Error in Data loading - The source of the fiscal year variant has changed

Hi All,
Need your kind suggestions to solve the issue.
I am trying gto load data from one cube to another. the base cube has data with 0CALDAY. in the next cube I am trying to derive 0FISCPER from 0CALDAY. But while loading I am getting this error.
The source of the fiscal year variant has changed
Could someone guide me.
Thanks in advance.

Hi Saugata,
nice to exchange views after a long time.
well, if u are sending data to the target cube which contains data for the separate financial entity of different finacial parameters like fiscal varient then u need to update global transfer settings, and then load data.
parhaps u also need to check the value of the Fiscal year varient to the target cube.
hope this helps.

Similar Messages

Data load : The source of the fiscal year variant has changed

I am loading some sales data from BW to APO and I keep getting this message .
The source of the fiscal year variant has changed
I am not sure how to resolve it because the help also does not give much info on the solution.
Thanks

Hi
it may be becoz
In R3 the Fiscal year variat has been changed .. Check the Fiscal year variant for ur precious data..and talk to ur functional team abt variant...
Normally for a comapny Fiscal year variant will be unique. I will change when there are some huge changes happend Merger,acqucsition etc..
hope it helps
regards
AK

Error in the source system for fiscal year variant K4 Period 00

We are experiencing the following issue when loading data from module Flexible real estate RE-FX CASHFLOW CUBE OREFX_C06 Error in source system Fiscal year variant K4 is not defined for the period 00.

Hi,
You need to check in your source whether you have maintained Fiscal Yr Variant or not? Talk to you Functional person before you do the BI Extraction.
In Table T009B
You can check Fields
MANDAT - client
PERIV - Fiscal Year Variant
BDATJ - Posting date YYYY
BUMON - Posting date calendar month
Check Table T009B and see if you fiscal variant is maintained for all periods of Years (as per error its not). maintain the same in Source system and transfer Global settings in BW to copy the same into BW system.
@AK

How to capture the data if i am using two Fiscal year variant

Hi
My client is required need two type financial statement one is as per company act and calender year. Other one is company act and fiscal year.
regarding we have maintain two fiscal year variant one is assigned to company code as per calender yr other one is assigned to Spl.Pr G/L. but how to capture the financial data from company code in case we are using two fiscal yr variant.
Rekha

Hi
U cannot maintain two two fiscal year varaint for a company code in GL. As said by u maintain one fiscal year varaint for GL and the other one for FI SL. When u post FI document in GL automatically the same will flow into FI SL for the corressponding period.
For example ur Fiscal year varant is April to March in GL
and Callendar year in FI SL and u do a posting in April 1 (period 1) in GL then it post it to 4th period in FI SL automatically since April is the 4th period in FI SL since it uses K4 as the fiscal year variant.

Dynamic date in the selection according to fiscal year variant

Hi
Is it possible to set dynamic date input parameter from the fiscal year variant sap table (OB29 transaction).
For example when I run valuation (F.05) I want the value date input field to be the last day of the previous period.
Thanks
Ofer

Hi,
The dynamic dates on the selection parameters may come from the variant.
You need to create the variants accordingly to your requirements and specify how the date on the selection screen has to be calculated.
You have different options for this purpose.
T T: Table Variable from TVARVC
D D: Dynamic date calculation

Errors during Data loads

Hi,
Our end users are preparing their scripts for UAT and I have been asked to provide a list of data errors which they might need to test during UAT.
Can someone please help me in this. This is very urgent!!!
Thanks,
RPK.
Message was edited by:
RPK

HI,
1.No IDocs could be sent to the SAP BW using RFC.
2.IDocs were found in the ALE inbox for Source System that are not
Updated. Processing is overdue
5.1st That it is a PC File Source System.
2nd - That there are Duplicate Data Records leading to error.
7.1st That it is a PC File Source System.
2nd For uploading data from the PC File it seems that the file was not kept at the application server & the job was scheduled in Background
8.The background processing was not finished in the source system.
It is possible that the background processing in the source system was terminated.System response .There are incomplete data packets present
9.After looking at all the above error messages we find that if we want to load data with the delta update you must first initialize the delta process.
10.Here we can see that the Activation of ODS has failed as the Request Status in the ODS may not be green.
13.While Fiscal year is mostly the financial year and varies depending upon the Client using which Fiscal year Variant. Client may consider April is the start month of year (financial) .So this can be achieved by defining the fiscal year.One client can have different fiscal year definations with different Fiscal varients.So Fiscal variants differ the starting and ending of fiscal year.
For example in India we follow Fiscal year from April to March. You can have a look at the Fiscal year Variant and the periods in transaction OB29
14.Due to space problem these types of errors occurs

Error: "posting period is not defined for fiscal year variant" in FBICS3

Hi,
I got error "posting period is not defined for fiscal year variant" when I execute t code FBICS3.
I checked in OB29 & t code FBIC010 & noted that the fiscal year variant had ben maintained.
Please advice.

HI,
It was noted that the mentioned t code had been maintain but below mentioned error appear:
Posting period is not defined for fiscal year variant
Message no. GU506
Diagnosis
You have tried to determine a posting date in fiscal year variant for period , fiscal year , but this period is not defined for the variant.
Procedure
You maintain fiscal year variants in table T009.
It was referring to t code OB29. I have checked the detail, in OB29 also details maintain.
Please advice why the error still prompt.

Wrong Period end date set in Fiscal year variant

Hi all,
Can anyone please advise any solutions for my case? Thank you very much in advance.
In my system, a 5-4-4 fiscal year variant has been set. However, the period end date is incorrect.
For example, period 1 end date should be 5th Apr but saved with 6th Apr,
period 2 end date should be 3rd May but saved with 4th May.
The Asset planned depreciation has been posted in 6th Apr and 4th May.
I found I cannot revise the fiscal year variant. Please advise if I need to create a new Fiscal Year Variant If I need to adjust it? Thanks again.
Best Regards,
Gary

Hi David,
this thread had been posted twice.
Regards, Franz

How can we get the source of the page which is loaded on the browser using

Dear Sir,
How can we get the source of the page which is loaded on the browser using javascript
What is the exact path to get the source object in JS?
thanks & regards,
Sudheesh - INDIA

um... the document object?

Error while data loading

Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 4000317440                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500352                                 *
ztta/roll_extension........... 3001024512                              *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
Mayank

Hi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM

Common errors in Data Loading

Can anybody tell me what are the common error we come across in BW/BI for following:-
1] Data Loading in Infocube/ODS/DSO
2] Aggregates
3] PSA
4] DTP
5] Transformations
Thanks in advance

Hi,
Here are the list of common issues we face while data loading in to BW:
Data Loading in Infocube/ODS/DSO:
1) Missing SID issue or missing master data
2) Data load cancelled becasue of various exceptions. Eg: Message Type 'x', DBIF SQL Error,
3) Data records found in duplicate
4) Alpha Confirming Vaue error
5) Invalid time interval
6) Time overlap error
7) Job Cancelled in source system
8) RFC Connection Error
9) Data Source Replication error
10) Data load locked by active change run
11) Attributes to target by user 'xyz'
12) Job cancelled as the previous load is still running
13) Target locked by a change run
(Some times data loads dont fail but run for long time then usual with out any progess, because of struck tRFCs in source sytem, source sytem performance is poor and the job is in release state for long time, etc...)
Aggregate Rollups:
1) Nofilled aaggregates available, rollup not possible
2) Rollup locked by active change run
3) Job cancelled because of various exceptions
PSA Updations:
1) Job cancelled because of various exception
2) Missing SID value
ODS Activaitons:
1) Request to be activate shoud be green - (Loading of data in to ODS in still going on)
2) Key exists in duplicate
3) Job cancelled because of various exceptions (Short Dumps)
Attribue Change Run:
1) Locked by a rollup
2) Job cancelled because of various exceptions
3) Locked by another change run
Hope it helps....
Cheers,
Habeeb

Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)

Hi
We are using 10.1.3.6, and got the following error for just one of the thousands of transactions last night.
cannot end dataload. Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)
The data seems to have loaded, regardless of the error. Should we be concerned, and does this suggest something is not right somewhere?
Your assistance is appreciated.
Cheers

Hi John
Not using a load rule.
There were two other records which rejected based on absentee members. The error message was different for them, and easily fixed.
But this error doesn't tell us much. I will monitor the next run to see if the problem persists.
Thanks

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

How to see the source of the views - SPK

Generally view source can be feteched by the data dictionary user_views in which the field 'TEXT' is used to pop up the source of the query.
1) how could we see the entire query of the source from the field 'TEXT' as the data type of the field is 'LONG', So we can get only portion of the query.?
Please suggest a way to see the entire source of the view from the field 'TEXT'

SQL> set long 100000

Error in Data loading - The source of the fiscal year variant has changed

Similar Messages

Maybe you are looking for