Error in commitment fund date from a payment request

Hello,
When we try to post a payment request from a funds commitment position that has been added to the fund commitment in a date later than the posting date of the payment request, we receive an error message FI_E050.
In our example the message FI_E050 is "Posting date/period 20.04.2009/004 is earlier than existing date/period 07.07.2009/007".
The posting date of the payment request is 20.04.2009, the posting date of the funds commitment is 02.01.2009 and the creation date of the position of the funds commitment is 07.07.2009.
We found the same issue for a modification of a commitment position and we solve it in SPRO as told by SAP OSS but now we have found the same error in an added position.
Anyone has found this issue?
Thank you very much in advance.
Kind regards

Hello Mar,
I will try to explain it better. Sorry for the inconvenience.
The FM update profile is 000359.
PB: Annual-Based Encumbrance Trkg is marked.
CB: Period-Based Encumbrance Tracking is marked.
Then, we have the value type 65 with this values:
Payment Budget     X
Commitment Budget     X
Year-Dependent Control Between Pa     
Payment budget reduced     X
Commitment budget reduced     X
Payment Budget Date, Fiscal Year     B
CB Date, Fiscal Year     B
PB Date, Approval Year     F
CB Date, Approval Year     F
CCN logic payment budget     
CCN logic, commitment budget     
PB: Period-Based Encumbrance Trac     X
CB: Period-Based Encumbrance Trac     X
Budget assigned     X
Revenue/expenditure control     
PB: Annual-Based Encumbrance Trkg     
CB: Annual-Based Encumbrance Trac     
Approved Amounts in Payment Budge     
Approved Amounts in Commitment Bu     X
Rest of the values has not been updated with a profile value type dependency.
After your answer, I have made a test between a funds reservation and a funds precommitment to ensure that the error was made because of the activation of PBET. Then I get that if I add a position to the funds reservation and I use this position in a funds precommitment, I get FI_E050 too. I use the same dates that you can find in the first post.
On the other hand CB Period-Based Encumbrance Tracking is active for value type 80, 81, 82 and 83 (and 65). I suppose this is active because of the profile.
Please, if you need more info I can send you and image of the RFFMMONI.
Thank you very much in advance.
Kind regards

Similar Messages

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Error while retrieving bulk data from mdm in staging server

    I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
    Could anyone please suggest me about the possible cause of this error. Please reply soon.
    Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
    Edited by: Thomas Zloch on Nov 22, 2010 5:16 PM

    Can you elaborate the thing... I don't think  /*+ APPEND */ this is working for me ,still I am getting same error.
    If you have any other suggestion,I would like to hear.
    Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

  • No data Exists error while retrieving the data from a table

    Hi Everyone!
    I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

    Hi !
    thanks for ur response...
    I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

    I have set-up an ECT in SPD2013 on SP2013.  It is a SQL Data source called ProjectWebApp.   I have BCS/SSS set-up.  I can create an ECT OK in SPD.  I can add the ECT to a custom list.
    The problem is when I add a new item in the list the following error message appears in red
    An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
    I cannot filter or return any results.  There is data in the DB.
    Another test I do is to try and create a new App/List using the "External List" template.  When
    I select the ECT a red message appears "External Content Types are not available".  which is odd since I can add an ECT to a list as mentioned above.
    Any ideas?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    Please try the option Allow unlimited length in document libraries in the column settings:
    http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
    If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
    http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
    Please provide error message in ULS log for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Error, while pushing the data from Oracle to MSSQL.

    Hi,
    I am facing the below error, while pushing the data from Oracle to MSSQL.
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
    Please suggest me, how to overcome from this.
    Thanks.

    [email protected] wrote:
    Hi,
    I am facing the below error, while pushing the data from Oracle to MSSQL.
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
    Please suggest me, how to overcome from this.
    Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
    What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
    As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • "...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

    I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
    Today I accepted the latest upgrade to my iPhone software.
    Since it installed, it will not sync.
    It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone."  After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
    Has anyone else run into this Undocumented Feature of the latest upgrade?
    As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
    Thanks to anyone who can help!
    Steve Callender

    Tried rebooting the phone, and now it works.
    Guess there's 2 lessons here -
    Boot again when installing new SW, even if the phone reboots itself during installation, and
    Boot to see if that fixes a problem before posting it.
    Steve

  • Error :Unable to retrieve data from iHTML servlet for Request2 request

    I open bqyfile to use HTML in workspace.
    When I export report to excel in IR report.
    Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
    And I can not open any bqyfiles in workspace.
    Anybody gat the same question? Thanks~

    Hi,
    This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
    http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
    Hope this helps..

  • Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

    Hello ,
    The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's  at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
    We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
    Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
    Thanks in advance.
    Best Regards
    Sateesh

    Dear Sateesh
    Check this link where the same topic was discussed
    [ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
    thanks
    G. Lakshmipathi

  • Report error "Failed to retrieve data from the database."

    Post Author: tknorst
    CA Forum: .NET
    I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
    Failed to retrieve data from the database.Details: [Database Vendor Code: 229]Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
    The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
    I found very little info on this error on the web (google) - so I hope someone here has an idea.

    You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
    Also do not change the schema of he report.

  • Error:Failed to retrieve data from database [Vendor Code:3001]

    Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
    SELECT "CLIENT"."CLIENT_NAME",
            "RECOVERY"."AMOUNT",
            "RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
            "RECOVERY"."ALLOCATION_CHECK_AMOUNT",
            "RECOVERY"."RECOVERY_DATE"
       FROM "HRI1_OWNER"."CLIENT""CLIENT",
            "HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
            "HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
            "HRI1_OWNER"."RECOVERY""RECOVERY"
      WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
        AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
        AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
        AND "CLIENT"."CLIENT_CODE" <> 'CLIENT  1'
        AND "CLIENT"."MAJOR_CLIENT_ID" in
            (Select major_client_id
               from major_client
              where major_client_code in ('LA', 'PFG'))
      ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM

    @oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
    @centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
    Thanks
    Edited by: user11961230 on Nov 12, 2009 7:12 AM

  • How to get data from OTF spool request number

    Hi all,
            How to get OTF Data from the spool request number (OTF)?
            How to create spool request from the OTF Data?
    Regards,
    Sunil Kumar

    Hi,
    Check this links:
    http://www.sapdev.co.uk/reporting/rep_spooltopdf.htm
    Sending Mail from SAP
    https://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment?showChildren=false#children

  • Capture data from a http request

    i am really new learning abap and i just playing around so i looking a way for capture data from a http request giving the request value and submit for respont something like :
    put the url "http://www.imdb.com/find?s=all&q=" in some way and way for the data to request by the user
    val = 'user_entry'
    result =(any_Function)http://www.imdb.com/find?s=all&q=val
    write / result.
    pd: sorry for my bad english

    Welcome to SDN.
    If you are saying that you want to read some request from the HTTP page,then you have to do it with BSP instead of ABAP.
    Check this link for BSP.
    /message/1688265#1688265 [original link is broken]
    Regards,
    Amit
    Reward all helpful replies.

Maybe you are looking for

  • Will the new mac mini work with the older Flat panel iMac globe speakers?

    I am thinking it might be time to upgrade my 800mhz FP 17", and since i have an extra 22" monitor laying around being unused, i thought the Mac mini would be a drop in replacement...but then i thought about the imac FP speakers and i would like to ke

  • Want to download cross platform, apple too smart

    this isn't a quicktime question, per se, because i haven't been able to download quicktime. my home computer is on a dial-up connection, so i download stuff at work on the T-1 to bring home. my work computer is a PC. unfortunately, the apple site is

  • Linkage Error Looking up EJB from BPEL (11g)

    I am using 11g TP3. I have a BPEL process that is using WSIF to call a plain java class. Then from this class I am attempting to lookup an EJB in another application (but on the same server). My code looks like this... env.put( Context.INITIAL_CONTEX

  • Cropping Non Square Area

    I have the following psd file which my designer provided for me: It's made up of all layers and smart objects and all stuff I have no clue about it. I need to make it so only the bubble is isolated, and everything else is eliminated (i.e. the charact

  • Hot zone Navigation is not working on Adobe Content Viewer?

    I create a Content Viewer v22 using Viewer Builder and I enabled the Hot zone navigation option with a 10% width. But it don't work. I tap on the margins of the article and nothing happens (only show or hide the toolbars). What I'm doing wrong?