checked sdn posts - but I could not find one that solved my problem.
Any experience on this issue?

Hi Aashish Sinha
Thank you for your input
1) Duplicate Message: Not the case (canelled all in both IS and AE, send again with same result)
2) Invalid parameters: Can you be more specific?
3) Payload or Message Format: It is correct - the samme message runs through when changing the serialization_context. That is.. when changing the eioi sequense id in debug. Same message and format is succesfull then.
To my mind the EOIO id in the j2ee stack got mixed up. I do not know where to check this. I have checked for locks in the NWA. There are none.
Kind Regards
Martin

Error in Call Adapter (IDOC- XI- FILE)

Hello,
i have got the following error message in the integration engine monitoring in the "call adapter" part:
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active HTTP response contains status code 503 with the description Service Unavailable XML element Envelope missing in SOAP message header (SAP XI Extension)
What is the AFW application?????

Hi Christian,
Have a look at the following thread, it might be useful
XI Server Malfunction:Error in Receiver Adapter
Regards
Suraj

Error in Call Adapter stage

Hi
I am trying to post to the ECC system using XI Adapter. I get this error at the Call Adapter stage
URL http://host:port/sap/xi/engine call was terminated because the corresponding service is not available.
Here the host is the server name of the ECC QAS and port is the ABAP port in SMICM
How do I solve this error?
Regards

Shabarish,
I guess I got the problem though I don't know how to solve it !
Well, when I type this link in the IE, http://host:port/sap/xi/engine?type=entry, where host is the ECC QAS and port is the HTTP port maintained in SMICM, I get the same error that I get in the SXMB_MONI of the PIQ.
Service cannot be reached
What has happened?
URL http://host:port/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system ERQ with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
I think this error has got nothing to do with the service users in PI and it has something to do with the ECC QAS server.
Regards

Error in call adapter in SXM_MONI

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>MSGGUID 7F8BECB520324BBE088BED6BB02D6CE8: Tag found instead of tag IDOC BEGIN=</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: MSGGUID 7F8BECB520324BBE088BED6BB02D6CE8: Tag found instead of tag IDOC BEGIN=</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i am getting this problem in my error analysis.please suggest what could be the issue.
thanks

Hi,
Check the following things:
1.Try importing the Metadata of the IDOC again in IDX 2
2.You might be trying to post multiple IDOC and you need to changed the occurance to 0..unbounded for IDOC as mentioned in the Blog /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Regard,
Srinivas

Error at Call Adapter stage

Hi.
We are experiencing an error at the 'Call Adapter' stage of the pipeline. It seems as if the message is unable to move from the integration engine to the adapter engine with this error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
The HTML dump says u2013
java.lang.NullPointerException:
        at com.sap.engine.interfaces.messaging.spi.transport.TransportHeaders.setHeader(TransportHeaders.java:169)
        at com.sap.aii.adapter.xi.ms.XIMessage.prepareToReceive(XIMessage.java:1437)
        at com.sap.aii.adapter.xi.ms.XIMessage.prepareToReceive(XIMessage.java:1122)
        at com.sap.aii.adapter.xi.ms.XIEventHandler.onRequest(XIEventHandler.java:791)
        at com.sap.engine.messaging.impl.spi.ServerConnectionImpl.request(ServerConnectionImpl.java:237)
        at com.sap.engine.messaging.impl.core.transport.http.MessagingServlet.doPost(MessagingServlet.java:417)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:163)
        at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:82)
        at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)
        at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:74)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:425)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
        at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
        at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
        at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
        at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
        at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
This occurred after an SLD update. Does anyone know how to fix this issue?
Thanks
Regards
Riaz

Hi guys
1. Sender - Backend ERP (ECC) calling enterprise service, Receiver - SOAP Web service. Both are business systems internal to the network
2. Both sender and receiver are Business systems which are registered in the SLD.
3. This interface was previously working, until the LSD was updated, then it began.
4. PI 7.10
5. All the scenarios which use this type of communication (Proxy to SOAP) are failing at the same stage
I have also logged an OSS call with SAP and they are currently looking at the issue.
Regards
Riaz

CLIENT_CREATE_FAILED error in the Call Adapter pipeline

Hi, all.
i think i've almost done the configuration of XI 3.0(CI + 2 DIs).
SXI_CACHE, SLDCHECK, import of IR, ID objects ...etc. are O.K.
But when i really run some scenarios of,
File Adapter --> XI --> ABAP Proxy or
ABAP Proxy --> XI --> Java Proxy, messages always got error in the "Call Adapter" pipeline of IS with the following message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Cannot register HTTP Client(Exception 1)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any advice appreciated.
Best Regards.

Thanks, guys. Let me update my situation.
i checked and rechecked dest:// ABAP Proxy : Error in Call Adapter step!
For the error message of #3, i already attached message in my previous email.
And following is the error message of #2. Please HELP!!!
- Help
!http://BSDEA03.darwin.denka.co.jp:50000/sap/public/icman/img/theme.jpg|alt=SAP|width=122 height=61 border=0 |src=http://BSDEA03.darwin.denka.co.jp:50000/sap/public/icman/img/theme.jpg!
500 Internal Server Error
Internal Server Error(-1)
Error:
-1
Version:
6040
Component:
ICM
Date/Time:
Tue Jul 26 15:40:19 2005
Module:
icxxthrio.c
Line:
538
Server:
BSDEA03_PDX_00
Detail:
internal error occured
© 2001-2003, SAP AG
</FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 405, error text: ICM_HTTP_INTERNAL_ERROR)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Any advice appreciated.
Best Regards.

Call adapter error --- BPM to RFC

Hi,
I'm calling a simple RFC from a bpm, and the rfc in turn calls a proxy.At the step where i pass the data from bpm to the RFC i get the following error at the call adapter step:
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting a7f68d50-f88a-11db-ad02-001560a7b7a4(INBOUND) into the database: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column</SAP:AdditionalText>
this seems to be some database error, but i'm not insertinga ny data into any table.
Can anyone tell me about this.

Hi-
Check the Data types you have mentioned for attributes.

Call Adapter Error - 401 Unauthorized

Hi,
We are using Multi Mapping where it splits 1 message into n messages. The n messages split by this scenario in trun calls another scenario configured in the same PI server using SOAP Adapter.
The called scenario is SOAP --> Siebel using iWay Adapter.
When the number of messages split are huge in order of thousands, the server is going for a toss and the called scenaio is failing at Call Adapter Step in IE with HTTP Error 401 Unauthorized. Few of the messages manage to pass successfully.
Anticipating your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi Sudharshan,
There can be different reasons for getting HTTP 401: Unauthorized error. As you said, few of the messages are being passed to the called application, I would request you to check the scalability of the Seibel Server.
Also if you are using a connections from a connection pool, then it may be that the pool itself is getting exhausted, though mostly we get Socket exception/Connection Exception/IO Errors in these cases.
The other reasons can be that the user you are using to connect Seibel dont have enough permissions. But it is ruled out as you said some messages have been processed.
If the Seibel server is SSL enabled, and your PI doesn't have any certificate configured, then also you may get such errors.
Regards,
Sugata

Error in SXMB_MONI in SOAP Header -- Call Adapter

Hi ALL,
Got a problem with monitoring activity.
In SXMB_MONI, iam getting errors with Call Adapter section in SOAP HEADER section of the message.
The Error part shows the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting 4657f861-f853-60e8-e100-00000a80314d(INBOUND) into the database: java.sql.SQLException: ORA-25153: Temporary Tablespace is Empty</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody give me a clear picture of the exact error and what could be the diagnosis for this particular problem.
cheers,
Santosh

Hi Santhosh
1.Check your authorization settings in XI and R/3. Whether the user has sufficient rights to execute the Function Module etc. This is the most common reason for this error.
2.If the XI system was brought online even before the R/3 system then re-activate the communication channels from the Integration directory.
Cheers..
Vasu
<u><i><b>** Reward Points if found useful **</b></i></u>

Call Adapter : CLIENT_RECEIVE_FAILED - 405 -ICM_HTTP_INTERNAL_ERROR

Hello,
I'm getting the following message in the call adapter step (even for a simple file to file scenario). We have recently upgraded the system to sp14 from sp9. But the message is going thru after a while. Am I missing anything?
Thanks,
Peter
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>405</SAP:P1>
<SAP:P2>ICM_HTTP_INTERNAL_ERROR</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://sapsidev.europe.ggi:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://sapsidev.europe.ggi:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://sapsidev.europe.ggi:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>500 Internal Server Error</b></H2><br><hr><br>Internal Server Error(-1)<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-1</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Mon Jan 09 17:07:53 2006 </td></tr> <tr><td>Module:</td><td>icxxthrio.c</td></tr> <tr><td>Line:</td><td>1700</td></tr> <tr><td>Server:</td><td>sapsidev_XD7_00</td></tr> <tr><td>Detail:</td><td>IcmHandleNetWrite(id=1/899): No data from server received (rc = -1)</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 405, error text: ICM_HTTP_INTERNAL_ERROR)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>

Hi Elliott!
SAP Software Distribution Center->Download->Support Packages and Patches->Entry by Application Group->SAP NetWeaver->SAP NetWeaver->SAP NETWEAVER 04->Entry by Component->Application Server ABAP->SAP Kernel 6.4
Choose your OS then:
#Database independent:
       dw_109-20000252.SAR
       enq_109-20000252.SAR
       enserver_109-20000252.SAR
Database dependent
       Choose your DB and select the file with patchlevel 109
Regards
Christian

Error in Call Adapter step

Similar Messages

Maybe you are looking for