Error in Currence Conversion..............
Hi All,
When , iam trying to rum pay roll i'm getting an Currency conversion error can any one guide me please...
THE ERROR IS ............
Enter rate INR / FRF rate type M for 01.01.2008 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction
Thanks in advance,
Vinod.
Hai
SM30, V_TCURR
maintain an entry for currency exchange type for M, for the relevant currencies... for the date..
Edited by: Ram Manohar on Apr 1, 2008 12:25 PM
Similar Messages
-
Error during currency conversion and consistency check in a sales order
Hi Experts,
I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
Thanks,
SriHi Christophe,
FYI
Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
Message Class - CRM_CUMULATED_I
Message No - 013
Error during currency conversion for &1 and &2
Message Class - CRM_CUMULATED_I
Message No - 008
Consistency check: Logical key does not match
Message Class - CRM_CUMULATED_I
Message No - 011
Thanks,
Sri -
Error in Currency Conversion and calculated conversion rate is too big
When I am trying to execute the Query,I can see the result but I received below Warning messages.
Also I am not authorized to check the conversion rate using TCURR.
1) Calculated conversion rate 301.149,42529 is too big.
The exchange rate 301.149,42529 was calculated via the base currency USD.This produced a rate which exceeds the maximum allowed value of 9999.99999.
System response : The Processing can not be continued because the calculated rate cannot be used.
2) Error occurred during currency conversion.
You attempted to Convert the currency.The system cannot find the valid currency into which to convert the value.
The OLAP Processor cannot convert the currency.The drilldown is not changed.
3) No Exchange rate from TRY to EUR and date 13.11.2009 is found.
Please reply.
Thanks in advance!Thanks fr the info. that u all hv given ..... I ran one program frm our side which will be updating the transfer exchange rates as u all have mentioned. But then , i am receiving the warnings.
Also,when i have checked the conversion rates,they r fine.
Please find the Below diagnosis ,which they hv given.
Diagnosis:
The exchange rate 301.149,42529- was calculated via the base currency USD. This produced a rate which exceeds the maximum allowed value of 9999.99999.
System Response:
The processing can not be continued because the calculated rate can not be used.
Procedure:
Check the conversion rate to the base currency USD and the exchange rate type E. If the rates are correct, you must agree different conversion factors for the currencies in question (e.g. 100:1 instead of 1:1), so that the resulting conversion rate does not exceed the value 9999.99999. Notification Number SG 119 .
Please solve this issue.Thanks in advance! -
Hi Friends,
While i am loading data from R/3 to BI using the 2lis_13_VDITM and 2lis_11_vaitm datasources i am gettig the error maintain conversion factors for aed/inr (currenct type 1001). I an gtting it for some data packets only.
Please suggest me what is the cause and How to resolve the error.........
Thanks&Regards
AnandHi
Problem Solved...............
I have transfered *Global Settings"............by Right click on the source system...Transfer Global Settings.....then the load is successful
Thanks
Anand -
Currency conversion error in SRM
Hi,
When we are trying post the confirmation in SRM it is giving the error message that "Error in currency conversion between EUR and USD".
We have checked the exchange rate settings in SRM and Backend (R/3) there is no issue at all. Everything is maintained properly but still the sytem is giving error.
PO currency and vendor currency is USD and company code currency is EUR.
Is there any other settings missing which is causing the error.
Thanks in Advance
S.ParvahihELLO Parvahi,
Did you check OB08 in backend if maintained properly? also check validity...
also on the SRM side is below report run using SA38?
Update exchange rate tables in component system :BBP_GET_EXRATE
Hope that helps
Arshad
Edited by: arshad ahmed on Feb 9, 2010 12:06 PM -
Currency Conversion terminates the query execution
Hi friends,
When I execute a query it terminates due to the following error in currency conversion. "Abort System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04 (see".
conversion works fine and gives correct values in target currency when the source currency is say thailand bhat, malaysian ringett, philippino peso etc.., but when i use the source currencies of zimbabwe or kenya i get this error and next the query terminates.
Can any one of you suggest me what could be the problem. How do i systemtically approach to solve this problem.
Thanks
RajHi Serjio
All the currencies mentioned currencies are available in the TCURR table including the exchange rates from those currencies to USD.
Hi Sven,
I am sorry, I really didnot understand when you say "set the flag for protocol to X". You may throw more light on this. I tried debugging the program RSW_CUR_TRANSLATION_RATE_GET in the past step-by-step. This leads to lots of other programs and i was really lost in them. Pls guide me to debug it effectively.
Hi Serjio/Sven,
Further, i missed out to mention the following details in my post. We have two version of a this COPA query. One is older and the other is newer. Both were created before we upgraded from 3.1C to NW2004s.
The older version works fine. The conversion from source to target currencies is good for the african currencies also besides the asia-pacific (AP) currencies. However, the newer version throws out the error message i have mentioned in the post for african currencies but works fine for asia-pacific currencies. Even the newer version was working fine before we upgraded from 3.1C to NW2004s. Its only after the upgrade that we are encountering this problem.
In the query we are also converting the data to SGD (singapore dollar), besides USD. As i donot require this data i have hided the values in SGD. As a reason we have never maintained conversion rates/factors for converion from any of the AP or African currencies to SGD. Due to these missing rates I get an Information message to maintain the conversion rates/conversion factors for AP/African curr to SGD. This message appears along with the error message(mentioned in my post) on the same screen. This information message also appears for the older version of my query, which is currently giving correct $values. But I think we can ignore this message. Else do you think, in some way these missing rates are responsible for the trouble??.
But more surprisingly why is that the older version is not impacted by the upgrade while the newer is affected?
Pls share your views
Thanks
Raj -
Currency conversion error in SAP HANA
Hi,
I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
I added a calculated column as follows:
When i click on "OK", i get error -
The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
and checkbox "calculate before aggregation" get unchecked. See screenshot below:
Please suggest what could be reason? Thanks in advance.
Regards,
AmitHi Amit,
If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
Regards,
Ravi -
Currency conversion Error in 0sd_c15
Hello Experts,
I am having a problem in the ETl of the cube 0SD_C15 .Its showing Currency conversion error
0MEANTODAY while loading data.Please help me in this regard
PrasadHi
You will find the transfer global settings for the source system where you are extracting the data.
Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
Then Reload the data into the cube,
After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
I think, this will work....
Regards
Sudheer -
Bex to Business Objects - Currency Conversion error in Webi
Hello,
I am attempting to transfer a Bex 7 key figure currency conversion to a Business Objects filter in a Universe for display in a Webi report. The version of Business Objects XI 3.1 SP2. The Bex Conversion Type is based off Calendar Month, and the Target Currency variable is a selection prompt. The filter is passed to the universe and prompts when the report is ran in Webi, but an error occurs if the currency is populated. For instance, if I populate the filter in Webi with 'USD', the following error occurs: The MDS query SELECT "....." failed to execute with the error Value 'USD' FOR variable "Currency" is invalid (WIS 10901).
I'm not sure if the currency conversion information is being properly transferred and translated to Business Objects. Does anyone have any insight on this issue?
Thank you,
BrockI was able to modify the dimension for the filter to retrieve the correct object (Ex. USD), but there are multiple incorrect selections for USD and other currency types. For instance, when I type in USD i get 5 different options, and the one with the description 'American Dollar' is the correct one. Why is Webi displaying all these different options? When I display the options for currency in Bex only one 'USD' is shown in the list. Here is my filter condition for currency type in the Universe:
<OPTIONAL><FILTER KEY="[SELCUR]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Select Currency','A','Organization\Cur Key',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL>
Cur Key is my customized hidden dimension
Thank you -
Unable to create shopping cart due to currency conversion error.
Hi,
We are currently working in a extended classic scenario. We have about 8 users connected under a common entity ( dept). Out of which for one user (user1) we are able to create the shopping cart and able to run the entire procurement cycle the entire cycle.
When we are trying to create a SHC with any other user ( user2 to 8) its giving the errors like
1) Currency Conversion Error ( to GBP). Please inform help desk.
2) Error in account assignment for item 0.
Attributes for all the users ( user1 to user8) are same and we are not getting any error in the attribute check as well.
Please suggest.Look up note 419423 + related notes to repair incorrect SRM users. What you report sounds a bit strange. A debugging session might be helpful too. Especially the 2nd error looks like something 'home-made'...
-
Benefits Service - Error occurred during currency conversion from to USD
I am attempting to run the add beneficiaries service in employee self servie and receive the following error message "Error occurred during currency conversion from blank to USD
Has anyone come across this error before?Both are set up properly. This error only happens on some US teammate records. It seems to occur after we do a refresh of our QA environment from our produciton environment
-
Currency conversion error by changing the currency
Hi all,
i am facing a problem by refreshing the query with another currency. f.e. i am calling the report in Euro and then i say refresh variables and change the currency in USD. So i get the same values and the currency conversion dont work.
I get the following alert message after i change the currency and run the report.
Diagnosis
You attempted to convert a currency. The system cannot find a valid currency into which to convert the value.
System Response
The OLAP processor cannot convert the currency. The drilldown is not changed.
Procedure
Specify a valid target currency.
Procedure for System Administration
This message can only appear for Web templates in which currency conversion is set manually (using the SAP BW URL). If this message appears following a currency conversion dialog box, an SAP error has occurred; report this error using OSS.
Can someone help me before i open a OSS error. Thanks.Hi,
did you check the setting in BI for source system ?
Else just try it
RSA1 - goto source system
Expand SAP
Context Menu of Source System
There are
Global Settings
Transfer Exchange Rate
Hope it will help you ...
BVR -
Regarding error while running currency conversion
While running currency conversion delivered package FXTRANS.LGF, I am getting an error as
'Failed to analyse prompt %CURRENCY_DIM%. Can you please help me out.
I checked currency dimensions----- Input currency and rpt currency and was fine with dimension type currency.
Can anyone please suggest some solutions.
thank you.Are your performing the currency conversion for a financial or consolidation application ?
If it is a consolidation application, you need to include in your script the "Group" dimension, not the "currency" one -
Hi All,
I am trying to run currency conversion and following is my script logic.
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %CATEGORY_SET%
TID_RA = %TIME_SET%
RATEENTITY = GLOBAL
CURRENCY = %RPTCURRENCY_SET%
OTHER = [ENTITY=%P_CC_SET%]
*ENDRUN_PROGRAM
I have also tried the following reading from other post
*RUN_PROGRAM CURR_CONVERSION
SELECT(%RptCurrency_SET%,"[ID]",RptCurrency,"[CURRENCY_TYPE]='R'")
CATEGORY = %CATEGORY_SET%
TID_RA = %TIME_SET%
RATEENTITY = GLOBAL
CURRENCY = %RptCurrency_SET%
OTHER = [ENTITY=%P_CC_SET%]
*ENDRUN_PROGRAM
My RPTCURRENCY dimension had following entries
ID REPORTING CURRENCY_TYPE
USD Y R
EUR Y R
LC L
Also my Currency Conversion data package selection is as follows:
P_CC: ALL
CATEGORY: ACTUAL
RPTCURRENCY: ALL
TIME: 2008.JAN
Following is the error
RUN_LOGIC:Member "LC" not exist
Failed
Application: PLANNING Package status: ERROR
Please help.
Thanks,
Diksha.Hi All,
My LGX files is as follow
*RUN_PROGRAM CURR_CONVERSION
SELECT(,[ID],RptCurrency,[CURRENCY_TYPE]='R' )
CATEGORY =
TID_RA =
RATEENTITY = GLOBAL
CURRENCY =
OTHER = [ENTITY=]
*ENDRUN_PROGRAM
If I am not wrong it should have substituted vales for variable %RptCurrency_SET% to USD and EUR.
Please let me know.
Diksha.
Edited by: Diksha Chopra on Dec 22, 2010 5:27 AM -
CONVERT_TO_LOCAL_CURRENCY currency conversion errors in Delta mode
Hello,
I have been working with SAP via customer messages for a month now with no resolution. As many of you have experienced, the SAP Level 1 support is pretty useless so I would like to check here to see if I can get some help.
I found a thread where another user has had the exact same problem as I have.
Problem: Exchange rate in Update rules with DELTA mode
However, there was no answer given to him. So, if anyone can help, I appreciate it. Here's the problem:
When a record comes through 2LIS_13_VDITM (for example), it had a document currency of EUR, a local currency of PLN and a statistical currency of USD. The first time the record comes through, it comes through just fine. The exchange rate from EUR to PLN is 3.533. The statistical currency value is calculated by taking the document currency value and multiplying it by the exchange rate from EUR to PLN to get the local currency. Then, this local currency is converted to USD by multiplying itself by the PLN to USD exchange rate of 1.519.
These are the exchange rates that are coming through as key figures on the transaction data. The problem is when a delta occurs. The data goes into the ODS and then once the update rules to the cube get it, the signs are backwards on the exchange rates. This makes sense so that the exchange rate key figures will cancel themselves out, but the SAP code says to calculate the local currency, it must first take the document currency and divide by the exchange rate. It should still be multiplying because the exchange rate from EUR to PLN is still 3.533. The negative on the key figure that is being zeroed out tells the code to divide though.
You cannot simply set the reversal indicator because the values that do come through ok would then be erraneous as the previous poster who had the same issue encountered. This is really causing some bad data for us. This is SAP delivered code. Any help would be appreciated.
Thanks,
Brenthi,
chk out various application currency conversion links
Need Urgent Help on Currency Conversion Routine
Currency conversion using transformation rule
http://help.sap.com/saphelp_nw04/helpdata/en/bc/058f4073b2f30ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/16/088f4073b2f30ee10000000a155106/frameset.htm
Ramesh
Maybe you are looking for
-
Regarding syntax error while updating from 4.6b to ECC 6.0
hello Experts, I'm presently working in upgrade project, Here it shows an error for one of the form pasted below. FORM MAKEPRINT USING TXT. DATA: BEGIN OF CVT_TABLE, X0(1) TYPE X VALUE 0, C0(1) VALUE '#', X1(1) TYPE X VALUE '7
-
Ipod 5th gen user considering a new iphone, imessage question.
Hello all, I currently have a ipod touch 5th generation, I use the imessage feature a lot to keep in touch with friends all over the world so it does not cost me on my regular cell plan. Now my quetsion is , if I get the new iphone, I don't
-
Some of your Quick time is out of date. You can fix this problem by updatin
I am running Windows XP SP2 with V 7.1.3 of Quicktime. Every time I lauch QT, I get the error message: "Some of your Quick time is out of date. You can fix this problem by updating to the latest version." I have gone onto Apple's web site and got the
-
How to set the timezone in a DATE datetype?
How to set the timezone in a DATE datetype? Thanks Maximus
-
Automatic import Admins of edir group?
HI @all, for remote control i have made a role and a zcm admin group. the admin group is assigned to a edir group an all members are imported as zcm admins and can control the workstations. when i put new members to the edir group, i can see them als