Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

Similar Messages

Error in global conversion rule for InfoObject 0INCOTERMS2

When I activate BI content 2LIS_12_VCITM with transfer rule, The transfer rule was error with the message " Error in global conversion rule for InfoObject 0INCOTERMS2" and Mgs No. 263.
The transfer rule cannot be activated.
I checked the 0INCOTERMS2 infoObject . The global conversion rule is no error.
The global conversion is in below.
============================================================
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0INCOTERMS2(000028) TYPE C.
Conversion rule for InfoObject 0INCOTERMS2
    Data type       = CHAR
    ABAP type       = C
    ABAP length     = 000028
FORM CONVERT_0INCOTERMS2
USING    RECORD_NO LIKE SY-TABIX
           SOURCE_SYSTEM TYPE RSA_LOGSYS
           IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0INCOTERMS2 " InfoObject value
           RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line        -
TRANSLATE RESULT TO UPPER CASE.
$$ end of routine - insert your code only before this line         -
ENDFORM.
=================================================================
If you have any idea or face the similar problem, please suggest solution.
Thank you.

Good afternoon,
If you have not done so already can you apply the SAP note 1387854 in your system and it should prevent the problem from happening again. If you also reactivate the infoobject 0INCOTERMS2 in RSD1 then it should be possible to manually activate the transfer rule.
Best Regards,
Des

Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,

Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes.

Error in Global Conversion rule for InfoObject

Hi Gurus,
I am working on SAP NetWeaver 2004s BW 7.0, I have extracted the SD cube 0SD_C03(sales overview) content from the business content and noticed the infoobject's transfer rules are not active and when i tried to active them i am getting the following error "Error in global conversion rule fro infoObkect 0DOC_CATEG"
"NO PSA exits for the infoObject 0DOC_CATEG"
Please help me to resolve the problem.
Thanking you
Mrudul.

Hi,
This solution of dummy change in routine worked for me.
Thanks!!!
Regards,
Rohit
Edited by: Rohit Chhaparwal on Feb 23, 2010 12:18 PM

Error in global conversion rule for 0DOC_CATEG

Hi Friends,
My transfer rules are inactive for 2LIS_11_VAITM. When i tried to get activate i am getting the below error message...
Error in global conversion rule for 0DOC_CATEG
How i can activate the transfer rules.
is there any global routine for this infoobject.
Please suggest a solution.
Thanks & Regards,
Anand

Hi Reddy,
Goto Change mode of the info object 0DOC_CATEG. Just edit the description of 0DOC_CATEG by adding a "." and activate it.
Again change the description by removing the "." and activate the info object.
After doing this, activate the transfer rules. It'll work fine.
-- Selva

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

Errors with the global conversion rule

Hi Guys,
When I activate the DSO,I get an error "Errors with the global conversion rule".I applied OSS note 1387854.But the problem still persists.I did not find any replies on SDN for this error,so posting it again.
If anyone knows how to proceed,please help! <REMOVED_BY_MODERATOR>
Thanks,
Sri
Edited by: Pravender on Dec 9, 2010 4:51 PM

the error might show due to which infoobject this error is happening.
that particular infoobject might conatin a transfer routine. Open the transfer routine in the infoobject, do a dummy change, save the routine and activate the infoobject, then try activating the DSO.
this might do the trick . Hope this helps.
rgds, Ghuru

Projects Release - Error: Enter a Distribution Rule for Asset without val

Hi Experts ,
While Releasing Projects , we got error :
Enter a Distribution Rule for Asset without a Validity limit.
Message No : KD059.
Diagnosis:
The settelement Profile used requires you to define a distribution rule for asset . For period 005 , 2009 , however not created a distribution rule for Asset.
We gave checked Settelement Profile , still we are not clear what settings is causes for this error ,
Please throw some light on if some one come across ...
Regards,
Sujana

check out OSS note 115618

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Jakarta Beanutils - Conversion rules for null

Hi all,
I am using the BeanUtils.copyProperties(target, source) method to copy my Struts ActionForm String-only fields into my Business JavaBean's typed fields (String, Boolean and Integer fields).
The thing I am having trouble understanding is if there is no request variable sent for a particular value, this value is null in the Struts action form - but the copyProperties method uses this null String to populate an Integer field on my business bean as new Integer(0) - and not simply populating this value with null.
This doesn't seem intuitive to me - if the HTML form had no value for a certain field, I expect both ActionForm and Business bean to also have a null value - the the form have the value "0", then I would expect this to get mapped through to new Integer(0) in the back end.
Is there any documentation that explain the default BeanUtils conversion rules, or ways or adjusting these rules programatically ?
I have browsed the jakarta site for a while, but not seem anything of immediate use, and google isn't helping at all !
Many thanks for you help,
Ben

It certainly seems that all null Strings get mapped to the "default primitive value" for the wrapper class - 0 for Integer, false for Boolean etc...
I think the problem here is I was looking for the copyProperties method to be a bijection (1 to 1 mapping) between String and Integer, e.g."1" maps to new Integer(1), and Integer(1) maps to "1"
"0" maps to new Integer(0), and Integer(0) maps to "0"
null String maps to null Integer, and null Integer maps to null StringBut it seems null String maps to new Integer(0), and new Integer(0) maps back to "0" - which is not my original value.
Anyone know how to force this behvaiour or explain why the library doesn't follow what is, AFAICT, a more logical conversion scheme ?

ALE : conversion rule for field value to become null

Dear experts,
I need to pass a material from one system to another with ALE. The problem is that the field marc-prctr (profit center) of this material is populated in the first system, but it does not exist in the second, so I assume transaction bd79 should be used to convert somehow the value of prctr to initial.
How can I do that??? I have already tried defining a conversion rule and assigning it to message type MATMAS, segment E1MARCM, but it did not work.
Please help.

Did you check this?<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm</a>

I have international carrier charges for sms use when activating imessage would this be correct?

I have been charged for sending international SMS by my service provider when activating iMessage would this be correct?

Well definitly give live chat a try.
If after that and having already phoned them, you can still not get anywhere, maybe contact the mods using this form:
If you fill in this form: http://bt.custhelp.com/app/contact_email/c/4951 with a link back to your post for ref, the mods will get back to you. it can take up to 3 days.
But to be fair to the mods, give Live Chat a try first.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Error While creating a rule for trimming spaces

Hi All,
Please can you tell me the correct syntax for trimming the Spaces from the beginning of the word.
I tried like this but it is giving error as below:
BEGIN RETURN
ltrim($SPACES_TRIM, '');
END
ERROR: The return statement is expected to return a conditional value: found type<VARCHAR>. (COR-10622)
Please do help me its urgent.
Thanks & Regards,
DJ

Hi Deepak,
when you create validation rules they always have to return TRUE or FALSE conditions. (A record can pass or fail your expression.
So your expression above returns a VARCHAR string, as you can read in the User guide, you are replacing leading nothing '' at the beginning of your string $SPACES_TRIM.
You need to understand basic concept for validation rule expressions and use of functions.
There are lots of great product tutorials here on the SCN, that describe scope, features and functionalities of Information Steward, so you got a understanding of what you can do with IS.
NIels

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Similar Messages

Maybe you are looking for