Error in installing windows 2008 r2 sp 1 element not found

error in installing windows 2008 r2 sp 1 element not found

Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • Error after install iTunes setup: Apple application Support was not found

    Hello,
    I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
    Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
    I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
    Apple Application Support was not found
    Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
    I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
    Anyone please has some advice?
    Thanks in advance!
    Marieke

    When I look at my control panel the only program that shows is "I Tunes".  No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
    That's an extreme case of this.
    We'll try doing standalone installations of all the supporting programs.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
    Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
    Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
    Do those four installs go through okay? If so, does your iTunes launch without any errors now?

  • Error  while installing forms 4.5 client w32prd.tmp not found

    can someone tell me about w32prd.tmp file.I copied it to the setup folder from forms 5.0 installtion cd. machine is on windows NT 4.0.

    You need to install them in 2 different Oracle_homes.
    Is there any specific reason that you use such old versions? Isn't it time you get up to speed with some more updated version?

  • Error while installing Xcelsius 2008

    Hi,
    We are getting error while installing Xcelsius 2008  version 5.3.....
    "The upgrade patch cannot be installed by windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch"
    Kindly suggest how to install the Xcelsius latest verion.
    With Regards,
    Pearl

    Hi Pearl,
    Sorry if you've already done this, but have you installed Xcelsius 2008 SP3 first?  It sounds like you are trying to install a fix pack without first installing Xcelsius 2008.
    The downloads are all available from the [downloads service market place|http://www.sdn.sap.com/irj/boc/] (as per the stickied thread)
    If you choose Service Pack as the software type it will allow for download of the SP3 full install.
    OR
    Could it be this issue [Xcelsius FP3.5 error installing Excel2010; with solution from F. Kooij if you are referring to the latest fix pack 3.5 with Office 2010?
    Regards,
    Paul
    Edited by: zygorf on May 24, 2011 12:53 PM

  • Install windows 2008 server r2 as a vm on windows 8.1 pro

    I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
    thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
    It boots up but when I try to do anything. It goes into  netio.sys BSOD issue

    I haven't run into that problem, but when setting up the OS, just
    remove the NIC from the settings, do the install, make sure it's running, then install the integration
    services, reboot, then add the NIC back in. 
    You could also use a legacy network adapter if that doesn't work.
     In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
    Bob Comer Microsoft MVP -- Hyper-V

  • Error message when installing iTunes on Windows 7, "Apple Application Support was not found, Error 2"

    I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
    is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open  Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    I am using follwoing string
     <connectionStrings>
    <add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
     </connectionStrings>
    Guide me What I do?

    Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
    the DSN. It's better if you add a System DSN.
    Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
    driver specified". See this KB article:
    http://support.microsoft.com/kb/942976/en-us

  • HT1846 gtp error while installing windows from usb! how to solve it.

    gtp error while installing windows from usb! how to solve it.

    Hello mmarti,
    Thanks for using Apple Support Communities.
    Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen.  See page 6 of the following PDF:
    http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    Take care,
    Alex H.

  • Installing Windows 2008 Server on Intel Raid (MEGAIDE)

    I am facing the intolerable issue of trying to install Windows 2008 Server on a machine that has 2 drives configured for mirroring using the Intel RAID settings in the bios.  (MEGAIDE) 
    In Windows 2003 you faced the dubious task of having to do the F6 to install the 3rd party RAID drivers.
    In Windwos 2008 Server, you are able to load the drivers on a memory stick and browse the drivers.
    I downloaded the drivers for Windows 2003 Server since there are no drivers posted for 2008 from the Intel website.
    http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2162&OSFullName=Windows+Server*+2003+Enterprise+x64+Edition&lang=eng&strOSs=111&submit=Go%21
    The installer recognized them when I browsed the media, but they did not load.
    Any suggestions would be appreciated.
    Thanks,
    Mark

    Hi,
    I have the SE7230NH1-E Intel motherboard and it finnaly work for me using the driver from Asus but for motherboard. 
    P5BV-C/4L
    http://ca.asus.com/fr/Server_Workstation/Server_Motherboards/P5BVC4L/#download
    Version  4.4.0208.2008
    Description
    ICH7R LSI RAID Driver
    LSI Embedded MegaIDE Driver V4.4.0208.2008 for Windows Server 2008 32/64 bit.

  • Possibilty of Installing Windows 2008 on Xserve

    Hi All
    We have newly purchased Xserve with Snore Leopard installed. I just want to installed Windows 2008 and see how it is compatibility with Windows. Please advice whether I can install Windows 2008 on the same Hardware.
    Regards
    Nirukshitha

    Xserve with Snore Leopard installed.
    I suggest you wake the Leopard up before trying the emulation, it might sleep though it

  • Windows 2008 server (64 bit) setup not starting?

    To all,
    Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?

    Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
    Downloaded
    Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
    and
    Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
    Edited by: user731811 on Oct 14, 2010 1:11 PM

  • ITunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed.

    I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission.  I have administrative rights... please, any help and/or ideas will be appreciated.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Windows 2008 R2 WDS service is not start.

    Hi,
    Windows 2008 R2 WDS service is not start.
    I am facing the below error on it.
    Please help to resolve.
    -Thanks
    Ashish Dubey

    Hi Ashish,
    Before going further, we can open Event Viewer to see whether some related error events were logged.
    For now, we can refer to the article and thread below to troubleshoot the issue.
    Microsoft WDS Error "the service did not respond to the start or control request in a timely fashion
    http://linkdottech.wordpress.com/2011/12/04/microsoft-wds-error-the-service-did-not-respond-to-the-star-or-control-request-in-a-timely-fashion/
    Please Note: Since the web site is not hosted by Microsoft, the link may
    change without notice. Microsoft does not guarantee the accuracy of this information.
    Windows Deployment Services Error: The service did not respond to the start or control request in a timely fashion.
    http://social.technet.microsoft.com/Forums/en-US/5f71f652-ac73-4290-817e-5a251b7852b4/windows-deployment-services-error-the-service-did-not-respond-to-the-start-or-control-request-in-a?forum=winservergen
    Besides, if the server has more than 20 logical processors, the Windows Deployment Service cannot be started and we apply the hotfix in the following article to fix
    the issue.
    The Windows Deployment Service cannot be started on a computer that has more than 20 logical processors and that is running Windows Server 2008 R2 or Windows Server
    2008
    http://support.microsoft.com/kb/2121690/en-us
    Best regards,
    Frank Shen

  • An error occurred while reconnecting P: to \\JSERVER\Data Microsoft Windows Network: The network path was not found. This connection has not been restored.

    Almost every day when I open my computer I get this message:
    An error occurred while reconnecting P: to \  \  JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
    We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
    fix this? 

    it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
    I assume you are running a backup of some sort as this is the backup forum..

  • T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no netowork

    T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no network,  so installed drivers for the chipset and network. Still no way to go on inernet.
    Folloing drivers i installed from following site. What do I do now:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT035703
    Oss50w – chipset driver
    7ora09ww – Ethernet driver
    1ywc54ww – wifi driver

    Hi guys and thanks for your help. Yes, after authenication and working on this Windows partition, I have less than 3GB space. Also, I cannot drag and drop files from desktop, like a text file into the Windows partition. Says it doesn't have permissions to drop files.
    It looks like now I will in fact have to start from scratch and repartition the HD but put in a minimal 12GB or so into the Windows partition. Also, I tried to name the Windows label, but it's locked and under get info, it says the Windows partition is read only, ownership grayed out and says it is NT coded format. Shouldn't that be MS-DOS or FAT 32 automatically?
    I have to tell all of you that this is getting time consuming, too complicated and when I get my own ProBook, I have no desire to install VISTA or MS whatever. Plus, we have to still do the MS security pack updates and install virus software for the Windows partition, isn't that correct?
    Is there a step by step link here like a BootCamp/Windows XP Pro installation tutorial so I can move a bit faster on my next attempt?
    Thanks SteveB

Maybe you are looking for

  • SSRS web services 401 if you pass "Authorization" http header

    We use both SSRS 2008 R2 and 2012. When i access a report using url access (direct ssrs server hit) and add a "Authorization: Bearer xyzelkalklsjsdfalsjdf" http header, i get a 401 from somewhere in the request pipeline. I have a custom httpmodule re

  • Java Applet fails to start, but Java is installed correctly

    Hello, I have tried everything to get Java functioning in our IT rooms, different versions, permissions, etc. But to no avail, we are behind a DMZ and a Proxy Server. This only occours when logged in as a student (differnt proxy server, with filterin

  • TABLE CONTROL IN SUBSCREEN

    Hi experts, In module pool programming in main screen i have added one sub screen.in subscreen i added one table control.my problem is i am not able to get cursor position in table controland how to disable the records in table control.how to enable

  • How to set a date string in a textbox which bind to a Date type datasource

    Hi, I found i can't set a default date value in a textbox which bind to a Date type datasource. Even i tried copying a date string which is picked by the calendar date picker and copy the exactly same string into my source code. It just doesn't work

  • Help: i can't open all microsoft programs

    hi i am a newbie... i can't open all my microsoft programs from words to entourage after a software update... i try reinstalling and deleting files but it won't work... save me!!!