Error in codepage mapping for source system. Error

Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?

Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards.

Similar Messages

Error in codepage mapping for source system

Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep Sharma

Hi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa.

Error in codepage mapping for source system. Error text:

guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AM

Hi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

ERROR - no available datasource for source system exist

I tried to load the master for 0Bill_Type
1) Install infoobject business content and Create infoobject
2) Activate datasource in R/3
3) Replicate datasource
4) Assign infosource ---> the error said no available datasource for source system exist
When I go to source system--> Object overview --> I don't see anything at all?
Please advise what went wrong ?

Hi Pandadda,
I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
1. In your R/3 system execute TCODE = SBIW.
2. Go to BUSINESS CONTENT DATASOURCES
3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
Replicate you datasource then check it on your BW system
R,
Adwin

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error : Unicode setting doesnot match source system in BW

Hi All,
While replication data in BW im facing the following error :
unicode setting doesnot match source system.
Kindly suggest.
Regards,
Amit Miglani.

Hi,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
Amit Miglani.

Use BDLS in BI for re-mapping of source system

Hello,
Is it possible to use tr code BDLS in BI in order to automatically change source system assignment in source system related BI objects (such as info sources, info packages..)?
We have created a new ECC QA client and would like to load data from that to BI (the same BI system as before) and wish to avoid the manual work of manually re-mapping all source system related objects.
In the thread below the conclusion was that it's possible to use BDLS, but when executing it in test mode and looking at the affected tables, only the parter profiles and EDI-related tables seems to be modified with a new LSN (logical system name). However, I could not find a change in tables containing f.ex. info sources etc.
Fresh source system clients in production BW system
Is there anyway of doing this without manually re-mapping the BI objects?
Thanks,
F C
Message was edited by:
F C

Thanks!
When running a LSN conversion in BI from source OLTP to target OLTP in test mode and then checking some BI-object tables, I see that the logical system name is changed, so it's seems to me as if the infosources are changed.. (or?)
However, perhaps a transport in "system copy" mode is preferrable (?) In step 2, do you mean that I should first collect a system copy in a transport request and then collect "everything before" in the same transport request?
Any comments on BDLS, Patrick?
Regards,
F C
Message was edited by:
F C

Deletion of request from init option for source system

Hello Experts,
Iam using 3 IP.
IP for init load with data transder, IP for init load without data transfer & Delta.
now with data transfer IP is not used.
i trigered "without data transfer IP", then accidentally "triggered with data transfer IP".
then manually made the request red & deleted data by right clicking datasource-->manage & deleted all the requests(2) available.
now before i load init without data transfer request exists in "init option for source system".
when trying to delete IP
"There are active init selections in source system for this data source. Therefore, only ALL init selections can be deleted at once. Do you want to delete all init selections (all channels)?"
when i choose yes....it takes a long time & gives run_time error status.
Guys, this issue is solved.
I deleted the without data transder first.
now when I load delta, I got error.
"Job terminated in source system --> Request set to red"
regards
KV
Edited by: K V on Apr 10, 2009 2:16 PM

Hi KV.........
U r doing init without data transfer..............it means it will not pick any records...........it will just set the init pointer and along with that Delta queue will get generated.........after that whenever any changes will be done.........or any new records will come.......it will get reflected in the Delta queue.......
So next time when u run the delta load..........data will be fetched from the Delta queue...........
So check the delta queue.......it may happen that there r no new or changed records..................
So check............may be delta queue is 0..............
Also check the update mode for the datasource in LBWE(if Logistic datasource)............if the update mode is Queued delta or unserialized V3 update........then data will first get accumulated in the Extract queue(LBWQ) or update table respectively.............so to fetch records in the Delta queue u hav to schedule the V3 jobs in LBWE............otherwise Delta queue will be empty and fetched records will be 0........
Regards,
Debjani......

Error in codepage mapping for source system. Error

Similar Messages

Maybe you are looking for