Error in Global Conversion rule for InfoObject
Hi Gurus,
I am working on SAP NetWeaver 2004s BW 7.0, I have extracted the SD cube 0SD_C03(sales overview) content from the business content and noticed the infoobject's transfer rules are not active and when i tried to active them i am getting the following error "Error in global conversion rule fro infoObkect 0DOC_CATEG"
"NO PSA exits for the infoObject 0DOC_CATEG"
Please help me to resolve the problem.
Thanking you
Mrudul.
Hi,
This solution of dummy change in routine worked for me.
Thanks!!!
Regards,
Rohit
Edited by: Rohit Chhaparwal on Feb 23, 2010 12:18 PM
Similar Messages
-
Error in global conversion rule for InfoObject 0PERSLANGU when activating
Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
ChanduHI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya -
Error in global conversion rule for InfoObject 0INCOTERMS2
When I activate BI content 2LIS_12_VCITM with transfer rule, The transfer rule was error with the message " Error in global conversion rule for InfoObject 0INCOTERMS2" and Mgs No. 263.
The transfer rule cannot be activated.
I checked the 0INCOTERMS2 infoObject . The global conversion rule is no error.
The global conversion is in below.
============================================================
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0INCOTERMS2(000028) TYPE C.
Conversion rule for InfoObject 0INCOTERMS2
Data type = CHAR
ABAP type = C
ABAP length = 000028
FORM CONVERT_0INCOTERMS2
USING RECORD_NO LIKE SY-TABIX
SOURCE_SYSTEM TYPE RSA_LOGSYS
IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0INCOTERMS2 " InfoObject value
RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line -
TRANSLATE RESULT TO UPPER CASE.
$$ end of routine - insert your code only before this line -
ENDFORM.
=================================================================
If you have any idea or face the similar problem, please suggest solution.
Thank you.Good afternoon,
If you have not done so already can you apply the SAP note 1387854 in your system and it should prevent the problem from happening again. If you also reactivate the infoobject 0INCOTERMS2 in RSD1 then it should be possible to manually activate the transfer rule.
Best Regards,
Des -
Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT
Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes. -
Error in global conversion rule for 0DOC_CATEG
Hi Friends,
My transfer rules are inactive for 2LIS_11_VAITM. When i tried to get activate i am getting the below error message...
Error in global conversion rule for 0DOC_CATEG
How i can activate the transfer rules.
is there any global routine for this infoobject.
Please suggest a solution.
Thanks & Regards,
AnandHi Reddy,
Goto Change mode of the info object 0DOC_CATEG. Just edit the description of 0DOC_CATEG by adding a "." and activate it.
Again change the description by removing the "." and activate the info object.
After doing this, activate the transfer rules. It'll work fine.
-- Selva -
Errors with the global conversion rule for the field 0SOURSYSTEM.
Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKRI have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M -
Errors with the global conversion rule
Hi Guys,
When I activate the DSO,I get an error "Errors with the global conversion rule".I applied OSS note 1387854.But the problem still persists.I did not find any replies on SDN for this error,so posting it again.
If anyone knows how to proceed,please help! <REMOVED_BY_MODERATOR>
Thanks,
Sri
Edited by: Pravender on Dec 9, 2010 4:51 PMthe error might show due to which infoobject this error is happening.
that particular infoobject might conatin a transfer routine. Open the transfer routine in the infoobject, do a dummy change, save the routine and activate the infoobject, then try activating the DSO.
this might do the trick . Hope this helps.
rgds, Ghuru -
Projects Release - Error: Enter a Distribution Rule for Asset without val
Hi Experts ,
While Releasing Projects , we got error :
Enter a Distribution Rule for Asset without a Validity limit.
Message No : KD059.
Diagnosis:
The settelement Profile used requires you to define a distribution rule for asset . For period 005 , 2009 , however not created a distribution rule for Asset.
We gave checked Settelement Profile , still we are not clear what settings is causes for this error ,
Please throw some light on if some one come across ...
Regards,
Sujanacheck out OSS note 115618
-
Error when activating update rules for R/3 training and event management
hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D KrishnaHi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23 -
Error while installing transfer rules for 0PM_C03 from Business content
Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy -
Jakarta Beanutils - Conversion rules for null
Hi all,
I am using the BeanUtils.copyProperties(target, source) method to copy my Struts ActionForm String-only fields into my Business JavaBean's typed fields (String, Boolean and Integer fields).
The thing I am having trouble understanding is if there is no request variable sent for a particular value, this value is null in the Struts action form - but the copyProperties method uses this null String to populate an Integer field on my business bean as new Integer(0) - and not simply populating this value with null.
This doesn't seem intuitive to me - if the HTML form had no value for a certain field, I expect both ActionForm and Business bean to also have a null value - the the form have the value "0", then I would expect this to get mapped through to new Integer(0) in the back end.
Is there any documentation that explain the default BeanUtils conversion rules, or ways or adjusting these rules programatically ?
I have browsed the jakarta site for a while, but not seem anything of immediate use, and google isn't helping at all !
Many thanks for you help,
BenIt certainly seems that all null Strings get mapped to the "default primitive value" for the wrapper class - 0 for Integer, false for Boolean etc...
I think the problem here is I was looking for the copyProperties method to be a bijection (1 to 1 mapping) between String and Integer, e.g."1" maps to new Integer(1), and Integer(1) maps to "1"
"0" maps to new Integer(0), and Integer(0) maps to "0"
null String maps to null Integer, and null Integer maps to null StringBut it seems null String maps to new Integer(0), and new Integer(0) maps back to "0" - which is not my original value.
Anyone know how to force this behvaiour or explain why the library doesn't follow what is, AFAICT, a more logical conversion scheme ? -
ALE : conversion rule for field value to become null
Dear experts,
I need to pass a material from one system to another with ALE. The problem is that the field marc-prctr (profit center) of this material is populated in the first system, but it does not exist in the second, so I assume transaction bd79 should be used to convert somehow the value of prctr to initial.
How can I do that??? I have already tried defining a conversion rule and assigning it to message type MATMAS, segment E1MARCM, but it did not work.
Please help.Did you check this?<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/d3/06f6679aaf0e44b67ca6d6b58d91df/content.htm</a>
-
Error While creating a rule for trimming spaces
Hi All,
Please can you tell me the correct syntax for trimming the Spaces from the beginning of the word.
I tried like this but it is giving error as below:
BEGIN RETURN
ltrim($SPACES_TRIM, '');
END
ERROR: The return statement is expected to return a conditional value: found type<VARCHAR>. (COR-10622)
Please do help me its urgent.
Thanks & Regards,
DJHi Deepak,
when you create validation rules they always have to return TRUE or FALSE conditions. (A record can pass or fail your expression.
So your expression above returns a VARCHAR string, as you can read in the User guide, you are replacing leading nothing '' at the beginning of your string $SPACES_TRIM.
You need to understand basic concept for validation rule expressions and use of functions.
There are lots of great product tutorials here on the SCN, that describe scope, features and functionalities of Information Steward, so you got a understanding of what you can do with IS.
NIels -
Runtime Error while creation of rule for IU elimination
Hi,
Following runtime error occuring while creating a rule under IU elimination method.
Error analysis
A RAISE statement in the program "CL_UC_SINGLESELCOND_FACTORY===CP" raised the
exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program CL_UC_SINGLESELCOND_FACTORY===CP
Include CL_UC_SINGLESELCOND_FACTORY===CM001
Row 33
Module type (METHOD)
Module Name IF_UC_CUST_FACTORY~GET_INSTANCE_BY_GUID
Please advice...
Edited by: VNK on Nov 25, 2008 11:18 AMHi,
please check SAP note 859500:
- implement all relevant notes
- send a message to SAP support for checking and solving the GUID inconsistencies.
best regards
Thomas -
Error to connecting business rules for Planning application outline
Hi all,
I recently migrated database schemas from uat to prod.i configured evrything successfully.when
I loged into EAS console with user(other than admin)that user has all acces to create business rules,
I tried to create new business rule to select planning application.
I am getting this error" error connecting to essbase server<servername>:<appname>
in error details "error connecting to pllanning server<servername>:<appname>"
and "error loading objects from data source:java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been closed."
Please anybody help on these
regards
vashi john,
we are using hyperion planning 9.3.1.1.11 version,
we were new installatalled Production server and configured,but i did not test the business rules in production server,
next my DBA exported Oracle Dabase Schemas from UAT server to Production sever those scema names are same in UAT and Production server,so my DBA droped The Schemas in production and replaced the UAT scemas in production server,
After i manually configured the production server with Migrated scemas, in configuration i changed the server names with production sever and Database names while configuration ,Hyperion planning datasource names are same in UAT and Production ,i manually edited the server names and Database names, i configured to For EAS ,Shared Services,Planning
Everything configured sucessfully,i am able to log on to application Planning url,and refreshed everything,
But i am logon to EAS console, i tried to create the Business rule with associate Planning Application I am getting this error Connecting to essbase server<server name>:<appname>
In error details "error connecting to pllanning server,servername>:<appname.
and error loading objects from datasource:com.java.sqlexception;[hyperion][oracle jdbc driver]object has been close.
please help on these
thanking you
srini
Maybe you are looking for
-
when I run through https://testconnectivity.microsoft.com and do the Lync test for logging in we get: Couldn't sign in. Error: Error Message: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provid
-
Changing XY graph to multiple plot freezes labview
Hi, I have a 0-dimensional XY graph which is part of a fairly big VI which I want to change to a mulitple plot version. However, when I wire an array of XY-data clusters instead of just an XY data cluster LabView 2014 freezes and crashes: LV freezes
-
KeyStore/ Certificates stored by the JRE Runtime
Hi! I use this code KeyStore ks = KeyStore.getInstance("pkcs12"); ks.load(new FileInputStream("test.p12", "password".toCharArray()); to load a certificate for signing a PDF with the help of iText. The code works fine. The same certificate was importe
-
Hi all, In the shopping cart in 7.0, the field Product Category Description is only displaying text to 20 characters. When I check the table, the field mask is 80 characters. Can you please advise, how do I get the actual field character length of
-
Dear All, Our's is extended classic scenario. In our organisation under one company there are totally 4 plants. But in SRM point of view all the organisations are assigned to one plant (eg. plant 0001). So all the po's has to be created against one