Error in CF Admin mail test

Hello all-
I've got a new install of CF 11 on Windows Server 2012 R2.  For the first week or so everything was fine, but after a while my email stopped going out.  I looked at the pages generating email, and there was a CF error.
So I went to the admin to verify the connection- Boom- error in the admin!  Every time I attempt to verify my email settings, I get an error.
I do not believe there were any changes made to the server between the time email was working, and when it died.  Potentially a Windows Update, but that is about it.
Any ideas on this one?
Thanks - Karl

Karl, is your problem still happening?
If so, are you sure that your web site (is it IIS) is set so that the CFIDE it points to is the one inside CF11?  We see from the screenshot you shared that inside the stack trace it points to the page as running in some /CFIDE folder (as if it’s the root of a file system—and it’s odd, because there’s no drive reference, which would be there normally on Windows.)
Normally, it should point to the coldfusion11\cfusion\wwwroot\CFIDE folder, which is where CF11 puts that folder by default.  If your web site is pointing at some other folder for that, it could simply be that your Admin was using a different version of code for that mail settings page than CF11 is expecting you to use.
Let us know if that helps.
/charlie

Similar Messages

  • Margin errors in HTML e-mail test

    In a previous post, I had asked for help viewing HTML mail campaign pieces and got the suggestion to try Email on Acid. I did and this was a scream to watch. The results for Outlook (every issue) was less than stellar. However, Gmail reveled the worst results. I use OS X Mail and everything looks great there. The test spits out critical errors. One is that Photoshop doesn't supply a <!DOCTYPE> declaration, but that's easy enough to fix. The consistent errors in Outlook were:
    MARGINHEIGHT- MARGINHEIGHT attribute is not supported in BODY tags
    Line: 7
    and
    MARGINWIDTH - MARGINWIDTH attribute is not supported in BODY tags
    Line:7
    Any ideas what this is and how to fix?
    http://doncamacho.com/dyk_assets/DYK-2012-Template.htmlhttp://
    Thanks,
    Bill Rzasa

    Short answer.  Don't use Photoshop or any graphics app to generate HTML code for you. 
    The code Photoshop generates is deprecated.  Change the following
         <body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
    To this:
         <body>
    Use graphics apps for images only.  Use an HTML editor to create your HTML Emails. 
    FYI: For security reasons, many web mail users don't see graphics.  When I look at your HTML Email without images, I see nothing because there is no real text on the page.
    HTML E-mails, What you need to know.
    http://alt-web.com/Articles/HTML-Emails.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Acrobat 9 Pro  " An error occurred while sending mail"

    Dear Gurus:
    Free ice cream to the person with the answer that works.      I use Vista OS, 32 bit;    IE (Primary) and Mozilla;   Outlook E-mail (primary) and Windows Mail.  The preceding has been the case for the last two years so "nothing has changed".    I used Adobe Acrobat 9 Pro for two years and designed a number of interactive forms and used the functionality as much as possible.   Overall a good experience with Pro 9
    Case in point, I designed an interactive employment application that was regularly used, updated and re-released over a period of about two years without incident.  It was set up to be completed online by employment applicants.  Once completed, they would click to  "e-mail the office"  the completed application then close the document.    It was set up with the button to send a form, and more precisely to send the form as .FDF to the mailto: address#1; address #2.   Again it worked fine using either Mozilla or IE until last week.      As usual, I made some minor edits to the existing body fields and left the buttons alone sine there was no need to bother them.
    I emailed  the revised  .PDF document to   "the web guy" who added it to the website- like all the times before.     I went online to  "test it" as usual so I filled it out.   When I click the button to send form to office, the option comes up to select the email client.   I use Outlook so I selected "Desktop E-mail Application",  click  OK  and then I immediately get the message  "An error has occurred while sending mail".      In the past without fail, the Outlook would open after 1-3 seconds and attach the   .FDF file with the normal  .FDF and data jargon.  no problem...      Also, I am aware of extending features to Reader and the licensing issue, but I doubt that is an issue.....
    So, before I posted here I tried a few things:
    A-  I tried opening the source  .PDF application locally on my PC and filled it out. I clicked the button to "sent the file" to myself.    To be clear this was not posted on the website, but it did open Outlook, create the email, add the .FDF and sent it to me.       HHHMMMM so it works locally....
    B-  Next, I started fresh with a blank adobe document page and added two items:  1- a text field and a new email submit button I created to send the data via FDF.    I set it up, it worked fine when I tested it locally on the PC and created the .FDF file and the Outlook email and I sent it to myself.     Then  I took this same little test file and added it to a different website I have access to, I re-published the site,  ccessed the form and  no dice......    I got the same message,  " an error occurred while sending mail"  when I clicked OK to use the Desktop Email Application.
    C- I read other posts and Googled for about 6 hours yesterday and  now I am missing clumps of hair.
    So, it seems something "happened" that will not let the email be created from an existing form; or a NEW form that are available for use on a website;  but BOTH  work just fine if accessed on a local PC. 
    Please , and thank you..
    Brian P.

    Hi Bill,
    Thank you for your follow up.       I'm not sure what you mean by,  "did I do a comparison to the original".    If you're asking whether I'm sure the .PDF and the .FDF are the "same" documents, they are...  however the problem is even if they were entirely different forms, my issue is once the submit form button is clicked, Outlook fails to initialize and attach the   .FDF file .
    I mentioned how I tried to recreate the "error" by building a new form from scratch in order to eliminate all the possible variables of having a bug in the form that had been updated so many times before without incident.   Even with the new form having just one text field and one submit form button,  it worked as needed when I used the .PDF file locally right from my PC by  filling out the field and submitting the form's  .FDF data to myself.      It opened the Outlookprogram, created the mail and attached the .FDF file.     I clicked "send" and away it goes  from "me" to "me" and I was able to open the email, click the .FDF then browse to the .PDF source form so the files could extract into the   .PDF.    All normal and all Okay ,  like 100 times before using the WEB, but not now... .
    Today,  even that simple form with one field and one submit button encounters the same  "An error has occurred while sending mail"  message upon clicking on the web based submit button.     The option comes up to let me select the email server and when I click  "OK" , the error notice comes up...    grrrrrrrrrrrrr
    In short, when the form is used in a website environment, it doesn't want to create the outgoing email with the .FDF file attachment.      Normally, it worked like a peach.
    ?? I dunno
    BP

  • An error occured while sending mail: SMTP server error.  The server responded: (null)

    I'm getting this set of error messages intermittantly:
    <P>
    An error occured while sending mail: smtp server error
    the server responded: (null) contact email admin
    for assistance
    other message
    an error occured while sending mail: smtp server error
    the server responded: intermail,
    end with quote.quote contact email admin
    for assistance
    <P>
    This problem may occur at low-use times when Messaging is installed with the
    Trend virus protection software on the same system.
    <P>
    Change the version of the Trend software from 3.0 to the older 2.62 version.

    It's possible that your provider has made a change.
    I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
    Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page.

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Error when starting Mercury Quicke Test Professional

    Hello,
    I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
    Does anybody knows how to resove this?
    Thanks,
    Mahantesh

    Hi,
    This is a common problem if scripting is disabled either on server or on ur sapgui client.
    for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
    Refer my sdn weblogs which shows minimum config for QTP and ECATT  and also how to create and run the scripts.
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    /people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
    Please reward points.

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • Sending job error message to admin by email

    Hi everyone...
    Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
    Is there a better way?
    Cheers,
    Jefi Santoso

    hi,
    >>>Can this be achieved through BPM?
    yes you can put your transformation step
    and send step in a block and specify an exception
    branch and catch all exceptions that will
    occur during transformations and the send step
    then you can send info from the exception branch to
    any other system
    you won't be able to catch the error's name
    but you will be able to notify any thinrd party
    about the error
    more on error catching:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
    Regards,
    michal

  • Error in setting icloud mail on iMac - 'incoming mail server'

    I created a new mail account in icloud and cannot edit this account in Mail Preferences on my iMac.  Everytime I try to save my changes i get the following error:
    "The incoming mail server filed cannot be empty."
    Of course the field is automatically filled in and greyed out so it is not changable.
    I have tried various fixes, deleting, setting up again, setting up the iCloud and Mail/etc. in System Preferences...
    Help!

    Hi Suebadu,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when an email account, such as your Gmail accounts, are not working as you would expect. In this situation I would recommend reading over and working through the attached article. The Connection Doctor may provide some further information as to what is causing the errors. 
    OS X Mail: Troubleshooting sending and receiving email messages
    Best regards,
    Joe

  • Error Mail Merge Aborted due to error in creating the Mail Merge DataSource

    Dear All,
    please help me with this problem (Oracle release 12.0.4.)
    1. PROBLEM:
    When attempting to extract data, using Web ADI in HRMS, Word is selected as the viewer, but an Excel spreadsheet is generated rather than a MS Word document containing the data. Also error "Mail Merge Aborted due to error in creating the Mail Merge Data Source." appears on screen.
    We are using MS Office 2003.
    2. PROBLEM:
    Unable to create data source from HR form PAYWSLEE.
    We are using custom integrator. This integrator is attached to form function. Form function is attached to responsibility. We also created the layout.
    The next step would be to create data source from form PAYWSLEE, but we are not able to perform this...
    In release 11i we used this form (PAYWSLEE) to create datasource (for mailmerge), but in R12 this is not working... Something is missing here and I need your help to determine what. I checked the most documents on Oracle Support and didn't find solution for this problem...
    Please advise.
    Kind Regards,
    Andreja

    Hi all,
    Thanks for visiting our forum and sharing your experience here. It'll be benefited to our communicator.
    Have a good time.
    Regards,
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in message

    I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
    The message that has started coming up is the following:
    An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
    I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.

    I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.

  • Error while sending E-Mail Notification

    hi,
    when i tried to send mail from BPEL i faced error, where i configured the outlook with gmail server its working fine,here i paste the ns-emails.xml and the error code is server.
    ns_emails.xml
    <EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
    EmailMimeCharset=""
    NotificationMode="ALL">
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>my name</FromName>
    <FromAddress>my email address</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>smtp.gmail.com</SMTPHost>
    <SMTPPort>587</SMTPPort>
         <AuthenticationRequired>true</AuthenticationRequired>
    <UseTLS>true</UseTLS>
    </OutgoingServerSettings>
    <IncomingServerSettings>
    <Server>pop.gmail.com</Server>
    <Port>995</Port>
    <Protocol>pop3</Protocol>
    <UserName>my email address</UserName>
    <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">my password</Password>
    <UseSSL>true</UseSSL>
    <Folder>Inbox</Folder>
    <PollingFrequency>1</PollingFrequency>
    <PostReadOperation>
    <MarkAsRead/>
    </PostReadOperation>
    </IncomingServerSettings>
    </EmailAccount>
    </EmailAccounts>
    Error in server:
    javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS
    command first. a4sm326251tib.11
    at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTran
    sport.java:1020)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTranspor
    t.java:716)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTrans
    port.java:388)
    at oracle.tip.pc.services.notification.email.EmailDriver
    .sendMessage(EmailDriver.java:215)
    at oracle.tip.pc.services.notification.email.EmailDriver
    .send(EmailDriver.java:185)
    at oracle.tip.pc.services.notification.DefaultNotificati
    onServiceImpl.sendEmailNotification(DefaultNotificationServiceImpl.java:251)
    at oracle.tip.pc.services.notification.NotificationServi
    ceImpl.sendEmailNotification(NotificationServiceImpl.java:271)
    at oracle.bpel.services.notification.queue.sender.MDBCon
    sumer.deliverNotification(MDBConsumer.java:256)
    at oracle.bpel.services.notification.queue.sender.MDBCon
    sumer.onMessage(MDBConsumer.java:137)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native M
    ethod)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMet
    hodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Deleg
    atingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoin
    PointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContext
    Impl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterce
    ptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContext
    Impl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.SetContext
    ActionInterceptor.invoke(SetContextActionInterceptor.java:44)
    at com.evermind.server.ejb.interceptor.InvocationContext
    Impl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(
    InvocationContextPool.java:55)
    at com.evermind.server.ejb.MessageDrivenConsumer.onMessa
    ge(MessageDrivenConsumer.java:347)
    at com.evermind.server.ejb.MessageDrivenConsumer.process
    Messages(MessageDrivenConsumer.java:233)
    at com.evermind.server.ejb.MessageDrivenConsumer.run(Mes
    sageDrivenConsumer.java:169)
    at com.evermind.util.ReleasableResourcePooledExecutor$My
    Worker.run(ReleasableResourcePooledExecutor.java:298)
    at java.lang.Thread.run(Thread.java:595)
    please help me out to resolve the issue.
    thanks in Advance
    Aswath Thaniga

    hello Anirudh Pucha,
    thanks for your message,
    i'm downloading all the files you advised and one more doubt regarding SOA installation,
    i'm using BPEL Process manager 10.1.3.1.0 installed on my machine and not installed SOA Suite (problem in installing AS Middle tier), i send voice,sms through BPEL PM which works fine, and faced problem in e-mail notification only, according to me with out installing SOA suite we can use BPEL PM or please let me know the procedure to install the downloading files.
    if possible please send me a details in word documents to my mail "[email protected]".
    Thanks again

  • Error occured while sending mail SO_OBJECT_SEND

    Hi all,
    While using ME23n for print preview of a PO I m getting the below error :
    Error occured while sending mail SO_OBJECT_SEND,return code Z8.
    The problem is this FM : SO_OBJECT_SEND is not explicitly used in the Driver program.
    In debugging mode if I set a Break-point at SO_OBJECT_SEND, it shows BREAKPOINT set,
    but doesnt stop at that place.
    If any one of you know the solution or if you can suggest some points regarding this problem,
    it will be of great help...
    Thanks & Regards,
    Ramya

    Hi,
    If it is not stoping means may be the so_document_object is calling based on any condtion.
    Y u can't you go ur driver program and search for the FM.
    Otherwise put the break point at the statement 'CALL FUNCTION'.
    Thanks,

  • Error "4" when trying to test my connection

    Hi, please help me find out how to fix this error:
    when i try to test the connection pops up an error message with only a number "4" in it, nothing else. what's this error message about and how do i fix it??
    Thanx in advance!!!

    Hi,
    unfortunately we cannot help without having connection to that database. It looks like you are trying to connect to Oracle 8 - not supported anymore.
    Philip

  • I have suddenly got the following message An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has se

    Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
    An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
    I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?

    Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
    The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures.

Maybe you are looking for