Error in configure ODBC for 10g

I am getting an error message when I try and test my ODBC connection. I am using the Oracle 10g client and I am trying to setup the new ODBC using the ODBC configuration found under the Admin tools. I am running Windows xp and I am trying to connect to Oracle on an Linix machine.
Here is the error I get when it try and test the ODBC configuration.
Unable to connect
SQLState=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified

Hi Kamalakkannan,
Something needed to be noticed:
1. There are some sqlcmd options that are not available, for more information, please refer to:
http://msdn.microsoft.com/en-us/library/hh568447.aspx
2. For specify the instance of SQL Server:
-S [protocol:] server[\instance_name][,port]
Specify the instance of SQL Server to which to connect. Or, if -D is used, a DSN. When using the SQL Server ODBC Driver for Linux, -S is required. For the SQL Server ODBC Driver for Linux, tcp is the only valid protocol.
Please ensure your SQL Server instance is configured to be remote connect, and tcp protocol is not blocked by the firewall. For more information, please refer to:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
Please post the statement you used, because it is helpful for us to detect the problem.
Best Regards,
Iric
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.

DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it.

When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Configuring APS for 10G ITU w/ Splitter

Does anyone have experience on configuring APS for 10G ITU card with Splitter so that in a case of signal degrade it will switchover to the protection path? The default switchover mechanism is based on LOL (Loss-Of-Light) but it wont help if signal degrades for example to -25dB. All experiences and best practices are wellcome.

I know the protection schemes (client, splitter, Y-cable etc.) but my question is how to configure splitter protection so that in a case of signal degrease it will do switchover to the protection path.
See below an output from ONS15530:
ONS15530_1>sh aps
AR : APS Role, Wk: Working, Pr: Protection
AS : APS State, Ac: Active, St: Standby, NA: Not Applicable
IS : Interface State, Up: Up, Dn: Down
MPL: Minimum Protection Level, SD: Signal Degrade, SF: Signal Failure
LOX: Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync,
LOL: Loss of Light, - not currently protected
Interface AR AS IS MPL Redundant Intf Group Name
~~~~~~~~~~~~~~~~~~~~~ ~~ ~~ ~~ ~~~ ~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
Wavepatch1/0/0 Wk Ac Up LOX Wavepatch1/0/1 CH1
Wavepatch1/0/1 Pr St Up - Wavepatch1/0/0 CH1
So APS will switch to the protection path only in a case of Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync. So it WONT do the failover if RX signal level degreases below the minimum RX level (-23dB for 10G ITU card), because there is still light coming (not LOL case). So how do I protect my system against this kind of signal degreade?
rgds,
Jp

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Sync Error :CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB

Very frustrated with BB Link, I keep getting sync error:
CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB
Does anyone know how to fix this?
Thanks
Tom

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

Error using "Microsoft ODBC for Oracle" driver

I am trying to connect to Oracle 10g Express Edition from Access 2003 on Windows XP. I created a DSN using "Microsoft ODBC for Oracle" driver. When I try to connect using ADO, I get this error:
[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
I googled this error and got a lot of hits but no solution.
Any help would be greatly appreciated. I am new to Oracle and am coming from SQL Server 2000.
Thanks a lot!

This is the connection string I am using:
Conn1.ConnectionString = "driver={Oracle in XE};Dbq=GMIS_LIVE.WORLD;Uid=Administrator;Pwd=ubs;"
These are the contents of my tnsnames.ora (what entries do I add to make this work)?
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = your-a9279112e3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)

Authorization error while configuring TREX for HR - talent search

Hi All
HR team is performing talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they get this error "Error while preparing".
For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
24.10.2011 08:34:16 Job started
24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
Here they have SAP_ALL assigned and even then they are getting above authorization related error .
Your advise will be really helpful. Thanks in advance for your help.
Regards,
Aditya

TREX also uses gateway programs.
Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
There are also some SAP notes about this...
Cheers,
Julius

Getting error while Configuring NWA for PI 7.1

Hello All,
I'm presently working on PI 7.1, trying to configure /nwapi and for that purpose, implementing note # Note 1160261 - NWA for PI: Incomplete Component Tree.
I'm presently in step # 5 for running Template Installer step -Configuring the Central NWA and getting error "Validation Error: Failed to retrieve CCMS Agents."
To sort out, i did install CCMS agents for both ABAP & Java stack keeping Solution manager as my central system, although my both agents are running fine, still i'm getting this error, due to which i'm not able to proceed ahead. Please help me, if anyone has come across the same & wat should be the path forward for it.
Eagerly waiting for some inputs...
Thanks,
Anand.

Hi Anand,
When configuring NWA for PI, it wants the PI system as CEN. So you have to register the CCMS agents at the PI system.
With kind regards,
Henk.
Sorry for the same remark twice. The Expert Forums were experiencing a little hickup, I suppose...
Edited by: H. Steenwijk on May 28, 2009 12:22 PM

Error while configuring credential for Adobe Forms

Hi,
While configuring Credential i am getting an error as popup. But when I click on OK, I am able to see the .pfx file in the top.
Error Details:
An error occurred while updating the credential expiry for alias 'ReaderRights':
com.adobe.service.sap.configuration.ConfigurationException:Unable to load keystore from credential. Please ensure the password is correct.
We have not received any password from SAP, only there was one password to download the file.
After all I am trying print forms, not an interactive form. But when I deploy and run it shows error.
Error Details:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Sat Nov 26 11:54:53 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM8997397967410486296.dir\DM-8285166541278556430.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
Please suggest the solution.
Thanks,
SA.

Hi,
Still I have not got any solution for this. But my bigest problem right now is, I am using print form and there is no interactive feature. There is lot of forum posts where it is specified that, credentials is not required for print forms..... But when I try to deploy the Adobe application I get below error....
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Thu Nov 24 20:00:50 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM400443135109740914.dir\DM-4094495003961307306.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
General error information:
IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
Please suggest....
Thanks.
SA

Error while configuring credential for Adobe service

Hi,
While configuring Credential i am getting an error as popup. But when I click on OK, I am able to see the .pfx file in the top.
Error Details:
An error occurred while updating the credential expiry for alias 'ReaderRights':
com.adobe.service.sap.configuration.ConfigurationException:Unable to load keystore from credential. Please ensure the password is correct.
We have not received any password from SAP, only there was one password to download the file.
After all I am trying print forms, not an interactive form. But when I deploy and run it shows error.
Error Details:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Sat Nov 26 11:54:53 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM8997397967410486296.dir\DM-8285166541278556430.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
Please suggest the solution.
Thanks,
SA.

Hi,
Still I have not got any solution for this. But my bigest problem right now is, I am using print form and there is no interactive feature. There is lot of forum posts where it is specified that, credentials is not required for print forms..... But when I try to deploy the Adobe application I get below error....
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Thu Nov 24 20:00:50 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM400443135109740914.dir\DM-4094495003961307306.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
General error information:
IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
Please suggest....
Thanks.
SA

Error while configuring Webgate for simple mode authentication

Trying to convert open mode authentication to simple mode. Followed the documentation.
http://download.oracle.com/docs/cd/E12530_01/oam.1014/b32419/trnscrty.htm#BGBGEIFB
Was able to get identity server and access server configured. As in...got no error. When trying to change to simple mode for Webgate getting the following error....
Client authentication failed, please verify your WebGate ID.
Command executed for one of the webgates is below....Any thoughts??
./start_configureWebGate -i /u01/app/oracle/product/10.1.4.2.2/OAM/webgate/access -t WebGate -R
Please enter the Mode in which you want the Web Gate to run : 1(Open) 2(Simple) 3(Cert) : 2
Please enter the Password for this Web Gate :
Please note that the Global Access Protocol Pass phrase has to be the same across all Access Servers and Web Gates installed in Simple mode
Please enter the Global Access Protocol Pass phrase :
Preparing to generate certificate. This may take up to 60 seconds. Please wait.
Generating a 1024 bit RSA private key
........................++++++
.......................................++++++
writing new private key to '/u01/app/oracle/product/10.1.4.2.2/OAM/webgate/access/oblix/config/simple/aaa_key.pem'
writing RSA key
Using configuration from /u01/app/oracle/product/10.1.4.2.2/OAM/webgate/access/oblix/tools/openssl/openssl_silent.cnf
DEBUG[load_index]: unique_subject = "yes"
Check that the request matches the signature
Signature ok
The Subject's Distinguished Name is as follows
countryName :PRINTABLE:'US'
stateOrProvinceName :PRINTABLE:'Some-State'
localityName :PRINTABLE:'Locality Name'
organizationName :PRINTABLE:'Some-Organization Pty Ltd'
organizationalUnitName:PRINTABLE:'production'
commonName :PRINTABLE:'hostName.domainName.com'
emailAddress :IA5STRING:'[email protected]'
Certificate is to be certified until Sep 29 18:20:01 2011 GMT (365 days)
Write out database with 1 new entries
Data Base Updated
Client authentication failed, please verify your WebGate ID.

Is the Access Server already in Simple Mode, and does the AccessGate definition in the Access System Console have "Simple" transport security mode set?
Regards,
Colin

Error while configuring Debugging for WebDynpro Application

Hi Experts,
I am trying to configure Portal server for debugging a WebDynpro application.
In NWDS , in Debug configuration
When i tried to add my Webdynpro Project and application under Debug tab , No problem.
But when i checked J2EE Engine tab : it showed the following error.
[J2EE Engine]: the selected server node does not run in restricted load balancing mode, please configure it correctly so that the URL extention can be used
And ignoring it when i started debugging the application , the URL was formed like this :
http://<host>:50000/@@@DEBUG@@@7672950/webdynpro/dispatcher
/local/WDtest/WDtest?SAPtestId=1
with the error : The requested resource does not exist.
Details: Go to main page of this application!
Can anybody help me to fix the configuration.
Regards,
Ashish Shah

Hi,
To configure to the debugging mode... follow the steps:
1. Select "SDM" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "SDM" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru

Error: while configuring logs for changes in infotype data

Hi All,
I am configuring the following Tables for maintain logs for changes in infotype data.
V_T585A, V_T585B and V_T585C
While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
Please let me know, what does this warning message means?
Also, How is the report RPUAUD00 read?
Regards
Simran

Hi Simran,
you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
Regards,
Praneeth kumar

Error in configure ODBC for 10g

Similar Messages

Maybe you are looking for