Error in Configuration and End to end monitoring
Hi all,
I am getting error in RWB under configuration and end to end monitoring.
End to end monitoring iam getting
"Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
and under
Configuration
"Cannot read the configuration for the selected domain because the system was unable to connect to the monitoring server (possibly due to incorrect logon data). Error message: Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
Please help me.
Regards
Pradeep P N
Hi,
Have you gone throgh these threads.
Neither the messager server nor the application server can be reached
Error when I click "End-to-End monitoring" in XI runtime workbench
Neither the messager server nor the application server can be reached
Regards
Goli Sridhar
Similar Messages
-
Error: SQR configuration and the BRB datasource definition..
<p>Hello,</p><p> </p><p>I've had Hyperion installed on my computer for about 6 months. Ihave two existing connections to seperate servers with DB2databases. I use existing ODBC drivers for the connection. I wastrying to install a third connection to a server/database and madesome changes to perhaps the driver. When I try to run a report nowI seem to connect and get an error : Failed to produce HTML outputfile. Most likely causes include: SQR configuration and the BRBdatasource definition used for this report. I get this error forall the connections now. I've tried unistalling and reinstallingthe software. I've checked the SQRDIR and BRIO_HOME and they seemedgood. I have the server installed on my computer.</p><p> </p><p>Are there any suggestions as to what I might have done tocreate this error?</p><p> </p><p>Thank you,</p><p> </p><p>Sheila</p>
What is the content of the file %PS_HOME%/sqr/opsys.sqc ? What version of Windows ?
How many processes are running simultaneously ?
Did you try to run it manually ?
Nicolas. -
Tiny doc error? Configuring+and+Using+Coherence+Extend
This page:
http://coherence.oracle.com/display/COH35UG/Configuring+and+Using+Coherence+Extend
mentions the string "dist-extend-direct" only once. Is that intended just as an example of something that would match against
<cache-name>dist-*</cache-name>
or was that an error? It seems like it should be mentioned explicitly in the XML config file examples on that page.
-AndrewHi Andrew,
It is the former. It is intended as an example of a cache name that would match the "<cache-name>dist-*</cache-name>" cache mapping in the cluster cache config.
Patrick -
Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
AnuCheck your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows -
ERWB end to end monitor configuration error
Error msg:
Configuration saved RFC ping failed for the following RFC destinations (created upon saving) in the system PI0001: PMIMZ020020090413
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
Incorrect RFC Destinations
Component Type Name of Component RFC Destination Message for RFC Call
ALE-LogicalSystem MZ0CLNT200 PMIMZ020020090413 Error when opening an RFC connection
When I check the RFC destination, I found XI createPMI destination with Load balancing Status "YES" every time, and failed the connect test.Hi,
Please check the RFC's PMIMZ020020090413 in SM59.
There you will find the test conncetion tab. Please check if you are able to login to target system or not.
If not please set the logon parameters and host name.
Also if the name and password are correct, check the following points
1. The user is not locked on system that is the target of the RFC.
2. Assigned the Authorisation object S_RFCACL for the user. It is to allow the user to access the trusted/trusting system.
3. If you are on PI7.1 please check if the sm59 destination has fully qualified hostname.
I hope it should solve your problem.
Best Regards
Jitender Chauhan. -
RFC Connection Error (for end-to-end Monitoring)
Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AMThanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM -
Error in End-to-End Monitoring
Dear All,
when i click display on End-to-End Monitoring, and then not accepting any user etc and the following error message come up
Logon failed error
Call of URL http://sapxi:50010/sap/bc/bsp/sap/spi_monitor/monitor.do terminated due to error in logon data.
Note
Logon performed in system XID .
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
error code: ICF-LE-http-c:100-l:3-T:21-C:3-U:5-P:-L:7
HTTP 401 - Unauthorized
Please help.
Regards,
Venkat.Dear All,
As per your suggestion,I have used PIRWBUSER,
In Runtime Workbench -> configuration (with user PIRWBUSER) i see "A monitoring configuration for the selected XI domain does not yet exist" and a table with 2 component are checked.
When i try "Save Configuration", it writes " RFCDEST_NOT_CREATED".
and I try to use Runtime Workbench -> end-to-end monitoring.But i get "No process defined for this domain ", when "Display".
Please suggest me,how to procced.
Sridhar:user is aleady having the SAP_XI_MONITORING role.
Regards,
Venkat. -
End-to-end monitoring error!!!!!!
hi.
i have a problem.
i trying to start a new selection in end-to-end monitoring, but i have an error with JNET: java.lang.NullPointerException. can anybody help me to resolve it please??
another question is: What is JNET?
is the fist time i configure CCMS and have thousands problems
be patiends with me!
thanks very much!!!java.lang.NullPointerException in End-to-End monitoring
java.lang.NullPointerException in End-to-End monitoring
Ref. the above threads. -
** End-to-End Monitoring - RFC destination error while save config in RWB
Hi Friends,
We have 2 RFC destinations in our XI server. 1) PMI<client>001 2) PMI<client><client>800. First one is for XI server. Next one is for Sender/Receiver System.
We want to activate End-to-End Monitoring in RWB. For this, when I save configuration, it throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
I have checked the user in the above destinations. For the first destination, we have assigned PIRWBUSER of XI system. Test Connection is OK, but unable to login remote. At the same time, PIRWBUSER is not locked.
For the second destination, I have assigned some login user of sender/receiver system. Test connection is OK. Able to login remotely.
There is no RFC user in our XI system. (I tried using RFCUSER* thru SU01 tcode).
There is no PIRWBUSER in the Sender/Receiver System.
In RWB, Configuration, 3 components are there. 1) XIIntegrationServer 2) Business System (for Sender/Receiver System) 3) XI Adapter Framework. I selected last two. (First one is already selected). Monitoring Level : Medium (for all 3). Send and Receive Check box is selcted for the last two.
So, what could be the problem for the above error?
Could you kindly clarifiy friends.
Thanking you
Kind Regards,
Jeg P.Hi friends,
I have one RFC Destination PMI<sysid>001. (Abap Connction) in my XI system. This destination is for XI server. Connection Test is OK. Remote Logon by using the PIRWBUSER is also ok.
In the 'Configuration' tab of the Runtime Workbench, when we select 'Save Configuration', (Business System and Adapter Framework is not activated) with the default activation for XI Integration Server, the system throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
When we save configuration, an one more destination is automatically created in the name as below.
PMI<sysid>001<yyyymmdd>. For Example, PMIPID00120080207.
When we test newly created RFC destination, connection is OK, but not able to remot login using the same user PIRWBUSER.
The difference between old and new RFC destination, in old, we have selected Load Balancing is 'Yes', but in the new it is 'No'. The system also tells the error below.
Name or Password is incorrect (repeat logon) - PMIPID00120080207
But, still remote login is possible in the old RFC destination using the PIRWBUSER.
So, What could be the problem ...?
Kindly reply, friends. -
RWB-Message Monitoring and End-to-End Monitoring
hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
<i>** Reward Points if found useful **</i> -
Confusion configuring End-to-End Monitoring
Hi,
I'm having some confusion configuring end-to-end-monitoring for the Adapter Framework on the Integration Server. If I activate the monitoring and save, I get the message that the HTTP Destination pmistore cannot be found and the prompt to make a new one. The destination pmistore is there, however, and correct, as far as I can tell.
If I make a new one using XIRWBUSER, I get the HTTP error 403, if I do it with a user with SAP_ALL, it works. Is this user just used to create the destination, but the communication still goes with XIRWBUSER, as it should be?
What am I doing wrong?
Greetings,
Francis WolfHi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup -
Difference between Message monitoring and end tot end monitoring.
Hi,
What exactly is the difference between message monitoring and end to end monitoring?
I read that message monitoring is used by end to end monitoring. Then why do we have two separate monitoring options?
Thanks
Hari.End-to-End Monitoring
You use end-to-end monitoring in the following cases:
● If you want to monitor message processing steps in a number of SAP components (to be configured).
● If you want to monitor the path of individual messages through these SAP components, from start to end.
Message Monitoring
You use message monitoring in the following cases:
● To track the status of messages
● To find errors that have occurred and establish what caused them
for detail see this
Message Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/frameset.htm
End-to-End Monitoring
http://help.sap.com/saphelp_nw04/helpdata/EN/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm -
What is the difference between Message Monitoring and End-to-End monitoring
Hi experts,what is the difference between Message Monitoring and End-to-End monitoring? and What is the difference between Value Mapping and Fix value?
Thanks,
ManojHII
You use message monitoring in the following cases:
● To track the status of messages
● To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
● If you want to monitor message processing steps in a number of SAP components (to be configured).
● If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also refer this doc...gives more insight on various monitoring:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
... End-to-end monitoring in SAP XI provides a graphical overview of the different XI
components and the message flow between them. It is based on the Process Monitoring Infrastructure (PMI).
ans also
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated. -
Getting Error while accessing End to end Monitoring.
Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue.Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue. -
Configuring end-to-end monitoring
1) configuring end-to-end monitoring - we have to put monitoring level high for which components
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
3) in activating ccms monitoring for xi -ccms config
in sxmb_adm parameter - ccms_monitoring to 1 ? why
give me all the details of that , i hope i will get appropriate from u guru'sHi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup
Maybe you are looking for
-
VBA API: How to get the monitor number?
Hello, I have written an Excel application which controls an external application (making inputs, reads out the window, etc.). I use a lot of API functions, e.g. as in the code from thisarticle: https://support.microsoft.com/en-us/kb/194578?wa=wsigni
-
How do you attach muliple pics in email
I am trying to send a large number of pics in an email. I am only being able to send them one by one from iphoto. Is there a way highlight all the pics at once for a one time attachement. Instead of doing it individually
-
EDs.dll error when use Updateusers or provisionusers commands
I am installing V9.2.1 and receive this error when I try to use updateusers or provisionusers. I have installed and configured shared services, aas, eas, planning and using weblogic 8.1.4. Any ideas? It says it cannot find library eds.dll. Is this be
-
While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call. Help???
-
T400s with Windows 7 RTM doesn't have undock option
I just purchased a T400s, scrubbed it completly and installed Windows 7. I'm gradually installing Vista drivers in hope of getting some advanced functionality. I also purchased a Series 3 advanced dock. The Start menu doesn't show an undock optio