Error in geting database connection....

Hi Experts,
Now Im getting an error when Im trying to get a db connection through ODBC
Data Source Name=Opp
Database = MAXDB
EJB 2 Bean = CMP
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/TestEJBProjectEAR cannot be started. Reason: it has hard reference to resource Opp with type javax.sql.DataSource, which is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:717)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:513)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:180)

Hi,
Check if your DataSource defined correctly. You can do it by going to Visual Admin => Server node => Services => JDBC Connector -> REsources -> Datasources and see if Opp is defined and active there.
Regards,
Mike

Similar Messages

Workspace Error 8001: The Database Connection could not be found

We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
I can see all the existing reports but cannot use any of them as I dont have any connections.
Also I cannot create any new connections
I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
Not sure what the problem is.
Any suggestions?

Hi Pat,
It loks like your Biplus relational DB is corrupted, try with those steps:
1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
2. Configure against the backup database (Drop and recreate tables option).
3. Re-register BI+ with Shared Services.
4. Re-deploy BI+.
5. Test Workspace and add new connections.
Regards.

Error in odbc database connection

Hi All,
I have created database connection from SAP system to another no sap system (Radar) using the tcode DBCO and maintained the following parameters
DB connection: RADAR_DEV
DBMS            : MSS
user Name : RADAR_DVLP
Db password : **********
conn info : msql_server=hostname of SQL server msql_dbname=DB name object_source=DB name
It is gives a below short dump when this db connection (DB connection name) is used in a program by ABAPer
error message
                                                                                The error occurred in the current database connection "RADAR_DEV".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_NATIVE_SQL_ERROR', was not
caught, which
led to a runtime error. The reason for this exception is:
How to correct the error
Database error text........: "Line 1: Incorrect syntax near '.'."
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"ZRADAR_EXTRACT" or "ZRADAR_EXTRACT"
"START-OF-SELECTION"
Can you please help me on resolving this issue
Thanks,
Vadi

Hello Vadivambal,
Could you please provide the syntax of line, on which the dump occurs.
Is user RADAR_DVLP able to fetch same data without an ABAP program?
Regards,
Ammey Kesarkar

Error in Remote Database Connection

I am trying to establish a connection for other database through remote database connection whenever i click the test connection i am getting the error like
Bad Connection
GetConnection failed: Caught Exception from getUrlAndDriver
In trace file it shows like
PSAPPSRV.5794 (42)      1-26493 14.30.43 19.832981 Cur#1.5794.LN290401 RC=0 Dur=0.000098 COM Stmt=SELECT VERSION FROM PSVERSION WHERE OBJECTTYPENAME = 'SYS'
PSAPPSRV.5794 (42)      1-26494 14.30.43 0.020306 Cur#1.5794.LN290401 RC=0 Dur=0.000064 COM Stmt=SELECT VERSION FROM PSVERSION WHERE OBJECTTYPENAME = 'SYS'
PSAPPSRV.5794 (42)      1-26495 14.30.43 0.016844 >>> start Nest=00 MISCTOOLS_WRK.TEST_CONNECT.FieldChange
PSAPPSRV.5794 (42)      1-26496 14.30.43 0.000013 >>>>> Begin MISCTOOLS_WRK.TEST_CONNECT.FieldChange level 0 row 0
PSAPPSRV.5794 (42)      1-26497 14.30.43 0.000019 1: DoSaveNow();
PSAPPSRV.5794 (42)      1-26498 14.30.43 0.022858 <<< end Nest=00 MISCTOOLS_WRK.TEST_CONNECT.FieldChange Dur=0.022891 CPU=0.000000 Cycles=3
PSAPPSRV.5794 (42)      1-26499 14.30.43 0.003037 >>> resume Nest=00 . MISCTOOLS_WRK.TEST_CONNECT.FieldChange
PSAPPSRV.5794 (42)      1-26500 14.30.43 0.000028 1: DoSaveNow();
PSAPPSRV.5794 (42)      1-26501 14.30.43 0.000004 2: &oRd = CreateJavaObject("com.peoplesoft.pt.remotedb.PSJDataSource");
PSAPPSRV.5794 (42)      1-26502 14.30.43 0.781008 3: &b = &oRd.TestConnection(PSREMOTEDBDEFN.REMOTEDB_ID.Value);
PSAPPSRV.5794 (42)      1-26503 14.30.43 0.000041 Fetch Field: PSREMOTEDBDEFN.REMOTEDB_ID Value=HCM91PRD
PSAPPSRV.5794 (42)      1-26504 14.30.43 0.019209 Cur#2.5794.LN290401 RC=0 Dur=0.000097 COM Stmt=SELECT REMOTEDB_ID,DBTYPE,DESCR,LOCAL_CONNECT_FLAG,REMOTEDBCONNTYPE,REMOTEDBNAME,DBSERVER,DB_PORT,INFORMIXSERVERNAME,USERID,PASSWORD FROM PSREMOTEDBDEFN WHERE REMOTEDB_ID = :1
PSAPPSRV.5794 (42)       1-26505 14.30.43    0.004232 Database Options: override_connection_reset: 0
PSAPPSRV.5794 (42)      1-26506 14.30.43 0.048569 4: If &b Then
PSAPPSRV.5794 (42)      1-26507 14.30.43 0.000003 7: WinMessage("Bad connection", %MsgStyle_OK);
PSAPPSRV.5794 (42)      1-26508 14.30.43 0.000055 8: If &oRd.success() = False Then
PSAPPSRV.5794 (42)      1-26509 14.30.43 0.000013 9: WinMessage(&oRd.getErrStr(), %MsgStyle_OK);
PSAPPSRV.5794 (42)      1-26510 14.30.43 0.000014 10: End-If
PSAPPSRV.5794 (42)      1-26511 14.30.43 0.000062 >>> reend Nest=00 . MISCTOOLS_WRK.TEST_CONNECT.FieldChange
PSAPPSRV.5794 (42)      1-26512 14.30.43 0.009340 Cur#1.5794.LN290401 RC=0 Dur=0.000075 COM Stmt=SELECT PTTAPAGECUST FROM PSUSRTAPAGECUST WHERE MENUNAME = :1 AND PNLGRPNAME = :2 AND PNLNAME = :3 AND OPRID = :4
PSAPPSRV.5794 (42)      1-26513 14.30.43 0.000009 Cur#1.5794.LN290401 RC=0 Dur=0.000000 Bind-1 type=2 length=9 value=UTILITIES
PSAPPSRV.5794 (42)      1-26514 14.30.43 0.000003 Cur#1.5794.LN290401 RC=0 Dur=0.000000 Bind-2 type=2 length=14 value=REMOTEDB_TABLE
PSAPPSRV.5794 (42)      1-26515 14.30.43 0.000003 Cur#1.5794.LN290401 RC=0 Dur=0.000000 Bind-3 type=2 length=8 value=REMOTEDB
PSAPPSRV.5794 (42)      1-26516 14.30.43 0.000003 Cur#1.5794.LN290401 RC=0 Dur=0.000000 Bind-4 type=2 length=9 value=CAPIADMIN
Edited by: abdul43 on Apr 11, 2013 12:19 AM

Thank you for your help, RK.
The problem was that sidadm was not the owner of ORA_NLS.
Now I have another problem: when running startsap not boot disp + work.

Sybase Connection Error - cannot establish database connection

BO Data Services Tool -> Creation of new Data Store -> Sybase ASE
When I tried to create a sybase datastore(New connection), I've got this error message. But I am able to connect to sybase database with client application with same connection parameter. I appreciate if someone come across same issue.
ERROR MESSAGE
*WARNING: Cannot establish database connecton.
u2018Sybase connecton error: <Sybase ASE Server message number <1640> State <2> Severity <16> From Server <tstlS03>: Message Text is:
Adaptve Server requires encrypton of the login password on the network.
Sybase ASE Server message number <4002> State <1> Severity <14> From Server <tstlSO3>: Message Text is: Login failed.
Sybase CS Library message number <6717S468> Severity <4>: Message Text is: ct_connectO: protocol specific layer: external error: The attempt to connect to the server failed.>.u2019 lODI- 1111341)

I tried to create repositories for sybase, it failed. But it succeeded when created datastore. The procedures's as follow:
1. Create ODBC for this sybase connection, and it should display "Connection successful" when you click "Test connection".
(you need to specify several parameters like user id & password, server,database name and file, etc.)
2. Create datastore by using ODBC connection.

Error in Mysql database connectivity

hello,
there is problem in Mysql database connectivity.
when i connect JSP program to Mysql database it gives error :
Server configuration denied access to data source
please help me asap
kuldip jain
[email protected]

i m also working on Mysql Java but on Window 2000 platform
here is the Java code which successfully runing on my machine
import java.sql.*;
public class TestMySql
     public static void main(String[] Args)
          try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
Connection C = DriverManager.getConnection(
"jdbc:mysql://server2:3306/Db?user=root");
Statement Stmt = C.createStatement();
ResultSet RS = Stmt.executeQuery("SELECT * from T1");
while (RS.next()) {
                         System.out.println(RS.getString(1));
catch (Exception E)
System.out.println("SQLException: " + E.getMessage());

Getting 'unidentified error occured' while database connecting on local computer

I have downloaded CS5 Dreamweaver trial version on my c
omputer, with windows 7.
I have also downloaded easy php as php-mysql-apache server on the same computer.
While creating a databse connection, I get following message
'Undefined error ocurred'.
and the connection does not take place.
If I close the connection wizard, with giving database name, connection is shown on the applications pane, but when tables icon is clicked, no tables are show.
Also when I try to create a recordset, it shows that there are no tables in the databse.
I have insertd screen shots of the connection wizard.
Kindly help.

I'm not familiar with EasyPHP, but it should work the same as any other local testing environment.
In the Servers panel, deselect the Remote checkbox. Leave only the Testing checkbox selected.
Something unusual about the Local Info panel is that the Web URL, although grayed out, is accessing http://127.0.0.1:8888. Localhost is an alias for 127.0.0.1, so that's not a problem, but the colon followed by 8888 is a non-standard port. Does EasyPHP run Apache on port 8888? If so, you need to change the Web URL in the Server Basic panel to http://localhost:8888/InventaEnqFrm/.
Also, if Apache is running on port 8888, it's very likely that MySQL is running on port 8889, so you would need to use localhost:8889 in the MySQL Connection dialog box.
The other obvious thing to check is that both Apache and MySQL are running.
By the way, it's normal practice to put the local files in the same location as the testing server.

Error 3005 using Database Connectivity Toolkit

I'm using the LabVIEW Database Connectivity Toolkit, version 1.0.132 with LabVIEW 8.5. When it tries to create an ADODB.Recordset object in the Conn Execute.vi, the "Automation Open" function node throws error 3005, "The specified object can't be created".
I've read somewhere that this may be related to an unregistered DLL or ActiveX component. Is there a way to find out what DLL this function uses? Any suggestions on other things to look for?
Thanks,
Mike

Good Evening Mike,
This Knowledge Base article seems to show a solution to a similar issue. Let me know the results and if you see any errors in the process.
http://digital.ni.com/public.nsf/allkb/DE740209C3CC097D862571D2006DA0BD?OpenDocument
Have a good day,
Connor

Error when changing database connection

I changed my connections.properties file to a database other than the one I used to develop my application. I was able to connect to the new database successfully from the application but when I tried to insert a new row I received the following error:
JBO-26041: Failed to post data to database during "Insert". SQL Statement "BEGIN INSERT INTO ITEMS (ITEM_ID, ITEM_STATUS, CATEGORY, SOURCE_TYPE, IMAGE_TYPE) VALUES (:1,:2,:3,:4,:5) RETURNING ITEM_ID INTO :6; END;".
ORA-06550: line 1, column 102: PLS-00103: Encountered the symbol "RETURNING" when expecting one of the following...
Does anyone know what is causing this problem?
Thanks,
Joanna.
null

Your new database connection must be pointing to an older database which doesn't support the returning clause. I believe this was added in the 8.x series.
Rob
null

Error during create database connection (JDeveloper)

Hello!
Have you any suggestions of this: When I try to create new database connection to 9i DBMS, I've got errors:
ORA-00604: error with recursive SQL
ORA-12705: Invalid or unknown NLS parameter value specified.
At the same time I try to do the same with another one DBMS,
10g, and everything is Ok.
Thanks.
Andrew.

Stephen, sure, I did all actions you described, during "Create new Database Connection":
(filling in driver (thin), host name (i.e. localhost), jdbc port (i.e. 1521), and sid (i.e. orcl) )
Th result I think should be looks like
jdbc:oracle:thin:@wizard.shots.ru:1522:VIVD
(tns for that DBMS is
VIVD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wizard.shots.ru)(PORT = 1522))
(CONNECT_DATA = (SID = VIVD))
As I wrote, the same actions give OK result, if dbms = 10g.
But, I want to test OEBS adapter, and OEBS stands on 9i DBMS only,
so I need to work with 9i
Thanks.
Andrew.

MSI error while installing database connectivity toolkit

Hi!
We are facing problems while trying to install the database connectivity toolkit (comes as subpart of the enterprise connectivity toolkit).
The behaviour is odd. Some months back it used to install OK. Now, it fails during installation. Pls see attached .zip file that shows image of the error messages.
Pointers:
1) The MSI error message has increasing numbering. First attempt to install gives mesages MSI4, next might be MSI8 and so on.
2) It used to install perfectly until few months back
3) We have tried to inatll it on freshly formatted computers having LV 6.1 and LV 7.1 runtimes.
4) OS is Win2000 with SP4
5) Few days ago it installed fine on a PC on which it had not installed for many months!
6) We have tried for all the CDs/backups where we had this software. It still fails.
7) All our other toolkits - Internet, SPC, Sound&Vibration, SMT continue to install flawlessly.
We are unable to see any pattern or reason for this installation failure and would appreciate any help.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu
Attachments:
error messages.zip ‏76 KB

Hello Kileen,
1. If you’re installing from the CD, sometimes the installer has a hard time grabbing the files from the CD. Try copying the installation CD contents over to a temporary folder on the computer and run the installer again.
> We tried this. Problem continues.
2. Try changing permission settings in your registry:
KB 38TFAUZH: Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?
> My system is Win2000 and I am unable to reach the settings mentioned in above link (which is for WinXP)
3. Turn off all virus scanners. Rerun the installation.
>We tried this. Problem continues.
Hope to see a way out.
- Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

"Error establishing a database connection" after scale database

Hello, i have a wordpress website hosted at my azure account (www.timothy-k.com). I was trying to scale my sql database and i have changed it from standard to basic. Then, I cant connect to my site, because i have this error.
I scale the database again from basic to standard but the issue persists.
In the website dashboard I can see an another mysql db as a linked resource.I check the credentials for wp-config and they are ok.
Can you help me?

Hi DigitalJo,
Are you moving between the service tiers using the Azure Management Portal? Can we have the error which you get?
Connections to the database may be temporarily dropped when a performance level change or upgrade/downgrade completes, and a few seconds may elapse before connections can be re-established. SQL Database applications should be coded to be resilient to dropped
connections as this can occur anytime in SQL Database when a computer fails in the data center and the SQL Database service fails over the database.
Reference :
https://msdn.microsoft.com/en-us/library/azure/dn369872.aspx
Regards,
Mekh.

Error in mysql database connection

hi
this ramesh again........
i tried to run below code :
import java.sql.*;
public class MysqlConnect{
     public static void main(String[] args) {
          System.out.println("MySQL Connect Example.");
          Connection conn = null;
          String url = "jdbc:mysql://localhost:3306/";
          String dbName = "lux1";
          String driver = "com.mysql.jdbc.Driver";
          String userName = "luxmi";
          String password = "luxmi";
          try {
               Class.forName(driver).newInstance();
               conn = DriverManager.getConnection(url+dbName,userName,password);
               System.out.println("Connected to the database");
               conn.close();
               System.out.println("Disconnected from database");
          } catch (Exception e) {
               e.printStackTrace();
but getting error message like:
C:\Documents and Settings\Luxmi\My Documents\db vehiclefiles>java MysqlConnect
MySQL Connect Example.
java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at MysqlConnect.main(MysqlConnect.java:13)
C:\Documents and Settings\Luxmi\My Documents\db vehiclefiles>
plz help me out..........
thanks............
ramesh

your error means that your program can not load the class specified.
you have to put the driver jar file (in mysql case it named "mysql-connector-java-3.1.12-bin.jar") put it in your class path.
the easiest and famous class path is:
%JAVA_INSTALLATION_PATH%\jre\lib\extGood Luck
Ahmad Elsafty

Unsatisfied link error for oracle database connection

Hi all,
I am tryin to establing connection to the oracle database through weblogic 6.1.
the connection starts normally and then it gives me an error stating that weblogicoci37
is not found in the java library path. I tried to find it out in the weblogic
directory but managed to find out some files with ...oci36. Am doing something
weird!!
I am sure i downloaded the correct driver. My OS is NT and webserver 6.1 and the
jdriver is ocirel510sp11 package for oracle. Would be great to have some suggestions!
i have listed the error below.
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary(weblogicoci37) threw java.lang.UnsatisfiedLinkError:
no we
blogicoci37 in java.library.path
at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:226)
at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:167)

found the error, i forgot to add the oci817_8 folder from the weblogic bin directory
in the path.
"arif" <[email protected]> wrote:
>
Hi all,
I am tryin to establing connection to the oracle database through weblogic
6.1.
the connection starts normally and then it gives me an error stating
that weblogicoci37
is not found in the java library path. I tried to find it out in the
weblogic
directory but managed to find out some files with ...oci36. Am doing
something
weird!!
I am sure i downloaded the correct driver. My OS is NT and webserver
6.1 and the
jdriver is ocirel510sp11 package for oracle. Would be great to have
some suggestions!
i have listed the error below.
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary(weblogicoci37) threw java.lang.UnsatisfiedLinkError:
no we
blogicoci37 in java.library.path
at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:226)
at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:167)

Error in Getting Database Connection from datasource

Hi,
I am getting the following error when I tried to get the connection from the datasource object.
The call is made by the client proxy and the code is getting executed on the server side.
   InitialContext ic = new InitialContext();
   DataSource ods = (DataSource)ic.lookup(dataSourceJndiName);
            conn = ods.getConnection();
ods.getConnection() is giving the following error
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occured in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Not allowed to open connection!
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:59)
     at com.delos.cmx.server.datalayer.DataSourceConnectionData.getDatabaseConnection(DataSourceConnectionData.java:132)
     ... 37 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: Not allowed to open connection!
     at com.sap.engine.services.connector.resource.impl.RestrictedResourceSetImpl.getSharedEventHandler(RestrictedResourceSetImpl.java:64)
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:172)
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
     ... 38 more
     at com.sap.engine.services.ejb.exceptions.BaseRuntimeException.writeReplace(BaseRuntimeException.java:273)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
     at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:120)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:270)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:165)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:102)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:140)
I am unable to proceed because of this error.
I would appreciate any help on this.
Thanks
Kavitha

Hi Kavitha,
If u have not gone through the link given below then
plz visit it, it may help u.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/2f2c4142aef623e10000000a155106/content.htm
Regards,
Narinder

Error in geting database connection....

Similar Messages

Maybe you are looking for