Error in CRM outbound queue

Hi Guys
When I create or modify a customer in CRM to ERP is not replicated, in the outbound queue indicates CRM SYSFAIL error that says:" Gruping is not assigned and account group in IS-M".
Please help my!
Thank you
winston

Hello Winson,
Please check wether you have note 1294123 appied.
If the problem happens although the note is applied in your system, please creat SAP customer message to report this error.
Thanks and regards,
Maggie

Similar Messages

  • FATAL_ERROR in CRM outbound queue

    Hi,
    In CRM Outbound queue SMQ1  (SALES ORDER) we are getting some dumps as follows.
    Exception condition "FATAL_ERROR" raised.
    But in ST22, I cannot see any  dumps caused by this.    Please help.
    Thanks & Regards
    Sunil

    Hello Sunil,
    look up the function call used in doc flow by clicking on the bdoc.
    Set a breakpoint there.
    Lookup error nummer and error class (you can search all error text in table t100)
    Set a conditional breakpoint on sy-msgno with condition sy-msgno = <yournumber>
    Let the code itself tell you why you get a fatal error.
    You might want to check the general connectivity betweeen crm and erp as well.
    Are there any green bdocs exchanged betweeen the Systems?
    Greetings Lutz

  • Error in SMQ1 outbound queue in SAP CRM

    Hi SAP CRM Experts,
    When the changes are made to an existing order in SAP CRM and in change mode showing the message as "Document is being distributed-changes are not possible".I have cheked the SMQ1 , there was  sysfail with info " The ASSERT condition was violated" and in SMW01 BDOC state as " Sent to receivers (not all have confirmed)".Also in the SAP R/3 , there was a short dump " Assertion-Failed.
    What could be the probable  reason for this ?
    I Would appreciate providing  the solution at the earliest.
    Best Regards
    Succhi

    Hi,
    The short Dump may help you to find where exactly the error is.
    Check in which program are you getting this Dump. Is it sandard or custom?
    Also in short dump you will be able to see the part of code where the system throws the error.
    this can give a good idea on the issue.
    Regards,
    PP

  • Outbound Queue help

    Hello Experts,
    We use XI for data replication from CRM to R/3. Now because of error  in one outbound queue all the remaining queues are getting stuck. We want to do this, even if there is an error in one queue we should be able to process the remaining queues. for example, Queue 1 has some error and we have 100 queues, so other we should be able to process other 99 queues without any problem. Its consuming so much time.
    Please reply.
    Points will be rewarded generousely.
    Sajjan

    help out for Inbound & Outbound queue

  • Error in Outbound Queue while Releasing order from CRM to ECC

    Hi,
    When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
    This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
    Can you please tell me why this error is coming?
    Thanks,
    Sandeep

    Hello Sandeep,
    During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
    If a call screen is executed, there is the mentioned error.
    Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
    Best regards,
    Maggie

  • QRFC Outbound queue errors

    Hi All,
    I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
    The status is "SYSFAIL " .
    Can anybody tell me how to solve them.
    Regards,
    Anindya

    HI Anindya,
    It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
    Reward Points if helpful
    Cheers
    Manohar

  • Error in outbound queue. Packed field contains incorrect BCD format

    Hi,
    Can anyone please help me with this.
    In the outbound queue of CRM, the queues are stuck up in SYSFAIL state.
    The error is ' Packed field contains incorrect BCD format.'
    Can anyone suggest what this could mean?
    Regards,
    Pratima

    Hi Pratima,
    In the CRM Server, the structure has more fields than in the R/3 System. Fields BAPISDIT-TAX_AMOUNT, BAPISDIT-CR_EXCHRAT_V and BAPISDIT-EXCHRATEST_V have data type 'DEC' and do not exist in the R/3 System. During the initial download, the fields receive the value '020202...' and cause the termination "The packed field does not contain a correct BCD format" in function module CRM_SALESDOC_MAP_BAPI2MBDOC.
    Use Transaction SE11 to add the following fields at the end of structure BAPISDIT in the R/3 System:
    PLANDLVSCH     PLAVO      CHAR      4
    SEQUENCENO     CHAR35     CHAR     35
    CREDPRIC       UMREFF     FLTP     16
    PAY_GUARAN     CHAR2      CHAR      2
    GURANTEED      UMREFF     FLTP     16
    CFOP_CODE      CHAR5      CHAR      5
    TAXLAWICMS     CHAR3      CHAR      3
    TAXLAWIPI      CHAR3      CHAR      3
    SD_TAXCODE     CHAR2      CHAR      2
    VALCONTRNR     CHAR10     CHAR     10
    VALCONTRIT     POSNV      NUMC      6 *
    ASSORT_MOD     W_SORTK    CHAR     18 *
    VALSPECSTO     KZBWS      CHAR      1
    MATGRHIE1      CHAR18     CHAR     18
    MATGRHIE2      CHAR18     CHAR     18
    PROMOTION      KNUMA_PI   CHAR     10 *
    SALES_DEAL     KNUMA_AG   CHAR     10 *
    FLGLEADUNI     CHAR1      CHAR      1
    FREE_GOODS     CHAR1      CHAR      1
    VALID_OBJ      TECHS      CHAR     12
    TAX_AMOUNT     BAPICUREXT DEC      28
    MRP_AREA       BERID      CHAR     10
    CUST_MAT35     CHAR35     CHAR     35
    CR_EXCHRTV     STCUR_AP   DEC       9
    EXCHRATSTV     STCUR_AP   DEC       9
    or Implement SAP Note: 498317.
    Thanks

  • CRM 5.0 outbound queues to Mobile sales

    Hi all,
    We have upgraded from CRM 3.0 to CRM 5.0.
    I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
    But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
    Does this mean no data is actually being passed from CRM to Mobile Sales.
    At this point of time  I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
    Thanks.

    Hi KP,
    This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
    Regards,
    Ankan

  • Billing Document queues are stuck in CRM Outbound

    Hi All,
    In our system there are huge number of CSA_BEACRMB_BD* Queues generating in CRM Outbound (SMQ1) and getting into "Ready" state with RFC destination as "NONE". These queues are of no use. Please guide me how to stop generating this Queues. FM used for this queues is /1BEA/CRMB_BD_MWC_O_VALIDATE.
    Regards,
    Das

    Hello,
    I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
    My guess is
    Customer Relationship Management
    Billing
    Country-Specific Functions
    Official Document Numbering
    Transfer Official Document Numbers to Accounting Documents
    Check whether there is an entry somewhere there forcing the System to behave the way it does.
    Lutz

  • Outbound Queues in CRM system

    Dear All,
    There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
    delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
    queues are getting there then it will really helps..
    Thanks,
    Sapta

    Check in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.

  • Reg:Outbound Queues are strucked in CRM

    Hi All,
             After Extracting Data from CRM source system,the rercords are still displaying in the outbound queues of the CRM Source system.what might be the issue?In outbound queues the status is NOSEND or is it maintaining one more copy of the records.what happens manually if the queues are  deleted.if any queues are deleted the posting to BI  is stopped.If any data is missed by deleting the queues ,shall we recover the data back.what are the steps to schedule the those jobs in BI.
    Thanks & Regards,
    MD.Kalim.

    Hello,
    I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
    My guess is
    Customer Relationship Management
    Billing
    Country-Specific Functions
    Official Document Numbering
    Transfer Official Document Numbers to Accounting Documents
    Check whether there is an entry somewhere there forcing the System to behave the way it does.
    Lutz

  • Outbound Queue in ECC with CRM Destination

    Dear experts
    In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
    I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
    What are the settings to avoid this outbound queue to be created?
    Thanks in advance,
    Regards, Stephanie

    Hello Stephanie.
    Please remove the following table entry in your ECC system:
    TBE31 (Application components by Publish & Subscribe interface)
    - The following entries must exist for a successful data exchange:
                     Event            00501014
                     Obj.class        BUSPROCESSND
                     Fmodule          CRS_SALES_COLLECT_DATA
       Also see Note 490932.
    Best regards,
    Maggie

  • Need to know how to check the outbound queue in SAP for data flow into CRM

    Hi Specialist's,
    I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
    I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
    Is there any other way in SAP that i can check?
    Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
    Usefull answers will definitely be rewarded with points .
    Thanks,
    Abhinav.

    Hi Abhinav,
    There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
    Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
    If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • District data missing in the Outbound Queue of CRM

    Hi,
    We have an issue with the information not flowing to the Outbound Queue of CRM.
    For eg . When we change the District information for a BP and synchroniye the system, the information is flowing in the Inbound queue to the CRM system and we are able to find the District data in the Bdoc. But when we check the Bdoc in the Outbound queue of CRM for this site, this District information is missing over there.
    Any pointers on this would be of great help.
    Regards,
    Rasmi.

    Hi Rashmi
    Which BDoc did you check -  the MBDoc or the SBDoc?
    I guess the first thing to do would be to see if the information is correctly updated in the CDB.
    If the district is missing in the CDB entry then the problem is with the synchronisation between BUT000 and SMOKNA1
    You may have already checked this but I just thought I would ask
    James

  • CFM2 Outbound Queue Error

    Dear Experts,
    We are getting following error when we start activation from transaction /CFM2
    Outbound Queue Blocked
    System:    CAQCLNT001    User:  SAP_ADMIN 05.02.2010 10:33:1
    Function/Q/SAPAPO/CIF_PROD_INBOUND
    Text:        Logical system CCQCLNT224 has not been assigned
    How can we fix it,
    Best Regards
    Edited by: Wilian Segatto on Feb 5, 2010 8:04 AM

    This error is because logical system is not assigned to Business system group.
    First ensure that you are using correct logical system name while creation and activation of integration model.
    If it is correct go to path SPRO-integration with sap components- Integration via core interface-Assign logical system and queue type assign this logical system to proper buisness system group.
    Hope this helps.
    Santosh

Maybe you are looking for