Error in creation of Tabstrip Control

Hi Guy's
Please help me i created one sample tabstrip, when executing this program i am getting error message" SQL Error in the database when accessing a table". Pasting my code here please help me where i did mistake. it is very urgent.
1) IN SE-38
tables : kna1.
data : begin of itab occurs 0,
land1 type LAND1_GP,
name1 type NAME1_GP,
end of itab.
*& Module USER_COMMAND_0100 INPUT
case sy-ucomm.
when 'DISP'.
select land1 name1 from kna1 into itab where kunnr = kna1-kunnr.
append itab.
endselect.
when 'EXIT'.
leave program.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
MOVE-CORRESPONDING ITAB TO KNA1.
ENDMODULE.
2) IN SE51-Fow Logic and layout of Screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING 'ZSHANTHU1' '110'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN SUB.
3) In the screen -110 Flow logic and Layout
PROCESS BEFORE OUTPUT.
MODULE STATUS_0110.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
Edited by: sai shanhu on Apr 11, 2008 1:32 PM

Hi,
From the message it seems either you are using wrong company code in Organisation data of the PO or the company code need to be assigned to country in spro-enterprise structure-Financial accounting-edit copy check company code.
Please check this.
Dhruba

Similar Messages

Module Pool (tabstrip control Error : )

I am trying to activate tabstrip control in module pool but error is coming like no sub screen is assigned to tabstrip pushbutton
tab12.
my main screen is : 0221
flow logic for 0221 is below :
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0321'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0322'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
and 0321 and 0322 is subscreen and i also gave ref field sub1 and sub2 .
can you plz help me to solve the problem ?

Hi,
yes i created sub screen. i am going to explain what i have done .
step : i created screen 200 (i choose subscreen)and inside 200 i put tabstripcontrol then in tab1 i gave ref field sub1 and tab2 i gave ref field sub2 and fatch code ic1 and ic2.
and then i created screen 221 and 222.
inside 200 flow logic i wrote below code but still its giving me same error.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0221'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0222'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
i dont know is it required to make any normal screen .
please try to give me ans as soon as possible.

Screen error in tabstrip control

hi all,
I'm practicing a program for Tabstrip control.
it will be like this
tab1 tab2
number1 result
number2
number1 number2 result are of integer data types.
now the problem is
the program is giving result when I declare the above variables as char...that to with some limit.
but if the varilable are of type int program is givng an error called screen error.
why this is happening ?
whats the solution for it?
points assured,
Usha.

HI,
try like this...
1.goto that perticular Screen Element List, there you will find a tab General Attributes.
2.In that change the Format Column for that perticular field from CHAR to INT1 ( by default it will take as CHAR ).
now you will not get any error.
Regards,
Sathish Reddy.

Program errors working with OOPS ALV in a Tabstrip control

Hi Experts,
I am displaying an ALV grid in a Tabstrip control in dialog program and its getting displayed fine. However when I am presing any of the standard push buttons like sort, export etc., I am getting a pop up with icon 'STOP' and beside its mentioned 'Program errors'. Please let me now if there is any solution for this issue.
Thanks and Regards,
Praveen.

Got the solution. We must declate the internal table that is bening passed into the set_table_for_first_display as global variable always.

Problem in Tabstrip Control in Custom Infotype Creation

Hi All,
Can any body tell me how to process with Tabstrip Control in an Custom Infotype.
Iam creating Customizing Infotype With Tabstip Control.The Tabstrip Control have 2tabs.Each tab have Custom some fields.
But iam not able activating the sample Tabstrip control.
Can u tell me how to approach to create this in Modulepool programming for my Custom Infotype.
Points wil be rewarded.
Thanks,
N.L.Narayana

Hello Swapna,
Thanks for your reply.
This is my code for tabstrip control.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
   WHEN 'BOOK'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 1.
     tabb1-activetab = 'TABS1'.
     option = '1'.
   WHEN 'SUMM'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 2.
     tabb1-activetab = 'TABS2'.
     option = '2'.
   WHEN 'POST'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 3.
     tabb1-activetab = 'TABS3'.
     option ='3'.
*CH01 start
   WHEN 'RSET'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 4.
     tabb1-activetab = 'TABS4'.
     option = '4'.
ENDCASE.
case option.
when '1'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p1_werks is initial or p1_lgort is initial or
      p1_bstar is initial or p1_gjahr is initial.
     message e000(vz) with text-001.
   endif.
ENDIF.
when '2'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p2_gjahr is initial.
     message e000(vz) with text-005.
   endif.
ENDIF.
when '3'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p3_gjahr is initial.
     message e000(vz) with text-005.
   endif.
    ENDIF.
*CH01 start
when '4'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if s4_werks is initial or p4_gjahr is initial.
     message e000(vz) with text-001.
endif.
if p4_book is initial and
     p4_summ is initial.
     message e000(vz) with text-022.
endif.
   ENDIF.
endcase.
I can give you some more information.
If I execute from program it is working fine, if I execute from T.code it is not working properly.
Regards.
Krishna.

ERROR VNIC creation job failed

Hello All,
I have brought oracle VM X86 manager into ops center 12c control. When I try to create a new virtual machine it is throwing the ‘ERROR VNIC creation job failed’ error. Can anybody throw some light over this issue.
Thanks in advance.
Detailed log is
44:20 PM IST ERROR Exception occurred while running the task
44:20 PM IST ERROR java.io.IOException: VNIC creation job failed
44:20 PM IST ERROR VNIC creation job failed
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmCreateVnicsTask.doRun(OvmCreateVnicsTask.java:116)
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmAbstractTask.run(OvmAbstractTask.java:560)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
44:20 PM IST ERROR sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
44:20 PM IST ERROR java.lang.reflect.Method.invoke(Method.java:597)
44:20 PM IST ERROR com.sun.scn.jobmanager.common.impl.TaskExecutionThread.run(TaskExecutionThread.java:194)
Regards,
george

Hi friends
I managed to find the answer. Internally it is has some indexes in the data base level. It still maintains the indexes in the shadow tables. Those all need to be deleted. With our Basis team help I have successfully deleted those and recreated the indexes.
As Soorejkv said sap note 1283322 will help you on this to understand the scenarios.
Thank you all.
Regards
Ram

Adding tab in tabstrip control dynamically..........

Hi ,
    I am using TabStrip control of PDK .NET. I want to add tab dynamically in tabstrip control.
But I am getting error for any postback when I switch in between tabs.
Error description is :
<b>"Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index"</b>
<b>Stack Trace:
[ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index]
   System.Collections.CollectionBase.System.Collections.IList.get_Item(Int32 index) +2382545
   SAP.Web.UI.Controls.TabCollection.get_Item(Int32 index) +6
   SAP.Web.UI.Controls.TabStrip.LoadPostData(String sPostData, NameValueCollection oPostCollection) +92
   System.Web.UI.Page.ProcessPostData(NameValueCollection postData, Boolean fBeforeLoad) +674
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2965</b>
Any help appreciated?
Regards,
Prashant

Hi Prashant,,
your index is less than zero, the postback will not store it unless you explicitly save it using 'enable view state' for the tree control, if it is already enabled and still not working: here is the work around :-
you can store it in a hidden input field, so that it can be retrived when you do a postback, and then reassign the current index
it should be a relatively simple fix
please let me know how you get along...
with respect,
amit

Account determination error - in creation of invoice

Hello experts,
i have an error in creation of invoice, after( pgi post goods issue)
will you please help me out to solve this error.
thanks & Regards,
yogesh raina

hello sir,
After going throuth this path it shows no gl account in account determination chart
as below
Condition type     Message     Description
ZPR0                                  123     Access KOFI not carried out (initialized field)
Access     Message     Description
10     123     Access KOFI not carried out (initialized field)
20     121     No G/L account found in Account determination type KOFI
30     123     Access KOFI not carried out (initialized field)
40     121     No G/L account found in Account determination type KOFI
50     121     No G/L account found in Account determination type KOFI
60     123     Access KOFI not carried out (initialized field)

Error in creation of Object Type from XML passed

Hi,
I am facing a problem creating a appropriate a object type for a XML.
Below are the details:
XML Passed
<mer_offer_action_data>
<form_id>
134039588
</form_id>
<action_cd>
OA
</action_cd>
<offer_decline_reason_cd>
</offer_decline_reason_cd>
<start_dt>
</start_dt>
<candidate>
<ds_prs_id>
109315
</ds_prs_id>
<ds_prs_id>
110534
</ds_prs_id>
<ds_prs_id>
110059
</ds_prs_id>
</candidate>
</mer_offer_action_data>
Types Declaration
+CREATE OR REPLACE type MER_OFF_CANDIDATE
AS
OBJECT
DS_PRS_ID NUMBER
CREATE OR REPLACE TYPE MER_OFF_CANDIDATE_t
AS
TABLE OF MER_OFF_CANDIDATE;
CREATE OR REPLACE type MER_OFFER_ACT_DATA
AS
OBJECT
FORM_ID NUMBER,
ACTION_CD VARCHAR2(6),
OFFER_DECLINE_REASON_CD VARCHAR2(6),
START_DT VARCHAR2(11),
CANDIDATE MER_OFF_CANDIDATE_t
CREATE OR REPLACE TYPE MER_OFFER_ACT_DATA_t
AS
TABLE OF MER_OFFER_ACT_DATA;
CREATE OR REPLACE type MER_OFFER_ACTION_DATA
AS
OBJECT
MER_OFF_ACT_DATA MER_OFFER_ACT_DATA_t
/+
My Declaration
+merOffActDataXML xmltype;
merOffActData MER_OFFER_ACTION_DATA := MER_OFFER_ACTION_DATA(MER_OFFER_ACT_DATA_t());+
Inside Pl/SQL block
+-- Converts XML data into user defined type for further processing of data
xmltype.toobject(merOffActDataXML,merOffActData);+
when I run the Pl/Sql block it gives me error
ORA-19031: XML element or attribute FORM_ID does not match any in type ORADBA.MER_OFFER_ACTION_DATA
which means the object type mapping is wrong
I would like to know whether the object type I had created is correct or not.
Thanks for your help
Beda

Bedabrata Patel wrote:
Below are the details:The details except for a description of the problem
I am facing a problem creating a appropriate a object type for a XML.And which error you are getting
Error in creation of Object Type http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/toc.htm
And which version of Oracle you are getting the unknown error creating the unknown problem.

Error in creation of Object Type

Hi,
I am facing a problem creating a appropriate a object type for a XML.
Below are the details:
XML Passed
<mer_offer_action_data>
     <form_id>
          134039588
     </form_id>
     <action_cd>
          OA
     </action_cd>
     <offer_decline_reason_cd>
     </offer_decline_reason_cd>
     <start_dt>
     </start_dt>
     <candidate>
          <ds_prs_id>
               109315
          </ds_prs_id>
          <ds_prs_id>
               110534
          </ds_prs_id>
          <ds_prs_id>
               110059
          </ds_prs_id>
     </candidate>
</mer_offer_action_data>
Types Declaration
+CREATE OR REPLACE type MER_OFF_CANDIDATE
AS
OBJECT
DS_PRS_ID NUMBER
CREATE OR REPLACE TYPE MER_OFF_CANDIDATE_t
AS
TABLE OF MER_OFF_CANDIDATE;
CREATE OR REPLACE type MER_OFFER_ACT_DATA
AS
OBJECT
FORM_ID NUMBER,
ACTION_CD VARCHAR2(6),
OFFER_DECLINE_REASON_CD VARCHAR2(6),
START_DT VARCHAR2(11),
CANDIDATE MER_OFF_CANDIDATE_t
CREATE OR REPLACE TYPE MER_OFFER_ACT_DATA_t
AS
TABLE OF MER_OFFER_ACT_DATA;
CREATE OR REPLACE type MER_OFFER_ACTION_DATA
AS
OBJECT
MER_OFF_ACT_DATA MER_OFFER_ACT_DATA_t
/+
My Declaration
     +merOffActDataXML          xmltype;
     merOffActData          MER_OFFER_ACTION_DATA := MER_OFFER_ACTION_DATA(MER_OFFER_ACT_DATA_t());+
Inside Pl/SQL block
     +-- Converts XML data into user defined type for further processing of data
     xmltype.toobject(merOffActDataXML,merOffActData);+
Thanks for your help
Beda
Edited by: Bedabrata Patel on Jul 12, 2010 5:51 AM

Bedabrata Patel wrote:
Below are the details:The details except for a description of the problem
I am facing a problem creating a appropriate a object type for a XML.And which error you are getting
Error in creation of Object Type http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/toc.htm
And which version of Oracle you are getting the unknown error creating the unknown problem.

Error in Creation of Object ID 00000000 is not allowed

Hi all,
When I am Hiring an employee using PA40, I am getting an error as "Creation of Object ID 00000000 is not allowed", when I save it.
In the NUMKR Feature, the return value has been assigned to the Personnel Sub Area.
Pls. can anybody explain, how can I solve this problem.
This is urgent requirement of client.
Thanks,
HR User.

Hi Hr user
Now listen carefully.
1. If you have defined your feature NUMKR according to PSA then while running hiring action does PSA comes or it just gives you the Position, PA, EG and ESG fileds only.
2. If the first condition is true then you will get the error, now the question is why
Answer, you have defined the feature through PSA and once you try to save the IT0000 there is no PSA mentioned there thats why the system gives you the error.
If this explnanation is understood by you than reply , i will tell you how you can bring the PSA field also in hiring action at IT0000.
Do reply
Regards,
Bhupesh Wankar

Error in creation of Cost center

Hi All,
Trying to create Cost Center through KS01, however I am getting an error as "No compnay Code assignemt to the Contrilling area TS". can anyone please explaine me on the process to chek this error.
Bharath

HI Bharath,
Please check the spro seeting for this error.
spro -> enterprise structure - > Assignemtn - >controlling - > Assign Company Code to Controlling Area.
Please check whether the required Company code has been assigned to the Controlling Area. If not please assign the required and check or the same.
Please note: A company code can be assigned to one controlling are only
Regards,
Madhu Sudhanan

Crystal Report/STRUTS: Error (404) when clicking on Control Buttons (Print, Export, Next, Previous, etc...) on report viewer

Post Author: jwenny
CA Forum: Deployment
Need help badly!!!
We are using the crystal reports plugin for STRUTS.
We are able to display the report in the crystal report viewer. However, when we click any control buttons (print, export, etc...), then we get:
JSPG0036E: Failed to find resource /Report-viewer.jsp
We then moved Report-viewer.jsp to the WebContents folder (root directory) and got a different error when we clicked any control button:
Error: 400 page not found
Does anyone know how to solve this problem? For instance, is there a setting or parameter that needs to be set?
Greatly appreciate any help!

HI,
Whenever we print the viewer does an auto postback, I believe due to this some of the values are getting missed. Moreover we are referring to the viewer and reportdocument object, it seems. So can you try this simple code in an application to see if it helps:
ReportDocument rdoc = new ReportDocument();
rdoc.Load("C:\TASKECrystalReports\Intraday.rpt");
rdoc.SetDatabaseLogon("uid","pwd");
rdoc.SetParameterValues("parameter name","value");
CrystalReportViewer.ReportSource = rdoc;
Helps?
Thanks.

How can i hide a tabstrip control

On my screen there are a pushbutton and a tabsrtip control which contain two tabs.
initial,the tabstrip is visible,and the button with icon_collapse icon.
then,i click the button ,and the tabstrip must be invisible,and the button's icon will change to icon_expand.
if i use screen-name conditions to set the tab invisible,but the tabstrip has a shadow on the screen.the color of the space obtained by the tabstrip is different with other space's color.
How can i set the color same with other if i want to hide the tabstrip.
ths very much.

see the example of custom tabstrip control for 0591 infotype
MODULE ztab_strip_active_tab_set OUTPUT.
   IF psyst-dsubt EQ 'BNPF'.
     g_ztab_strip-pressed_tab = c_ztab_strip-tab2.
     LOOP AT SCREEN.
       IF screen-group4 = '060'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
   ELSEIF psyst-dsubt EQ 'BNES'.
     g_ztab_strip-pressed_tab = c_ztab_strip-tab1.
     LOOP AT SCREEN.
       IF screen-group4 = '050'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
   ENDIF.
   IF   psyst-dsubt NE 'BNPF' AND psyst-dsubt NE 'BNES'.
      LOOP AT SCREEN.
       IF screen-group4 = '050'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
      LOOP AT SCREEN.
       IF screen-group4 = '060'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
     g_ztab_strip-pressed_tab = ' '.
   ENDIF.
   ztab_strip-activetab = g_ztab_strip-pressed_tab.
   CASE g_ztab_strip-pressed_tab.
     WHEN c_ztab_strip-tab1.
       g_ztab_strip-subscreen = '0201'.
     WHEN c_ztab_strip-tab2.
       g_ztab_strip-subscreen = '0203'.
     WHEN OTHERS.
       g_ztab_strip-subscreen = '0202'.
   ENDCASE.
ENDMODULE.                    "ZTAB_STRIP_ACTIVE_TAB_SET OUTPUT
check this for hiding one tabstrip in one subtype and another in next subtype

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

Error in creation of Tabstrip Control

Similar Messages

Maybe you are looking for