Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,

Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes.

Similar Messages

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

Error in global conversion rule for InfoObject 0INCOTERMS2

When I activate BI content 2LIS_12_VCITM with transfer rule, The transfer rule was error with the message " Error in global conversion rule for InfoObject 0INCOTERMS2" and Mgs No. 263.
The transfer rule cannot be activated.
I checked the 0INCOTERMS2 infoObject . The global conversion rule is no error.
The global conversion is in below.
============================================================
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0INCOTERMS2(000028) TYPE C.
Conversion rule for InfoObject 0INCOTERMS2
    Data type       = CHAR
    ABAP type       = C
    ABAP length     = 000028
FORM CONVERT_0INCOTERMS2
USING    RECORD_NO LIKE SY-TABIX
           SOURCE_SYSTEM TYPE RSA_LOGSYS
           IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0INCOTERMS2 " InfoObject value
           RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line        -
TRANSLATE RESULT TO UPPER CASE.
$$ end of routine - insert your code only before this line         -
ENDFORM.
=================================================================
If you have any idea or face the similar problem, please suggest solution.
Thank you.

Good afternoon,
If you have not done so already can you apply the SAP note 1387854 in your system and it should prevent the problem from happening again. If you also reactivate the infoobject 0INCOTERMS2 in RSD1 then it should be possible to manually activate the transfer rule.
Best Regards,
Des

Error in Global Conversion rule for InfoObject

Hi Gurus,
I am working on SAP NetWeaver 2004s BW 7.0, I have extracted the SD cube 0SD_C03(sales overview) content from the business content and noticed the infoobject's transfer rules are not active and when i tried to active them i am getting the following error "Error in global conversion rule fro infoObkect 0DOC_CATEG"
"NO PSA exits for the infoObject 0DOC_CATEG"
Please help me to resolve the problem.
Thanking you
Mrudul.

Hi,
This solution of dummy change in routine worked for me.
Thanks!!!
Regards,
Rohit
Edited by: Rohit Chhaparwal on Feb 23, 2010 12:18 PM

Error in global conversion rule for 0DOC_CATEG

Hi Friends,
My transfer rules are inactive for 2LIS_11_VAITM. When i tried to get activate i am getting the below error message...
Error in global conversion rule for 0DOC_CATEG
How i can activate the transfer rules.
is there any global routine for this infoobject.
Please suggest a solution.
Thanks & Regards,
Anand

Hi Reddy,
Goto Change mode of the info object 0DOC_CATEG. Just edit the description of 0DOC_CATEG by adding a "." and activate it.
Again change the description by removing the "." and activate the info object.
After doing this, activate the transfer rules. It'll work fine.
-- Selva

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

Errors with the global conversion rule

Hi Guys,
When I activate the DSO,I get an error "Errors with the global conversion rule".I applied OSS note 1387854.But the problem still persists.I did not find any replies on SDN for this error,so posting it again.
If anyone knows how to proceed,please help! <REMOVED_BY_MODERATOR>
Thanks,
Sri
Edited by: Pravender on Dec 9, 2010 4:51 PM

the error might show due to which infoobject this error is happening.
that particular infoobject might conatin a transfer routine. Open the transfer routine in the infoobject, do a dummy change, save the routine and activate the infoobject, then try activating the DSO.
this might do the trick . Hope this helps.
rgds, Ghuru

Conversion error in company code currency for general costs activity

PS Experts,
Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
This is the scenario
Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
in the third activity (General act) in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
note: Company code curr same as projet curr & controlling area curr
Is there any setting is missing in customizing
Conversion error in company code currency for general costs activity 0010
Message no. CK443
Diagnosis
For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
Procedure
Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
Thanks

Hi Yassin,
I believe you have maintained exchange rates for rate type M as per your config in OPSB.
Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
This will solve your problem.
Regards,
Kabir

Projects Release - Error: Enter a Distribution Rule for Asset without val

Hi Experts ,
While Releasing Projects , we got error :
Enter a Distribution Rule for Asset without a Validity limit.
Message No : KD059.
Diagnosis:
The settelement Profile used requires you to define a distribution rule for asset . For period 005 , 2009 , however not created a distribution rule for Asset.
We gave checked Settelement Profile , still we are not clear what settings is causes for this error ,
Please throw some light on if some one come across ...
Regards,
Sujana

check out OSS note 115618

Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Jakarta Beanutils - Conversion rules for null

Hi all,
I am using the BeanUtils.copyProperties(target, source) method to copy my Struts ActionForm String-only fields into my Business JavaBean's typed fields (String, Boolean and Integer fields).
The thing I am having trouble understanding is if there is no request variable sent for a particular value, this value is null in the Struts action form - but the copyProperties method uses this null String to populate an Integer field on my business bean as new Integer(0) - and not simply populating this value with null.
This doesn't seem intuitive to me - if the HTML form had no value for a certain field, I expect both ActionForm and Business bean to also have a null value - the the form have the value "0", then I would expect this to get mapped through to new Integer(0) in the back end.
Is there any documentation that explain the default BeanUtils conversion rules, or ways or adjusting these rules programatically ?
I have browsed the jakarta site for a while, but not seem anything of immediate use, and google isn't helping at all !
Many thanks for you help,
Ben

It certainly seems that all null Strings get mapped to the "default primitive value" for the wrapper class - 0 for Integer, false for Boolean etc...
I think the problem here is I was looking for the copyProperties method to be a bijection (1 to 1 mapping) between String and Integer, e.g."1" maps to new Integer(1), and Integer(1) maps to "1"
"0" maps to new Integer(0), and Integer(0) maps to "0"
null String maps to null Integer, and null Integer maps to null StringBut it seems null String maps to new Integer(0), and new Integer(0) maps back to "0" - which is not my original value.
Anyone know how to force this behvaiour or explain why the library doesn't follow what is, AFAICT, a more logical conversion scheme ?

Error of "Not enough memory for operation" when exporting Crystal Report

Hi,
I am getting errors in Business Objects when I try to export a report from its native Crystal format to PDF (or Word). This is only happening in one of our many reports.
When I try to export within the Business Objects viewer (in Crystal format), then click the "Export this report" button, and select "Adobe Acrobat (PDF) as the File Format, click OK, I get the following error:
CrystalReportViewer
handleCrystalEvent failed
WebReporting.dll error '80004005'
Not enough memory for operation.
/InformationCentral/Viewers/crystal_viewer.asp, line 39
This also occurs if I try to export to PDF within the Crystal Report designer as well, but the error is a bit different:
"Failed to export report" then "Memory Full".
Strange one this is....

Hi Peter,
Could you try to minimize the records in the report by giving some additional conditions? May be like give the date range or select for few regions etc?
Try in such a way so that your report downloads less number of records.
Hope this helps.
Regards,
Rashmi

ALE : conversion rule for field value to become null

Dear experts,
I need to pass a material from one system to another with ALE. The problem is that the field marc-prctr (profit center) of this material is populated in the first system, but it does not exist in the second, so I assume transaction bd79 should be used to convert somehow the value of prctr to initial.
How can I do that??? I have already tried defining a conversion rule and assigning it to message type MATMAS, segment E1MARCM, but it did not work.
Please help.

Did you check this?<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm</a>

Error While creating a rule for trimming spaces

Hi All,
Please can you tell me the correct syntax for trimming the Spaces from the beginning of the word.
I tried like this but it is giving error as below:
BEGIN RETURN
ltrim($SPACES_TRIM, '');
END
ERROR: The return statement is expected to return a conditional value: found type<VARCHAR>. (COR-10622)
Please do help me its urgent.
Thanks & Regards,
DJ

Hi Deepak,
when you create validation rules they always have to return TRUE or FALSE conditions. (A record can pass or fail your expression.
So your expression above returns a VARCHAR string, as you can read in the User guide, you are replacing leading nothing '' at the beginning of your string $SPACES_TRIM.
You need to understand basic concept for validation rule expressions and use of functions.
There are lots of great product tutorials here on the SCN, that describe scope, features and functionalities of Information Steward, so you got a understanding of what you can do with IS.
NIels

Error to connecting business rules for Planning application outline

Hi all,
I recently migrated database schemas from uat to prod.i configured evrything successfully.when
I loged into EAS console with user(other than admin)that user has all acces to create business rules,
I tried to create new business rule to select planning application.
I am getting this error" error connecting to essbase server<servername>:<appname>
in error details "error connecting to pllanning server<servername>:<appname>"
and "error loading objects from data source:java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been closed."
Please anybody help on these
regards
vas

hi john,
we are using hyperion planning 9.3.1.1.11 version,
we were new installatalled Production server and configured,but i did not test the business rules in production server,
next my DBA exported Oracle Dabase Schemas from UAT server to Production sever those scema names are same in UAT and Production server,so my DBA droped The Schemas in production and replaced the UAT scemas in production server,
After i manually configured the production server with Migrated scemas, in configuration i changed the server names with production sever and Database names while configuration ,Hyperion planning datasource names are same in UAT and Production ,i manually edited the server names and Database names, i configured to For EAS ,Shared Services,Planning
Everything configured sucessfully,i am able to log on to application Planning url,and refreshed everything,
But i am logon to EAS console, i tried to create the Business rule with associate Planning Application I am getting this error Connecting to essbase server<server name>:<appname>
In error details "error connecting to pllanning server,servername>:<appname.
and error loading objects from datasource:com.java.sqlexception;[hyperion][oracle jdbc driver]object has been close.
please help on these
thanking you
srini

Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Similar Messages

Maybe you are looking for