Error in generating the pdf form:HR_F_6559
Hi Gurus,
I canu2019t create W2s out , i have the message Error in generating the pdf form: HR_F_6559
HR_F_W2_07
HR_F_W2_AUDIT
Thanks in advance for your help
Soufiene
Please, refer to the following thread:
US - "Error in generating PDF form"
Kind regards,
Graziela
Similar Messages
-
Error In Generating the PDF Form
Hi,
When I'm trying to activate the PDF Form, I got a message asying Error while Generating the PDF Form.
Can we debugg the Form, if yes, can body tell me how to with this process.
Any pointers would be a great Help.
ThankQ
Rohini.Hi Om,
I need to fix this issue and I had taken help from Rohini.
I will try to explain the issue in detail.
I am trying to execute Tax Reporter Transaction PU19. Iam executing Quarterly Form 941 for USA for a Tax Company and a Period. This report gives an output Log and the log had generated errors in the log section General errors and Warnings.
The errors are :
Errors in generating the PDF Form : HR_F_941 and
Errors in generating the PDF Form : HR_F_941_SCHED_B
As we are new to the PDF Forms we don't know why the report has generated and how to find out by debugging or any other way.
So I need to find out how the above errors can be identified?
Thanks and Regards,
Madhan. -
ERROR WHILE GENERATING THE PDF
HI gurus,
We are trying to publish BI reports in the Portal server as Iviews.
In the portal system, when I am clicking the PRINT VERSION button for the
CO cost center (area): Plan/actual: Quarterly iview, its giving the PDF file,
thats well and good.
<b>But when if I am doing the same thing for other iviews, for example: say the iview (COcost center range: Transaction Drill-down).
I am getting the ERROR WHILE GENERATING THE PDF</b>
The question is : <i>its working for some standard iviews and giving error message to other std. iviews.</i>
Please suggest how to resolve this issue.
Regards,
PrasadDear Prasad,
Did you resolve your problem, I have the similar one:
I need to print report made in BEx Report Designer and executed on Portal, but when I press Print Version button I am getting next message:
Error while generating PDF
Any information is much appreciated
Thanks in advance and best regards
Vladimir -
Getting error in Portal "Error while generating the PDF" for BI Report
Hi Experts,
we are gettign the error while trying to generate the PDF file from the Reports.
Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
After this upggradation browser "*Failed to open PDF in Browser"*
Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
Please suggest me the needful on this?
thanks
NarpalHello,
i am facing the same problem and found help by 925741:
"Error while generating PDF"
There is no more information available when clicking on the error.
Used Software:
Adobe 8
SAP_ABA 700 0018 SAPKA70018 Cross-Application Component
SAP_BASIS 700 0018 SAPKB70018 SAP Basis Component
SAP_BW 700 0020 SAPKW70020 SAP NetWeaver BI 7.0
PI_BASIS 2005_1_70 0018 SAPKIPYJ7I PI_BASIS 2005_1_700
BI_CONT 703 0013 SAPKIBIIQ3 Business Intelligence Content
Any other ideas?
Thanks,
Rainer
Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM -
How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central. It's for an online Diet Questionnaire. After people complete the form I'd like them to click "SUBMIT" and the completed form will be emailed to me.
This can be a bit confusing because Acrobat 11 comes with the desktop app that allows you to create simple PDF forms without having a FormsCentral account. Some people find this helpful, but you need to understand that when you generate the PDF form, it is Reader-enabled by Acrobat. In order to edit the form further in Acrobat, you have to create a non-enabled copy of the form. You do this in Acrobat by opening the form and selecting: File > Save a Copy
and opening the copy. It is not opened automatically.
You can now add a button and set it up to submit by email, either using a "Submit a form" action or the submitForm JavaScript method. You can set it up to include just the form data or the entire PDF, and will want to use a mailto type URL. Submitting the form to the FormsCentral server has a number of important advantages over email (much more reliable, more secure, etc.), so you might want to consider it.
If the form needs to be saved with Reader versions prior to 11, then you will need to Reader-enable the document. In Acrobat 11 you do this by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools -
Save the PDF Form with Field Name
HI Guys,
I have the Requirment in PDF Form.The PDF Form is generated with the Adobe Live Cycle Designer.After generating the PDF Form the user filled the details in the form and save the filled form.while clicking the Save button the default PDF name is displayed in the File name box.The Requirement is iam having one field in the form.The Field name value should needs to displayed in the File name box during saving.Is it possible.Once its possible please let me know.This is needs to be delivered very shortly.
Thanks & Regards,
SatheshKumar RYou can save the form with name generated from a field's value, but therefore you will have to install a folder level script first and design a custom save button in your form.
You cannot do this with the applications save or save as... buttons, and you also cannot rename a file on submit.
Here's an example form and a folder level script. (Maybe to complicated fdr newbies)
http://thelivecycle.blogspot.com/search/label/Save -
Facing the Error while opening the PDF Document generated by Adobe Forms
Hi,
I have created an Custom Adobe Form and calling this form through a Custom Program and generating the PDF and could able to download on to my desktop but when i am tyring to open it i m facing the below Error.
"There was an error opening this document. The file is damaged and could not be repaired" .
Please help me in this regard ASAP.
Please do find the attached error screen shot.
Thanks
SushilHi Naveen ,
Have done as per the link but still not opening
same error.
I have created a print program and from there want to generate pdf. But it is not working.
please find the below code : In this i am passing some tables to function module and output is formoutput of type fpformoutput.
Where do i need to do any changes if required.
data: lst_opparam type sfpoutputparams.
data: lst_docparam type sfpdocparams.
data: lfd_fname type funcname.
data: lrf_cx_root type ref to cx_root.
clear: lst_opparam, lst_docparam.
lst_opparam-getpdf = 'X'.
lst_opparam-preview = 'X'.
* lst_opparam-nodialog = 'X'.
call function 'FP_JOB_OPEN'
changing
ie_outputparams = lst_opparam
exceptions
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
others = 5
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
try.
call function 'FP_FUNCTION_MODULE_NAME'
exporting
i_name = 'ZAFGLERC001'
importing
e_funcname = lfd_fname.
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
catch cx_root into lrf_cx_root.
endtry.
lst_docparam-langu = 'EN'.
lst_docparam-country = 'IN'.
call function lfd_fname " '/1BCDWB/SM00000213'
exporting
/1bcdwb/docparams = lst_docparam
appl = 'EREC_ONBRD'
wa_ztbglerc049 = wa_ztbglerc049
wa_ztbglerc050 = wa_ztbglerc050
it_51 = it_51
wa_41 = wa_41
it_42 = it_42
wa_43 = wa_43
it_44 = it_44
it_45 = it_45
it_46 = it_46
it_47 = it_47
it_48 = it_48
importing
/1bcdwb/formoutput = formoutput
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
call function 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif. -
Error while saving interactive pdf form:The document could not be saved.
Hello,
Can anyone please help me here.
Not able to save the pdf form.
I have interactive form which contains static fields,text fields,Document digital signature and a submit button.
After filling and signing the form it will ask for saving the form.But saving is giving error.
Error : The document could not be saved.There was a error reading the document(26).
Can anyone please tell me why i am getting this error.
Thanks in advance,
Menaka.H.BHello,
Integrated into WD application means -> Interactive form generated in SFP transaction is used in abap webdynpro application.
Offline scenarion -> Since it is an interactive form, user will fill the form offline and submit it by email.From the webdyn pro appliaction user will download the form to the local desktop.Fills it offline and submits the form.
Now the interactive form generated directly from sfp tcode is working fine.I can fill the form,Sign it, save it and submit the form.
But the form downloaded from the WD application cannot be saved and is not allowing to dogitally sogn the form.
Its giving error The document could not be saved. there was a problem reading the document(26).
Thanks and Regards,
Menaka.H.B -
Error Generating the Task Form
While publishing a new SharePoint Designer 2010 List Workflow I get an Error:
SharePoint Designer encountered an error generating the task form. Server was unable to process request.--->Activation could not be completed because the InfoPath Forms Services support feature is not present.
I was able to publish SPD Workflows until a couple of days ago. Existing ones can be republished but not new ones.Try running the following cmdlets.
Disable-SPFeature "IPFSSiteFeatures" - URL "Path"
Enable-SPFeature "IPFSSiteFeatures" -URL "Path"
These cmds will restart the Infopath Forms Services support features, which is responsible for supporting publishing Infopath Forms.
Hope this works for you. -
How to generate PDF using FDF file and the PDF form template (PHP)
Hi Folks,
I'm really sorry that I couldn't follow all the valuable discussions going on here, regularly. I need some immediate help.
I NEED A PHP SOLUTION. I'm able to generate FDF files using the PDF Form Template in PHP. So, I have a collection of FDF files, which seeks the PDF template, while opened and populates the template with FDF data. Now if I need to save this PDF file, I have to do it manually clicking SAVE option. But, I need to convert FDF to PDF in bulk. So, I need some PHP based solution. The PHP script takes the PDF template and the FDF file and merges them to generate a complete populated PDF file. I know it's possible, but don't know how. I've seen Adobe FDF Toolkit. But by default it doesn't show any guideline for PHP. Please help me to write this code. I'm a professional coder. I can understand your hints and tutorials. PLEASE HELP GOOD PEOPLE.The only reason I am responding to this post is because the poster sent me a request through the forum message system asking for my help.
Although I did populate PDFs with FDF data generated by web forms a year or so ago, I have since abandoned that kind of solution. It was a big headache. I found it far more stable and flexible to use html, php and css to populate forms that are almost as nice looking as PDFs.
So my advice is, if you can possibly avoid going the FDF/PDF route, you will be better off. -
Regarding UCF_AcroForm error displayed when trying to open the pdf form
Hi,
Iam receiving the pop up when trying to open the pdf form.The Error is Server Error Class: UCF_AcroForm Method: Error.The Error displayed in some system and in some other system the form is working fine.The Form is created using the Designer 8.0.The form is working fine in reader 8.0.Is there any problem in the reader version.Is there any solution for this problem please provide.
Thanks and Regards,
SatheshKumar RSathesh,
Similar issue has been reported at SDN so searching would have helped you. See below threads for solutions:-
UCF_AcroForm error
MSS UCF_AcroForm error displayed when trying to display form in PCR
Chintan -
How to Get XML from the PDF form generated using Designer that is stored in LC
We have a Requirement of Generating reports on what a PDF form is comprised of? It is easy for us to scan / parse the XML format of the PDF form and get all the relavent Info we need. We are able to see the XML format of the PDF form when we open up the Form in Designer.
But we are trying to run this report in a Batch Mode for many PDF files. I need to know how to get a XML format of the PDF file that is stored in LC that was developed using Designer. Once we are able to get the XML of the PDF form it is just a scan / parse to get the relavent data.
Can some one tell me how to get the XML format of a PDF file stored in the LC?If I place the PDF form on the LC server - Can you let me know of the tools you are referring to get XML design from the PDF form?
Is it through a Process Orchestration I need to run the PDF through to get a XML design out of it?
I am fine in storing the PDF in the LC server? How will I get the XML design (XML) from this PDF on the server? -
Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.
Dear All,
I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
CALL FUNCTION wa_funcnm
EXPORTING
/1bcdwb/docparams = fp_docparams
invoice = invoice
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
Regards,
Tushar.Hi Tushar
You need to the following parameters when calling FM. Background WF process cannot handle dailog.
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf = 'X'.
Refer to Thread below
Creating Attachments to Work Items or to User Decisions in Workflows
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = l_formname
IMPORTING
e_funcname = l_fm_name.
* E_INTERFACE_TYPE =
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF.
fp_docparams-langu = 'X'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION l_fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
emp_info = fs_per_info
IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF. " IF sy-subrc <> 0
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT = result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN OTHERS.
ENDCASE. " CASE sy-subrc
ENDIF. " IF sy-subrc <> 0.
ENDFORM. " GET_FUNCTION_MODULE
*& Form CONVERT_PDF_BINARY
FORM CONVERT_PDF_BINARY .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FP_FORMOUTPUT-pdf
* APPEND_TO_TABLE = ' '
* IMPORTING
* OUTPUT_LENGTH =
TABLES
BINARY_TAB = t_att_content_hex .
ENDFORM. " CONVERT_PDF_BINARY
Regards
Sandy -
Errors when generating a adobe form in report
Hello,
I have a problem with the solution of the errors to generate an adobe form. I put in a situation:
- I need to create a form with several dinamic tables, each below the previous. For each dinamic table, apart from the header row (column titles) was necessary to create a table title above the header. Furthermore, this title should remain with the table, for example, if the header row and first row of the table is not entering the page, jump to the next page (but so must the title of the table next to them)
My version of LCD is version 9.0.1.0 and adobe reader is 10.0
One possible solution is proposed in this link (put text above the table with the title and check "Keep with Next "):
http://forums.adobe.com/thread/849603?tstart=0
This solution works correctly in the Preview in Adobe Live Cycle Designer, but when I run the form with a report generates an error file "error.pdf" Does anyone know who is that? The lines of code in which failure is just where the title of the table causes "Keep with Next ". In the Adobe forum, I have commented that the utility began to be usable in version 8.2 of ADS, we believe we have the 8.0 but not sure.
ERRORS:
Render status: success with warnings (pdf' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.0.5.
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
Render status: success with warnings ('pcl' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
PS: I searched the forum but I can not understand the answers.
Thanks very much
Edited by: jmgaley on May 13, 2011 1:52 PMHello,
I found a possible cause of my failures. Has anyone needed to change the default version of PDF generated by ADS (Adobe Document Services)?
"Changing the Default PDF Version"
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
My forms always generated pdf 1.6 (Acrobat 7.x), so they are generating so many errors. Also when I use the preview of the SFP transaction form, the need for PDF version is "1.7, Adobe Extension Level 3 (Acrobat 9.x)"or "1.7, Adobe Extension Level 5 (Acrobat 9.x) " (changing Form Properties -> Defaults -> Version of destination)
How do you get out this version from the ADS? What you need to change?
Greeting and thanks -
XML Publisher Report not generating the PDF output.
Hi,
I am trying to develop a XML Publisher Report in R12 Vision Instance.
I have developed the rdf report and concurrent program with XML as output format. Ran the concurrent program and I got the XML output. Based on XML output I have created the rtf template. Using both the template and xml output I have created in Data Definition and Template in XML Publisher Administrator Responsibility. Now I am comming to the concurrent program and running the program, here instead of generating the PDF output it is generating again the XML output and concurrent program completing with warning status.
When I am trying to do the same in 11i Vision Instance, Concurrent Program completing with normal status and when trying to view the output it is saying "Unable to Publish output for the Processed Request".
Kindly please help me out in this issue.
Thanks,
Manasa.Hi Mahesh,
Here the concurrent programs are not erroring out. It is completing with Warning status and when we click on View Output the output is coming in XML format instead of PDF, this is in R12 Vision Instance.
In 11i Vision Instance, concurrent program is completing with Normal Status but when we click on View Output it is saying "Unable to Publish output for specified request".
Thanks,
Manasa.
Maybe you are looking for
-
Can I have the same itunes on two computers?
I want to have the same info on one computer, mine as i do on my husbands. He doesn't use itunes & sometimes we only take one computer with us. I would like for them to be able to sync together with mine & his laptops.
-
How can i use Order by inside a sub query in Oracle
Hi!, Please help me, it's an urgent... how can i use Order by clause SELECT SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID ,Qty,Profit,DD.dDate , (SELECT nvl(S.Qty,0) FROM Stock S , DateDimension DD1 WHERE S.DateKeyID = DD1.DateKeyID AN
-
Hey all! Recently got an IPad Mini. Already have a Macbook. I have a folder full of songs(lyrics and chords) on the Mac. The file type inside the folder are all "Web Archive". I am trying to transfer this folder to my Mini, via Bluetooth. It won't al
-
Can't open Word files in Yosemite
I installed Yosemite on my MacBook Pro Saturday. Now, I can't open existing files with Microsoft Word 2011. I can create and open new files, but I can't open old files. What gives?
-
Clean downconversion from DVC-Pro HD to NTSC for Broadcast
We just shot some PSAs for the local DirecTV channel with the HVX200. We edited the footage in Final Cut and everything looked good. Then we downconverted the footage in Final Cut to NTSC and outputted it to DVCam. When we played it back on a TV moni