Error in extracting data from SAP using mySQL server database

Hello Experts.
We are now using MySQL server 2005 database for Nakisa OrgChart. We have already configured the SAPExtractor settings. Source-SAP has been provided and Test connection to destination database is successful. We manually created the database ExtractedData and AnalyticData in the MySQL management studio.
We are getting the error upon starting the extraction
Processing Function Read Table Function/BAPI Downloading Tables Organizational Assignment
No Tables were downloaded for Read Table Function/BAPI . Function is flagged as critical.Terminating Extraction.
Processing Stopped ! ! !
Downloading from SAP completed.
Processing Completed.
From CDS.log
ERROR: Sap Authentication : Source {SAP.Connector}: Message {An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)}
We would appreciate some assistance on this configuration
Thanks,
Angelo
Accenture inc.
SAP Basis

Hello Luke,
We have not done any modification of the downloadschema file. We receive message: The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later. when we open the file.
The SAP account we used has SAP_AlLL, SAP_NEW authorizations. Are these authorizations sufficient to perform the data extraction?
Thanks,
Angelo

Similar Messages

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini

Extract data from SAP using SAP NCO 3.0?

Hi,
Now that the new SAP NCO 3.0 connector is out and can be installed on 64bit servers we were wondering if it could be used to perform data extractions from SAP.
So does anyone have any experience of hooking up SAP NCO 3.0 to a SAP system (backend SQL server database) to perform data extraction into a Microsoft Reporting Services environment?
Looking at SAP NCO 3.0 itself it is just 3 DLL files but can't see any installation instructions to then hook this into SSRS as a .Net provider which we could plug into SAP system.
Would be grateful if anyone could share any experience they may have here, thanks.

Hi
SAP NCO 3.0 is SAP Connector for DotNet framework 3.0 or higher. Yes .. you are right, there are only 3 dll files for the same.
It has both 32 and 64 bit version, you can install as per your requirement.
You can download data from SAP with Visual Studio 2008 onwards by including them in your project.
Rgds
Dilip

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Using SQL Server 2012 SSIS to Extract Data From SAP

Hi
What is the current best practice for using SQL Server 2012 SSIS to extract data from SAP R3? Please note we are looking for a solution that does not use SAP BW or SAP OHS.
Ideally we would like to build our ETL SSIS process to make a .NET call to an SAP RFC procedure and avoid using web services.
With SS2012 can we use any of these without using SAP BW:
- SAP .NET Connector
- MS ADO .NET
- BizTalk .NET 3.0 Adapter
Thanks and take care,
Shayne

Hi Shayne,
You can use the .NET Framework Data Provider for mySAP Business Suite along with SQL Server Integration Service (SSIS) to import data from an SAP system into SQL Server database tables, flat files, or other compatible destination types. You can create an SSIS
package that can be executed to import data from an SAP system.
You must use the SQL Server Import and Export wizard to import data into the SQL Server database. You must provide a select query to specify data to be imported. The query must confirm to the semantics supported by the Data Provider for SAP. You can start the
SQL Server Import Export Wizard either from the SQL Server Management Studio or from an Integration Service project in Visual Studio. Detail steps please see:
Importing SAP Data Using SQL Server Management Studio:
http://msdn.microsoft.com/en-us/library/cc185161(v=bts.10).aspx
Importing SAP Data Using Visual Studio:
http://msdn.microsoft.com/en-us/library/cc185254(v=bts.10).aspx
Please feel free to ask if you have any question.
Thanks,
Eileen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

How to extract data from SAP and COBOL using ODI

Hi Folks,
Can you please let me know the procedures in ODI to extract data from SAP and COBOL?
Thank you all for the help.

Hi
You can download Patch 8571830 from Oracle metalink.
It has a new technology "SAP ABAP" and KMs to extract and load data -
RKM SAP ERP and LKM SAP ERP to Oracle.
Thanks

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

Error while extracting data from Generic VBAK Table

Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAP" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
     " in
    line 159:
    "The type of the database table and work area (or internal table) "L_ST"
    "R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,

do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M.

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Problem in Excel after extracting data from SAP Report

Hello,
I have a problem with Excel file after extracting it from one of the SAP report.
When my client extracted data from SAP in to excel he is coming across minus symbol on both sides of the number.
for ex: -447492177-
When i extracted same SAP report in to excel i didnt face any such problem.
Please share your inputs on what could be the problem.

1. Make sure your client and you are using the same version of Microsoft Excel
2. Let your client try to OPEN the exported xls file from a existed workbook instead of double-clicking the file directly.
Atom

Facing Issue while Extracting Data from Essbase using CalcScript

Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5046.f$0(<string>:1)
     at org.python.pycode._pyx5046.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5054.f$0(<string>:1)
     at org.python.pycode._pyx5054.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

Error in extracting data from SAP using mySQL server database

Similar Messages

Maybe you are looking for