Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Similar Messages

  • Error in code page mapping for Source System

    Hi All,
    We are Loading data into BI system from MDM System.
    It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
    Message Class: RSDS_ACCESS 13.
    We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
    Any pointers for this error will be Helpful.
    Regards,
    Mayank

    Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
    any advice.. ?
    Edited by: Edi Erwan  Abu Talib on Jun 22, 2009 8:22 AM

  • Error in source system while extracting the data from R/3!

    Hi,
    i had created FM and extract strcucture in R/3 .
    using the above two, i had created data source using RSO2 T code.
    when i checked the extractor ( RSA3 T code) in R/3  it was working fine .
    (status messege displayed as 1000 records selected).
    then i assigned  this data source to infocurce and creted info cube using the same info source.
    but when i schedule the info package it is syaing in the monitor screen "error in source system".
    what could be the problem?
    Thanks,
    Ravi

    Hi
    trhese are the possiblies
    1.first check the source system connection and find if there is any error in it.
    2.Go to sm37 and find whether the  request is completed or not if its terminated find out the time. how long does it takes to complete the process.
    3.once again relicate the data source and find whether is it again extract data.

  • Error while loading the data from text file

    Hi,
    I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
    Can any one please suggest me the solution.

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

  • Error 8 while loading the data from the souce system

    Hi Gurus
    Every day we are loading some data from one of our souce systems through process chain
    But today all the loads failed complaining about error 8 while extacting the data
    connection to source system is fine
    we have the problem while loading master data from the same source system
    any solution?
    Thanks in advance

    Hi,
    Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
    hope it helps...
    regards,
    Raju

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while loading the data from ODS to InfoCube

    hai
    Im trying to load the data from ODS to InfoCube for particular year .
    But it says that there is a source system problem .
    why it is like that .
    pls tell me
    i ll assing the points
    rizwan

    Hi Rizwan,
    you didn't mention the error message in details. there could be a few places to be checked:
    - check if BW itself source system is active and in tact and reactivate if necessary
    - check if update rule is active and reactivate if necessary
    - check if ODS is active and reactivate if necessary
    Regards,
    Lilly

  • Error while loading the data from excel to database.

    Hi,
    I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
    What exactly the error is when i click the filename to view the result preview it shows an error as:
    The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
    Kindly help with solution.
    Thanks/Regards
    Sakthivarman J.

    Hello;
    That error message comes from Microsoft, so something in you Excel sheet is the cause.
    Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
    Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
    Or convert it to a CSV and create an external table.
    Best Regards
    mseberg
    Might also throw an 3163 as an error where you cannot see it.
    Edited by: mseberg on Sep 9, 2011 7:34 AM

  • Error occured in the Source system while loading mater data

    hi all
    While loadng the master data info package.The request is getting failed with error occured in the source system.
    error message says "<b>if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request</b>".
       I had tried repeating the Request but again It is getting failed.
       please help me resolving the issue.
      Thanks(=Points)
          Priya

    Hello Priya
    If u r loading thru flat file
    1. Check the correct path in infopackage
    2. Check if it is opened,if it is then close it and run package again
    If loading thru R/3
    1. Check DS is not opened in change mode
    2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
    3. Are you running init..then make sure no document is posted in R/3 side...
    Thanks
    Tripple k

  • Error while load the data from CSV with CTL file..?

    Hi TOM,
    When i try to load data from CSV file to this table,
    CTL File content:
    load data
    into table XXXX append
         Y_aca position char (3),
         x_date position date 'yyyy/mm/dd'
    NULLIF (x_date = ' '),
    X_aca position (* + 3) char (6)
    "case when :Y_aca = 'ABCDDD' and :XM_dt is null then
    decode(:X_aca,'AB','BA','CD',
    'DC','EF','FE','GH','HG',:X_aca)
    else :X_aca
    end as X_aca",
    Z_cdd position char (2),
         XM_dt position date 'yyyy/mm/dd'
    NULLIF XM_dt = ' ',
    When I try the above CTL file; geting the following error..
    SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
    SQL*Loader-951: Error calling once/load initialization
    ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
    ORA-00917: missing comma

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

  • Error in codepage mapping for source system. Error text:

    guyz,
    im facing the below issue in prod.
    Error in codepage mapping for source system. Error text:
    Message no. RSDS_ACCESS013
    Collection in source system ended
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Inbound Processing
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    need your guidance,
    cheerz,
    raps.
    Edited by: raps on Mar 1, 2012 9:39 AM

    Hi ,
    Kindly go throught the following threads for your issue resolution::
    Error in code page mapping for Source System
    Erroe in source system
    Regards,
    Arpit

  • Records was deleted at R/3 sys - getting error while loading the data

    Hi All,
    we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
    we have replicate the DataSource and activate Trans rules but no use still getting the same error.
    when we execute the data source  2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
    and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
    And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
    Could you kindly suggest me any one how to rectify this error.
    Thanks in Advance,
    Shaliny. M

    hai Lilly
    I activated myself source system  and replicate the my datasource .
    Then activate the update rules for ODS , InfoCube and InfoCube .
    Then i tried to load the data into InfoCube from ODs .
    Again im getting same problem .
    why it is like that
    pls tell me
    rizwan

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Error in codepage mapping for source system

    Hi Experts,
    I am getting the following error while loading data from ECC only for Account COPA datasource.
    Error in codepage mapping for source system. Error text:
    Message no. RSDS_ACCESS013
    Regards,
    Sandeep Sharma

    Hi Sandeep,
    This is a issue related to idocsRFC connections from teh sourcesystem....
    U can contact ur BASIS team to solve this...
    From their end they have to chk the unprocessed/errored idocs in BD87...
    They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
    This is a solution for temporarilrly basis...
    If this occurs regularly they have to change the settings in SM59 which is so important...
    Refer exact note for this: 784381
    The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
    Regards,
    Marasa.

  • Error in codepage mapping for source system. Error

    Hi BW Experts,
    I am facing following error:
    Error message: Error in codepage mapping for source system. Error text:
    Details: Inbound Processing ( 1000  Records ) : Errors occurred
                Error in codepage mapping for source system. Error text:
                Update PSA ( 0 Records posted ) : Missing messages
    I repeated the delta working and everything fine.
    Does anybody know why this error occurs?

    Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double  click on it and find special options there select  the optioned i mentioned already.
    Please search SDN you can fin threads related to this thread
    if not let me know.
    Regards.

Maybe you are looking for

  • Photo Downloader CS5 - Generic Flower Icon

    Just upgraded to CS5 about two weeks ago.  I am using Photo Downloader to download my photos from a CF reader.  All images on the CF are JPEGS (no Raw).  Noticed today while the download was running, after a few hundred images had downloaded, the thu

  • Problem with the HORIZONTAL Scrollbar

    Someone (I thanks him) has explain me how to have a horizontal scrollbar in a JTable (I use setHorizontalScrollBarPolicy(...)). So, now I have my Horizontal scrollbar but ONLY de bar and NOT the "button" in the bar. So, I am not able to scroll (and f

  • I work for a funeral home that has used Photoshop CS2 for years.

    I work for a funeral home that has used Photoshop CS2 for years.  Within this program, we were able to upload a background "file" with themes - i.e., spring flowers, fall leaves, etc.  We would scan in pictures given to us by the deceased's family an

  • Connecting to internet at home

    My iPod Touch sees my home wifi network, but no IP address, Subnet Mask or Router info appears. When I try to connect I get Error 7. I have reset my network settings on the iPod, but this did not solve the problem. I contacted my internet service pro

  • OSB Error codes

    What OSB error codes,I have to handle in the error handler stage when a route node finds that the given end point is not available and also when the end system is timing out. Is it BEA-38000? Thanks.