Error in Check DB after RESTORE and RECOVER

Hi Team,
System was partially restored and recovered due hardware failure.
We had 3 file systems that had to be restored and in one of them we has "/oracle/BWP/sapdata8/temp_2/temp.data2" data file.
After the restore and recovery , the system was up.When ran check DB , the get the below error message and when i checked in DB02 , everytime when trying to see the datafile inside PSAPTEMP , there is a short dump with the same error message listed below.
Database error text........: "ORA-01157: cannot identify/lock data file 256 -
see DBWR trace file#ORA-01110: data file 256:
'/oracle/BWP/sapdata8/temp_2/temp.data2'"
When checked the restore , looks like "oracle/BWP/sapdata8/temp_2/temp.data2'" was not restored.
Kindly help to check how to correct this error. Even my online backup's are failing.

Hello Priyanka,
how did you restore your database?
The temporary files are not included in a backup, because they are not needed for a recovery - that works as designed.
After the recovery you have to add these files again.
If you would have used brrecover for restoring/recovering your database the temporary files would be added automatically.
Check the documentation here:
http://help.sap.com/saphelp_nw70/helpdata/EN/6e/4c37b85dc7f24d88f177396dc45645/content.htm
Now you have to do this manually like this:
shell> sqlplus / as sysdba
SQL> ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/BWP/sapdata8/temp_2/temp.data2' REUSE;
Regards
Stefan

Similar Messages

  • TS3694 Can't restore and recover iPhone 4s. Keep getting The iPhone "iPhone" could not be restored. An unknown error occurred (14). Help please!

    Please help. I simply connected my iPhone 4s to my Dell laptop (Win 8) which connected to iTunes automatically (which it normally does) and was told that I needed to update my software (I believe for both iPhone OS and iTunes). I tried to update and now my iPhone won't work at all. I just keep going in circles trying to restore and recover and I keep getting the error message: The iPhone "iPhone" could not be restored. An unknown error occurred (14). All I see on my iPhone 4s screen is a cable connector, a little up arrow, and an iTunes symbol--and nothing else works.

    http://support.apple.com/kb/TS3694

  • My iphone5 died and i try to restore and recover it and get error 40!! please help ! i am really sad !

    Hi guys,
    Yesterday My iphone died ! and maybe it is funny for you guys but it is like I am loosing my best friend. I read everything i found on internet and tried to restore and recover my phone by computer and in the part that it want to verify my phone with apple it gave me error number 40 !
    1.I dont have any firewall.
    2.my cable is original
    3. my itune is updated.
    So i could not fix it and i went to Genius bar(?!?!) and they look at my phone and they said it died and you should pay 260$ to get new phone !! and i already ordered iphone 6 and why should I pay 260$ for one week ?!
    Please help me that how i could fix error 40 !
    I really appreciate that !

    iOS 7 RESTORE ERROR 40

  • I have been given an Apple 3G which is in jailbreak.  After restoring and updating my phone will not accept any updates or restoration. Unknown error 1015. Please help!

    I have been given an Apple 3G which is in jailbreak.  After restoring and updating my phone to get rid of jailbreak the iphone will not accept any updates or restoration. Unknown error 1015. Please help!  I am new to all this and want to start using the phone legitimately.

    I believe from the situation you describe your iPhone 3g has the iPAD baseband 6.15.00 which is interfering with iTunes. Remember Apple does not allow downgrade of software typically. The current 3g firmware 4.2.1 has a baseband 5.15.04 which is lower than, what I believe your baseband is of 6.15.00. So to install the current 3g firmware 4.2.1 would actually be a baseband downgrade, which iTunes will not allow. So to fix your iPhone you will have to search the Web like diesel vdub said. There are no parts to buy and your iPhone will work again I promise.

  • Restore and recover Logic 8 after main OS boot disk crash

    Hi,
    I want to restore and recover Logic 8 and the software i use with it (Apogee Maestro,UAD Quad & Waves plug-ins) to a new boot disk. I have both a back up of the main OS drive on a drive with Time Machine and a disk copy of the main drive (on another) as i had it before the boot disk crashed. My question is which is the best option to take when restoring the OS etc? As I have heard that there is a couple of bugs and issues when restoring via Time Machine. Is restoring via the disk copy a simple procedure? Or, should i reinstall everything completely from scratch and copy back the receipts and authorizations perhaps? Can you point me towards the best link/method to get my setup back on track?
    Yours sincerely,
    KFK
    ps.. i'm using an apogee symphony pci card

    Thanks for your reply John, but that didn't do the trick for me. I called Apple's professional audio support. Even though I didn't get the answer I wanted to hear, the support was awesome - the guy was very knowledgeable and helpful. Basically, the error I'm experiencing is a nasty one if it appears with pro apps like Logic. He indicated my only recourse was to re-install Logic. Since I'm on Logic 7, I figured if I have to re-install, might as well upgrade to Logic 8. I'm mid-project right now, so I'm pretty nervous doing that, but not much choice.

  • Error -1 when trying to restore and update iphone 4s

    After trying to update to new software 5.1 i got Error -1 when trying to restore and update iphone 4s via itunes

    here part of iphone upadate log may help, i could not post all log it's too long
    update_baseband: requesting baseband firmware data
    update_baseband: received data from host (11207986 bytes)
    update_baseband: performing next update stage
    bbupdater: BEGIN: Perform stage at second
    bbupdater:           BEGIN: Sending 1 Images
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModeMaverick
    bbupdater:                     Hello response boot mode:  ETLSAHModeMaverick
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Starting Maverick Protocol
    bbupdater:                     Sending Erase Response: Length 12 Type 161
    bbupdater:                     Erase EFS 0
    bbupdater:                     Checking Manifest Request: Length 40 Type 162
    bbupdater:                     Sent Manifest with length 586
    bbupdater:                                DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                               OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                               AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                     Sending Hash Response: value 1  success 1
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModePending
    bbupdater:                     Hello response boot mode:  ETLSAHModePending
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Sending Image 'OSBL'...
    bbupdater:           0x6e050 of 0x6e050 (100 percent)
    bbupdater:
    bbupdater:                     Took 0.229405 seconds
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModeComplete
    bbupdater:                     Hello response boot mode:  ETLSAHModeComplete
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Sending Image 'ELF'...
    bbupdater:           0x32000 of 0x12c0000 (1 percent)
    bbupdater:           0x6013f of 0x12c0000 (2 percent)
    bbupdater:           0x885000 of 0x12c0000 (45 percent)
    bbupdater:           0x1085000 of 0x12c0000 (88 percent)
    bbupdater:           0x119b000 of 0x12c0000 (93 percent)
    bbupdater:           0x12b1000 of 0x12c0000 (99 percent)
    bbupdater:           0x12c0000 of 0x12c0000 (100 percent)
    bbupdater:
    bbupdater:                     Took 6.138110 seconds
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:           END: Sending 1 Images
    bbupdater:           Waiting 4 seconds...bbupdater:           OK
    bbupdater:           BEGIN: Preparing Initial stage
    bbupdater:                     Requested boot mode:  kBBUBootModeNone
    bbupdater:                     Creating transport, attempts remaining 0...bbupdater:                     OK
    bbupdater:                     Modem booted
    bbupdater:                     Ping failed, 9 tries left
    bbupdater:                     Ping failed, 8 tries left
    bbupdater:                     Ping failed, 7 tries left
    bbupdater:                     Ping failed, 6 tries left
    bbupdater:                     Ping failed, 5 tries left
    bbupdater:                     Ping failed, 4 tries left
    bbupdater:                     Ping failed, 3 tries left
    bbupdater:                     Ping failed, 2 tries left
    bbupdater:                     Ping failed, 1 tries left
    bbupdater:                     Ping failed, 0 tries left
    bbupdater:           END(kBBUReturnIOError): Preparing Initial stage
    bbupdater: END(kBBUReturnIOError): Perform stage at second
    send_bbupdate_status: sending baseband update status to host
    update_baseband: bbupdater error: kBBUReturnIOError
    0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
    1: BBUpdater/10
    unable to convert ramrod error 1004
    attempting to dump restore log
    writing log file: /mnt1/restore.log

  • Database is pending after restore and recovery

    Database is in the pending status after restore and recovery.
    The database can not startup today and it shows a error message: the log file 2 cannot be archived. Then I issue the following command:
    SQL> select group#, sequence#, bytes, members, status from v$log;
        GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
             1        452   52428800          1 CURRENT
             3        451   52428800          1 INACTIVE
             2        450   52428800          1 INACTIVE
    SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
    Database altered.
    SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
    Database altered.
    SQL> alter database open;
    Database altered.
    SQL> shutdown immediate;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORACLE instance started.
    Total System Global Area  566231040 bytes
    Fixed Size                  1220580 bytes
    Variable Size             125829148 bytes
    Database Buffers          432013312 bytes
    Redo Buffers                7168000 bytes
    Database mounted.
    Database opened.But when I try to login using EM console, it shows the database is not open. Then I restore and recover the database using EM Console. But the database then get into the pending status.
    What to do next?

    Stop the EM console and then restart it. I expect all is OK then.

  • How do i get my pictures back on my iphone after restoring and backing up my iphone

    hod do i get my pictures back on my iphone after restoring and backing up my iphone?

    Have you ever tried iPubsoft iPhone Backup Extractor? It had good performance when i used it to recover pictures from iPhone!

  • I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

  • Restore and recover tablespace(s) in another db using RMAN

    Hi,
    I'm using Oracle Standard edition 11gR2, actually that's why I'm posting this thread because I can't use TRANSPORT TABLESPACE feature.
    I need to restore and recover two tablespaces, backed up in source database in another database. The destination db has been duplicated from the source db a couple of days ago so the structure is identical.
    I cannot use Data Pump on this specific tablespace, because it causes some strange behavior in our application. So I took a backup from tablespaces and now I'm looking for a solution to restore and recover it in another db.
    Is there any command to restore a tablespace from a specific file? I googled a lot and no luck so far..
    Any ideas?
    P.S: I use controlfile instead of recovery catalog.
    Edited by: aLuViAn on Dec 2, 2012 11:55 PM

    I have a backup schedule to take daily full backups (twice) and hourly incremental backup. So yes, I have backup!
    P.S: I also tried the following:
    restore tablespace REG_DATA from  'temp_ERIS0_hjnru4ss_1_1.rman';
    Starting restore at 03-DEC-12
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 12/03/2012 12:10:36
    RMAN-06509: only SPFILE or control file can be restored from AUTOBACKUPIt's not an autobackup, why oracle thinks so?!
    Edited by: aLuViAn on Dec 3, 2012 12:45 AM
    Edited by: aLuViAn on Dec 3, 2012 12:47 AM
    Edited by: aLuViAn on Dec 3, 2012 12:48 AM

  • After restoring and Syncing all APPS status "loading"

    After restoring and Syncing my new Iphone with my older Iphone backup, all my apps are in "loading" status, what should I do?

    You can try this
    With the iPhone plugged into iTunes
    Click on the iPhone under device thengo to info
    Scroll down to the bottom of the page under advance and check contact, it will say something like
    Put the information on this computer, then do apply
    Hope it helps
    Mike

  • I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

    I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

    please replyyy i'm stuck on this like whole week

  • Restore and recover Oracle 10g database from tape.

    I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
    Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
    I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.

    853153 wrote:
    I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
    Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
    I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.For sure it is double work, To copy backup files on UNIX host.
    Are you using catalog or nocatalog?
    If the backup information is out of retention, Catalog them again also in netbackup.
    So that you can able to restore database directly without copying those files to host.

  • Iphone 3gs will not activate after restore and update

    my sons iphone 3gs will not activate after restore and ios update.
    phone keeps saying no service but worked fine before restore and update any ideas ? thanks

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

  • Restoring and recovering and encrypted backup.

    Hi,
    I'm in the early stages of implementing encryption of RMAN backups using the Oracle Wallet to store the key.
    I don't yet have a box to test the restore on but thought I see if anyone has any experience they can share of restoring and recovering encrypted backups?
    Some questions I have include at what point does the wallet have to be opened during the restore? Is the wallet opened at the NOMOUNT step by the instance?
    Thanks in advance,

    Hi,
    Before dropping a DB we had taken an RMAN backup.I hope you were in mount mode.
    Will RMAN automatically recognize the FORMAT of the backup piece and restore ?No it won't.
    First you have to restore a controlfile in nomount mode with:
    restore controlfile from '/u04/backup/rmanbkp /02mo9fnc_1_1';
    and do alter database mount.
    Than you have to run "catalog start with '/u04/backup/rmanbkp'; " so the instance now knows where to find the pieces.
    Now you can run a restore database command.
    Than open the database with resetlogs.
    Regards,
    Tycho

Maybe you are looking for

  • Need help with .asp Virtual Includes

    Hi, I am using; Dreamweaver 8 Win XP Pro IIS6 Virtual Directory Information in IIS: Local Path: C:\Inetpub\wwwroot\hseih Application Name: hseih Execute Permissions: Scripts Only Configurations>Options>Enable Parent Paths: Checked Read, Write, Browsi

  • Adode Photoshop Album Starter Edition Lock Out

    HI I have been using a very old product for years called Adobe Photoshop Album Starter Edition 3.2, however it has locked me out of my old photos of my children. Does anyone know how to get in to access old photos as it is saying it is past registrat

  • Sun Certified java Web Services Developer Certification

    Hello, Please suggest me book and online exam simulator so that i can prepare for Sun Certified java web Services Developer Certification (not Sun certified web component developer) for J2EE5 (not j2ee 1.4). Please hekp me in this regards, Meeraj

  • How to import pix into iPhoto from iphone 3gs on 3.1.2

    so my photos sync in itunes...from my mac to my iphone...but my pix taken or saved on my iphone do not..so i went to iphoto and see my iphone is showing as a drive in iphoto..when i click on it there are 253 dotted line only thumbnails...meaning ther

  • Lower 3rd (in Animation Codec mills +) is darker after exporting to QT?

    Hello My After Effects lower 3rd (Animation Codec mills +) is darker over video after exporting to QT movie? It only looks darker in the areas where the lower 3rds are layered over the video on the final exported QT. But, this doesn't show up in FCP;