Error in exporting report

Report Builder 6.0.8.8.3
I get the REP-0999 Unimplemented error when i try to Export a file into any format from the File->Generate to File option during Runtime. But the same works from the Design time. any help pls
Regards

hello,
6.0.8.8.3 is the base release of 6i w/o any patches if i am not mistaken and is over 3 years old. i would strongly suggest you apply the latest patch. it is most likely that your problem has been fixed by one of the patch sets.
regards,
philipp

Similar Messages

Error while Exporting report

hi,
i get an error when exporting my report. below is the stacktrace of it. please help me to sort it out.
This happens only when i export the report as editable word...
JRCAgent21 detected an exception: java.lang.NullPointerException
 at com.crystaldecisions.reports.formatter.formatter.e.m.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.do(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.do(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ak.do(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.e.p.aB(Unknown Source)
 at com.businessobjects.reports.sdk.b.b.byte(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source)
 at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
 at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
 at com.crystaldecisions.report.web.event.av.a(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
 at com.dnb.asip.report.viewer.ReportViewerTag.doEndTag(ReportViewerTag.java:92)
 at org.apache.jsp.Reports.JSP.VIPReport_jsp._jspService(VIPReport_jsp.java:251)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
 at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
 at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
 at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
 at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
 at java.lang.Thread.run(Thread.java:534)
regards,
prem

To find out what version of Eclipse you have, open the .eclipseproduct file.
To find out what version of the JRC you are on, you can look at the <eclipse home>\plugins\com.businessobjects.sdks.jrc.11.8.x to see what your latest version is.
This stack trace on it's own doesn't indicate why you are having a problem. It could be a problem with something in the report.... or it could be something wrong in the code. To ensure your code is correct, you should verify it against the sample code in the Developer Library and the JRC sample downloads.
Does the file get exported even though you have the error or is there no file or a zero byte file?

IllegalArgumentException error while exporting report in PDF format

Hi all,
we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
Below the error occurred:
12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
12:39:16,875 ERROR PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
java.lang.IllegalArgumentException
 at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
 at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
 at com.crystaldecisions.reports.a.e.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
 at com.crystaldecisions.report.web.event.br.a(Unknown Source)
 at com.crystaldecisions.report.web.event.w.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
 at com.crystaldecisions.report.web.event.av.a(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
 at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
12:39:16,875 INFO [c] Disk Exporter: finalizing export to destination
12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
 at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
 at com.crystaldecisions.reports.a.e.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
 at com.crystaldecisions.report.web.event.br.a(Unknown Source)
 at com.crystaldecisions.report.web.event.w.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
 at com.crystaldecisions.report.web.event.av.a(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
 at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
Caused by: java.lang.IllegalArgumentException
 at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
 ... 56 more
Have an idea?
Thanks

Hello Andrea.
I searched through the SAP Notes for the error that you are encountering. There is an SAP Note that exists titled the following:
1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
=============================================
Symptom
Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
Environment
Windows 2003
Apache Tomcat 5.0
Crystal Reports for Eclipse version 1.x
Reproducing the Issue
Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
Note: This does not occur if this option is enabled in a subreport.
Cause
When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
Resolution
Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website.
http://www.sdn.sap.com/irj/boc/crystalreports-java
=============================================
Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
I hope that this helps.
Regards.
- Robert

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

Exception_Access_Violation error while exporting report to excel

Hello Experts,
We have BO 6.5 report designer. We have few reports developed on BO 6.5. While exporting these reports to excel an error occurs with below error message:
Unhandled exception
Code: C0000005
Description : Exception_Acess_Violation
It seems this is a common error comes in various sitions but I could not find the exact solution to this issue.
Please help me with this.
Regards,
Nirav Shah

Hi Denis,
The issue was not present earlier. We were successfully able to export reports in excel sheet.
In case if compitability is the issue, Can you please tell me how can we fix it?
Regards,
Nirav Shah

RrRenderingError - Error while exporting report to PDF

Hi,
I am getting an error while exporting SSRS 2000 report to PDF. The error message is as shown below. This is report actually by sales rep and it is working fine with all the sales rep but when i try with one sales rep i get this error.
Error
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Object reference not set to an instance of an object.
Please somebody help me out.
Thanks
Cheers
Gigi
cheri

Cherian K,
A message that indicates that the object reference is not set to an instance of the object is typically caused by one or more of the following reasons:
There are soft page breaks within empty lists in the report.
There are hidden groups within the report and you tried to export it to PDF.
The report has a link to a subreport that is not published on the report server and you tried to export it to CSV.
There are text boxes with a width and/or height of zero in the report.
A text box is either hidden or the NoRows property is set to true.
A text box spans table cells where some cells have a collection of null values.
The report has static columns and/or rows and, in the Visibility properties, Hidden is set to true.
The report has static columns and/or rows and there are grand totals in the report.
The report has static column headings and, in the Visibility properties, Hidden is set to true.
The matrix report has multiple columns and rows and, in the Visibility properties, Hidden is set to true and
you tried to export to PDF or TIFF.
Regards
Shiv

Error while exporting Report by Command Line.

Hi,
When I tried exporting few objects in BI Publisher from command line, I got follwoing message, whithout file being transfered: Any pointers?
BIPublisher error:
[export] Connect to http://ServerName:9704/xmlpserver/ using weblogic
[export] Export E:\OBIEE11g_Middleware_Home\instances\instance1\bifoundationOracleBIPresentationServicesComponent\coreapplication_obips1\catalog\Oneview-R to E:\OBIEE11g_Middleware_Home\Oracle_BI1\clients\bipublisher\BIPCatalogUtil\bin\Oneview-Rz
Command Error: export->exportObject
oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::executeDownloadReport Failure: Unable to download Report for [E:\OBIEE11g_Midd
leware_Home\instances\instance1\bifoundationOracleBIPresentationServicesComponen
t\coreapplication_obips1\catalog\Oneview-R] Due to unable to find ReportObject
Done.
The system cannot find the path specified.
Regards,
Jitendra

To find out what version of Eclipse you have, open the .eclipseproduct file.
To find out what version of the JRC you are on, you can look at the <eclipse home>\plugins\com.businessobjects.sdks.jrc.11.8.x to see what your latest version is.
This stack trace on it's own doesn't indicate why you are having a problem. It could be a problem with something in the report.... or it could be something wrong in the code. To ensure your code is correct, you should verify it against the sample code in the Developer Library and the JRC sample downloads.
Does the file get exported even though you have the error or is there no file or a zero byte file?

"Memory full." error while exporting report to PDF format - CR2008SP2

 
Hello, 
 
I am developing a C#.NET application that uses the CR2008 SP2 .NET libraries. This application performs some database updates and uses CR2008 SP2 to run 7 different reports and export the results to PDF files. This application is a console application that only uses Crystal to export the rendered reports - it does not use previews or printing. 
 
The specific pattern of this application is as follows: 
 
- perform some database updates 
- render report #1 and export it as a PDF file 
- perform some database updates 
- render report #2 and export it as a PDF file 
... pattern repeats to report #7 ... 
 
This application works fine as long as I run only one instance of it at a time. The problem occurs when I try to run multiple instances of this application at the same time. When I run multiple instances of this application at the same time (against totally different databases) each instance will start up happily and begin running through the process described above. After a few moments one or more instances will fail during the report export. The specific error is as follows: 
 
"Memory full. Failed to export the report. Not enough memory for operation." 
 
The error always comes from the call to: 
 
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(Format, FileName) 
 
I have watched the memory consumption of these instances of my application while they are running. They never seem to exceed approximately 52MB each. At this time task manager reports over 1GB of physical memory free. These numbers lead me to believe that memory is not actually "full". 
 
Here are some specifics about the environment: 
 
Dell Vostro 1720 / P8600 / 4GB 
Windows 7 Ultimate x64 
SQL Server 2008 SP1 x64 
Crystal Reports 2008 SP2 
 
Specifics about the C# application: 
 
IDE: Visual Studio 2008 SP1 
Type: Console Application 
Target platform: x86 
.NET Framework: 3.5 SP1 
Crystal References: 
- CrystalDecisions.CrystalReports.Engine (v12.0.2000.0) 
- CrystalDecisions.Shared (v12.0.2000.0) 
 
Specifics about the report templates: 
 
The report templates are RPT files saved from CR2008 SP2. They are relatively simple. A few of them (maybe 3) contain a single subreport. 
 
Specifics about the database: 
 
Each database is approximately 1GB in size. The database contains many tables but the reports only access a handful of tables. Each table that the reports access have maybe a few hundred rows tops. Most have less than 100. Likewise, when the reports perform their selections the resulting rowset for the reports is anywhere from about 20 records to a few hundred records tops. 
 
A few items to note: 
 
- Multiple instances of my application need to be able to run on a single machine at the same time. It is a specific design requirement. 
- My application works fine as long as I run only one instance of it at a time. 
- My application works fine when I run multiple instances if I comment out the Crystal part of it. 
- My application works fine when I run multiple instances if I change the export format from PDF to HTML32 or HTML40 (have not tried any others) 
- The machine has over 1GB of physical memory free when this error occurs. 
- I have taken steps to ensure that I am properly disposing of my CrystalDecisions.CrystalReports.Engine.ReportDocument instance just after each export is complete. I have tried to use the "using" keyword, as well as explicitly setting the instance to null and calling the .NET framework garbage collector. This did not seem to help. 
 
Any assistance with this issue would be greatly appreciated. 
 
Steve 
 
Edited by: scbraddy on Mar 11, 2010 1:53 AM

 
Jonathan & Ludek, 
 
Thanks for the timely response and good suggestions guys! 
 
I have performed a few more tests today in order to help answer some of your questions. 
 
Below are my responses. Some of them are answers to questions and some of them are observations based on tests I have performed today. 
 
- The database system is SQL Server 2008 SP1 Developer Edition x64. 
 
- The C# application connects to the database using the native .NET SQL client (System.Data.Sql). 
 
- During runtime I connect the report to the database by looping through the ReportDocument.Database.Tables collection. For each Table found I create a CrystalDecisions.Shared.TableLogOnInfo instance, fill in the table name, server name, database name, user ID, and password, and use Table.ApplyLogOnInfo() to apply it. I do the same thing for the subreports collection if there are any. Like I said, about half of the reports contain a single subreport. 
 
- The report templates are currently set to use the "SQLOLEDB" Provider. The Database Type is set to "OLE DB (ADO)". I am not entirely sure what you mean by trying a different database driver. I assume you mean to change the provider? If so, given the fact that we are using SQL Server 2008, what would I change it to? 
 
- If I do not perform the database updates during application runtime (instead, perform them ahead of time and then allow the application to only render the reports) then I still have the same problem. Nothing changes. 
 
- I installed the Fix Pack 2.5, rebooted, and tried again. Same problem. 
 
- I do not beleive that I am using XML transforms. How would I know? 
 
- Regarding fragmented memory: It is hard for me to believe that, given the amount of memory free on the machine once all processes are up and running (1GB+), and the size of the processes (~50MB), that a contiguous block could not be found. Maybe there is some Crystal process that is attempting to balloon out of control, but as far as I can tell my application is not getting very big. I will not rule this out of course because I don't know for sure. 
 
- Regarding killing the process once a report is rendered: The problem with this is that the application needs to perform these 7 groups of updates and render these 7 reports in a specific sequence all as part of one complete "pass". Also, this application needs to be able to be able to handle a scneario where one or more instance of the application is started on a single machine at roughly the same time (pointed at different databases). The application actually does work fine in this regard (staying well within the capabilities of my 4GB laptop even when 8 of them are running) except that I always get the same error when I choose PDF as my export format. 
 
- I ran a test today where I changed the export format to HTML40 and started 8 instances of the application at the same time, each working from a different copy of the database. The instances ran a little slow but did complete in good time with no errors. Please note that changing the export format to PDF will cause the application to fail with the "memory full" error if even only 2 instances are running at the same time. The only way I can successfully complete a run with the export format set to PDF is to run only 1 instance at a time. I can run it over and over all day long and it will not fail, as long as only 1 instance is running at a given time. As of yesterday I had only proven that the application would complete when using the HTML40 export format when 2 or 4 instances are running, but today I doubled it again (to 8) and still no failure while using HTML40. This is possibly the most interesting fact about this problem, and is another reason why I am skeptical that memory fragmentation is the culprit. 
 
We would like to solve this problem because we would like to continue to target the PDF format. It is the standard report export format for our applications. If we cannot solve this problem we may call a meeting and decide whether to proceed with the HTML40 export format, or possibly dump Crystal from this project altogether. 
 
Thanks again for your interest in our problem and your timely and helpful responses. I'm really not sure where to go next ... maybe change the database provider in the templates? I will need some specific advice in this area because I'm not sure what to do. Any more ideas you guys have will be greatly appreciated on this end! 
 
Steve 
 
Edited by: scbraddy on Mar 12, 2010 2:18 AM

Error in exporting REPORT image or HTML

I have been receiving an error recently while trying to export a REPORT into an image format or HTML. I receive this error:
"Cannot open clipboard. (Error code 0)"
Has anyone received this error before? I have been able to export images and HTML files before, and I am not sure what I have done to change my system.
Thank you,
Julia

Hi,
I think I found the problem. I have been experiencing clipboard problems lately with Microsoft Office products. It appeared as though my clipboard would stop working after I would do a lot of copying and pasting. Rebooting my computer fixed the problem. After searching for help, it seems that my problem involves connecting remotely to a Windows 2003 server, which I do often. If the connection is open, copying and pasting sometimes does not work on my computer. It appears I am having a similar problem with DIAdem. If I am remotely connected to a server, I cannot export images. When I disconnect, everything works. I thought that was a really strange problem, but maybe if anyone else has the problem, this might help.
Julia

Fatal Error when exporting Report to Excel

Hi Everyone, I've been trying to export my report to excel. But I have exhausted all possible reasons and I just couldn't figure it out. Can someone please help me. Thanks in advance.
PROGRAM NAME : ZADC_PAYSUMNEW
REPORT ZADC_PAYSUMNEW
NO STANDARD PAGE HEADING
 LINE-SIZE 450
 LINE-COUNT 65 MESSAGE-ID zmes.
TABLE DECLARATION *
TABLES: cskt,
 csks,
 pa0009,
 pcl1,
 pcl2,
 pernr,
 t512t,
 t549a,
 t527x,
 zhrprtype.
 INFOTYPES DECLARATION
INFOTYPES: 0001, 0002.
 INCLUDE DECLARATION
INCLUDE: rpc2rx00.
INCLUDE: rpc2rxx0.
INCLUDE: rpppxd00.
 INTERNAL TABLE DECLARATION
DATA: BEGIN OF itab OCCURS 0,
 khinr LIKE csks-khinr,
 kostl LIKE p0001-kostl,
 ltext(40),
 p_date LIKE pc261-inper,
 basic(7) TYPE p DECIMALS 2,
 pera(7) TYPE p DECIMALS 2,
 longp(7) TYPE p DECIMALS 2,
 trall(6) type p decimals 2,
 srvaw(6) TYPE p DECIMALS 2,
 chall(7) TYPE p DECIMALS 2,
 leave(7) TYPE p DECIMALS 2,
 meal(7) TYPE p DECIMALS 2,
 saldf(7) TYPE p DECIMALS 2,
 sipps(7) TYPE p DECIMALS 2,
 sipgs(7) TYPE p DECIMALS 2,
 subs(7) TYPE p DECIMALS 2,
 hzard(7) TYPE p DECIMALS 2,
 lallw(7) TYPE p DECIMALS 2,
 medps(7) TYPE p DECIMALS 2,
 medgs(7) TYPE p DECIMALS 2,
 pcontps(7) TYPE p DECIMALS 2,
 pcontgs(7) TYPE p DECIMALS 2,
 pagibps(6) TYPE p DECIMALS 2,
 pagibgs(6) TYPE p DECIMALS 2,
 lwop(7) TYPE p DECIMALS 2,
 npay(7) TYPE p DECIMALS 2,
 otime(7) TYPE p DECIMALS 2,
 ec(7) TYPE p DECIMALS 2,
 fr_date like sy-datum,
 to_date like sy-datum,
 END OF itab.
DATA: BEGIN OF jtab OCCURS 0,
 khinr LIKE csks-khinr,
 kostl LIKE p0001-kostl,
 ltext(40),
 basic(7) TYPE p DECIMALS 2,
 pera(7) TYPE p DECIMALS 2,
 longp(7) TYPE p DECIMALS 2,
 trall(6) type p decimals 2,
 srvaw(6) TYPE p DECIMALS 2,
 chall(7) TYPE p DECIMALS 2,
 leave(7) TYPE p DECIMALS 2,
 meal(7) TYPE p DECIMALS 2,
 saldf(7) TYPE p DECIMALS 2,
 sipps(7) TYPE p DECIMALS 2,
 sipgs(7) TYPE p DECIMALS 2,
 subs(7) TYPE p DECIMALS 2,
 hzard(7) TYPE p DECIMALS 2,
 lallw(7) TYPE p DECIMALS 2,
 medps(7) TYPE p DECIMALS 2,
 medgs(7) TYPE p DECIMALS 2,
 pcontps(7) TYPE p DECIMALS 2,
 pcontgs(7) TYPE p DECIMALS 2,
 pagibps(6) TYPE p DECIMALS 2,
 pagibgs(6) TYPE p DECIMALS 2,
 lwop(7) TYPE p DECIMALS 2,
 npay(7) TYPE p DECIMALS 2,
 otime(7) TYPE p DECIMALS 2,
 ec(7) TYPE p DECIMALS 2,
 END OF jtab.
DATA: it_list TYPE STANDARD TABLE OF itab WITH HEADER LINE.
 CONSTANTS DECLARATION
CONSTANTS: basic TYPE pc207-lgart VALUE '0401',
 basic2 TYPE pc207-lgart VALUE '0402',
 basic3 TYPE pc207-lgart VALUE '0403',
 PERA TYPE pc207-lgart VALUE '3104',
 PERA2 TYPE pc207-lgart VALUE '3110',
 longp TYPE pc207-lgart VALUE '1601',
 longp2 TYPE pc207-lgart VALUE '1603',
 trall TYPE pc207-lgart VALUE '3109',
 srvaw TYPE pc207-lgart VALUE '2117',
 leave TYPE pc207-lgart VALUE '2118',
 chall TYPE pc207-lgart VALUE '3105',
 chall2 TYPE pc207-lgart VALUE '3111',
 chall3 TYPE pc207-lgart VALUE '3112',
 meal TYPE pc207-lgart VALUE '3102',
 saldf TYPE pc207-lgart VALUE '4103',
 sipps TYPE pc207-lgart VALUE '/090',
 sipps2 TYPE pc207-lgart VALUE '1121',
 subs TYPE pc207-lgart VALUE '3101',
 hzard TYPE pc207-lgart VALUE '1602',
 lallw TYPE pc207-lgart VALUE '3103',
 medps TYPE pc207-lgart VALUE '/313',
 medgs TYPE pc207-lgart VALUE '/314',
 pcontps TYPE pc207-lgart VALUE '/093',
 pcontps2 TYPE pc207-lgart VALUE '1327',
 pcontps3 TYPE pc207-lgart VALUE '1120',
 pagibps TYPE pc207-lgart VALUE '/326',
 pagibps2 TYPE pc207-lgart VALUE '1326',
 lwop TYPE pc207-lgart VALUE '1102',
 otime TYPE pc207-lgart VALUE '0101',
 otime2 TYPE pc207-lgart VALUE '0102',
 otime3 TYPE pc207-lgart VALUE '0103',
 otime4 TYPE pc207-lgart VALUE '0104',
 npay TYPE pc207-lgart VALUE '/559'.
 DATA DECLARATION
DATA: BEGIN OF COMMON PART buffer.
INCLUDE: rpppxd10.
DATA: END OF COMMON PART buffer.
*Table data containing directory to PCL2 payroll results file DATA:
DATA: BEGIN OF rgdir OCCURS 100.
 INCLUDE STRUCTURE pc261.
DATA: END OF rgdir.
DATA: BEGIN OF evpdir OCCURS 100.
 INCLUDE STRUCTURE pc261.
DATA: END OF evpdir.
DATA: country LIKE t001p-molga,
 lname LIKE t527x-orgtx,
 filename2(128),
 p_date LIKE pc261-inper,
 w_basic LIKE pc207-lgart,
 w_basic2 LIKE pc207-lgart,
 w_basic3 LIKE pc207-lgart,
 w_pera LIKE pc207-lgart,
 w_pera2 LIKE pc207-lgart,
 w_longp LIKE pc207-lgart,
 w_longp2 LIKE pc207-lgart,
 w_trall LIKE pc207-lgart,
 w_srvaw LIKE pc207-lgart,
 w_leave LIKE pc207-lgart,
 w_chall LIKE pc207-lgart,
 w_chall2 LIKE pc207-lgart,
 w_chall3 LIKE pc207-lgart,
 w_meal LIKE pc207-lgart,
 w_saldf LIKE pc207-lgart,
 w_sipps LIKE pc207-lgart,
 w_sipps2 LIKE pc207-lgart,
 w_subs LIKE pc207-lgart,
 w_hzard LIKE pc207-lgart,
 w_lallw LIKE pc207-lgart,
 w_medps LIKE pc207-lgart,
 w_medgs LIKE pc207-lgart,
 w_pcontps LIKE pc207-lgart,
 w_pcontps2 LIKE pc207-lgart,
 w_pcontps3 LIKE pc207-lgart,
 w_pagibps LIKE pc207-lgart,
 w_pagibps2 LIKE pc207-lgart,
 w_lwop LIKE pc207-lgart,
 w_otime LIKE pc207-lgart,
 w_otime2 LIKE pc207-lgart,
 w_otime3 LIKE pc207-lgart,
 w_otime4 LIKE pc207-lgart,
 w_npay LIKE pc207-lgart,
 tempgs(7) TYPE p DECIMALS 2,
 ctr-basic(7) TYPE p DECIMALS 2,
 ctr-pera(7) TYPE p DECIMALS 2,
 ctr-longp(7) TYPE p DECIMALS 2,
 ctr-trall(6) TYPE p DECIMALS 2,
 ctr-srvaw(6) TYPE p DECIMALS 2,
 ctr-leave(7) TYPE p DECIMALS 2,
 ctr-chall(7) TYPE p DECIMALS 2,
 ctr-meal(7) TYPE p DECIMALS 2,
 ctr-saldf(7) TYPE p DECIMALS 2,
 ctr-sipps(7) TYPE p DECIMALS 2,
 ctr-sipgs(7) TYPE p DECIMALS 2,
 ctr-subs(7) TYPE p DECIMALS 2,
 ctr-hzard(7) TYPE p DECIMALS 2,
 ctr-lallw(7) TYPE p DECIMALS 2,
 ctr-medps(7) TYPE p DECIMALS 2,
 ctr-medgs(7) TYPE p DECIMALS 2,
 ctr-pcontps(7) TYPE p DECIMALS 2,
 ctr-pcontgs(7) TYPE p DECIMALS 2,
 ctr-pagibps(6) TYPE p DECIMALS 2,
 ctr-pagibgs(6) TYPE p DECIMALS 2,
 ctr-lwop(7) TYPE p DECIMALS 2,
 ctr-otime(7) TYPE p DECIMALS 2,
 ctr-npay(7) TYPE p DECIMALS 2,
 ctr-ec(7) TYPE p DECIMALS 2.
DATA: BEGIN OF ph-version.
 INCLUDE STRUCTURE pc201_pay. "XTWPH9K008656
DATA: END OF ph-version.
DATA: fr_date LIKE sy-datum,
 to_date LIKE sy-datum.
 SELECT-OPTIONS and PARAMETERS
SELECT-OPTIONS: p_status FOR rgdir-srtza DEFAULT 'A'.
DATA: DATE1(15),
 mon(9).
 DEFINITION
DEFINE rp-imp-c2-rx2.
clear:
 orx-version, "OBJECTS_FOR_CLEAR
 rt, rt[].
import
 ph-version to orx-version "OBJECTS_FOR_IMPORT
 rt
from database pcl2(ph) id rx-key using pcl2_exp_imp.
rp-imp-rx-subrc = sy-subrc.
if sy-subrc eq 0 and orx-version-number ne ph-version-number.
 rp-imp-rx-subrc = 8.
endif.
END-OF-DEFINITION.
TYPE-POOLS: slis.
DATA: g_repid LIKE sy-repid,
 gt_fieldcat TYPE slis_t_fieldcat_alv,
 gt_events TYPE slis_t_event,
 gt_top TYPE slis_t_listheader,
 gt_eol TYPE slis_t_listheader,
 gt_list_top_of_page TYPE slis_t_listheader,
 gt_list_end_of_list TYPE slis_t_listheader,
 gs_layout TYPE slis_layout_alv,
 d_f2code LIKE sy-ucomm VALUE '&ETA'.
CONSTANTS: fn_top TYPE slis_formname VALUE 'TOP_OF_PAGE',
 fn_eol TYPE slis_formname VALUE 'END_OF_LIST'.
DATA: it_alv_out TYPE STANDARD TABLE OF itab WITH HEADER LINE.
INITIALIZATION.
g_repid = sy-repid.
PERFORM f_fieldcat_init USING gt_fieldcat[].
PERFORM eventtab_build USING gt_events[].
 START-OF-SELECTION.
START-OF-SELECTION.
fr_date = to_date = pn-endda.
fr_date+6(2) = '01'.
SELECT SINGLE * FROM t549a
 WHERE abkrs = pnpxabkr.
GET PERNR.
 CLEAR: itab, lname.
 PERFORM get_rt_tab.
END-OF-SELECTION.
PERFORM display_grid.
INCLUDE rpppxm00.
USING DATM
 FORM get_rt_tab *
FORM get_rt_tab.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
CALL FUNCTION 'CU_READ_RGDIR'
 EXPORTING
 persnr = p0001-pernr
 IMPORTING
 molga = country
 TABLES
 in_rgdir = rgdir
 EXCEPTIONS
 no_record_found = 1
 OTHERS = 2.
IF sy-subrc = 0.
SELECT single ltext FROM cskt
 INTO itab-ltext
 WHERE kostl = p0001-kostl
 AND datbi = '99991231'.
SELECT SINGLE * FROM csks
 WHERE kostl = p0001-kostl
 AND kokrs = 'GSIS'
 AND datbi = '99991231'.
IF sy-subrc = 0.
 MOVE: csks-kostl TO itab-kostl,
 csks-khinr TO itab-khinr.
ENDIF.
 p_date = pn-paper.
regular payroll run.
 CALL FUNCTION 'CD_EVALUATION_PERIODS'
 EXPORTING
 bonus_date = '00000000'
 inper_modif = t549a-permo
 inper = p_date
 pay_type = ' '
 pay_ident = ' '
 TABLES
 rgdir = rgdir
 evpdir = evpdir
 EXCEPTIONS
 no_record_found = 1
 OTHERS = 2.
 IF sy-subrc = 0.
 LOOP AT evpdir WHERE srtza IN p_status and FPPER eq pn-begda+(6).
 rx-key-pernr = p0001-pernr.
 rx-key-seqno = evpdir-seqnr.
 rp-imp-c2-rx2.
 IF rp-imp-rx-subrc = 0.
 PERFORM rt_to_itab.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
ENDFORM.
 FORM PRINT_RX *
FORM print_rx.
LOOP AT rt.
 PERFORM re512t USING country rt-lgart.
ENDLOOP.
ENDFORM.
 FORM RE512T *
--> VALUE(COUNTRY_GROUPING) *
--> VALUE(WTYPE) *
FORM re512t USING value(country_grouping)
 value(wtype).
CHECK t512t-sprsl NE sy-langu
 OR t512t-molga NE country_grouping
 OR t512t-lgart NE wtype.
SELECT SINGLE * FROM t512t
 WHERE sprsl EQ sy-langu
 AND molga EQ country_grouping
 AND lgart EQ wtype.
IF sy-subrc NE 0.
 CLEAR t512t.
ENDIF.
ENDFORM.
 FORM rt_to_itab *
FORM rt_to_itab.
MOVE: basic TO w_basic,
 basic2 TO w_basic2,
 basic3 TO w_basic3,
 pera TO w_pera,
 pera2 TO w_pera2,
 longp TO w_longp,
 longp2 TO w_longp2,
 srvaw TO w_srvaw,
 leave TO w_leave,
 trall TO w_trall,
 chall TO w_chall,
 chall2 TO w_chall2,
 chall3 TO w_chall3,
 meal TO w_meal,
 saldf TO w_saldf,
 sipps TO w_sipps,
 sipps2 TO w_sipps2,
 subs TO w_subs,
 hzard TO w_hzard,
 lallw TO w_lallw,
 medps TO w_medps,
 medgs TO w_medgs,
 pcontps TO w_pcontps,
 pcontps2 TO w_pcontps2,
 pcontps3 TO w_pcontps3,
 pagibps TO w_pagibps,
 pagibps2 TO w_pagibps2,
 LWOP TO w_lwop,
 otime TO w_otime,
 otime2 TO w_otime2,
 otime3 TO w_otime3,
 otime4 TO w_otime4,
 npay TO w_npay.
LOOP AT rt WHERE lgart = w_basic or lgart = w_basic2
 or lgart = w_basic3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-basic.
 itab-ec = rt-betrg / 100.
 if itab-ec > 100.
 itab-ec = 100.
 ENDIF.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pera.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pera.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pera2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pera.
ENDLOOP.
LOOP AT rt WHERE lgart = w_longp or lgart = w_longp2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-longp.
ENDLOOP.
LOOP AT rt WHERE lgart = w_trall.
 if rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 endif.
 ADD: rt-betrg TO itab-trall.
ENDLOOP.
LOOP AT rt WHERE lgart = w_srvaw.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-srvaw.
ENDLOOP.
LOOP AT rt WHERE lgart = w_leave.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-leave.
ENDLOOP.
LOOP AT rt WHERE lgart = w_chall or
 lgart = w_chall2 or
 lgart = w_chall3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-chall.
ENDLOOP.
LOOP AT rt WHERE lgart = w_meal.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-meal.
ENDLOOP.
LOOP AT rt WHERE lgart = w_saldf.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-saldf.
ENDLOOP.
LOOP AT rt WHERE lgart = w_sipps or
 lgart = w_sipps2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-sipps.
 itab-sipgs = itab-sipps / 9 * 12.
ENDLOOP.
LOOP AT rt WHERE lgart = w_subs.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-subs.
ENDLOOP.
LOOP AT rt WHERE lgart = w_hzard.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-hzard.
ENDLOOP.
LOOP AT rt WHERE lgart = w_lallw.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-lallw.
ENDLOOP.
LOOP AT rt WHERE lgart = w_medps.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-medps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_medgs.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 MOVE: rt-betrg TO tempgs.
 itab-medgs = itab-medps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pcontps OR
 lgart = w_pcontps2 OR
 lgart = w_pcontps3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pcontps.
ENDLOOP.
itab-pcontgs = itab-pcontps * 9.
LOOP AT rt WHERE lgart = w_pagibps OR
 lgart = w_pagibps2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pagibps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pagibps.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pagibgs.
ENDLOOP.
LOOP AT rt WHERE lgart = w_lwop.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-lwop.
ENDLOOP.
LOOP AT rt WHERE lgart = w_otime or
 lgart = w_otime2 or
 lgart = w_otime3 or
 lgart = w_otime4.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-otime.
ENDLOOP.
LOOP AT rt WHERE lgart = w_npay.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-npay.
ENDLOOP.
COLLECT itab.
CLEAR: itab.
REFRESH rt.
ENDFORM. " rt_to_itab
*& Form f_fieldcat_init
 text
 -->P_GT_FIELDCAT[] text
FORM f_fieldcat_init USING rt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-reptext_ddic = ' FXNAL Group'.
ls_fieldcat-fieldname = 'KHINR'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 12.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-reptext_ddic = ' OFFICE'.
ls_fieldcat-fieldname = 'LTEXT'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 40.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 3.
ls_fieldcat-reptext_ddic = ' RC #'.
ls_fieldcat-fieldname = 'KOSTL'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 5.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 4.
ls_fieldcat-reptext_ddic = 'Basic Salary'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'BASIC'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 5.
ls_fieldcat-reptext_ddic = 'PERA Allow'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'PERA'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 6.
ls_fieldcat-reptext_ddic = 'Longevity Pay'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LONGP'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 7.
ls_fieldcat-reptext_ddic = 'Service Award'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SRVAW'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 8.
ls_fieldcat-reptext_ddic = 'Child Allowance'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'CHALL'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 9.
ls_fieldcat-reptext_ddic = 'Leave Mone'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LEAVE'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 10.
ls_fieldcat-reptext_ddic = 'Over-time'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'OTIME'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 11.
ls_fieldcat-reptext_ddic = 'Meal Subsidy'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'MEAL'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 12.
ls_fieldcat-reptext_ddic = 'Salary Diff.'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SALDF'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 13.
ls_fieldcat-reptext_ddic = 'Subsistence'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SUBS'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 14.
ls_fieldcat-reptext_ddic = 'Hazard Pay'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'HZARD'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 15.
ls_fieldcat-reptext_ddic = 'Laundry Allow'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LALLW'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
ENDFORM. " f_fieldcat_init
*& Form display_grid
 text
--> p1 text
<-- p2 text
FORM display_grid.
SORT itab BY kostl khinr.
LOOP AT itab.
 AT NEW khinr.
 MOVE-CORRESPONDING itab TO jtab.
 APPEND jtab.
 ENDAT.
ENDLOOP.
PERFORM my_top USING gt_top[].
PERFORM build_layout USING gs_layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = g_repid
 is_layout = gs_layout
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 TABLES
 t_outtab = itab.
ENDFORM. " display_grid
*& Form eventtab_build
 text
 -->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING my_events TYPE SLIS_T_EVENT.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 1
 IMPORTING
 et_events = my_events.
*TOP OF PAGE
READ TABLE my_events
 WITH KEY NAME = slis_ev_top_of_page
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE fn_top TO ls_event-form.
 APPEND ls_event TO my_events.
ENDIF.
CLEAR ls_event.
*END OF LIST
READ TABLE my_events
 WITH KEY name = slis_ev_end_of_list
 INTO ls_event.
IF sy-subrc = 0.
 MOVE fn_eol TO ls_event-form.
 APPEND ls_event TO my_events.
ENDIF. " SY-SUBRC for READ TABLE
ENDFORM. " eventtab_build
*& Form top_comment
 text
 -->P_MYTOP[] text
FORM top_comment USING my_top_of_page TYPE slis_t_listheader.
DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
DATA: ls_line TYPE slis_listheader,
 li_recs TYPE i,
 lc_name(60) TYPE c,
 lc_from(30) TYPE c,
 lc_to(30) TYPE c.
CALL FUNCTION 'MONTH_NAMES_GET'
 TABLES
 month_names = it_t247.
Company Name
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = TEXT-001.
APPEND ls_line TO my_top_of_page.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-info = TEXT-002.
APPEND ls_line TO my_top_of_page.
Date
CLEAR lc_name.
CONCATENATE sy-datum+6(2) ',' INTO lc_name.
READ TABLE it_t247 WITH KEY mnr = sy-datum+4(2).
CONCATENATE text-003 it_t247-ltx lc_name sy-datum(4)
 INTO lc_name SEPARATED BY space.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO my_top_of_page.
ENDFORM. " top_comment
*& Form build_layout
 text
 -->P_GS_LAYOUT text
FORM build_layout USING my_layout TYPE slis_layout_alv.
my_layout-f2code = d_f2code.
my_layout-reprep = 'X'.
my_layout-confirmation_prompt = 'X'.
my_layout-flexible_key = 'X'.
ENDFORM. " build_layout
*& Form TOP_OF_PAGE
 Writes comments on top of page
FORM top_of_page.
DATA: ls_line TYPE slis_listheader,
 lc_name(60) TYPE c.
IF sy-ucomm = '&RNT_PREV'.
 READ TABLE gt_top INTO ls_line INDEX 2.
 lc_name = ls_line-info.
 WRITE 'Page:' TO lc_name+45(5).
 WRITE sy-pagno TO lc_name+52(5).
 ls_line-typ = 'H'.
 ls_line-info = lc_name.
 MODIFY gt_top FROM ls_line INDEX 2.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_top.
ENDFORM. " TOP_OF_PAGE
*& Form my_top
 text
 -->P_GT_TOP[] text
FORM my_top USING top TYPE slis_t_listheader.
DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
DATA: ls_line TYPE slis_listheader,
 li_recs TYPE i,
 lc_name(60) TYPE c,
 lc_from(30) TYPE c,
 lc_to(30) TYPE c.
CALL FUNCTION 'MONTH_NAMES_GET'
 TABLES
 month_names = it_t247.
Company Name
CLEAR lc_name.
WRITE text-001 TO lc_name.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
**Report Name
CLEAR lc_name.
WRITE text-002 TO lc_name.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
Range of date
CLEAR lc_name.
lc_name = p_date+4(2).
READ TABLE it_t247 WITH KEY mnr = p_date+4(2).
CONCATENATE: text-003 it_t247-ltx sy-datum(4)
 INTO lc_name SEPARATED BY SPACE.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
ENDFORM. " my_top
*& Form END_OF_LIST
 Writes signature line at end of list
FORM end_of_list.
IF sy-ucomm = '&RNT_PREV' OR sy-ucomm = 'AUSW'.
 REFRESH gt_eol.
 PERFORM my_eol USING gt_eol[].
ELSE.
 REFRESH gt_eol.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_eol
 i_end_of_list_grid = 'X'.
ENDFORM. " END_OF_LIST
*& Form my_eol
 text
 -->P_GT_EOL[] text
FORM my_eol USING eol TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader,
 lc_name(60) TYPE c.
Signature Line
CLEAR lc_name.
lc_name = '.'.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR lc_name.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR ls_line.
ls_line-typ = 'H'.
WRITE 'Submitted By:' TO lc_name(28).
WRITE 'Noted By:' TO lc_name+30(28).
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR: lc_name, ls_line-key.
lc_name = '.'.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR lc_name. CLEAR ls_line.
WRITE sy-uline(28) TO lc_name(28).
WRITE sy-uline(28) TO lc_name+30(28).
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
ENDFORM. " my_eol

1.U are not getting the data into Excel when u client Excel Buttton from the ALV display ?
2.if yes then u will get one message stating that templet is Missing like this ?
Regards
prabhu

Error when export report to PDF with a none standard Windows font

Hi,
I got this error when trying to export PDF under VS2008 with an special true type font in the code behind. The error says:
...temp_9550ab94-02fc-4362-b259-cc6de8d6c04b {32E546F5-C6A3-44FC-B8EF-D5E37A1118FA}.rpt:\nOperation not yet implemented.
In the crystal reort under VS2008, I use a special font which is true type and it is already installed in the system, I can see the font in many other software like Word, Notepad, etc... without any problem.
Is anyone know how to fix it? please help.
Many thanks!!!
Lan

Hi Ludek,
I trid the SP, but doesn't work. I can send the font to you, it is only 50K. If you would like to try I can send it to you, but i am not sure how i can upload the font file. I guess any none Windows standard font will have same issue, i guess.
For now, i am going to give up and use image file instead.
Thanks,
Lan
Do you know if it is well-known issue in CR?
- No I do not.
where i can get any SP of CR for VS2008?
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Runtimes for SP1:
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip
I would not mind testing this, but I need to know if there is a free download of this font available. I Googled the font name, but a quick search did not come up with anything.
Alternatively, you could try CR 2008 (12.x) and see if that will do the trick for you. An Eval of CR 2008 is available here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx

Crystal Report: Error while Export to Excel

We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)

I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

Error when exporting to other format from crystal report

Hi,
I have been facing an error "Method 'IRCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version = 11.0.3300.0, Culture-neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overriden." while trying to export the crystal report to another format (e.g. pdf and excel) from an application from a software vendor.
For your information, the machine OS that is running the application is Window 7. Before I did the installation of the application, it already has Visual Studio 2005 and Crystal Report XI Release 1 installed in the Window 7 system. After I had the above error, I went to search more information on the website and found out that I need to upgrade to Crystal Report XI Release 2 from the search results. However, after I upgraded from Crystal Report XI Release 1 to Crystal Report XI Release 2 and apply service pack 6, I still faced the same error when I tried to export. I even tried to uninstall Visual Studio 2005 and Crystal Report XI Release 2 but I'm still facing the same above error while exporting. I also tried to reinstall the application from software vendor but the same error come out.
Your help is highly appreciated. Thanks!!
Regards,
Jennifer

Good morning Jennifer
When you say:
" I also tried to reinstall the application from software vendor but the same error come out."
I wonder if the app you are trying to install is from a 3rd party vendor / developer? If it is, installing CR XI r2 (11.5) will not resolve the issue for you. From the error, the app was compiled with CR XI R1 (11.0) and the only way to get that app to use CR XI r2 will be to recompile it with CR XI r2 assemblies. E.g.; you will have to have access to the source code and then recompile the app, ensuring that you are referencing CR XI r2 assemblies. Or am I missing something here?
Ludek

Getting error while exporting the report

Hi,
I am facing error while exporting the report. Getting below error.
"No data can be exported because there are no rows.Operation failed."
how come this error is coming even though my report contains data.
please do the needful.
i am using the version discoverer 10g.
Thanks,
RC.

I am having the same problem. I found this article in which the user was exporting 100,000 plus records and had the same issue exporting (Discoverer workbook exported to excel error - No dta can be exported and they were able to fix it by adjusting two memory settings in their pref.txt file. However, in my report there are only 1,100 records with eleven columns being returned. I export much larger reports on a daily basis.
Originally, the report was returning records and when I would go to retrieve all records it would tell me that all the rows could not be returned and the data may be incomplete. After scrubbing my SQL I no longer get that message, but the report still will not export and I get the same error as you.
I have not tried the pref.txt settings fix but may try it today to see if that is a workaround. I will then have to evaluate whether it is a good fix or just a band-aid.

Error in exporting report

Similar Messages

Maybe you are looking for